Velconic for Service call 1-336-969-0110 at Industrial Electronics Repair

Velconic Service & Repair Forum

I have a machine that the drive, is in need of repair. The drive in need of repair is VLASE-050P-026. I have another machine with a drive controlling the same motor model no. this is a VLASE-050P-107. What is the difference between these two drives? Can I swap them out for an immediate resolution on the one machine if the drive parameters are the same? What is approx. turn around time for repair?Thanks,Mike

— Posted by Mike Bowman on 2012-07-11

Reply🗨️Ask a New Question Below❓

If you need your Velconic unit tested or repaired,
give us a call at 1-336-969-0110.
We offer fair estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 89 Comments

#Velconic by Ms.Buse Zehir on 2005-06-09 14:29

Dear Sirs,I'm looking for a cnc Servo Driver control card according to following specificationsVELCONÝƒVLAST-070P3V-XX3 phase 200-240 VAC 50-60 HZThe card's photos are in the attached filesLooking forward to see your reply as quick as possibleBest regards

#Velconic by Ben Hur Aguinaldo Jr on 2005-09-14 06:06

Hi,Can you assist us in this inquiry? -velconic servo motor VLBST-37030-AB -velconic servo controller VLNBL-070P30-AC1 Regards,BEN HUR AGUINALDO JR.RNM DYNAMICS (PHILS.) INC.Tel. : (632) 842 7545Fax : (632) 842 7558email : ben.a@rnmdynamics.com

#Velconic by Ben Hur Aguinaldo Jr. on 2006-01-06 10:12

Hi,Kindly provide pricing and availability for the item below.We badly need this please give best price and leadtime.Servo Driver:Velconic BS Servo Controller T SeriesVLNBT-050P3V-AX1Regards,Ben Hur Aguinaldo Jr.RNM DYNAMICS PHILS., INC.Tel.: +632 8427545Fax: +632 8427558email: ben.a@rnmdynamics.com

#Velconic by Valeria Sharova on 2006-02-09 15:33

Dear Sirs,We are looking for a servo-motor VELCONIC VLTT-050 PR of TOEL ELECTRIC Co production with an additional built-in plata B0 009202.We also need a servo-motor VLBS-A22012 of a production of the same company.All for use in our Bobst SP 900 machine.Hope for your quick reply.Thank you very much ...
Show More

#Velconic by NGUYEN HUY DINH on 2006-05-05 06:43

58/5A Huynh Tan Phat street, district 7, Ho Chi Minh city, Viet Nam Friday, 5 May 2006Dear Sirs,We have a servo amplifier VELCONIC VLTT-010SR of TOEI ELECTRIC Co production, but we don\'t how to use it. So we want to have a user\'s guide for it. Hope for your quick reply.Thank you very much.With bes...
Show More

#Velconic by mr. shamim alam on 2006-08-12 09:18

Dear Sir, We have Iwasaki-TR-25 6clr, UV waterless offset label press. For that machine the Main Motor is as follows: Velconic BS - Servo MotorVLBSE - 55040Sr. No. : 55400345.5 KW4000- RPMTOEI Electric Co. Japan-35Kg for above motor following is the drive Velconic Software BS Servo AMPVLASE - 150PSo...
Show More

#Velconic by emma on 2007-02-15 11:30

good day to you have you got any agents in south africa for velconic electric cards this is quite urgent if you can get back to me please

#Velconic by Anang Suherman on 2007-04-23 14:46

dear shamim,I think that is some problem with hardware ( IPM Modul ) . Try to change itsand check all parameter before you run again . happy nice day best regards,Anang suhermanIndustrial Machine Technical Engineering

#Velconic by Anang Suherman on 2007-04-23 14:48

dear shamim,I think that is some problem with hardware ( IPM Modul ) . Try to change itsand check all parameter before you run again . happy nice day best regards,Anang suhermanIndustrial Machine Technical Engineering

#Velconic by VIJAY PATEL on 2007-06-24 10:37

WE ARE FACING PROBLEM IN VELCONIC SERVO AMPLIFIER REGARDING HIGH FAILURE OF TRANSISTOR MODUEL 6DI75A050. FOLLOWING SPECIFICATION OF SERVO AMPLIFIER:-VLASE-050P-166SOURCE - 3P200/220VAC 50/60HZMOTOR- VLBST-24030.

