Teijin Seiki for Service call 1-336-969-0110 at Industrial Electronics Repair

Teijin Seiki Service & Repair Forum

Subject Teijin Seiki ARS15-06 Vigoservo Repair InquiryDear Repair Shop,I am reaching out on behalf of a client who is experiencing issues with their Teijin Seiki ARS15-06 Vigoservo (part number ARS15-06). The client has reported a problem with the functioning of the servo system and is in need of repair services.Could you please provide details on the repair process, estimated timeline, and cost associated with addressing this issue? Any information you could provide would be greatly appreciated.Thank you for your

— Posted by paul myers on 2013-10-08

Reply🗨️Ask a New Question Below❓

If you need your Teijin Seiki unit tested or repaired,
give us a call at 1-336-969-0110.
We offer fair estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 62 Comments

#Teijin Seiki by Frank Taylor on 2006-07-01 01:23

We need a manual for the Teijin Seiki AR60 drive.Thanks

#Teijin Seiki by KENNY SMITH on 2006-07-18 14:51

FRANK TAYLOR, IF YOU STILL NEED IT, I HAVE A COPY OF THE AR60 OPERATION MANUAL ON MY COMPUTER. I AM CURRENTLY HAVING TROUBLE WITH MINE AND WAS ABLE TO GET ONE FROM MY MACHINE MANUFACTURER. I WILL GLADLY EMAIL IT TO YOU. IT IS 170 PAGES LONG SO AN EMAIL ADDRESS WITH A LARGE CAPACITY IS NEEDED FOR ME ...
Show More

#Teijin Seiki by Ricardo Villada on 2006-11-29 18:51

HelloI need a manual for ani AR vigo servo (best for ARS30).Tank you

#Teijin Seiki by Dave Keeton on 2007-02-23 14:59

If you still have a copy of that manual I could sure use it...... Dave Keeton

#Teijin Seiki by Anthony Leung on 2007-04-03 04:26

I need the manual for the VIGOSERVO ARS30.ThanksAnthony Leung

#Teijin Seiki by MIKE PIERCE on 2007-08-07 14:16

We have the above mentioned unit for our kitamura cnc and the one that the maintenance company supplied does not work, can you rebuild this unit? are they available for purchase as rebulit units.thanks

#Teijin Seiki by Tom on 2007-09-21 14:37

We have purchased a used machine with an ar60 drive which we are having trouble with. I having been looking for the manual and found this thread. if you could send me a copy it would be greatly appreicated.Thank youTom T

#Teijin Seiki by Sam on 2007-10-18 22:50

Hi I\'m also in need of this manual desperately. If you could email me a copy it would be appreciated

#Teijin Seiki by Agoes on 2007-10-24 04:37

We need Ar series manual for set the parameter on my drive teijin seiki ARS30, because the battery has dropped.thanks

#Teijin Seiki by KRIANGKRAI PHROMPAK on 2008-03-10 09:47

I NEED MANUAL FOR THE SERVO DRIVE TEIJIN SEIKI AR60 THANKS YOU

#Teijin Seiki by Alain JOUSSET on 2008-07-30 06:21

Bonjour,Nous sommes à la recherche d\'un variateur TEIJIN SEIKIIndications relevées sur variateur en panneAR15A 120 - BA0S/N 1H 185C/N 488 406Dans l\'attente de votre réponse.SalutationsAlain JOUSSET

#Teijin Seiki by kim young gill on 2008-09-03 08:24

dear sirwe need repiar center near korea or japanhow can repiar pls show me the way(tel nomber )we will waiting reflythank you

#Teijin Seiki by zhou xiang on 2008-10-13 02:37

Hello!can you tell me what is the mean abuot the alarm code:E-109 about VIGOSERVO ARS30.thank you very very much!Zhou Xiang

#Teijin Seiki by Daniel on 2008-10-13 06:00

Anyone can help me on the error code \"E-109\"?Thx in advance!Daniel (Ji_shiao@hotmail.com)

