Ropex for Service call 1-336-969-0110 at Industrial Electronics Repair

Ropex Service & Repair Forum

The Ropex RES-440-L/400VAC 744013 Control Unit is still down. Please prioritize fixing this issue and provide an update

—> Purchase or Repair:

— Posted by Howard Robertson on 2014-07-29

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "Ropex"

Ropex → Ropex 0 740302 ↗
Ropex → Ropex RES-403/230VAC 740302 ↗

If you need your Ropex unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 106 Comments

#Ropex by Ben Cooper on 2012-04-21 03:09

I'm experiencing some issues with the Ropex 0 740302 machine. It's a Temperature Controller, but I'm unsure about its functionality. Something seems to have stopped working, and I would appreciate some assistance to troubleshoot and resolve the problem.

—> Purchase or Repair:

#Ropex by regis on 2014-05-05 11:20

One of the Ropex RES-440-L/400VAC 744013 units in the warehouse is displaying unusual behavior. It is not operating as it normally does.

—> Purchase or Repair:

#Ropex by bliss on 2012-01-17 12:45

The Ropex RES-403/230VAC 740302 controller is displaying error code E-25 and showing a constant alarm for "overvoltage." The equipment is not responding or functioning properly. Please advise on troubleshooting steps or repair recommendations. Thank you.

—> Purchase or Repair:

#Ropex by Peter John VRIEZEMA on 2012-01-04 02:41

The Ropex 0 740302 is a temperature controller that isn't functioning correctly. The maintenance team needs assistance with this unit.

—> Purchase or Repair:

#Ropex by McLaren on 2014-02-19 16:19

The Ropex RES-440-L/400VAC 744013 Control Unit is still down. Need a response

—> Purchase or Repair:

#Ropex by Kiphart on 2012-03-02 04:10

Ropex RES-403/230VAC 740302 controller failure. Need to replace drive or board ASAP.

—> Purchase or Repair:

#Ropex by Mitul Ravat on 2014-02-14 19:58

the Ropex RES-440-L/400VAC 744013 Control Unit went down mid-shift. Needs attention ASAP. Thanks!

—> Purchase or Repair:

#Ropex by Valadka on 2014-09-24 00:23

The Ropex RES-440-L/400VAC 744013 is a Control Unit that is currently not functioning properly.

—> Purchase or Repair:

#Ropex by Kaichen on 2012-06-11 09:05

The Ropex RES-403/230VAC 740302 unit is not functioning. Please investigate the issue. Thank you.

—> Purchase or Repair:

#Ropex by AGUSTI on 2012-10-28 22:03

the Ropex RES-403/230VAC 740302 controller unit went down mid-shift. Needs attention ASAP. Thanks.

—> Purchase or Repair:

#Ropex by Hesham on 2012-10-21 06:18

Hey, the Ropex 0 740302 temperature controller just crapped out on us. Gotta fix this ASAP to keep things running smoothly.

—> Purchase or Repair:

#Ropex by Phillip E Mead on 2025-09-19 20:11

Request Service for RopexModel/Part : 744013 Res 440 L 400Vac Control Unit

—> Purchase or Repair:

#Ropex by manop on 2014-12-04 04:23

I've noticed that the Ropex RES-440-L/400VAC 744013 control unit seems to have stopped functioning properly. It's difficult to pinpoint the exact issue without further investigation. I recommend having a technician take a look to diagnose and repair the problem.

—> Purchase or Repair:

#Ropex by Tusen on 2014-03-28 22:52

Ropex RES-440-L/400VAC 744013 Control Unit not responding to power-up, no display, no audible alerts.

—> Purchase or Repair:

#Ropex by WALSON on 2012-05-22 09:25

Ropex 0 740302 temperature controller malfunctioning, affecting production line operation. Uptime critical, require immediate repair service for swift resolution.

—> Purchase or Repair:

#Ropex by Jeffrey on 2012-03-25 01:08

The Ropex RES-403/230VAC 740302 controller unit is malfunctioning, causing a significant disruption to our production line. Immediate action is required to rectify this issue

—> Purchase or Repair:

#Ropex by GRAPHIQUE on 2012-04-14 19:33

My Ropex RES-403/230VAC 740302 industrial unit stopped working suddenly. Need a specialist to repair the controller ASAP.

