sim2 for Service call 1-336-969-0110 at Industrial Electronics Repair

sim2 Service & Repair Forum

I think there might be an issue with your SIM2 PC312.0 C60.0123.100. The monitor function seems to have stopped working. Would you like me to look into it further for you?

— Posted by Ashley on 2008-02-10

Reply🗨️Ask a New Question Below❓

If you need your sim2 unit tested or repaired,
give us a call at 1-336-969-0110.
We offer fair estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 219 Comments

#sim2 by nazeer ahmed on 2008-01-02 20:32

The sim2 pc312.0 c60.0123.100 monitor unit is exhibiting abnormal behavior. It is not functioning as it normally does.

#sim2 by BERNADETH on 2008-01-06 01:41

Sim2 PC312.0 C60.0123.200 monitor displaying a blank screen.

#sim2 by Midwest Micro on 2008-01-07 23:02

The SIM2 PC312.0 C60.0123.200 monitor is currently not working as reported from the shop.

#sim2 by nakson on 2008-01-09 06:12

The unit sim2 pc312.0 c60.0123.100 is a monitor but it is not working. Please check and repair. Thank you.

#sim2 by PHIL RUSH on 2008-01-12 02:27

I'm currently experiencing issues with the SIM2 PC312.0 C60.0123.100. It appears to be related to the monitor, but I'm uncertain about the exact problem. Any assistance or guidance would be greatly appreciated. Thank you.

#sim2 by imran khan on 2008-01-12 09:27

There was a downtime caused by the Sim2 PC312.0 C60.0123.100 monitor unit. It occurred . Need quick resolution before the next shift. Thank you.

#sim2 by BILL RITGER on 2008-01-15 15:35

The sim2 pc312.0 c60.0123.200 is a monitor unit that isn't working.

#sim2 by Sanjay on 2008-01-15 18:35

Please provide the necessary details so we can check if the Sim2 PC312.0 C60.0123.200 monitor is still supported or if replacement parts are available. Thank you.

#sim2 by E.D.Bau und Vermietu on 2008-01-16 19:38

Hello, we have a Sim2 PC312.0 C60.0123.200 monitor that's not working and we need a replacement or repair info. Can you provide assistance? Thank you.

#sim2 by Zepeda on 2008-01-17 08:56

Please provide me with a fast, direct message asking if they have a SIM2 PC312.0 C60.0123.200 monitor available.

#sim2 by Ghulam on 2008-01-17 17:23

Need assistance with repairing Sim2 PC312.0 C60.0123.200 industrial monitor unit. The screen is not displaying any images, and we require urgent technical support to get it operational again.

#sim2 by Clint on 2008-01-17 20:23

Drive or board failure in sim2 pc312.0 c60.0123.100 monitor. Need immediate attention.

#sim2 by Donald Van Orman on 2008-01-22 08:05

Can you provide information on the availability of a replacement for the sim2 pc312.0 c60.0123.200 monitor unit to keep production running smoothly? Thank you.

#sim2 by hamed on 2008-01-22 09:05

Hi, I need urgent clarification on what happened with sim2 pc312.0 c60.0123.100 monitor causing downtime. Please provide details of the incident and timing. Thanks!

#sim2 by Anthonyseatt on 2008-01-22 20:19

The SIM2 PC312.0 C60.0123.200 monitor is displaying error code E203 and showing a black screen. Need urgent assistance to resolve the issue.

#sim2 by HEMESH PAL on 2008-01-22 23:19

Hi there, I need repair info for a SIM2 PC312.0 C60.0123.200 monitor. Can you provide details ASAP? Thank you.

#sim2 by JOSHI on 2008-01-23 17:19

Please provide more information about the Sim2 PC312.0 C60.0123.200 monitor. We'll assist in determining if it's still supported and if replacement parts are available. Thank you.

