Stanley for Service call 1-336-969-0110 at Industrial Electronics Repair

Stanley Service & Repair Forum

The Stanley 1804 gate control board unit is not working.

—> Purchase or Repair:

— Posted by michelle simmons on 2015-02-17

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "Stanley"

Stanley → Stanley 540 1804 02 ↗
Stanley → Stanley 025-010013-00 1804 02 ↗
Stanley → Stanley 1100B 111173 ↗
Stanley → Stanley 1804 ↗

If you need your Stanley unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 126 Comments

#Stanley Access Technologies by FRANCISCO SOLIS on 2015-08-06 20:20

The Stanley Access Technologies 1100B (Model 111173) is displaying a constant red flashing light on the PC Assembly Board. This may indicate a critical error affecting the equipment's functionality. Please advise on immediate troubleshooting steps or arrange for repair as soon as possible. —> …Purchase or Repair:

#Stanley Access Technologies by Babariya on 2012-05-15 04:21

The unit doesn't seem to be functioning properly. Please repair it as soon as possible.

—> Purchase or Repair:

#Stanley by Daugherty on 2015-07-20 05:20

Could you please assist in determining if the Stanley 025-010013-00 1804 02 Gate Control Board is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:

#Stanley Access Technologies by Holly Sparks on 2012-09-11 09:14

The Stanley Access Technologies 1100B 516212H gate controller is malfunctioning, causing a halt in the production line. Urgent repair service needed to ensure swift resolution and resume production

—> Purchase or Repair:

#Stanley Access Technologies by guru on 2012-04-20 19:44

The drive or board on our Stanley Access Technologies 1100B 516212H Gate Controller has failed needs immediate attention. Heading over to check it out now.

—> Purchase or Repair:

#Stanley by MERRILL Wilson on 2010-10-22 21:29

The Stanley 540 1804 02 gate opener board is exhibiting abnormal behavior. When activated, it is not responding as it typically does. It seems to be malfunctioning in some way.

—> Purchase or Repair:

#Stanley by GLENN REVEL on 2010-07-16 00:09

the Stanley 540 1804 02 gate opener board went down during the night shift. Needs attention ASAP!

—> Purchase or Repair:

#Stanley Access Technologies by rumanto on 2015-12-11 08:15

Stanley Access Technologies 1100B 111173 PC Assembly Board is not powering on.

—> Purchase or Repair:

#Stanley Access Technologies by JOE V. VELASCO on 2012-12-28 01:33

Need repair for Stanley Access Technologies 1100B 516212H gate controller unit. Stops responding intermittently, affecting access control. Requires urgent technical assistance.

—> Purchase or Repair:

#Stanley Access Technologies by jessie on 2012-03-29 14:34

Do you have a Stanley Access Technologies 1100B 516212H Gate Controller available for sale or repair? Our production is depending on it, and we need a solution fast. Thank you.

—> Purchase or Repair:

#Stanley Access Technologies by Herbert Tang on 2012-05-07 05:16

Can the Stanley Access Technologies 1100B 516212H Gate Controller be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:

#Stanley by hidayat on 2015-07-13 12:20

Gate control board Stanley 025-010013-00 1804 02 has failed. Need replacement ASAP to restore gate operation.

—> Purchase or Repair:

#Stanley by naveen on 2010-09-21 20:51

Hi, I'm inquiring about repairing a Stanley 540 1804 02 gate opener board for a client. Would you be able to provide information on how to troubleshoot and potentially fix this issue? Thank you.

—> Purchase or Repair:

#Stanley Access Technologies by Jashid on 2012-03-08 10:32

Could you please confirm if the Stanley Access Technologies 1100B 516212H Gate Controller can be repaired or needs to be replaced? I'm looking to check this off my to-do list. Thank you.

—> Purchase or Repair:

#Stanley Access Technologies by Floyd Maguire on 2012-01-05 13:19

The Stanley Access Technologies 1100B 516212H is not working. Please check and repair as necessary. Thank you.