#Teijin Seiki by duc quang on 2009-05-20 07:08

Can you please send me manual for vigo sevo ARS30

#Teijin Seiki by Nguyen Duc Quang on 2009-05-25 02:48

My company purchased Machine Centre style: MH4BN, serial no: 6AAA059. now it trouble ATC(auto tool charge), driver ( Vigo servo ARS30) loss parameter cause drop battery. Can you please send me manual for vigo servo ARS30.Nguyen Duc QuangEquipment departmentDiesel Song Cong Company.AD: Song Cong town...
Show More

#Teijin Seiki by javier on 2009-06-19 00:26

mi nombre es javier trabajo para una empresa de macanizados de presicion en una de las maquinas que atiendo tengo un SERVO VIGO ARS 30 el cual trabaja con un magacine y se para poniendo en el visor la siguiente incripsion E__9 nesesitaria si fuese posible me pasaran por mail un listado de los errore...
Show More

#Teijin Seiki by A. Enrique Soto on 2009-06-19 00:43

i need a list of code error or user manual of VIGOSERVO ARS 30.in the display appear the code E 09 ? and then cycle stop.if thi\'s possible i\'m greateful for delivery quick.thanks for your attention.

#Teijin Seiki by fabio vettori on 2009-06-29 08:37

list alarm tanks you for cooperation

#Teijin Seiki by JIM WILLIAMS on 2009-07-01 10:21

I AM LOOKING FOR MANUALS FOR THIS POWER SUPPLY AND MOTOR. WE HAVE ONE ON TWO OF OUR MACHINES BUT HAVE NO BREAK DOWN ON THE PARTS OTHER THAN THE ALARM LIST AND PARAMETER LIST. CAN YOU HELP?THANKS, JIM WILLIAMS

#Teijin Seiki by ingouf on 2009-08-26 08:35

Hi,Is it possible to have a manual maintenance about a TELJI SEIKI drive model VIGO SERVO ARS60-15. Because i have an alarm E-14, or more explanation about this fault.thank you for your help.Best regardswilfrid ingouf

#Teijin Seiki by Antonio Perrotta on 2009-08-26 16:08

Dear SirsI need an ARS30 service manual Your help will be much appreciate.Many thanks Antonio Perrotta

#Teijin Seiki by BICOT Luc on 2009-12-10 17:10

Hi,I have an ARS15 and i need to put new parameters on it.I can read it but cannot write in the servo.Could you explain me the process to re-enter the parameters please !Thanks a lot and best regards.Luc BICOT

#Teijin Seiki by Peter Mueller on 2010-03-24 06:07

HiPlease let me know which of the two Units ARS60-15 or ARS135-25replaces AR60B120-BAO?Thanks a lot its very urgent.Regards Pete

#Teijin Seiki by Ajay Ghanwat on 2010-03-28 05:00

We have Mitsubushi HMC500 with VIGOSERVO ARS30 drive for ATC magazine.Plz support for the alarm diagnosis.

#Teijin Seiki by Cody Stamper on 2010-04-01 15:03

I know this post is old, but I\'m looking for the AR60 manual also. The servo set with no power for quite some time, batteries went dead, and now all of the positions are off. The only manuals I have are in Japanese.

#Teijin Seiki by ROLANDO on 2010-08-09 12:16

HI,Please quote forTeijin Seiki Servo Motor PN UPH 7S31-B10 1pcRegards,

#Teijin Seiki by Victor Gonzalez on 2010-09-23 17:42

we have at least 50 OKK machines & these machine used in motor\'s magazine a: VIGOSERVO ARS Model: ARS60-15 Power: 1.5 Kw AC input 200-300V 50/60 hz Out Put 10.6A max 31.8 A Teijin Seiki Co. Ltd. Serial: 800023

#Teijin Seiki by Victor Gonzalez on 2010-09-23 17:46

We have at least 50 OKK machines working with a Vigo servo ARS for motor magazine control. We have at least 3 of them damaged but now we have a machine down because we dont have any more spare.Could you possible to help me with a quotation and your best delivery time for a new one & also for rep...
Show More