#sim2 by Essam on 2008-01-23 18:31

I'm having trouble with the Sim2 PC312.0 C60.0123.100 - I believe it's a monitor. It seems like something has stopped working, but I'm not quite sure what. Any help would be appreciated.

#sim2 by Dennis OBrien on 2008-01-23 23:31

Could you please provide me with the pricing and availability of the Sim2 PC312.0 C60.0123.200 monitor unit? I am looking to source one quickly and would appreciate your

#sim2 by daya on 2008-01-25 22:59

Hi, do you have a Sim2 PC312.0 C60.0123.200 monitor available for sale or repair? Thanks.

#sim2 by Deivid on 2008-01-26 01:59

Monitor not displaying any image after powering on.

#sim2 by Evegniy on 2008-01-31 09:05

The monitor on sim2 pc312.0 c60.0123.200 is malfunctioning and affecting the production line. Immediate attention and repair are needed to prevent further delays. Take action

#sim2 by HAZLINA on 2008-02-01 15:12

LCD monitor displaying "No Signal" error message.

#sim2 by Mirea Pavel on 2008-02-01 16:12

Unit sim2 pc312.0 c60.0123.200 (monitor) went down mid-shift. Needs attention ASAP. Please check and repair during the day.

#sim2 by Ray Margel on 2008-02-03 08:58

Hey team, need assistance with Sim2 PC312.0 C60.0123.200 monitor. Just identified a drive or board failure during my rounds. Getting it sorted ASAP.

#sim2 by jalil on 2008-02-07 13:04

Can you please confirm if you have a replacement unit available for the Sim2 PC312.0 C60.0123.100 monitor? Thank you.

#sim2 by Independentmgc on 2008-02-07 14:04

Could you please verify if the SIM2 PC312.0 C60.0123.100 monitor is still supported or if replacement parts are available? Thank you.

#sim2 by Prabha Shankar Choubey on 2008-02-09 03:37

I have a sim2 pc312.0 c60.0123.200 monitor that needs repair. It isn't displaying any images or responding to inputs. Please let me know if you can help fix it. Thank you.

#sim2 by Mordal on 2008-02-09 07:37

The sim2 pc312.0 c60.0123.200 is a monitor unit that is not working.

#sim2 by Thielman on 2008-02-09 08:37

Please contact the manufacturer of the SIM2 PC312.0 C60.0123.200 monitor to inquire about its current support status and the availability of replacement parts.

#sim2 by LaCruze on 2008-02-10 13:10

Sim2 PC312.0 C60.0123.200 monitor displaying "No signal" error, halting production.

#sim2 by Ashley on 2008-02-10 16:10

I think there might be an issue with your SIM2 PC312.0 C60.0123.100. The monitor function seems to have stopped working. Would you like me to look into it further for you?

#sim2 by Otto Schmidt on 2008-02-10 17:10

Please provide more information about the Sim2 PC312.0 C60.0123.200 monitor so we can determine its manufacturer and check if replacement parts or repair options are still available. Thank you.

#sim2 by Ika on 2008-02-12 03:31

The sim2 pc312.0 c60.0123.200 monitor unit went down mid-shift. Please check and follow up in the morning. Thank you!

#sim2 by Pablo Amoedo on 2008-02-12 05:31

Need a technician to fix my Sim2 PC312.0 C60.0123.100 monitor. Unit is powering on but not displaying any images. Please reply if available to repair.

#sim2 by Van Hung on 2008-02-12 12:31

Sim2 PC312.0 C60.0123.100 monitor not displaying any image.

#sim2 by Eric Schneider on 2008-02-13 22:58

Hey team, the SIM2 PC312.0 C60.0123.200 monitor went down during the night shift. It needs to be checked and fixed tomorrow.

#sim2 by Bracy on 2008-02-14 17:19

The SIM2 PC312.0 C60.0123.100 monitor unit is displaying erratic behavior. It is not functioning as it normally does and acting unusual.

