Ropex for Service call 1-336-969-0110 at Industrial Electronics Repair

Ropex Service & Repair Forum

There was a downtime incident with the Ropex RES-440-L/400VAC 744013 Control Unit. Please provide a quick summary of what happened and when the incident occurred. Thank you.

—> Purchase or Repair:

— Posted by Valdis Kundzins on 2014-12-27

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "Ropex"

Ropex → Ropex 0 740302 ↗
Ropex → Ropex RES-403/230VAC 740302 ↗

If you need your Ropex unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 104 Comments

#Ropex by roland MIRANDA on 2012-09-13 09:08

My Ropex 0 740302, which I believe is a Temperature Controller, is experiencing some issues. Something seems to have stopped working, and I'm unsure how to troubleshoot it. Any guidance or support would be greatly appreciated.

—> Purchase or Repair:

#Ropex by Mitul Ravat on 2014-02-14 19:58

the Ropex RES-440-L/400VAC 744013 Control Unit went down mid-shift. Needs attention ASAP. Thanks!

—> Purchase or Repair:

#Ropex by Don Pritchard on 2014-12-25 17:06

We experienced downtime due to a malfunction with the Ropex RES-440-L/400VAC 744013 Control Unit. The issue occurred during the previous shift. Can you provide some insights about what went wrong and any recommendations for troubleshooting before the next shift begins?

—> Purchase or Repair:

#Ropex by AARON RYE on 2012-06-02 00:47

Hello, do you have a Ropex 0 740302 Temperature Controller available for purchase to keep our production running? Thank you.

—> Purchase or Repair:

#Ropex by Wentworth on 2014-01-04 06:11

The Ropex RES-440-L/400VAC 744013 Control Unit isn't working.

—> Purchase or Repair:

#Ropex by eugenio cortis on 2012-08-02 20:55

Can the Ropex RES-403/230VAC 740302 controller be repaired or should it be replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:

#Ropex by McLaren on 2014-02-19 16:19

The Ropex RES-440-L/400VAC 744013 Control Unit is still down. Need a response

—> Purchase or Repair:

#Ropex by Jeffrey on 2012-03-25 01:08

The Ropex RES-403/230VAC 740302 controller unit is malfunctioning, causing a significant disruption to our production line. Immediate action is required to rectify this issue

—> Purchase or Repair:

#Ropex by Chaney on 2014-12-04 02:23

The Ropex RES-440-L/400VAC 744013 Control Unit is not working.

—> Purchase or Repair:

#Ropex by Rafael Wischkin on 2014-02-12 05:58

Could you please advise if the Ropex RES-440-L/400VAC 744013 Control Unit is still supported or if replacement parts are available for it? We have an older unit but are unsure of the manufacturer.

—> Purchase or Repair:

#Ropex by Richard VanSchuyver on 2012-06-12 17:13

The Ropex 0 740302 Temperature Controller is displaying Error Code E-301, preventing the equipment from turning on. Please advise on troubleshooting steps or arrange for a technician to inspect it. Thank you.

—> Purchase or Repair:

#Ropex by kevin whiteway on 2014-02-18 05:12

The Ropex RES-440-L/400VAC 744013 control unit went down mid-shift. Please check and repair first thing in the morning.

—> Purchase or Repair:

#Ropex by Jinnings on 2012-04-23 22:21

Could you please confirm if the Ropex RES-403/230VAC 740302 Controller is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:

#Ropex by Kyle and Kay Conant on 2014-02-20 03:00

Ropex RES-440-L/400VAC 744013 Control Unit is displaying error code E4 and not responding to any inputs.

—> Purchase or Repair:

#Ropex by Howard Robertson on 2014-07-29 07:24

The Ropex RES-440-L/400VAC 744013 Control Unit is still down. Please prioritize fixing this issue and provide an update

—> Purchase or Repair:

#Ropex by rick rodriguez on 2014-08-13 17:22

the Ropex RES-440-L/400VAC 744013 control unit went down during the shift. Needs attention ASAP. Thanks.

