Siemens Service & Repair Forum

The Siemens 6AV7428-2FA10-0BS0 PANEL isn't functioning correctly. Please investigate and make necessary repairs.

—> Purchase or Repair: Ticket Image

— Posted by rajiv ranjan on 2009-06-25

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Siemens"

If you need your Siemens unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 128 Comments

#Siemens by anupam on 2011-12-19 14:42
Siemens 685139 E1721-A88 circuit board failure on the shop floor. Need immediate replacement to resume production.

—> Purchase or Repair:
#Siemens by Bill Irby on 2013-06-11 00:00
Of course! Could you provide some additional details to help me understand what's happening with the unit? For example, is it making strange noises, emitting unusual smells, not powering on, displaying error messages, or behaving erratically in any way? The more information you can provide, the bett…Purchase or Repair: Ticket Image...
Show More
#Siemens by Lee Winquist on 2005-07-04 00:13
The Siemens 6ES7 654-5SA02-0XX0 module is not functioning. Please advise.

—> Purchase or Repair:
#Siemens by paul.wang on 2019-03-05 13:58
The Siemens 6ES7151-7FA21-0AB0 S7 Failsafe CPU with Profibus Interface is currently not functioning.

—> Purchase or Repair:
#Siemens by Bruce Welborn on 2023-03-05 01:26
The Siemens S7 module (6ES7 655-1AX13-0AX0) is not working as reported.

—> Purchase or Repair:
#Siemens by Manmeet Chawla on 2024-04-02 00:06
Hello, I hope this message finds you well. We are inquiring about the Siemens 6ES5 241-1AB21 IP241 Incremental Positioning Module. Could you please provide information on whether this unit is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:
#Siemens by Michael Gordon on 2015-08-26 00:00
Siemens 6es5-421-8ma12 showing no power, not responding to inputs. Need urgent repair assistance.

—> Purchase or Repair:
#Siemens by Roche Malan on 2025-02-12 05:38
The Siemens 12762120014, Description 611 6SN1124-1AA00-0CA1 50A Servo Drive unit is not functioning properly. Please investigate and troubleshoot as needed.

—> Purchase or Repair:
#Siemens by rodrigo alliende on 2011-10-17 01:45
Siemens 685139 E1721-A88 is currently down, showing error code E32. Circuit board seems to be malfunctioning. Please advise on possible causes and solutions as soon as possible. Thank you.

—> Purchase or Repair:
#Siemens by Chris Werner on 2011-06-10 17:24
Siemens 65E3226 8DJ40 drive not responding to control inputs.

—> Purchase or Repair:
#Siemens by Klaus Eisner on 2011-08-18 19:22
Siemens 685139 E1721-A88 machine not powering on.

—> Purchase or Repair:
#Siemens by Larry Youhanaian on 2011-02-08 19:56
We experienced downtime due to a malfunction with Siemens 685139 E1721-A88 circuit board. It occurred at 645 am today. Please advise on troubleshooting steps. Thank you.

—> Purchase or Repair:
#Siemens by noto on 2011-11-13 15:15
Do you have a Siemens 685139 E1721-A88 circuit board available for sale or repair? Our unit is down and we need it to maintain production.

—> Purchase or Repair:
#Siemens by john viering on 2023-02-11 12:19
the Siemens 6SE7041-8HK85-1HA0 (Rectifier Interface Module) went down during the night shift. Need someone to check and fix it ASAP. Thanks!

—> Purchase or Repair:
#Siemens by damir cvetko on 2017-01-19 23:34
Sure! Could you please provide more details on how the Siemens 6SN1118-0NH00-0AA1 611 Servo Control Module is acting weird? Some common issues include erratic movements, unusual sounds, error messages on the display, or failure to respond to commands. The more specific information you provide, the b…Purchase or Repair: Ticket Image...
Show More
#Siemens by James L Dean on 2023-10-26 00:00
Siemens C98043-A1113-L132 Equipment IssueHello,I'm currently experiencing an issue with our Siemens C98043-A1113-L132 equipment. It is displaying an error code "Unknown" and not functioning correctly. We are unable to identify the problem and require immediate assistance to get the equipment back up…Purchase or Repair: Ticket Image...
Show More
#Siemens by muiefam on 2019-03-05 03:00
Hello, I'm interested in purchasing the Siemens 6SE3116-8CB70-4AA0 Micromaster 1.5Kw Inverter. Can you provide information on pricing and availability? I'm trying to source one quickly. Thank you!