—> Purchase or Repair:

#Stanley Access Technologies by RAFAEL BETANCOURT Z on 2012-07-09 12:00

I'm experiencing some issues with the Stanley Access Technologies 1100B 516212H Gate Controller. It seems like something has stopped working, but I'm not exactly sure what the problem is. Could someone take a look and provide some assistance?

—> Purchase or Repair:

#Stanley by Daniel Anton on 2010-11-17 18:17

I need repair for my Stanley 540 1804 02 gate opener board. The gate is not responding, need help fixing it ASAP.

—> Purchase or Repair:

#Stanley Access Technologies by David A Dixon on 2012-03-12 12:55

The Gate Controller unit on the Stanley Access Technologies 1100B 516212H is malfunctioning, causing a critical production line outage. Please prioritize this issue for immediate repair to resume operations

—> Purchase or Repair:

#Stanley by Buchanan on 2015-07-08 19:32

I'm having some trouble with the Stanley 1804 Gate Control Board. It seems like something has stopped working, but I'm not entirely sure what the issue is. Do you have any insight into how to resolve this problem?

—> Purchase or Repair:

#Stanley by Martusciello on 2015-02-23 07:47

Hello, we need repair info for a Stanley 1100B 111173 gate system controller board. It stopped working, and we can't find a replacement. Urgently need your assistance. Thank you.

—> Purchase or Repair:

#Stanley Access Technologies by michael kennedy on 2012-08-10 06:11

I'm following up on the previous message regarding the Stanley Access Technologies 1100B 516212H Gate Controller. The unit is still down. Please provide an update on the status of the repair as soon as possible. Thank you.

—> Purchase or Repair:

#Stanley by N RAO on 2015-07-30 04:20

The Stanley 1804 gate control board unit isn't working as reported.

—> Purchase or Repair:

#Stanley Access Technologies by Sergio Sanchis Francés on 2012-01-29 20:44

Stanley Access Technologies 1100B 516212H is not responding to control inputs, preventing production from running.

—> Purchase or Repair:

#Stanley Access Technologies by TOBY ANDERSON on 2015-01-06 18:41

The PC Assembly Board on the Stanley Access Technologies 1100B 111173 line is malfunctioning, causing a production stoppage. Urgent repair is needed to resume operations.

—> Purchase or Repair:

#Stanley Access Technologies by Nanev on 2012-07-05 17:40

the Stanley Access Technologies 1100B 516212H gate controller unit went down during our shift. Need someone to check it out during the day.

—> Purchase or Repair:

#Stanley by Jim WIlson on 2015-07-09 08:32

The Stanley 1804 Gate Control Board in the warehouse is malfunctioning - it is exhibiting unusual behavior and not functioning as expected.

—> Purchase or Repair:

#Stanley by hawkins on 2015-08-16 10:20

The Stanley 1804 02 Gate Control Board is not working as reported.

—> Purchase or Repair:

#Stanley Access Technologies by ycktrading on 2015-07-20 17:20

The Stanley Access Technologies 1100B 111173 PC Assembly Board is not working.

—> Purchase or Repair:

#Stanley Access Technologies by mervyn roe on 2012-05-26 21:04

The gate controller for the Stanley Access Technologies 1100B 516212H is malfunctioning, causing a significant disruption to the production line. Please address this issue urgently to minimize downtime and restore operations

—> Purchase or Repair:

#Stanley by HUOZAIFA SHAKIR on 2015-04-10 04:58

Hello, I'm interested in purchasing a Stanley 1804 Gate Control Board, but I'm not entirely certain if this is the correct model. Could you please provide information regarding pricing and availability? I need to source one

—> Purchase or Repair:

#Stanley Access Technologies by C.K. on 2015-07-29 04:20

Hi, I'm reaching out on behalf of a client with a Stanley Access Technologies 1100B 111173 PC Assembly Board that needs repair. Can you provide information on the services you offer for this part? Thank you.

—> Purchase or Repair:

#Stanley by Electrical on 2010-08-28 17:14

I am following up regarding the Stanley 540 1804 02 gate opener board. The unit is still down. Please provide an update at your earliest convenience. Thank you.

