Westronics for Service call 1-336-969-0110 at Industrial Electronics Repair

Westronics Service & Repair Forum

The Westronics DDR10 PA100056-01 unit is not powering on, causing the production line to come to a halt. This issue needs immediate attention to avoid further downtime and productivity loss. Please prioritize this repair urgently.

—> Purchase or Repair:

— Posted by Benedicto on 2005-12-27

Reply🗨️Ask a New Question Below❓

Recent Comments Search: "Westronics"

Westronics → Westronics 3000 PA100056-03 ↗
Westronics → Westronics DDR10 PA100056-01 ↗
Westronics → ground resistance monitor sbag-102 ↗
Westronics → Westronics CS1778-1 11701 ↗
Westronics → Westronics Parts???? ↗
Westronics → Westronics DDR10 Recorder Printed Circuit ↗
Westronics → Westronics Urgent repairing request ↗
Westronics → Westronics Enquiry regarding westronics made power addepter ↗
Westronics → Westronics Westronics 3200 Temp.Scanner ↗
Westronics → Westronics Non-Asbestos Documentation ↗
Westronics → Westronics DDR-10 PA100056-01 ↗
Westronics → Digital Data Recorder Series 3200 ↗
Westronics → WESTRONICS EARTH GROUNDING RESISTANCE MONITOR ↗
Westronics → SBDG-241 ↗
Westronics → EARTH GROUNDING RESISTANCE MONITOR-SBAG-202 ↗
Westronics → Ship Owner Superintendente ↗
Westronics → Westronics GetData ↗
Westronics → Westronics 3000 PA 1000 56-03 ↗
Westronics → Westronics Westrincs Ground resistance monitor ↗
Westronics → Price request ↗

If you need your Westronics unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 134 Comments

#Westronics by Tasha Chapman on 2006-09-14 14:51

In order to comply with the Duke Energy internal Asbestos Policy, we are required to insure that no products or components containing asbestos are procured. We are contacting all Duke Suppliers of valves, pump, motors, and actuators to obtain a statement via e-mail or fax that their company does not…Purchase or Repair:

#Westronics by Agedah Collins on 2013-07-01 04:47

Could you please provide repair information for Westronics SDI 300 SDI-0-130-010-00? It's a Smart Digital Indicator that stopped working. Need a replacement but having trouble finding one. Appreciate your quick response. Thank you.

—> Purchase or Repair:

#Westronics by jonas hofer on 2019-04-24 15:01

We've got a Westronics CB100356-02C CHART DRIVE BD down. Unclear on the malfunction details, will investigate further ASAP.

—> Purchase or Repair:

#Westronics by Westcott on 2013-12-13 11:52

The Westronics Series 2600 2600-111-000-000-11 chart recorder is currently down. Screen displays "Error Code E-23" when turned on. Urgent assistance needed to diagnose and fix the issue.

—> Purchase or Repair:

#Westronics by buscemi on 2012-08-30 16:31

The Westronics CS1778-1 11701 Moisture Recorder is displaying error code E02 and not responding to input commands. Please advise on troubleshooting steps or schedule a technician visit as soon as possible.

—> Purchase or Repair:

#Westronics by Qasim on 2013-08-07 00:32

Westronics 345#14588 chart recorder is not printing anything on the chart paper.

—> Purchase or Repair:

#Westronics by Kreming on 2007-12-19 08:16

We apologize for the lack of response regarding your Westronics 3000 PA 1000 56-03 power supply issue. Please provide an update on the progress on resolving this matter as soon as possible. Your

—> Purchase or Repair:

#Westronics by kerry malpass on 2012-08-04 13:24

just a heads up that the moisture recorder Westronics CS1778-1 11701 has a failed drive or board. We'll need to address this issue ASAP to avoid any disruptions.

—> Purchase or Repair:

#Westronics by Geir Mordal on 2012-08-22 05:03

Good morning Madames / SirsWe do have a request for following:Ground Resistance monitor.1 pc. SBAG-202 External meter FS 1 rnACan you provide us with quote / delivery time of this.Thanks in advance.Best regardsGeir Mordal

—> Purchase or Repair:

#Westronics by Russ Vatalaro on 2013-04-27 00:22

Could you please confirm if the Westronics Series 2600 2600-111-000-000-11 chart recorder is still supported, and if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:

#Westronics by Reccardi on 2013-07-17 20:44

Experiencing issues with Westronics SDI 300 SDI-0-130-010-00 Smart Digital Indicator - unit not displaying any output readings. Please advise on troubleshooting steps or possible solutions. Thank you.

—> Purchase or Repair:

#Westronics by Andzelika on 2013-06-21 15:58

Hey, the Westronics Series 2600 2600-111-000-000-11 is not functioning properly. Maintenance team needs to take a look at it.