#Velconic by vijay patel on 2007-06-24 10:55

do u have any agent or repair centre in India. if it is near by india please specified and reply.regards,vijay

#Velconic by somsak kongnuket on 2007-07-12 02:28

I want to know about supplier velconic servo model VLASE-505P-142 in thailand thank.

#Velconic by Mark on 2007-07-28 01:56

Can anyone guide me to a source for an older series amp RAD330..Thanks

#Velconic by Jay Blackmon on 2007-08-04 17:57

i have a servo alarm the cursor beside the r o. is blinking.i have no manual in english

#Velconic by Bill Sawyer on 2007-08-30 20:34

I am getting fault message on master drive AL902. I have no way of knowing what this is with no documentation. I put another slave drive drive in and error remained. Any suggestions and where can we obtain documentation on drives with listing of error codes. Thanks.Bill Sawyer

#Velconic by Throngpon Rathbumpoeng on 2007-09-01 08:56

I want to manual for VLTT-010P andI want to know about supplier velconic in thailand thank.

#Velconic by VERG on 2007-10-03 03:55

ITS VERY GOOD SERVO AMPLIFIER BUT NOW GIVING MESSAGE OF COMUNNICATION ERROR.

#Velconic by magdyseliman on 2007-11-18 07:10

ive vlase-050p servo amp vlbse-22012 motor type ihave error 18 ineed to repaire servo amp or ineed new one

#Velconic by V.VIJAYA KUMAR on 2008-01-11 14:07

Dear sir, We have a servo amplifier VELCONIC VLTT- 80 PIN of TOEI ELECTRIC CO PRODUCTION, We are facing problem in servo amplifier which is showing fault indication VAS. Servo motor is not rotating due to this fault. Kindly, give trouble shooting procedure to resolve this problem at the earliest.I h...
Show More

#Velconic by THANGLE on 2008-01-22 07:05

motor Model : VLBS-075-120-S , Q\'ty 2pc , maker : VELCONICThanks Thangle MB: 0989.881549tell: 84-08-4461459Fax : 84-08-4460078

#Velconic by HUYNH NGUYEN DUY PHUC on 2008-03-02 14:59

Dear sir,I have a servo amplifier VELCONIC VLPST-012P2L-SX and a motor type VLBST-Z02030S-BGU of TOEI ELECTRIC CO., Ltd., but I don\'t know how to use it because there are no userguide of it. It\'s made in Japan in 2004 and I took it from my teacher, without any userguide. Kindly, I need you send me...
Show More

#Velconic by martatan on 2008-05-23 01:17

I need a velconic manual type VLNBE-020P-FP.How can I Do?

#Velconic by martatan on 2008-05-29 04:26

What\'s alarm nember \"44\" in velconic servo type \"VLNBE-020P\"?

#Velconic by Cheng on 2008-06-07 07:40

HOW REPAIR A FAULT. It is \" A.L -04\"

#Velconic by Emillie Getalado on 2008-07-09 05:50

To whom it may concern, We are Kuri Technologies Company,a trading for spareparts and supplies. May request for a quotation for VELCONIC VLPST-012P2V-XB We urgent need this item, your immediate feedback is highly appreciated. Thank you.Sincerely,Emillie GetaladoSalesKURI Technologies Company

#Velconic by romano igot on 2008-07-21 08:48

Hi sir/ maam,

#Velconic by romano igot on 2008-07-21 08:56

Hi sir/ maam, We are one of the user\'s of your product. The driver of servo motor. Our company is Autoveyor Phil\'s. Corporation. I, as a representive would like to ask a favor from your good office to help me on how to find or search a manual for servo driver the VLPST-012P2V-XBThank you and more ...
Show More

#Velconic by DANE NEUTZ on 2008-07-24 17:58

IM LOOKING FOR SOMEONE IN THE U.S. TO REPAIR DRIVES AND MOTORS.WE ARE A U.S. AGENT FOR A LINE OF WIRE FORMING MACHINES THAT USE VELCONICS UNITS.

#Velconic by FEG Components (Ipoh) Sdn Bhd on 2008-09-11 08:31

Can you give me Velconic agent at Malaysia?Thank youBest RegardsChin

#Velconic by Aysel Uyar on 2008-09-22 06:16

Dear, I urgently need the instruction manual of the driver Velconic VLTT-020P. Could you supply me some technical information about it? I have some problems in running the driver.Thanks in advance for your attention.