—> Purchase or Repair:

#Ropex by Otto Schmidt on 2012-01-31 02:03

The Ropex RES-403/230VAC 740302 controller is displaying error code E07, causing the equipment to malfunction. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:

#Ropex by regis on 2014-05-05 11:20

One of the Ropex RES-440-L/400VAC 744013 units in the warehouse is displaying unusual behavior. It is not operating as it normally does.

—> Purchase or Repair:

#Ropex by AGUSTI on 2012-10-28 22:03

the Ropex RES-403/230VAC 740302 controller unit went down mid-shift. Needs attention ASAP. Thanks.

—> Purchase or Repair:

#Ropex by wbjs on 2012-12-02 10:13

The Ropex RES-403/230VAC 740302 controller is showing error code E102, indicating a communication failure with the main unit. Equipment is currently down, affecting production. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:

#Ropex by Don Havener on 2012-01-28 15:12

I'm having trouble with the Ropex 0 740302, which I believe is a Temperature Controller. It seems that something has stopped working, and I'm unsure how to fix it. Any assistance or guidance would be greatly appreciated.

—> Purchase or Repair:

#Ropex by Ben Cooper on 2012-04-21 03:09

I'm experiencing some issues with the Ropex 0 740302 machine. It's a Temperature Controller, but I'm unsure about its functionality. Something seems to have stopped working, and I would appreciate some assistance to troubleshoot and resolve the problem.

—> Purchase or Repair:

#Ropex by Risso on 2012-09-20 21:49

The Ropex RES-403/230VAC 740302 is displaying Error Code E101 indicating a potential communication issue. Please advise on troubleshooting steps to resolve. Thank you.

—> Purchase or Repair:

#Ropex by Dave Borgfield on 2014-01-07 05:22

The Ropex RES-440-L/400VAC 744013 unit is not functioning properly. Please take a look as soon as possible. Thank you.

—> Purchase or Repair:

#Ropex by Kristie Thompson on 2014-12-24 04:06

Looking for repair for Ropex RES-440-L/400VAC 744013 Control Unit unit not powering up or responding to controls. Please contact if you can troubleshoot and repair

—> Purchase or Repair:

#Ropex by bliss on 2012-01-17 12:45

The Ropex RES-403/230VAC 740302 controller is displaying error code E-25 and showing a constant alarm for "overvoltage." The equipment is not responding or functioning properly. Please advise on troubleshooting steps or repair recommendations. Thank you.

—> Purchase or Repair:

#Ropex by Choptuik on 2014-12-27 22:06

Can you please confirm if the Ropex RES-440-L/400VAC 744013 Control Unit is still supported or if replacement parts are available for it? Thank you.

—> Purchase or Repair:

#Ropex by kimon vidalis on 2014-12-21 01:44

Do you have a Ropex RES-440-L/400VAC 744013 Control Unit available for sale or repair? Need it urgently to keep production running. Thank you.

—> Purchase or Repair:

#Ropex by MitchelJege on 2014-03-13 16:02

I'm having trouble with the Ropex RES-440-L/400VAC 744013. The control unit seems to have stopped working properly. I'm not sure what the issue is, but your help would be greatly appreciated.

—> Purchase or Repair:

#Ropex by Peek on 2012-04-20 12:05

Do you have a Ropex 0 740302 Temperature Controller available for sale or repair? It's urgent for production continuity. Thank you.

—> Purchase or Repair:

#Ropex by Peter John VRIEZEMA on 2012-01-04 02:41

The Ropex 0 740302 is a temperature controller that isn't functioning correctly. The maintenance team needs assistance with this unit.

—> Purchase or Repair:

#Ropex by Fencer on 2012-06-15 08:28

Need someone to fix my Ropex RES-403/230VAC 740302, it's a controller. What's causing the unit to malfunction? Would appreciate a quick response to get it up and running again.

