Westronics Service & Repair Forum

In order to comply with the Duke Energy internal Asbestos Policy, we are required to insure that no products or components containing asbestos are procured. We are contacting all Duke Suppliers of valves, pump, motors, and actuators to obtain a statement via e-mail or fax that their company does not supply asbestos containing components. This information can be e-mailed to sjbostia@duke-energy.com or faxed to (980) 373-9729. If you have questions or need clarification, please call Tasha at (704) 875-5868. Please send your response within two weeks. Thanks in advance for your cooperation.

—> Purchase or Repair: Ticket Image

— Posted by Tasha Chapman on 2006-09-14

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Westronics"

If you need your Westronics unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 134 Comments

#Westronics by Knud Oellgaard on 2012-02-18 14:17
The Westronics CS1778-1 11701 moisture recorder is not powering on.

—> Purchase or Repair:
#Westronics by Panchal on 2013-08-15 10:01
The Westronics SDI 300 SDI-0-130-010-00 is displaying Error Code 27, indicating a communication failure with the sensor. Please advise on troubleshooting steps or potential solutions. Thank you.

—> Purchase or Repair:
#Westronics by Bobby Nolan on 2013-06-11 21:43
Westronics Series 2600 2600-111-000-000-11 chart recorder not printing any charts despite power and all connections checked and verified.

—> Purchase or Repair:
#Westronics by Olejnik Leszek on 2012-01-01 04:39
Manual and documentation for PCB

—> Purchase or Repair:
#Westronics by ROB DYCK on 2012-09-21 15:47
The Westronics CS1778-1 11701 Moisture Recorder unit is not working.

—> Purchase or Repair:
#Westronics by Ene on 2005-12-28 00:12
We are experiencing consistent short-circuits on the Westronics DDR10 PA100056-01, halting our production line. Urgent attention and repair service are needed to resolve this issue

—> Purchase or Repair:
#Westronics by kulwnt on 2013-05-12 15:20
My Westronics SDI 300 SDI-0-130-010-00 Smart Digital Indicator is malfunctioning and needs repair. Seeking help from a professional technician experienced with industrial units. Thank you.

—> Purchase or Repair:
#Westronics by Jess.UncerseBreert on 2013-11-14 02:19
Device Westronics Series 2600 2600-111-000-000-11Issue Chart recorder not functioning, no display visible on screen. No response to power button. Possible power supply failure.Immediate attention required. Thank you.

—> Purchase or Repair:
#Westronics by Tasha Chapman on 2006-09-14 14:51
In order to comply with the Duke Energy internal Asbestos Policy, we are required to insure that no products or components containing asbestos are procured. We are contacting all Duke Suppliers of valves, pump, motors, and actuators to obtain a statement via e-mail or fax that their company does not…Purchase or Repair: Ticket Image...
Show More
#Westronics by Dunham on 2012-04-14 15:33
The Westronics CS1778-1 11701 Moisture Recorder is malfunctioning, causing a halt in our production line. Urgent repair and resolution are needed to minimize operational downtime.

—> Purchase or Repair:
#Westronics by mariolis georgios on 2010-02-11 13:14
Good day Sir/Mr(s)I would like to find the manual concerning the terminals of the model above but unfortunatelly i can\'t.I would appreciate if you could mail me this document.Thank you in advanceMariolis Georgios

—> Purchase or Repair:
#Westronics by Davidbax on 2012-07-31 15:37
Hello, I'm seeking information about the Westronics CS1778-1 11701 Moisture Recorder. Our team is looking for replacement or repair options for this older unit. Could you please confirm if this model is still supported or if parts are available for it? Thank you.

—> Purchase or Repair:
#Westronics by Sharon Casey on 2006-09-13 23:11
I am a business customer with a Westronics SM100 Servo Drive unit that is not functioning properly. The unit is failing to respond to commands, resulting in erratic movements and inconsistent performance. Based on the initial assessment, the repair cost is estimated to exceed $1000 due to the comple…Purchase or Repair: Ticket Image...
Show More
#Westronics by George Losey on 2025-06-09 19:32
I'm experiencing an issue with the Westronics Series 2100 chart recorder where something seems to have stopped working. I'm not entirely sure what the model does, but I'm hoping you can assist me in diagnosing and resolving the problem. Thank you for your help.

—> Purchase or Repair:
#Westronics by Aydýn Süngü on 2013-12-24 12:30
Could you please confirm if the Westronics 345#14588 chart recorder is still supported or if replacement parts are available for repair? Thank you.