#Velconic by luis Gregorio Almendarez on 2008-10-08 18:11

Need a product and instruction manual of the Velconic VLASE-020PZsource: 3P 200/220VACMotor type: 24L26209813Have one drive with intemitenet failures. Need to review and maybe to replace

#Velconic by khemananda on 2008-10-09 08:29

we need parameter type velconic vlase-020p

#Velconic by khemananda on 2008-10-09 08:35

we need parameter vlase 020p

#Velconic by khemananda on 2008-10-09 13:25

we need parameter servo amp velconic vlase 020p

#Velconic by Gerardo Pinales on 2008-10-15 14:30

I´m having some trouble with a old velconic drive VLASE-020PZ, but I can´t find any informacion about it, I´ll appreciate your advice or support to get or send me this manual.best regards

#Velconic by huynhphuc on 2008-10-24 07:11

I need the datasheet of Toei VLPST servodriver. Can you tell me the way to using the servo. Best regardHuynhPhuc.

#Velconic by Martin Gauthier on 2008-12-08 16:41

We have 3 drive VLASE-010p-058 and We are lokking for the programming and hardware manuals... Do you know were I can find them?

#Velconic by DHIRENDRA DUBE on 2008-12-15 10:54

Dear Sir/MadomWe arecfacing problem in VELCONIC SERVO AMPLIFIER Type VLPSV-070P#-AB,if possible pl provide us the manual of the same

#Velconic by joel p. adorable on 2009-01-22 23:09

How to reset the alarm 10 which is trigger to the monitor, and what will do of this.

#Velconic by gaojinhua on 2009-02-14 08:16

Velconic VLPST-012P2V-XB Manual

#Velconic by soonloi on 2009-03-21 06:49

I having Error Code on my servo drive(VLASE 150P).E 06And I found no button or keypad to reset, some external control panel are needed? thanks

#Velconic by chandra waju on 2009-05-19 13:53

Dear Sir,I need some informations about Velconic Toei Electric VLBST-04030-G and Velconic Toei Electric VLASE-01087-187.I was search this device in the internet, but i have not find information about it. Can you help me to give some information about it atleast the specification? Please....Thank you...
Show More

#Velconic by SMAILL TABRIZI on 2009-06-09 09:29

What\'s alarm nember \"44\" in velconic servo type \"VLNBE-020P\"?

#Velconic by binh on 2009-06-14 16:56

manual pdf file servo driver model toei VLASE

#Velconic by agustinus on 2009-07-03 08:54

I want to manual for VLTT-050P andI want to know about supplier velconic in Indonesia thank.

#Velconic by Virachan Chaichana on 2009-08-31 08:40

Dear Sir,I need you to quote a full set of VLTT-050P motor drive. I need it for replace the old one I have, but the drive was broken and very hard to investigate and replace only a peace of IC or condenser, I need a full set of this control unit.Please quote base on DHL shipping to Bangkok, Thailand...
Show More

#Velconic by Irma Rakhmawati on 2009-09-08 07:40

Dear Sir,I would like to have information about Driver Velconic type VLTT-010 PR-2I would like to buy it.So please give me information how to buy this item.Kindly please advice.Thank you,Irma

#Velconic by EUGENE GETZ on 2009-09-23 21:55

WE ARE PROGRAMING THE ABOVE AMPLIFIER USING THE PRG-90 PROGRAMMER. WE WERE ABLE TO PUT IN ALL OF THE PARAMETERS BUT WE ARE UNABLE TO GET OUT OF THE EDIT COMMAND. THE DRIVE WILL NOT WORK BECAUSE WE ARE STILL IN EDIT. THE DRIVE IS BRAND NEW AND HAS THE SAME PARAMETERS AS OUR OTHER DRIVE. CAN YOU TELL ...
Show More

#Velconic by Jaime Lopez on 2009-09-28 19:07

Hi, I have a Velconic servo motor that I need to repair.Model VLBST-04030Please, can you send me Information about the procedure to repair this motor?I will appreciate to much your helpRegards

#Velconic by mustafa on 2009-09-29 08:24

Hi me and alarm codes sema velconic vltt 020pn electricity as soon as possible if you send description should be good ..