—> Purchase or Repair:

#Stanley by licda on 2015-07-28 15:20

The Stanley 025-010013-00 1804 02 Gate Control Board is not functioning properly. It is exhibiting unusual behavior that is different from its normal operation.

—> Purchase or Repair:

#Stanley by JACK L FEAK on 2015-08-11 09:20

The Stanley 025-010013-00 1804 02 is a Gate Control Board that is not working properly. Please check and repair as needed.

—> Purchase or Repair:

#Stanley Access Technologies by JOHN CALLAHAN on 2012-05-29 21:30

Just had a failure on the Stanley Access Technologies 1100B 516212H gate controller. Need immediate attention to diagnose and repair.

—> Purchase or Repair:

#Stanley Access Technologies by larry buscemi on 2012-04-05 20:39

Please provide an update on the status of the Stanley Access Technologies 1100B 516212H Gate Controller as it is still down. Your

—> Purchase or Repair:

#Stanley by Semchuk on 2015-08-10 01:20

The unit isn't working. It's the Gate System Controller Board for Stanley 1100B 111173.

—> Purchase or Repair:

#Stanley Access Technologies by Glenn Brewster on 2012-09-21 00:49

The Stanley Access Technologies 1100B 516212H gate controller unit is not working according to the shop.

—> Purchase or Repair:

#Stanley by craig darcangelo on 2015-08-03 13:20

Could you please confirm if the Stanley 1100B 111173 Gate System Controller Board is still supported, or if there are any replacement or repair options available for this unit? We are unsure of the manufacturer due to its age. Thank you.

—> Purchase or Repair:

#Stanley by vipal on 2010-04-01 07:21

We experienced downtime due to a malfunction with the Stanley 540 1804 02 gate opener board earlier today. It occurred around 1045 AM and caused delays in gate operations. Can you please provide a quick update before the next shift begins? Thank you.

—> Purchase or Repair:

#Stanley Access Technologies by Faizal on 2012-02-12 17:14

Hello, I am reaching out regarding a Stanley Access Technologies 1100B 516212H gate controller that is in need of repair. Can you provide me with more information on the services you offer for this particular model? Thank you.

—> Purchase or Repair:

#Stanley Access Technologies by Vuorinen on 2012-07-03 22:18

The Stanley Access Technologies 1100B 516212H gate controller is not responding to any commands and is preventing production from coming back online.

—> Purchase or Repair:

#Stanley by Minchow on 2010-09-19 02:20

The Stanley 540 1804 02 gate opener board is not working as reported.

—> Purchase or Repair:

#Stanley by Shah on 2010-02-20 16:42

Hello, I'm interested in purchasing a Stanley 540 1804 02 gate opener board. I'm not 100% sure if this is the right model, but my team suggested I inquire. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:

#Stanley Access Technologies by hejl on 2012-01-02 20:11

Gate controller not responding to commands.

—> Purchase or Repair:

#Stanley by Nikola Zivkovic on 2015-07-18 01:20

Do you have a Stanley 025-010013-00 1804 02 Gate Control Board available for sale or repair? This unit went down, and I need to keep production running. Thank you.

—> Purchase or Repair:

#Stanley Access Technologies by megha meshram on 2012-02-03 02:52

Hello, our Stanley Access Technologies 1100B 516212H gate controller is showing error code E302. The gate is not responding to commands and is stuck in a halfway open position. Please advise on the next steps for troubleshooting and repairing. Thank you.

—> Purchase or Repair:

#Stanley by Dirk on 2015-03-10 03:13

Do you have a replacement board available for Stanley 025-010013-00 1804 02 Gate Control Board to keep production running?

—> Purchase or Repair:

#Stanley Access Technologies by Dempster on 2012-04-11 16:22

Hello, we have a Stanley Access Technologies 1100B 516212H Gate Controller that stopped working. We need repair info urgently. Can you provide assistance? Thank you.

—> Purchase or Repair:

#Stanley by steve swihart on 2015-08-14 10:20

The Stanley 1804 Gate Control Board isn't working. Please investigate and address the issue

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.