—> Purchase or Repair:
#Westronics by David Wright on 2005-05-09 03:42
Experiencing issues with my Westronics DDR-10 PA100056-01 industrial unit. It's malfunctioning and urgently needs repairs. Seeking a qualified technician to fix it quickly.

—> Purchase or Repair:
#Westronics by Riis on 2013-06-19 10:59
Westronics SDI 300 SDI-0-130-010-00 displaying error message "CAL ERR."

—> Purchase or Repair:
#Westronics by steve kreie on 2012-07-20 03:04
Hello, I'm following up on the Westronics CS1778-1 11701 Moisture Recorder as requested. Can this be repaired or replaced? Just looking to check this off my to-do list.

—> Purchase or Repair:
#Westronics by Curt Nunier on 2013-08-16 12:32
The Westronics SDI 300 SDI-0-130-010-00 unit at the shop is not working.

—> Purchase or Repair:
#Westronics by Richard Zelm on 2015-06-26 17:04
Can you please tell me what the measurement voltage is that the SBAG Ground Monitor uses to monitor the insulation? Is it 24 VDC? I can\'t find anything in their specs that tells you what the output voltage is that monitors the insulation. Thanks!

—> Purchase or Repair:
#Westronics by Ghanwat on 2012-01-29 18:44
I'm experiencing some trouble with the Westronics CS1778-1 11701 Moisture Recorder. It seems like something has stopped working, but I'm not exactly sure what the issue is. Can you please help me diagnose and resolve the problem?

—> Purchase or Repair:
#Westronics by larry c. naffziger on 2013-07-09 05:32
I have a Westronics SDI 300 SDI-0-130-010-00 Smart Digital Indicator that is no longer displaying any information. Looking for repairs ASAP.

—> Purchase or Repair:
#Westronics by Russ Vatalaro on 2013-04-27 00:22
Could you please confirm if the Westronics Series 2600 2600-111-000-000-11 chart recorder is still supported, and if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#Westronics by versatube on 2012-07-27 12:19
The Westronics CS1778-1 11701 Moisture Recorder malfunctioned at 0245 AM today, causing an unexpected downtime. Need a resolution ASAP before the next shift starts. Thank you for your

—> Purchase or Repair:
#Westronics by Gayland Testerman on 2005-12-30 02:51
The Westronics DDR10 PA100056-01 is causing frequent line stoppages due to a malfunctioning heating element. Immediate repair is needed to avoid production delays.

—> Purchase or Repair:
#Westronics by Larry Long on 2005-12-20 22:47
We are experiencing frequent stoppages on the Westronics DDR-10 PA100056-01, affecting production output. Immediate attention and repair service are urgently needed to get the line running smoothly again.

—> Purchase or Repair:
#Westronics by Pickenpaugh on 2013-05-25 04:24
Can the Westronics SDI 300 SDI-0-130-010-00 Smart Digital Indicator be repaired or replaced? I'm looking to address this task on my to-do list. Thank you!

—> Purchase or Repair:
#Westronics by J.Y. HENRY on 2024-11-08 00:00
Repair Inquiry for Westronics 3000 PrinterHello,I am reaching out on behalf of our client with a Westronics 3000 Printer (part number not available) that is experiencing some issues. The printer is not functioning properly and is in need of repair. Could you please provide information on the repair …Purchase or Repair: Ticket Image...
Show More
#Westronics by Strohmenger on 2013-06-21 07:46
The Westronics SDI 300 SDI-0-130-010-00 is showing error code 005. The display is blank and not responding to any input. Please advise on troubleshooting steps.

—> Purchase or Repair:
#Westronics by VINEETH RAJ on 2013-07-26 23:32
Could you please confirm if the Westronics 345#14588 chart recorder is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:
#Westronics by Joe Sayre on 2007-05-29 22:23
We received new printed circuits P/N CB100161-02 for a Westronics DDR10 Recorder. The new circuits are stamped with a Rev. H. the previous Circuits were stamped with Rev.D.I need help what is the difference in design change between Rev. D and Rev.H. Are there drawings available for both board revisi…Purchase or Repair: Ticket Image...
Show More
#Westronics by william l jennings on 2013-10-02 18:55
The Westronics Series 2600 2600-111-000-000-11 chart recorder is not functioning properly. The display is showing Error Code E2 consistently. Please advise on the next steps to troubleshoot and resolve this issue. Thank you.

—> Purchase or Repair:
#Westronics by Gimi on 2012-05-24 02:56
I'm experiencing difficulties with the Westronics CS1778-1 11701 Moisture Recorder - it seems to have stopped working properly. I'm not sure of the exact issue, but I would appreciate some assistance in resolving this problem. Thank you for your help with this.