#sim2 by Sanixa on 2008-02-14 19:19

Can you please provide pricing and availability information for the Sim2 PC312.0 C60.0123.200 monitor? We are looking to source one quickly and would appreciate any assistance you can provide. Thank you.

#sim2 by ATEF OSMAN on 2008-02-14 21:19

Sim2 PC312.0 C60.0123.200 monitor is displaying a blank screen.

#sim2 by Olejnik on 2008-02-15 17:21

Can the sim2 pc312.0 c60.0123.200 monitor be repaired or bought? I'm trying to check this off my to-do list.

#sim2 by Saminder on 2008-02-17 05:25

The SIM2 PC312.0 C60.0123.200 monitor experienced downtime due to a technical issue earlier today. Could you please provide a quick update on what occurred and when it happened? Thank you.

#sim2 by Kent Allard on 2008-02-17 07:25

The SIM2 PC312.0 C60.0123.200 is not working. Your assistance is needed to address the issue.

#sim2 by Oliver Lee Brooks on 2008-02-17 11:25

Do you have a sim2 pc312.0 c60.0123.200 monitor available for repair or purchase? Production is down and we need a solution quickly.

#sim2 by Bandeally on 2008-02-17 13:25

Machine is displaying error code C60.0123.200.

#sim2 by Fortio on 2008-02-17 14:25

Hello, I'm interested in purchasing the SIM2 PC312.0 C60.0123.200 monitor. Could you please provide me with information on pricing and availability? I'm looking to source one quickly. Thank you!

#sim2 by Ha on 2008-02-17 15:25

Something isn't working on the SIM2 PC312.0 C60.0123.100 monitor. Could you please provide repair information? We need a quick response. Thank you.

#sim2 by AMELIA on 2008-02-19 19:30

I'm sorry to hear that your SIM2 PC312.0 C60.0123.100 monitor is acting up. It seems like something stopped working, but I'm not exactly sure what's causing the issue. I recommend reaching out to technical support for assistance in diagnosing and fixing the problem.

#sim2 by john wallin on 2008-02-20 02:29

The Sim2 PC312.0 C60.0123.100 monitor is not working.

#sim2 by Ancuta on 2008-02-21 22:30

The unit is still down. Please reply to this message

#sim2 by Allen Sutfin on 2008-02-22 15:26

Please provide assistance with sim2 pc312.0 c60.0123.200 monitor. Thank you.

#sim2 by Hawk on 2008-02-22 17:26

Hello, I'm interested in purchasing the Sim2 PC312.0 C60.0123.200 monitor. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you!

#sim2 by Angga on 2008-02-24 10:52

The sim2 pc312.0 c60.0123.100 monitor unit is displaying abnormal behavior in the warehouse. The device is not functioning as expected and is behaving strangely.

#sim2 by Borg on 2008-02-26 11:13

I'm having trouble with the SIM2 PC312.0 C60.0123.200. It seems to be a monitor, but it's not working. I'm not exactly sure what the issue is, but I would appreciate any assistance you can provide.

#sim2 by Richter on 2008-02-26 12:13

Hello, I need repair info for a SIM2 PC312.0 C60.0123.200 monitor. Something has stopped working, and we need a replacement. Please send repair details ASAP. Thank you.

#sim2 by ABDUL AZIZ KHAN on 2008-02-27 23:51

The Sim2 PC312.0 C60.0123.200 monitor is showing abnormal behavior. It is not functioning as it normally does.

#sim2 by YUANITA on 2008-02-28 00:51

The SIM2 PC312.0 C60.0123.200 monitor unit experienced downtime. The issue occurred today at 300 PM, causing disruption to operations. Can you provide a quick update on the situation before the next shift arrives? Thank you.

#sim2 by Swami Soto on 2008-02-28 08:51

My Sim2 PC312.0 C60.0123.200 monitor is not displaying any images. Need repair services as soon as possible. Thank you.