—> Purchase or Repair:
#Siemens by MUSOVSKI on 2024-06-14 07:44
The Siemens 6ES5 242-1AA32 experienced a malfunction today, causing downtime in the production unit. The issue occurred at 1130 AM and is critical for our operations. Any quick information on what went wrong would be greatly appreciated before the next shift. Thank you.

—> Purchase or Repair:
#Siemens by Samuel Yonathan on 2023-11-21 00:00
Received alert for Siemens g22901-d0058-l-a1 drive or board failure. Will investigate and resolve ASAP.

—> Purchase or Repair:
#Siemens by Marcos Y. Kono on 2011-09-19 15:52
The Siemens 65E3226 8DJ40 drive in the warehouse is not functioning as usual. It is displaying unusual behavior that is not typical of its normal operations.

—> Purchase or Repair:
#Siemens by J Murphy on 2011-04-23 22:25
One of the Siemens 65E3226 8DJ40 units in the warehouse is displaying unusual behavior. It's not functioning as it normally does, and its actions are erratic and unpredictable.

—> Purchase or Repair:
#Siemens Connectors by Jasper Winslow on 2025-12-25 09:58
Hi there,This is Jasper from Virtual Hand Support. We provide Virtual Assistants to help with:- Managing social media accounts- Cold calling- Administrative support- Customer service- Data entry- Prospecting- Calendar management- Email management- Market research- Content creation- And much moreResp…Purchase or Repair: Ticket Image...
Show More
#Siemens by rajeev khandelwal on 2008-07-16 09:33
dear sir we from new delhi need the part no LGB 21 (made in germany) company make siemens please let me know where we get this parts thanksrajeev9868812902

—> Purchase or Repair:
#Siemens by Willians Quintino on 2025-05-16 18:13
Hi, could you please provide repair information for Siemens module 6ES7 741-0BC11-0CA1? Thank you!

—> Purchase or Repair:
#Siemens by John Montana on 2022-05-16 05:14
Hello, I was informed that the Siemens 6SL3210-1PB13-0AL0 unit, which is a SINAMICS G120 Power Module, is not functioning. Can you provide more details about the issue so we can troubleshoot and resolve it

—> Purchase or Repair:
#Siemens by T.J. Toney on 2025-06-01 20:18
Siemens 6FC3241-0AA-Z, Sinumerik 810 T GA2 Controller experienced downtime today during the night shift at 200 AM. Need a quick answer before the next shift arrives.

—> Purchase or Repair:
#Siemens by Sergey Perov on 2012-06-23 00:00
Siemens 6SE3114-0DC40 showing no response or power when activated. Need assistance troubleshooting and repairing this industrial unit

—> Purchase or Repair:
#Siemens by Ray Buckman on 2011-11-11 22:27
Experiencing error code E1721-A88 on Siemens 685139 circuit board. Equipment currently down, urgent repair needed to resume operations.

—> Purchase or Repair:
#Siemens by chisty on 2023-07-06 01:40
The Siemens PE0520 is displaying a red flashing LED indicating a low input voltage alarm. Machine is currently not operational. Thanks.

—> Purchase or Repair:
#Siemens by Jennifer Walker on 2020-09-25 08:04
The Siemens 6ES7 314-1AE83-0AB0 S7 module is not working. Please check and repair as needed. Thank you.

—> Purchase or Repair:
#Siemens by Motairi-Al, on 2011-06-17 13:57
the Siemens 685139 E1721-A88 circuit board unit went down mid-shift. Need someone to check it out ASAP.

—> Purchase or Repair:
#Siemens by Jaime Palacios on 2011-09-05 12:37
Experiencing issues with my Siemens 685139 E1721-A88 circuit board. Need repair for industrial unit ASAP. Any experts available for troubleshooting and fixing the problem?

—> Purchase or Repair:
#Siemens by chris mariano on 2011-07-20 01:08
Siemens 65E3226 8DJ40 drive just failed, need immediate attention to troubleshoot and repair. Continuing with rounds.