—> Purchase or Repair:

#Westronics by Dmitry Gavrilenko on 2014-03-02 08:14

Good DayPlease give me a User\'s Manual for the above mentioned line falt detector. I have to modify the existing circuitry in my switchboard to make it fail-to-safe. This unit has been retrofitted and I cannot see any data onboard.thanks in advance

—> Purchase or Repair:

#Westronics by Francis J. Rodrigues on 2005-12-28 01:12

The Westronics DDR10 PA100056-01 is malfunctioning, causing a production line stoppage. Immediate repair is needed to resume operations.

—> Purchase or Repair:

#Westronics by pletcherxtq on 2013-04-20 11:05

The Westronics SDI 300 SDI-0-130-010-00 unit is not working.

—> Purchase or Repair:

#Westronics by luis de la garza on 2013-08-10 21:35

issue with Westronics SDI 300 SDI-0-130-010-00, Smart Digital Indicator. Board or drive failure, need to investigate ASAP. Carry on.

—> Purchase or Repair:

#Westronics by Demica Williams on 2012-05-11 00:03

the Westronics CS1778-1 11701 Moisture Recorder went down mid-shift. Please check it out and troubleshoot during the day. Thanks!

—> Purchase or Repair:

#Westronics by Panchal on 2013-08-15 10:01

The Westronics SDI 300 SDI-0-130-010-00 is displaying Error Code 27, indicating a communication failure with the sensor. Please advise on troubleshooting steps or potential solutions. Thank you.

—> Purchase or Repair:

#Westronics by Mark Choi on 2012-08-06 11:24

The Westronics CS1778-1 11701 Moisture Recorder unit is not working and needs attention.

—> Purchase or Repair:

#Westronics by cristofo leite on 2013-08-10 04:35

The Westronics 345#14588 chart recorder went down mid-shift. Please check and fix it asap. Thanks!

—> Purchase or Repair:

#Westronics by ACE IVEY on 2011-02-25 16:25

PLEASE ADVISE, I NEED INFORMATION ON PRICING AND AVAILABILITY ON THE FOLLOWING ITEM:EARTH GROUNDING RESISTANCE MONITOR, MAKE: WESTRONICSTYPE: SBAG-202MANY THANKS FOR YOUR ASSISTANCE ON THIS MATTER. I AM LOOKING FORWARD TO YOUR SOONEST REPLY.

—> Purchase or Repair:

#Westronics by DANIEL ZIJLMANS on 2025-05-28 08:29

Machine displaying "Error Code 101."

—> Purchase or Repair:

#Westronics by k johnpaul on 2011-12-02 15:35

One of our sensor monitor out put is -5 MA against the full scale out put of 1 MA. The sensor is in alarm condition. The insulation indicator needle is in the -ve direction, kindly advise.

—> Purchase or Repair:

#Westronics by packing machine on 2013-08-22 09:32

I am following up on my previous message regarding the Westronics 345#14588 chart recorder unit still being down. I need a response from you

—> Purchase or Repair:

#Westronics by justilio on 2013-01-13 23:37

The Westronics SDI 300 is displaying error code "E-5" along with a continuous beeping alarm. Equipment is currently down, unable to display any data. Please advise on next steps for troubleshooting and repair. Thank you.

—> Purchase or Repair:

#Westronics by Núñez on 2013-09-23 23:48

Please advise if the Westronics Series 2600 2600-111-000-000-11 chart recorder is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:

#Westronics by david suh on 2006-07-25 01:36

==Urgent==To whom who may concered- ==Urgent==As we are one of the user of the Westronics: Model DDR10 & Part PA100056-01 Power Supply Cards , there was power problem. The fuse was out of order & we have changed to new one(same specification from original sources) for 3 times.( Replaced the original…Purchase or Repair:

#Westronics by Gayland Testerman on 2005-12-30 02:51

The Westronics DDR10 PA100056-01 is causing frequent line stoppages due to a malfunctioning heating element. Immediate repair is needed to avoid production delays.

—> Purchase or Repair:

#Westronics by Gimi on 2012-05-24 02:56

I'm experiencing difficulties with the Westronics CS1778-1 11701 Moisture Recorder - it seems to have stopped working properly. I'm not sure of the exact issue, but I would appreciate some assistance in resolving this problem. Thank you for your help with this.

—> Purchase or Repair:

#Westronics by Larry Long on 2005-12-20 22:47

We are experiencing frequent stoppages on the Westronics DDR-10 PA100056-01, affecting production output. Immediate attention and repair service are urgently needed to get the line running smoothly again.

—> Purchase or Repair:

#Westronics by hoa van on 2013-11-23 21:24

The Westronics Series 2600 2600-111-000-000-11 chart recorder unit went down mid-shift. Please follow up during the day.