#sim2 by Sean K Winchcombe on 2008-02-29 17:04

Hello, I'm inquiring if the Sim2 PC312.0 C60.0123.200 monitor can be repaired or replaced. I'm trying to check this off my to-do list. Thank you.

#sim2 by Vigil on 2008-02-29 20:06

Experiencing issues with Sim2 PC312.0 C60.0123.200 monitor unit. Seeking quick repair service.

#sim2 by DominicJ. on 2008-02-29 21:06

Is the Sim2 PC312.0 C60.0123.200 monitor still supported or are replacement parts available for this older unit?

#sim2 by Richard Sieger on 2008-03-01 01:06

My client has a Sim2 PC312.0 C60.0123.200 monitor that needs repair. Can you provide more information and details on servicing this particular model? Thank you.

#sim2 by Carlos Pio dos Reis on 2008-03-01 02:06

PC312.0 C60.0123.200 monitor not displaying any images.

#sim2 by Rajkumar on 2008-03-01 03:06

The SIM2 PC312.0 C60.0123.200 is a monitor unit that is currently not working.

#sim2 by religion on 2008-03-03 08:26

The sim2 pc312.0 c60.0123.100 monitor unit went down during the night shift. Please follow up on this during the day.

#sim2 by Ed salvagin on 2008-03-05 01:42

Hello, do you have a replacement Sim2 PC312.0 C60.0123.200 monitor available for sale or repair? Our unit is down, and we need it to keep production running. Thank you.

#sim2 by Mike Bowman on 2008-03-05 03:42

The SIM2 PC312.0 C60.0123.200 monitor is malfunctioning, causing a halt in production line operations. Urgent action is required to get it repaired

#sim2 by Keith tattersall on 2008-03-07 07:30

Issue Sim2 PC312.0 C60.0123.200 monitor not displaying any output.

#sim2 by Nugroho Joko Susilo on 2008-03-07 12:33

Can this Sim2 PC312.0 C60.0123.100 monitor be repaired or bought to resolve the issue? I'm trying to check this off my to-do list. Thank you.

#sim2 by FETOUHI on 2008-03-07 20:19

The Sim2 PC312.0 C60.0123.200 monitor is experiencing intermittent display issues, causing disruptions in our production line. Immediate repair service is required to minimize downtime and ensure seamless operations.

#sim2 by ukundwanimana fabien on 2008-03-08 00:19

Hello, I am very interested in purchasing the Sim2 PC312.0 C60.0123.200 monitor. I am not 100% sure if this is the correct model, but my team suggested I reach out to inquire. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

#sim2 by Ladvinskaya on 2008-03-08 03:19

The Sim2 PC312.0 C60.0123.100 monitor is not working.

#sim2 by Jotty George on 2008-03-08 04:19

Unit Sim2 PC312.0 C60.0123.200, a monitor, experienced downtime today. It went down around 1030 AM, causing disruption. Could you please investigate and provide an update before the next shift arrives? Thank you.

#sim2 by Doak on 2008-03-10 13:52

The SIM2 PC312.0 C60.0123.200 monitor is not working.

#sim2 by Stabel on 2008-03-10 14:52

We have a critical issue with the SIM2 PC312.0 C60.0123.200 monitor affecting the production line. Immediate repair service is needed to restore operations

#sim2 by Bob Herbick on 2008-03-10 17:52

Looking for a technician to repair my Sim2 PC312.0 C60.0123.100 monitor unit. The screen is not displaying any images. Need assistance ASAP.

#sim2 by Deaton on 2008-03-12 04:13

One of the drives or boards just failed in the sim2 pc312.0 c60.0123.200 monitor. Will investigate further and provide an update shortly.

#sim2 by Steve Van Booven on 2008-03-12 05:13

Drive or board failure detected on sim2 pc312.0 c60.0123.100 monitor during rounds. Will investigate and address shortly.

#sim2 by Patricia Cimino on 2008-03-12 17:05

Please provide the necessary information about the SIM2 PC312.0 C60.0123.100 monitor, as we need to inquire about its support and the availability of replacement parts. Thank you.