#Velconic by pandaya on 2009-10-15 07:39

Dear SirWe have Servo Motor Velconic Type VLASE-020P-051 Please give me information Specification and How to Program that servo motor.Thanks about your attention.Best regard Pandaya

#Velconic by pandaya on 2009-10-15 07:45

Dear SirWe have Servo Motor driver Velconic Type VLASE-020P-051 Please give me information Specification and How to Program that servo motor.Thanks about your attention.Best regard Pandaya

#Velconic by madhukar s.shinde on 2009-11-09 12:40

sr.no: 0662496 of Toyita Air Jet loom.

#Velconic by AKASAKA ELECTRONICS LTD on 2010-01-28 10:12

Alarm message AL1 is displayed on the drive as soon as the motor drive command is given.

#Velconic by glenn on 2010-02-09 06:39

I have a few units of velconic drivers such as VLNDT-100P3V-XXI are faulty, can i know who do i need to contact for advice and repairs.

#Velconic by Damitha Dahanayake on 2010-06-16 03:45

Dear Sir,We are using VLNBE-050P-FP and BS Servo motor VLBSE 22012 and now VLNBE-050P-FP is got aalarm 06 or 0b Please instruct us to what should we have to do and please send me user and technical English mauals.Thanks your kind corperation.

#Velconic by RJ SINDAC on 2010-07-18 05:51

Hello Sir/Madam,Good Day!Currently, we are facing problem one of our machine,Servo Motor Alarm, Alarm \"32\" on Servo driver with SN. VLNBE-050P-APcan you give us some information on the said driver for easy troubleshooting. ThanksRegards,Rj Sindac

#Velconic by Jonathan Albert Ocampo on 2010-09-16 00:17

Dear Sir / Ma’am,Kindly send a formal quotation for the products.Brand: VELCONIC1.Servo Motor, VLBST-Z02030 200W, 1 QTY2.Servo Motor, VLBST-Z01030 100W, 1 QTY3.Servo Motor, VLBST-Z04030S-BGU 1/15, 1 QTYDo you have a distributor here in Philippines?Thank you.Best regards,Jonathan Albert OcampoPurchas...
Show More

#Velconic by Lee siong foo on 2010-11-24 02:08

The servomotor brand velconic:vlase-020b,When push start button the motorhave no function.TqLee

#Velconic by andi kurnianto on 2011-01-24 13:11

dear sir,my name andi kurnianto, i want information with velconic vlase-150p-189,because my problem with it,my be you have manual book or information wiring in block product,iam very much with your attention,please i want help you ..urgent.regardandi kurnianto

#Velconic by Rajkumar Sharma on 2011-04-15 05:36

Please send quotation of velconic servo ampliier.Model VLPSV-070P3-ABPlease send quotation of data cable and software loader.Thanks with regards,Rajkumar Sharma,Abhitex International,Pasina Kalan,GT Road,Panipat - 132103HaryanaPh 09896539937

#Velconic by Adison Kh. on 2011-05-03 04:02

I would like to request for help from you due to I found servo motor model VLBST-3703 were malfunction that I could not find and order the new one to replace. Can you help me to repair or them or not? If you can please send the detail to me.Thanks and Best regards,Adison Khangrang

#Velconic by Oleg on 2011-06-30 20:47

Sirs,I need to repair VLNBT-100P3V-EXX.It is SERVO module of CT Toshiba Aquillion 4 slice.I see message \"AL 902\".

#Velconic by Ganda Kusumah on 2011-07-26 07:45

Dear Sirs,We are looking for a servo-motor VELCONIC VLPSV-035P3-RB TOEI ELECTRIC Co for printing machine.Hope for your quick reply.Thank you very much in advance.Best regards,Ganda KusumahPT. Dawee Electronic Indonesia

#Velconic by athar javid on 2011-08-20 11:16

Dear sirplease send me vltt servo amplifire manual best regardsAthar

#Velconic by RAMA on 2011-09-05 11:37

SERVO ROTATION PROBLEMSERVO MOTOR NOT COMPLITE THE FULL ROTATION

#Velconic by khalid baig on 2011-12-17 07:05

dear sir, i need manual of velconic vltt-050p bs-sevo amp.please i need it urgent help me out.thanks.khalid baig

#Velconic by Krishan Kumar on 2012-02-08 14:22

I need Operating Manual of Velconic Servo Drive VLAST 070P3

#Velconic by Shahzada Waqas on 2012-03-22 11:25

please reply me if we can get a manuall for this servo motorVLBS A22012Sn.2211090model 1989

#Velconic by YVV SN RAJU on 2012-03-24 08:23

currently servo problemservo details VLASV-012P2-HX 200V-ASSY 0000PRESENT AVAILABLE PLACE & SUPPLAR NAME &ADDRES

#Velconic by jaisingh on 2012-06-02 05:23

i am working in textile company & i want velconic drvie mannual for guidence only.my company use toyata jat 170 Loom in weaving section.so plz helpfuli am wating for ur promt reply.