—> Purchase or Repair:
#Siemens by John Maurer on 2011-04-14 16:28
Could you please confirm if Siemens 685139 E1721-A88 circuit board is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:
#Siemens by justin igarashi on 2007-09-10 00:00
Urgent Equipment Issue - SIEMENS SINUMERIK PCU 50.3-CHello,Our SIEMENS SINUMERIK PCU 50.3-C is down and displaying an unknown error. The system is not responding, and we are unable to access any functions. Urgent assistance is needed to diagnose and resolve this issue.Thank you.—> …Purchase or Repair: Ticket Image...
Show More
#Siemens by landon on 2025-05-31 11:41
Can the Siemens 6FX8002-3AC01-1AB0 interface cable be repaired or bought? Trying to check this off my to-do list.

—> Purchase or Repair:
#Siemens by Yves Janin on 2024-11-17 11:17
Siemens 6ES7 212-1BA00-4BA0 S7 Module malfunctioning, affecting production line. Urgent repair needed to resume operations.

—> Purchase or Repair:
#Siemens by Shanahan on 2023-12-25 00:00
Hey, the SIEMENS SIMATIC PANEL 6AV6643-0BA01-1AX0 went down mid-shift. Tried troubleshooting, but issue remains unknown. Need a daytime follow-up to investigate further.

—> Purchase or Repair:
#Siemens by Aubrey Fleming on 2011-01-10 17:16
The circuit board of our Siemens 685139 E1721-A88 is malfunctioning, causing a significant disruption in our production line. This issue needs urgent attention and immediate repair to minimize downtime. Please prioritize this repair request to ensure swift resolution.

—> Purchase or Repair:
#Siemens Connectors by Kyree HVACservice on 2026-01-28 13:57
Hey, We send HVAC companies unlimited pre-qualified homeowners who want changeouts for $850 a month. No junk leads and no new software to learn. We just live-transfer the qualified appointments to you. I made a 2-minute video showing exactly how the math works, want me to send it over?Thanks—> …Purchase or Repair: Ticket Image...
Show More
#Siemens by JAE on 2014-02-12 17:58
The Siemens Acramatic 2100 3-424-2130A01 unit is not working and the maintenance team needs assistance with it.

—> Purchase or Repair:
#Siemens by GUERRERO on 2016-02-15 04:35
Siemens 77-949-2300 840C Operator Interface Power Supply malfunctioned. Need to swap out ASAP to get machine back online.

—> Purchase or Repair:
#Siemens by Domingo Galán on 2011-12-17 02:20
We need urgent attention regarding the Siemens 685139 E1721-A88 circuit board. The unit is still down. Please reply

—> Purchase or Repair:
#Siemens by SHARIF. on 2018-03-26 05:31
Could you please confirm if the Siemens 6SE9521-0DC40 5HP Inverter is still supported or if replacement parts are available for this older unit?

—> Purchase or Repair:
#Siemens by Nia Kurniati on 2014-05-06 14:20
Could you please provide information on whether the Siemens Acramatic 2100 3-424-2130A01 Monitor/Controller is still supported, or if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#Siemens by Rafael Hernández on 2014-12-20 00:44
Need assistance with Siemens Acramatic 2100 3-424-2130A01 monitor/controller repair. Unit fails to power on, display screen remains blank. Seeking immediate repair service. Thank you.

—> Purchase or Repair:
#Siemens by Donald C Bailey on 2025-05-25 00:30
Equipment down. Siemens 3RK1400-0CD00-0AA0 showing error code "X" on interface PCB. Urgent attention needed.

—> Purchase or Repair:
#Siemens by ramson on 2011-03-30 21:08
Hello, I am reaching out on behalf of my client who is experiencing an issue with their Siemens 685139 E1721-A88 circuit board. Could you please provide more information about potential repair options and pricing for this particular part? Thank you.

—> Purchase or Repair:
#Siemens by Luis Lerman Agudelo Bermudez on 2025-05-16 22:04
the Siemens 6DS1308-8AB (Teleperm M AS230 Interface Module) unit went down mid-shift. Need someone to follow up and look into it during the day. Thanks!

—> Purchase or Repair:
#Siemens by Dennis Ingalls on 2011-09-25 10:25
Could you please confirm if the Siemens 65E3226 8DJ40 drive is still supported or if replacement parts are available for this unit, considering its age and the uncertainty about the manufacturer? Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.