#sim2 by tonie acuavera on 2008-03-12 23:05

Please provide information and repair options for sim2 pc312.0 c60.0123.200 monitor. Thank you.

#sim2 by Brandon Park on 2008-03-13 02:05

The sim2 pc312.0 c60.0123.200 monitor unit experienced a malfunction during the night shift. Please investigate and address the issue

#sim2 by Oslay Quintana on 2008-03-14 17:36

The Sim2 PC312.0 C60.0123.200 monitor unit experienced downtime today. Can you provide more information about what happened so we can address the issue before the next shift?

#sim2 by BUSCHER on 2008-03-14 19:36

Sim2 PC312.0 C60.0123.200 monitor issue Drive or board failure. Scheduled for repair.

#sim2 by romagnoli on 2008-03-14 22:36

The SIM2 PC312.0 C60.0123.200 monitor is displaying abnormal behavior in the warehouse.

#sim2 by chris siberas on 2008-03-15 01:36

Hi there, I'm interested in the Sim2 PC312.0 C60.0123.200 monitor and would like to inquire about pricing and availability. My team recommended reaching out to you, and I'm hoping to source this unit quickly. Can you please provide more information? Thank you.

#sim2 by Daniel Beck on 2008-03-15 03:36

Hi there, we have a Sim2 PC312.0 C60.0123.200 monitor that needs repair or replacement. Could you please provide us with repair information or suggest where to find a replacement? Thank you.

#sim2 by Decroos Jan on 2008-03-15 04:36

Unit SIM2 PC312.0 C60.0123.100Description MonitorSubject Downtime ReportDear Supervisor,I am reporting a downtime event involving the SIM2 PC312.0 C60.0123.100 monitor. The issue occurred earlier today, causing a disruption in operations. Could you please investigate and provide a quick response bef…...
Show More

#sim2 by Junaidi Ismail on 2008-03-16 05:28

Sim2 PC312.0 C60.0123.200 monitor displaying a blank screen and not responding to input commands.

#sim2 by feyyaz on 2008-03-16 06:28

Please confirm if you have a replacement unit available for SIM2 PC312.0 C60.0123.200 monitor. Our production is halted, and we need your support to keep operations running smoothly.

#sim2 by Sabrina Alves Rezend on 2008-03-16 09:28

The SIM2 PC312.0 C60.0123.100 monitor unit isn't working.

#sim2 by Lucjan on 2008-03-17 22:20

Can this Sim2 PC312.0 C60.0123.200 monitor be repaired or replaced? I'm looking to check this off my to-do list. Thank you!

#sim2 by Hugo Iglesias on 2008-03-18 21:52

The sim2 pc312.0 c60.0123.200 monitor is not working.

#sim2 by Nadid on 2008-03-19 17:19

Could you please clarify if the Sim2 PC312.0 C60.0123.200 is a monitor that needs to be repaired or replaced? I'm trying to check this off my to-do list. Thank you.

#sim2 by krishanu ray on 2008-03-20 14:34

Can this Sim2 PC312.0 C60.0123.200 monitor be repaired or bought? I'm trying to check this off my to-do list.

#sim2 by FERNANDO CHAPARRO on 2008-03-20 18:56

We are following up regarding the Sim2 PC312.0 C60.0123.200 monitor, which is still down. Please ensure someone responds

#sim2 by Ruben on 2008-03-20 21:56

The SIM2 PC312.0 C60.0123.100 monitor unit caused downtime earlier today. Need quick info on what happened.

#sim2 by Chad on 2008-03-21 00:56

The sim2 pc312.0 c60.0123.200 monitor experienced downtime today at 1045 AM. We are currently investigating the cause. Can you provide any insights or assistance before the next shift starts?

#sim2 by Sanjay Pradhan on 2008-03-21 01:56

Sim2 PC312.0 C60.0123.200 monitor is not turning on.