#Teijin Seiki by Victor Gonzalez on 2010-09-23 17:53

We have at least 50 OKK cnc machine working with VIGOSERVO ARS as a motor magazine control, and now we have 3 damaged & we have a machine down because we dont have any more spares: Could you possible to send me a quotation and your best delivery time for a new one? Could you possible to help me ...
Show More

#Teijin Seiki by MANUEL PARTIDA on 2010-11-12 00:30

LOOKING UNIT MODEL VIGOSERVO ARS60-15 AND IF YOU HAVE A MANUAL FOR THIS UNIT PLEASE

#Teijin Seiki by Jay Carr on 2010-12-09 13:54

We have this code on our ARS15 :\"E-109\" and it is not listed in our manual.The controller to the machine Shizouka sv-4020 has this alarm message: \"no. 2063ATC servo alarmMagazine servo alarm\"I would like to know the problem and how i could trouble shoot it with out any extend...
Show More

#Teijin Seiki by Guersemdriree on 2011-08-05 13:37

lo que yo queria, gracias

#Teijin Seiki by manoj sharma on 2011-08-18 17:22

PLEASE HELP ME ALARM DRIVE E 101

#Teijin Seiki by KETAN GAJJAR on 2011-08-24 16:16

Dear Sir,We are lloking for above servo mannual.Pl. send me the same if you have.True regards,Ketan Gajjar

#Teijin Seiki by narinder singh on 2011-08-30 14:49

Dear Sir/Madam We Have machine teijin seiki Which has drive named ARS-30 vigo servo is getting problem of Alarm E - 101 . Kindly Give us the Solution of that alarm as well as send us the manuals.

#Teijin Seiki by Audre Chay on 2011-09-23 10:44

Dear, i am not sure whether the servo unit is faulty or not.the digital no. only show no. 5please consult.thanks.

#Teijin Seiki by Nguyen dang van on 2011-11-24 08:41

My company purchased Machine Centre style: Okuma, serial no: milac-852v. now it trouble ATC(auto tool charge), driver ( Vigo servo ARS30) loss parameter cause drop battery. Can you please send me manual for vigo servo ARS30-A.Nguyen Dang VanMold & Die Deparment ManagerVIETNAM STANLEY ELECTRIC CO...
Show More

#Teijin Seiki by hiteshrana on 2012-04-09 09:28

yes i need it manual for my m/c .please sned this on my mail.My cell no.09540638378

#Teijin Seiki by Steffan on 2012-05-10 23:03

Hi NguyenDid you ever find a manual for the ARS30? We are in the same situation and need a manual to get our machine up running again.Any responce would be much appreciated.Thank you.RegardsSteffan

#Teijin Seiki by Heah Tai San on 2012-11-30 02:39

Dear Sir/Madam, We Best Solution Machine Tools Dealing In Metal Working Machinery And Service In Malaysia, We Face A Problem In Repairing The Magazine For Okuma&Howa Millac 511V. The Magazine Can Not Stop, Kindly Can You Tell Us How To Solve This Problem, What Is The Parameter No. For Magazine O...
Show More

#Teijin Seiki by Gianni Campanello on 2013-04-10 09:44

Good morning,My name is Gianni Campanellol,I have a vigoservo, with display E14.I downloaded manuals from the internet, but can not find information E14.I ask for help for problem solution.1000 Thank you.

#Teijin Seiki by LEEGIN on 2013-06-18 15:43

alarm details vigo servo ARS6O E14 E3 E4 Pls details for alarm and solve it

#Teijin Seiki by leegin on 2013-06-18 15:51

i need it manual for vigo servo ars60 .please sned this on my mail

#Teijin Seiki by paul myers on 2013-10-08 00:00

Subject Teijin Seiki ARS15-06 Vigoservo Repair InquiryDear Repair Shop,I am reaching out on behalf of a client who is experiencing issues with their Teijin Seiki ARS15-06 Vigoservo (part number ARS15-06). The client has reported a problem with the functioning of the servo system and is in need of re...
Show More

#Teijin Seiki by Khoa Tran on 2013-11-22 15:51

Hello,I have Vigo Servo ARS15-06 now It alarm E-109 I have not the Manual Please help me for alarm E-109.Thank you very much.Khoa Tran.