—> Purchase or Repair:

#Ropex by alex zhusma on 2014-12-17 02:44

I'm having trouble with the Ropex RES-440-L/400VAC 744013 control unit. It seems like something has stopped working. I'm not really sure what the issue is, but I wanted to reach out for help.

—> Purchase or Repair:

#Ropex by MUHAMMAD JAMIL AKHTER on 2012-09-19 21:15

I need urgent assistance with Ropex 0 740302, the Temperature Controller. The unit is still down. Please respond

—> Purchase or Repair:

#Ropex by MOHAMED DRICI on 2012-08-24 08:00

The Ropex 0 740302 Temperature Controller is not functioning properly.

—> Purchase or Repair:

#Ropex by Juan C Perez on 2014-05-04 00:20

One of the Ropex RES-440-L/400VAC 744013 units in the warehouse is exhibiting unusual behavior. It is not functioning as expected, but I am not able to provide a specific term for the malfunction.

—> Purchase or Repair:

#Ropex by Bondan Susilo Rahardjo on 2012-02-08 08:55

The Ropex 0 740302 Temperature Controller unit isn't working as reported.

—> Purchase or Repair:

#Ropex by Faheem on 2012-07-31 14:37

Looking for a technician to repair my Ropex RES-403/230VAC 740302 controller unit. It's not functioning correctly and needs immediate attention. Please let me know if you can assist with fixing this industrial unit.

—> Purchase or Repair:

#Ropex by Rainbow on 2012-08-06 09:24

Could you please confirm whether the Ropex 0 740302 Temperature Controller is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:

#Ropex by Danielglota on 2014-12-22 01:44

Hello, Can the Ropex RES-440-L/400VAC 744013 Control Unit be repaired or replaced? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:

#Ropex by Essam Mohamed Atef on 2012-09-19 18:15

Ropex RES-403/230VAC 740302 controller is not responding to any input commands.

—> Purchase or Repair:

#Ropex by kimon vidalis on 2014-12-21 01:44

Do you have a Ropex RES-440-L/400VAC 744013 Control Unit available for sale or repair? Need it urgently to keep production running. Thank you.

—> Purchase or Repair:

#Ropex by Gallo on 2014-12-31 22:54

The Ropex RES-440-L/400VAC 744013 control unit experienced a malfunction earlier today, leading to unexpected downtime. It occurred at approximately 230 PM during the production shift. Could you please provide some insight into what might have caused this issue? Thank you, and looking forward to you…Purchase or Repair:

#Ropex by Dustin Pham on 2014-12-23 17:06

The Ropex RES-440-L/400VAC 744013 control unit is displaying error code E5 and the alarm keeps going off intermittently causing the equipment downtime. Please advise on the troubleshooting steps urgently.

—> Purchase or Repair:

#Ropex by CALLAN on 2012-06-15 04:28

The Ropex RES-403/230VAC 740302 controller malfunctioned at 1145 PM, causing unexpected downtime. Urgent response needed before the next shift.

—> Purchase or Repair:

#Ropex by Steve Grom on 2014-12-26 03:27

Just had a failure on the Ropex RES-440-L/400VAC 744013 Control Unit, likely a drive or board issue. Will troubleshoot and update as needed.

—> Purchase or Repair:

#Ropex by muhammad Nouman on 2014-11-21 10:12

Could you please confirm if the Ropex RES-440-L/400VAC 744013 Control Unit is still supported, and if replacement parts are available for it? Thank you.

—> Purchase or Repair:

#Ropex by Jarkko on 2012-02-09 14:35

The Ropex RES-403/230VAC 740302 controller on Unit X went down during the night shift. Need to investigate and repair ASAP. Can you take care of it during the day shift? Thanks.

—> Purchase or Repair:

#Ropex by Richard VanSchuyver on 2012-06-12 17:13

The Ropex 0 740302 Temperature Controller is displaying Error Code E-301, preventing the equipment from turning on. Please advise on troubleshooting steps or arrange for a technician to inspect it. Thank you.