#sim2 by percy villanes ccala on 2008-03-21 03:56

Having issues with my Sim2 PC312.0 C60.0123.200 monitor. Need a technician to repair it ASAP. Thank you.

#sim2 by PATARROYO on 2008-03-21 06:56

The SIM2 PC312.0 C60.0123.200 monitor unit is not working.

#sim2 by Ashokkumar on 2008-03-21 08:56

The SIM2 PC312.0 C60.0123.200 monitor is not working.

#sim2 by carleen on 2008-03-21 10:53

Hey team, the sim2 pc312.0 c60.0123.200 monitor went down mid-shift. Please check it out and follow up tomorrow. Thanks!

#sim2 by John Gemzsi on 2008-03-21 12:53

Could you please clarify whether the Sim2 PC312.0 C60.0123.200 monitor needs to be repaired or replaced? I am looking to get this sorted out and checked off my to-do list. Thank you.

#sim2 by Jeffrey Reeves on 2008-03-21 16:53

Hello, I need repair info for a SIM2 PC312.0 C60.0123.200 monitor. Our employee reported it's not working. Can you provide details for a quick fix or replacement? Thank you.

#sim2 by charles green on 2008-03-21 18:53

I need assistance with my sim2 pc312.0 c60.0123.200 monitor. Are replacement parts or repair options still available for this unit even though it's older and the manufacturer is unknown?

#sim2 by Dominguez on 2008-03-22 00:53

Sim2 PC312.0 C60.0123.200 monitor down. Showing error code C-123. Need urgent assistance to resume operations. Thank you.

#sim2 by KUMARADEVAN on 2008-03-22 02:53

I can help with that. I will write a brief message to inquire about the support or availability of parts for the Sim2 PC312.0 C60.0123.200 monitor unit.

#sim2 by Jeremiah Foertsch on 2008-03-22 08:53

SIM2 PC312.0 C60.0123.200 monitor issue Drive or board failure detected during maintenance rounds. Please assign a replacement ASAP.

#sim2 by Sanixa on 2008-03-23 09:09

Drive or board failure detected on sim2 pc312.0 c60.0123.100 monitor during rounds. Investigating further, will update when resolved.

#sim2 by shermnan on 2008-03-23 11:09

The sim2 pc312.0 c60.0123.200 monitor is not working.

#sim2 by Nikola on 2008-03-30 19:45

Having trouble with my Sim2 PC312.0 C60.0123.200 monitor. Need a repair technician urgently.

#sim2 by MAG Maintenance on 2008-04-02 14:07

The Sim2 PC312.0 C60.0123.200 monitor unit went down mid-shift. It needs attention and troubleshooting as soon as possible. Thanks!

#sim2 by Bruce K. Hoar on 2008-04-04 18:50

The monitor on the sim2 pc312.0 c60.0123.100 is malfunctioning, affecting the production line. Action needed urgently to restore operations.

#sim2 by Anil Bolonghe on 2008-04-10 18:51

Looking for repair for my Sim2 PC312.0 C60.0123.200 monitor. It's not displaying any images, all I see is a black screen. Need assistance urgently.

#sim2 by CHARLOTTE on 2008-04-13 14:31

Please confirm if the sim2 pc312.0 c60.0123.200 monitor is still supported or if replacement parts are available. Thank you.

#sim2 by Beauford Millwood on 2008-04-14 15:27

Please provide assistance with sim2 pc312.0 c60.0123.200 monitor. My client is facing issues with this device and needs help with repairs. Thank you.

#sim2 by Jill on 2008-04-17 11:33

I'm experiencing trouble with the SIM2 PC312.0 C60.0123.200 monitor. It appears to have stopped working properly, and I'm not sure what the issue might be. Any help or guidance would be greatly appreciated.

#sim2 by NESTOR VERGANI on 2008-04-26 07:36

I'm experiencing an issue with the Sim2 PC312.0 C60.0123.200 monitor. It seems like something has stopped working, and I'm not quite sure what the problem could be. Any insights or advice would be greatly appreciated.