—> Purchase or Repair:

#Westronics by Bobby Nolan on 2013-06-11 21:43

Westronics Series 2600 2600-111-000-000-11 chart recorder not printing any charts despite power and all connections checked and verified.

—> Purchase or Repair:

#Westronics by Howard Neal on 2005-12-28 07:12

We have a critical issue with the Westronics DDR10 PA100056-01 causing a complete stoppage on the line. Urgent action needed to diagnose and repair immediately to resume operations.

—> Purchase or Repair:

#Westronics by larry c. naffziger on 2013-07-09 05:32

I have a Westronics SDI 300 SDI-0-130-010-00 Smart Digital Indicator that is no longer displaying any information. Looking for repairs ASAP.

—> Purchase or Repair:

#Westronics by Khelfhoum on 2008-06-06 12:31

I'm experiencing some issues with the power supply of the Westronics 3000 PA100056-03. It seems like something has stopped working as expected. I'm not entirely sure what the problem is, but your help would be greatly appreciated.

—> Purchase or Repair:

#Westronics by Strohmenger on 2013-06-21 07:46

The Westronics SDI 300 SDI-0-130-010-00 is showing error code 005. The display is blank and not responding to any input. Please advise on troubleshooting steps.

—> Purchase or Repair:

#Westronics by Peter E. Marcus on 2013-12-10 13:55

The Westronics Series 2600 2600-111-000-000-11 chart recorder experienced downtime earlier today between 1040 AM and 1215 PM causing a delay in the production process. Could you please look into this and provide urgent feedback before the next shift? Thank you.

—> Purchase or Repair:

#Westronics by Ghanwat on 2012-01-29 18:44

I'm experiencing some trouble with the Westronics CS1778-1 11701 Moisture Recorder. It seems like something has stopped working, but I'm not exactly sure what the issue is. Can you please help me diagnose and resolve the problem?

—> Purchase or Repair:

#Westronics by George Pantelic on 2012-02-12 09:54

Experiencing issues with my Westronics CS1778-1 11701 Moisture Recorder unit. Need professional repair service, ASAP.

—> Purchase or Repair:

#Westronics by VINEETH RAJ on 2013-07-26 23:32

Could you please confirm if the Westronics 345#14588 chart recorder is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:

#Westronics by J.Y. HENRY on 2024-11-08 00:00

Repair Inquiry for Westronics 3000 PrinterHello,I am reaching out on behalf of our client with a Westronics 3000 Printer (part number not available) that is experiencing some issues. The printer is not functioning properly and is in need of repair. Could you please provide information on the repair …Purchase or Repair:

#Westronics by Grant-Henderson on 2012-02-25 15:51

The Westronics CS1778-1 11701 moisture recorder unit in the warehouse is exhibiting abnormal behavior.

—> Purchase or Repair:

#Westronics by Meta on 2013-04-10 23:34

The Westronics Series 2600 chart recorder unit 2600-111-000-000-11 is behaving unusually in the warehouse.

—> Purchase or Repair:

#Westronics by Carlos Melo on 2008-10-26 11:08

The power supply on Westronics 3000 PA100056-03 just failed. Need immediate attention to get it back up and running.

—> Purchase or Repair:

#Westronics by Sharon Casey on 2006-09-13 23:11

I am a business customer with a Westronics SM100 Servo Drive unit that is not functioning properly. The unit is failing to respond to commands, resulting in erratic movements and inconsistent performance. Based on the initial assessment, the repair cost is estimated to exceed $1000 due to the comple…Purchase or Repair:

#Westronics by Olejnik Leszek on 2012-01-01 04:39

Manual and documentation for PCB

—> Purchase or Repair:

#Westronics by kulwnt on 2013-05-12 15:20

My Westronics SDI 300 SDI-0-130-010-00 Smart Digital Indicator is malfunctioning and needs repair. Seeking help from a professional technician experienced with industrial units. Thank you.

—> Purchase or Repair:

#Westronics by Henning Hamann on 2008-02-26 07:13

Hallo,I need the price and the availability for a Grounding resistance montitor, Supply Voltage AC 110V 60Hz, for 440V bus,Serieal No.: 9C09106, Type SBAG-102 Main switch borad# M4-8235\'41Built in 1999, Manufacturer \"Westronics\"\"Seobu el\" KoreaI Need the price for a new one.I Hope you can help …Purchase or Repair:

#Westronics by Joe Harvat on 2006-01-31 00:00

Looking for repair service for a malfunctioning Westronics CB100351-01 MUX 64 Point unit. experiencing intermittent signal loss and data transmission issues. Need assistance urgently.

—> Purchase or Repair:

#Westronics by Richard Zelm on 2015-06-26 17:04

Can you please tell me what the measurement voltage is that the SBAG Ground Monitor uses to monitor the insulation? Is it 24 VDC? I can\'t find anything in their specs that tells you what the output voltage is that monitors the insulation. Thanks!

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.