—> Purchase or Repair:

#Ropex by kevin whiteway on 2014-02-18 05:12

The Ropex RES-440-L/400VAC 744013 control unit went down mid-shift. Please check and repair first thing in the morning.

—> Purchase or Repair:

#Ropex by Peek on 2012-04-20 12:05

Do you have a Ropex 0 740302 Temperature Controller available for sale or repair? It's urgent for production continuity. Thank you.

—> Purchase or Repair:

#Ropex by Dustin Chase on 2012-09-03 15:46

One of the Ropex 0 740302 Temperature Controllers just died on us needs immediate attention. I'm heading over to the next machine now.

—> Purchase or Repair:

#Ropex by POLINTAN on 2012-11-21 10:47

I'm sorry to hear that your Ropex 0 740302 is not working properly. It seems like the temperature controller is having issues, but I'm not entirely sure since I am a front-office employee. I recommend contacting our technical team for further assistance with troubleshooting.

—> Purchase or Repair:

#Ropex by Fencer on 2012-06-15 08:28

Need someone to fix my Ropex RES-403/230VAC 740302, it's a controller. What's causing the unit to malfunction? Would appreciate a quick response to get it up and running again.

—> Purchase or Repair:

#Ropex by Ing. Jose Calos Pinto on 2012-08-02 21:55

Hello, I'm interested in purchasing the Ropex RES-403/230VAC 740302 controller. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:

#Ropex by renante on 2014-12-19 13:44

Looking for a technician to repair my non-functioning Ropex RES-440-L/400VAC 744013 Control Unit. It's not powering up despite proper connections. Need urgent assistance.

—> Purchase or Repair:

#Ropex by selastin on 2012-01-18 11:39

Hello, the Ropex RES-403/230VAC 740302, which is the controller unit, malfunctioned today and caused downtime around 230 PM. Please provide a quick update before the next shift arrives. Thank you.

—> Purchase or Repair:

#Ropex by wbjs on 2012-12-02 10:13

The Ropex RES-403/230VAC 740302 controller is showing error code E102, indicating a communication failure with the main unit. Equipment is currently down, affecting production. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:

#Ropex by LaCruze on 2012-02-24 00:21

The Ropex 0 740302 temperature controller is displaying Error Code E21, indicating a malfunction with the temperature sensor. Equipment is not regulating temperature properly, causing inconsistencies in production. Please advise on troubleshooting steps or schedule a technician visit for repair. —> …Purchase or Repair:

#Ropex by Ajardy Dias Alves on 2012-05-26 22:04

The Ropex 0 740302, which is a Temperature Controller unit, malfunctioned earlier today causing unexpected downtime. It happened during the night shift between 200 AM and 300 AM. Please provide guidance on what actions need to be taken to prevent this from reoccurring. Thank you. —> …Purchase or Repair:

#Ropex by Don Pritchard on 2014-12-25 17:06

We experienced downtime due to a malfunction with the Ropex RES-440-L/400VAC 744013 Control Unit. The issue occurred during the previous shift. Can you provide some insights about what went wrong and any recommendations for troubleshooting before the next shift begins?

—> Purchase or Repair:

#Ropex by Risso on 2012-09-20 21:49

The Ropex RES-403/230VAC 740302 is displaying Error Code E101 indicating a potential communication issue. Please advise on troubleshooting steps to resolve. Thank you.

—> Purchase or Repair:

#Ropex by Wayne fLEMING on 2014-12-31 13:54

Hi there, could you please provide repair information for a Ropex RES-440-L/400VAC 744013 Control Unit? It's urgent, thank you!

—> Purchase or Repair:

#Ropex by Dave Borgfield on 2014-01-07 05:22

The Ropex RES-440-L/400VAC 744013 unit is not functioning properly. Please take a look as soon as possible. Thank you.

—> Purchase or Repair:

#Ropex by sampaio on 2014-10-06 03:39

Experiencing issues with Ropex RES-440-L/400VAC 744013 Control Unit. Need assistance with repair or diagnostics ASAP. Please reply if you can help. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.