—> Purchase or Repair:

#Ropex by LaCruze on 2012-02-24 00:21

The Ropex 0 740302 temperature controller is displaying Error Code E21, indicating a malfunction with the temperature sensor. Equipment is not regulating temperature properly, causing inconsistencies in production. Please advise on troubleshooting steps or schedule a technician visit for repair. —> …Purchase or Repair:

#Ropex by bunyamin on 2014-12-16 21:44

The Ropex RES-440-L/400VAC 744013 Control Unit is still down. We need a response as soon as possible. Thank you.

—> Purchase or Repair:

#Ropex by Faheem on 2012-07-31 14:37

Looking for a technician to repair my Ropex RES-403/230VAC 740302 controller unit. It's not functioning correctly and needs immediate attention. Please let me know if you can assist with fixing this industrial unit.

—> Purchase or Repair:

#Ropex by Pascal Cesar on 2014-12-26 02:27

The unit RES-440-L/400VAC 744013 is currently not working. It is identified as a Control Unit.

—> Purchase or Repair:

#Ropex by Kft. on 2012-07-27 15:19

Ropex 0740302 displaying error code E4, generating high temp alarm. Equipment down, urgent assistance needed.

—> Purchase or Repair:

#Ropex by Rainbow on 2012-08-06 09:24

Could you please confirm whether the Ropex 0 740302 Temperature Controller is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:

#Ropex by Tusen on 2014-03-28 22:52

Ropex RES-440-L/400VAC 744013 Control Unit not responding to power-up, no display, no audible alerts.

—> Purchase or Repair:

#Ropex by tim stokolosa on 2014-05-02 22:20

Hello, I am interested in purchasing a Ropex RES-440-L/400VAC 744013 Control Unit. Could you please provide me with information regarding pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:

#Ropex by muhammad Nouman on 2014-11-21 10:12

Could you please confirm if the Ropex RES-440-L/400VAC 744013 Control Unit is still supported, and if replacement parts are available for it? Thank you.

—> Purchase or Repair:

#Ropex by Kaichen on 2012-06-11 09:05

The Ropex RES-403/230VAC 740302 unit is not functioning. Please investigate the issue. Thank you.

—> Purchase or Repair:

#Ropex by Gallo on 2014-12-31 22:54

The Ropex RES-440-L/400VAC 744013 control unit experienced a malfunction earlier today, leading to unexpected downtime. It occurred at approximately 230 PM during the production shift. Could you please provide some insight into what might have caused this issue? Thank you, and looking forward to you…Purchase or Repair:

#Ropex by john naud on 2014-12-26 08:06

I am experiencing an issue with the Ropex RES-440-L/400VAC 744013 Control Unit where something seems to have stopped working. I am uncertain about the exact nature of the problem, but could you please provide assistance with troubleshooting it? Thank you.

—> Purchase or Repair:

#Ropex by Kaschak on 2014-03-25 06:30

There was a downtime incident with the Ropex RES-440-L/400VAC 744013 Control Unit. It occurred during our shift on . Need a quick update before next shift comes in.

—> Purchase or Repair:

#Ropex by Essam Mohamed Atef on 2012-09-19 18:15

Ropex RES-403/230VAC 740302 controller is not responding to any input commands.

—> Purchase or Repair:

#Ropex by R. R. SARAF on 2012-01-17 04:16

Ropex RES-403/230VAC 740302 controller not responding to input commands, halting production.

—> Purchase or Repair:

#Ropex by wassim chaar on 2012-03-24 23:08

Just found out that the Ropex RES-403/230VAC 740302 controller has failed. Need to get a replacement ASAP to keep things running smoothly. Will update once it's fixed.

—> Purchase or Repair:

#Ropex by Dantonio on 2012-02-09 22:35

Can you please confirm if the Ropex RES-403/230VAC 740302 controller is still supported? We are looking for replacement or repair options for this unit, but we are unsure about its manufacturer. Your assistance would be greatly appreciated. Thank you.

—> Purchase or Repair:

#Ropex by Kiphart on 2012-03-02 04:10

Ropex RES-403/230VAC 740302 controller failure. Need to replace drive or board ASAP.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.