#sim2 by Ngoni on 2008-04-28 21:37

Please provide assistance with sim2 pc312.0 c60.0123.200 monitor. Client needs repair service for this product. Thank you.

#sim2 by Timothyfains on 2008-04-29 09:24

The sim2 pc312.0 c60.0123.200 is a monitor unit that isn't working. Requesting assistance from the maintenance team.

#sim2 by Jun Gi Lee on 2008-05-08 12:13

The Sim2 PC312.0 C60.0123.200 monitor unit is not working.

#sim2 by Eli Berkowitz on 2008-05-12 02:51

The Sim2 PC312.0 C60.0123.200 monitor unit experienced downtime today due to a technical issue. The incident occurred between 1130 AM and 145 PM. Could you provide insight into what may have caused this unexpected problem? Thank you.

#sim2 by WilfredLeway on 2008-05-12 23:58

Hello, I need repair info for a Sim2 PC312.0 C60.0123.200 monitor. Can you provide details on how to fix it or where I can get a replacement? Thank you.

#sim2 by Eusebio on 2008-05-20 18:29

Can you please confirm if the sim2 pc312.0 c60.0123.200 monitor is still supported or if replacement parts are available for it? Thank you.

#sim2 by Rick Burdge on 2008-05-21 23:34

Could you please provide details regarding support and availability of parts for the Sim2 PC312.0 C60.0123.200 monitor? It is an older unit, and we are unsure about the manufacturer. Thank you.

#sim2 by Maurici on 2008-05-23 03:17

Our Sim2 PC312.0 C60.0123.200 monitor unit is still down. We did not receive a reply to our previous message. Please provide an immediate update on the status of this issue.

#sim2 by Goulet on 2008-05-28 19:10

The SIM2 PC312.0 C60.0123.100 monitor is currently displaying the error code E122 and is not powering on. Please advise on troubleshooting steps. Thank you.

#sim2 by Kirk on 2008-05-28 20:54

I'm having trouble with the SIM2 PC312.0 C60.0123.200 monitor. It seems like something has stopped working, but I'm not entirely sure what the issue is. Any assistance or advice would be greatly appreciated. Thank you.

#sim2 by KEN TRAXINGER on 2008-05-30 01:44

Please provide an update on the status of the sim2 pc312.0 c60.0123.200 monitor. This issue needs immediate attention.

#sim2 by Des Whitaker on 2008-06-03 03:47

The SIM2 PC312.0 C60.0123.100 monitor unit experienced technical issues, causing downtime. This occurred earlier today during the morning shift. Please provide assistance as soon as possible to resolve the problem before the next shift starts. Thank you.

#sim2 by Siiss on 2008-06-07 19:31

I need assistance with my sim2 pc312.0 c60.0123.200 monitor. Can you please confirm if this unit is still supported or if replacement parts are available? Thank you.

#sim2 by kuldeep on 2008-06-07 20:31

Hello, I am following up on my previous message regarding the Sim2 PC312.0 C60.0123.100 monitor. The unit is still down. Please ensure a

#sim2 by Jeevananda on 2008-06-08 11:30

Our Sim2 PC312.0 C60.0123.200 monitor is still down. This issue needs urgent attention. Please make sure to respond to this message

#sim2 by Candel on 2008-06-10 17:53

Need repair for Sim2 PC312.0 C60.0123.200 monitor unit. It's not displaying any images or powering on. Please let me know if you can fix it. Thank you.

#sim2 by Donald Jackson on 2008-06-14 01:41

Hello, I hope this message finds you well. We are currently looking for a replacement or repair option for the SIM2 PC312.0 C60.0123.200 monitor. It's an older unit, and we are unsure about the manufacturer. Could you please advise if this model is still supported or if parts are available for this …...
Show More

#sim2 by Laduron on 2008-06-16 18:06

Sim2 PC312.0 C60.0123.200 monitor unit is down. Need to keep production running. Do you have a replacement unit available for sale or repair?