—> Purchase or Repair:
#Westronics by mike gartside on 2013-04-20 18:05
Can this Westronics Series 2600 2600-111-000-000-11 chart recorder be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Westronics by DANIEL ZIJLMANS on 2025-05-28 08:29
Machine displaying "Error Code 101."

—> Purchase or Repair:
#Westronics by Geir Mordal on 2012-08-22 05:03
Good morning Madames / SirsWe do have a request for following:Ground Resistance monitor.1 pc. SBAG-202 External meter FS 1 rnACan you provide us with quote / delivery time of this.Thanks in advance.Best regardsGeir Mordal

—> Purchase or Repair:
#Westronics by luis de la garza on 2013-08-10 21:35
issue with Westronics SDI 300 SDI-0-130-010-00, Smart Digital Indicator. Board or drive failure, need to investigate ASAP. Carry on.

—> Purchase or Repair:
#Westronics by fatih bahat on 2012-01-19 12:47
The Westronics CS1778-1 11701 Moisture Recorder is displaying an error message and is not recording moisture levels accurately.

—> Purchase or Repair:
#Westronics by audrey on 2013-08-14 19:32
Hi there, I'm interested in purchasing a Westronics Series 2600 2600-111-000-000-11 Chart Recorder. Could you please provide me with information on pricing and availability? I'm hoping to source one quickly. Thank you!

—> Purchase or Repair:
#Westronics by stuart Rudge on 2009-06-26 12:28
Hello sales, are Westronics still in business? I have searched the internet but coming up with nothing apart from a few sites. I am looking for a Grounding resistance monitor type: SBDG 241.I require price & delivery for 1 piece to Southampton, UK.Regards Stuart Rudge

—> Purchase or Repair:
#Westronics by MALIK on 2012-02-12 10:54
the Westronics CS1778-1 11701 Moisture Recorder went down mid-shift. Please follow up on this during the day. Thanks!

—> Purchase or Repair:
#Westronics by kerry malpass on 2012-08-04 13:24
just a heads up that the moisture recorder Westronics CS1778-1 11701 has a failed drive or board. We'll need to address this issue ASAP to avoid any disruptions.

—> Purchase or Repair:
#Westronics by jonas hofer on 2019-04-24 15:01
We've got a Westronics CB100356-02C CHART DRIVE BD down. Unclear on the malfunction details, will investigate further ASAP.

—> Purchase or Repair:
#Westronics by eyuphan on 2012-11-18 00:08
Please provide me with more details about your Westronics CS1778-1 11701 Moisture Recorder. Is this product still supported, and are replacement parts available for it? Thank you.

—> Purchase or Repair:
#Westronics by Dmitry Gavrilenko on 2014-03-02 08:14
Good DayPlease give me a User\'s Manual for the above mentioned line falt detector. I have to modify the existing circuitry in my switchboard to make it fail-to-safe. This unit has been retrofitted and I cannot see any data onboard.thanks in advance

—> Purchase or Repair:
#Westronics by Mark Choi on 2012-08-06 11:24
The Westronics CS1778-1 11701 Moisture Recorder unit is not working and needs attention.

—> Purchase or Repair:
#Westronics by Carlos Melo on 2008-10-26 11:08
The power supply on Westronics 3000 PA100056-03 just failed. Need immediate attention to get it back up and running.

—> Purchase or Repair:
#Westronics by Khelfhoum on 2008-06-06 12:31
I'm experiencing some issues with the power supply of the Westronics 3000 PA100056-03. It seems like something has stopped working as expected. I'm not entirely sure what the problem is, but your help would be greatly appreciated.

—> Purchase or Repair:
#Westronics by Alan Levin on 2008-08-25 17:18
The Westronics 3000 PA100056-03 unit is not functioning properly and the maintenance team needs assistance.

—> Purchase or Repair:
#Westronics by Asheen Inderpal on 2011-02-16 11:42
Good day,I have an enquiry to quote for the following items:1)GROUNDING RESISTANCE MONITOR(INSULATON),MANUFACTURER:WESTRONICS/SEOBU ELECTRONICS- 102,AC110V60HZ,5UA. QNTY:12)GROUNDING RESISTANCE MONITOR :CO-SBG-241D,DC19-30V.0.001-0.2MOM ALARM.QNTY-1,MADED,WESTRONICS./SEOBU ELECTRONICS3)GROUP ANNUNCI…Purchase or Repair: Ticket Image...
Show More

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.