Techmalux for Service call 1-336-969-0110 at Industrial Electronics Repair

Techmalux Service & Repair Forum

We are a state school and have a Charmilles wire EDM machine. It has a Techmalux light assb. # 591-034-003 (other numbers,D-78727, SE/418, IP67) We have repaired it a couple of times but it has started to leak and has stopped working. I was looking for a replacement cost. As you probably know it is a 24VAC, 24\", 18 watt florescent Bulb.Thanks,Stanley Goodman615-741-1241

— Posted by Stanley E. Goodman on 2005-08-10

Reply🗨️Ask a New Question Below❓

If you need your Techmalux unit tested or repaired,
give us a call at 1-336-969-0110.
We offer fair estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 23 Comments

#Techmalux by Donald Albin, Maintenance Dept. on 2005-05-20 15:29

I have a defective light as described above. Can you either repair this light or supply us with a replacement? Thanks

#Techmalux by Sales on 2005-05-20 21:26

There are many different versions of the TECHMALUX HALOGEN LAMPS SE-418, SE-436, KE-418, KE-424, KE-436, etc Do you have a model number for the unit?

#Techmalux by Scott B. on 2005-06-22 15:08

I would like to know a price on a techmalux light #591-054-006, KE /418, 24 vdc/18w. Thank You.

#Techmalux by Stanley E. Goodman on 2005-08-10 17:00

We are a state school and have a Charmilles wire EDM machine. It has a Techmalux light assb. # 591-034-003 (other numbers,D-78727, SE/418, IP67) We have repaired it a couple of times but it has started to leak and has stopped working. I was looking for a replacement cost. As you probably know it is ...
Show More

#Techmalux by Jon Tylock on 2005-08-15 15:44

I am interested in replacing this light. Please, send me pricing and availability information. Thank you.

#Techmalux by Miroslaw Bator on 2005-10-26 16:13

Advise price and delievery time for new light fixture, LUMOLUX KE/418 24VDC/18W art. no- 591-054 006How much would cost to repair an old one?Please advise A.S.A.P

#Techmalux by Mike Brooks on 2005-11-09 13:54

Dear Sir or Madam,We are looking for a supply of lights for a MAHA MOT lift.The light package is numbered: 4967 and is a 4\' light tube. The lift is a 4 post 3.5tPlease supply delivery & price in sterling.Thank you,Mike Brooks

#Techmalux by GARY MACEY on 2006-03-01 08:36

We have a machine with a ke/418 model lamp fitted. Is there any uk based suppliers that we can contact to repair/purchase a new lamp.best regardsGary MaceyMacvere Engineering Ltd

#Techmalux by DWIGHT KEARNEY on 2008-04-04 17:50

I HAVE A LAMP; THAT CAME IN A CHARMILLES MODEL 290 EDM WIRE MACHINE. MY COLLEAUGE HAS PREVIOUSLY HAD THEM SHIP HIM A REPLACEMENT BALLAST BOARD FOR THIS LAMP AND THE PART THAT THEY SENT WAS NOT A DIRECT REPLACEMENT. I CONTACTED THE CUSTOMER SERVICE DEPARTMENT FROM CHARMILLES TO GET TECH INFORMATION O...
Show More

#Techmalux by David on 2008-07-16 16:18

What is the cost for a Lumllux KE/418 glass tube that protects the light bulb and fixture?Regards,Dave

#Techmalux by Chris Taylor on 2008-08-05 19:01

A couple of weeks ago, we had sent in a techmalux light to be repaired. (light is from a Citizen swiss turn machine). I was just wondering if you could let me know what the repair status is on this.Thank you,Chris TaylorCarolina Precision Mfg.1183 Gateway Dr.Mooresville, NC 28115ph. 704 662-3480fax ...
Show More

#Techmalux by Christi Fogler on 2008-12-16 21:00

I have 2 lights needing repair. The glass tubes are gone and the bulbs need replacing. The unit is a Lumolux K/136 with an article # of 591-019-014. What type of turn around could I expect on the units? They are 120V / 60Hz 36w units.Christi

#Techmalux by GLEN TAYLOR on 2009-03-20 22:59

CAN YOU SUPPLY THE 70mm GLASS TUBE FOR A TECHMALUX LAMPLUMOLUX KE/224 591 049 024REGARDS,GLEN

#Techmalux by eduardo murga tome on 2009-04-18 16:14

se me ha estropeado una tarjeta electronica de un fluorescente estanca de 24 v corriente alterna necesitaria una de repuestola referencia que tiene la tarjeta es la siguiente485-000-04724 vac/18 wnr-4353

#Techmalux by chip tipton on 2009-07-16 12:30

I have two ea l425-kbt015 bulb need repaired, how long does this usally take to repair ? regards,chip

#Techmalux by Lucia Valdez on 2010-02-18 18:48

HelloPlease quote on pricing and availability on Techmalux Lomolux light # 591-019-014 for 1pc.Thank you,Regards,Lucia ValdezOMA IndustriesTel. 956-454-2599Fax 956-424-3969

#Techmalux by Aldo G. Quilang on 2010-03-30 02:09

Specifcation;Lumolux-K220vac 36WArt. Nr. 960 036 301

#Techmalux by Andreas Reiter on 2010-08-23 08:04

We are distributor of Techmalux.Do you still need this light??Best regards,Andreas ReiterFNF Industrietechnik GmbHHuelsmeyer Str.: 32D-49406 Eydelstedt / Germany Tel.: +49 (0) 5442-804798-0Fax: +49 (0) 5442-804798-20E-Mail: Info@FNF-Industrietechnik.com

#Techmalux by Dan deMackiewicz on 2010-11-12 22:34

We have about 47 machines with KE/418G 24 V DC lights in them.We are having a problem with a light that goes out after several hours of operation.Is there a part we can buy to fix this?

#Techmalux by Gloria Pai on 2011-01-05 08:53

Dear Sir,I need one set of LUMOLUX K2/026, 26W ohne VG, Art number 591-042-001, and one piece of lamp 26W.Could you please give me your quotation. Thank you.With best regards,Gloria PaiSun Shine Gear Co., Ltd100, Chiu Se Lane, Pei Tun District 406, Taichung, Taiwan

#Techmalux by wayne sanders on 2012-05-24 20:05

We have been using Techmalux, Lumolux lights. A lot of failures in electronic base. Are they worth repairing? Rough cost? I have about 8 bases #410-000-022 from light #K2E/413 ( #591-026-010 ). I thought it may be fuse. Fixed one.

#Techmalux by Carlos Gonzalez on 2018-12-31 20:19

My Techmalux KE/418 lamp is not turning on despite multiple attempts to power it up. It seems to be a potential issue with the power supply or the internal wiring. I would appreciate a repair service assessment to determine the exact problem and estimate the replacement cost, especially if the unit ...
Show More

#Techmalux by Sales on 2022-05-25 17:56

The Techmalux KE/418 lamp is not turning on when the switch is pressed. The issue may be related to a faulty power supply or a burnt-out bulb. If the unit's value is high, the estimated replacement cost for repair could range from $50 to $100, depending on the extent of the issue and parts needed. I...
Show More

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.