#Teijin Seiki by John Robinson on 2015-10-01 17:31

Hello, we are having an issue with our vigo servo. We are getting an E101 alarm. We have found out that this alarm means a IPM alarm but we are unsure as to what that actually means.You can reach me by phone or email listed above.Thanks, John.

#Teijin Seiki by Orlando Jones on 2016-06-21 19:14

I am trying to get information about an E-109 code for a Vigoservo ARS30

#Teijin Seiki by SUNG MO KANG on 2016-08-30 06:42

Hi,We have some technical problem about VIGO SERVO ARS60-15. I have an alarm \"E-3\", when tools are changing. If you have any solutions or manual book, please help me to solve this problem. In addition, if you have manual book or a file of the manual, i might be able to buy it.Thank you f...
Show More

#Teijin Seiki by ARUN UPANAL on 2016-12-16 14:36

list of alarm 1. E101 & E105 2. E2

#Teijin Seiki by Conrado Estrada on 2017-04-03 23:12

Anyone can help me on the error code "E-116"?

#Teijin Seiki by Tin Sarmiento on 2017-05-24 09:27

Dear Sir/Ma'am,Good day ! I would like to request a quotation for the item below. PLEASE QUOTE:1pc. SERVO MOTORPart no. / Model no. / Stock no. : UP H7S-11-BIOBrand: TEIJIN SEIKI/NabtescoFor Equip/ Tool: TSOP Deflash/Dambar Progressive Tool HANMIFor Equipment serial no. : TSP-2582-2002-- Notes:*Weig...
Show More

#Teijin Seiki by li yanming yanming on 2017-08-10 03:15

Hello.Excuse me?We are an electrical and mechanical engineering company in china.We need to buy the following products:We can accept: refurbishment, alternative.V160SERVD ARS30-10Quantity; 1Would you please make us a favorable offer?And provide accurate information:Price, weight, delivery date, info...
Show More

#Teijin Seiki by JR TECHNO PRODUCTS on 2017-10-25 07:13

WE HAVE PURCHASED OKUMA & HOWA MILLAC 550H FITTED WITH 60 TOOLS ATC RUN BY VIGO SERVO ARS60.NOW WE HAVE PROBLEM TO OPERATE THE ATC. PLS SEND OPERATION/MAINTENANCE MANUALTHANKS

#Teijin Seiki by Craftsman automation on 2018-08-18 00:00

Looking for assistance with a Teijin Seiki ARN15-A VIGOSERVO unit that is not responding to commands. Need immediate repair support.

#Teijin Seiki by bill whitacre on 2019-01-24 00:00

Teijin Seiki UP15C121-010 Motor not responding when powered on. Need immediate repair assistance to get production back on track.

#Teijin Seiki by Rob Terry on 2019-06-28 15:12

Looking for a Vigoservo ASR30 Manual.Do you have on available for download?Please advise.Thanks

#Teijin Seiki by Tomislav on 2020-09-08 07:39

Can you send me the parameters for vigoservo ARS 15-06.Thanks for your help!Tomislav

#Teijin Seiki by Vishal Sojitra on 2020-10-17 02:52

Dear Sir/Ma'am,I have a kitamura mycenter 3xi machine I lost all parameter of vigo servo ARS-15-06.Can you please send me a parameter?It will helpful to me.Please do needful.

#Teijin Seiki by Sankar kannan on 2022-07-05 03:25

25 drive alaram number

#Teijin Seiki Co by Scottalume on 2023-05-22 04:23

I am experiencing a malfunction with my Teijin Seiki Co. ARS1506 servo control drive unit. The unit is failing to respond to inputs and is not executing the desired commands correctly. This issue is causing disruptions in our production process, leading to delays and potential losses. Based on initi...
Show More

#Teijin Seiki by Tom on 2024-03-25 19:39

Looking for a Vigoservo ASR30 Manual.

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.