#Velconic by Luis Carlos Hernandez on 2012-07-07 18:30

Need to have this unit repaired, power supply does not have any output.

#Velconic by Mike Bowman on 2012-07-11 18:32

I have a machine that the drive, is in need of repair. The drive in need of repair is VLASE-050P-026. I have another machine with a drive controlling the same motor model no. this is a VLASE-050P-107. What is the difference between these two drives? Can I swap them out for an immediate resolution on...
Show More

#Velconic by Diogo on 2012-07-12 14:09

I have a problem need to change the motor speed by Vlase-050P, most do not know how to do it.I also need the manual Vlase-050P.thank youDiogo

#Velconic by NO SEUNG HYUN on 2012-09-10 02:24

VLASE-150P MANUAL

#Velconic by Chandresh on 2012-10-15 04:58

Dear sir; We have facing frequent problem in our VELCONIC-VLAST-015T Servo-amplifier with control boards in our toyota looms-710letoff motion unit. It\'s specification as under. specification=VELCONIC-VLAST-015T ASSY=5300 0.NO.J9202-20021-0E SOURCE=3P 200/220VAC 50/60HZ OUTPUT=17.0A(PEAK) SERNO.=4B0...
Show More

#Velconic by N BALASUBRAMANIAN on 2013-01-19 08:25

Kindly provide contact details of your distributor & service centers in India

#Velconic by santosh on 2013-03-24 09:44

very nice drive but drive manual give me

#Velconic by s. sunthar singh on 2013-04-22 09:45

Dear Sir,We have MPU and we face problem in it. Error shows 321. MPU details are ( DOA-32, DIA-32, MCA68-001, PSA-05Will you be able to repair the same and send it to us. If you have the new one, please let us know the price.tks

#Velconic by Kashup Senarathne on 2013-12-27 13:16

Dear Sir,We are using VLNBE-050P-FP and BS Servo motor VLBSE 22012 and now VLNBE-050P-FP is got alarm 16 or 0b Please instruct us to what should we have to do and please send me user and technical English mauals.

#Velconic by Kashup Senarathne on 2013-12-27 13:27

Dear Sir,We are using VLNBE-050P-FP and BS Servo motor VLBSE 22012 and now VLNBE-050P-FP is got alarm 16 or 0b Please instruct us to what should we have to do and please send me user and technical English mauals.

#Velconic by bodin on 2016-10-07 00:24

i need manual of vlase servo drive

#Velconic by LIM on 2016-11-18 06:27

I have Velconic VLASE-050P servo controller encounter the ALARM 5 issuePlease advise.Can send for repair?Thanks

#Velconic by Muhammad Abubakar on 2017-03-23 09:06

Respected sir,i have recently purchased the said driver. it is used and i need its manual to make it operate able. Please send the manual so that i can use the product. thanksSerial NO. is. T012P208451

#Velconic by Dalton on 2017-04-13 12:23

#Velconic by Dalton on 2017-04-13 12:28

Alarm 18 shows "POL"......"(MOTOR OVERLOAD INST)"What does this trace back to? I believe it is the quill motor driver, but the quill zeros freely, and doesn't trip the alarm until we try and run the machine.Any ideas where to start? Driver or board?

#Velconic by Andres Pulla Mendieta on 2020-02-10 17:12

Dear Sir please heló to salve the error AL 21, are you could share the manual for these Servo controller

#Velconic by HARMINDER SINGH SAINI on 2022-01-28 06:29

Dear SirWe have a servodriver VLASE 150-P which is not working properly. Please quote to repair it. How much is the shipping charge from India Oin Code 110039.

#Velconic by Koay on 2024-07-31 02:16

My VELCONIC VLNBE-050P-XP servo drive have error code 05.What is this error 05 means ??Tqvm !

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.