#sim2 by Andersen on 2008-06-29 05:40

Monitor not displaying any image on sim2 pc312.0 c60.0123.200.

#sim2 by Bonilla on 2008-07-01 15:02

Having issues with my SIM2 PC312.0 C60.0123.100 monitor at work. Need help fixing it ASAP.

#sim2 by hernando on 2008-07-02 21:25

The sim2 pc312.0 c60.0123.100 monitor is still down. Please respond

#sim2 by Ghulam on 2008-07-03 07:58

Can this Sim2 PC312.0 C60.0123.200 monitor be repaired or bought? I'm trying to check this off my to-do list.

#sim2 by lora on 2008-07-03 09:58

Please advise if the Sim2 PC312.0 C60.0123.200 monitor is still supported and if replacement parts are available. Thank you.

#sim2 by Giovanni Cabas on 2008-07-10 07:31

One of the drives or boards in sim2 pc312.0 c60.0123.200 monitor just failed. Need immediate attention and replacement.

#sim2 by Buena on 2008-07-11 17:04

Do you have a sim2 pc312.0 c60.0123.200 monitor available for sale or repair? Need it urgently to keep production running.

#sim2 by Suliman Mohammed on 2008-07-11 20:04

Can this sim2 pc312.0 c60.0123.200 monitor be repaired or bought? I'm trying to check this off my to-do list.

#sim2 by carrasco on 2008-07-12 07:49

I need assistance with my sim2 pc312.0 c60.0123.200 monitor. The unit is not working, and I need to ensure production continues. Do you have any available for repair or for sale?

#sim2 by Ramiro García on 2008-07-12 10:15

Please let me know if you have a replacement Sim2 PC312.0 C60.0123.200 monitor available. Thank you.

#sim2 by Nikolas Goulandris on 2008-07-12 11:15

The unit labelled sim2 pc312.0 c60.0123.200 is currently not functioning. Description monitor.

#sim2 by radesh on 2008-07-15 12:16

I'm having trouble with the Sim2 PC312.0 C60.0123.100. For some reason, the monitor seems to have stopped working. I'm not entirely sure what might be the issue.

#sim2 by Lal Wijesinghe on 2008-07-24 18:58

The unit Sim2 PC312.0 C60.0123.100 is a monitor that is currently not working. The maintenance team needs to address this issue

#sim2 by hiteshrana on 2008-07-29 04:14

The unit with code sim2 pc312.0 c60.0123.200 (monitor) in the warehouse is displaying abnormal behavior. Please provide details on what the unit is doing differently than normal.

#sim2 by Amburgey on 2008-07-30 00:47

Our Sim2 PC312.0 C60.0123.200 monitor is still down. This issue needs immediate attention. Please provide an update as soon as possible.

#sim2 by Pramote on 2008-07-30 01:47

Hi, I'm seeking repair info for a SIM2 PC312.0 C60.0123.100 monitor that needs a replacement ASAP. Can you provide details on how we can repair or replace this unit? Thanks.

#sim2 by Susan Clark on 2008-07-31 01:56

Our Sim2 PC312.0 C60.0123.200 monitor is still down. We need urgent assistance. Please have someone address this issue

#sim2 by DAVE ROSS on 2008-07-31 02:56

Our sim2 pc312.0 c60.0123.200 monitor is still down. Please provide assistance as soon as possible.

#sim2 by Gaurav on 2008-08-01 00:16

I'm having trouble with the sim2 pc312.0 c60.0123.100. The issue seems to be related to the monitor, but I'm not entirely sure what the problem is. Can you please provide assistance in troubleshooting this? Thank you.

#sim2 by Janick on 2008-08-01 11:36

Can this SIM2 PC312.0 C60.0123.200 monitor be repaired or bought? I'm trying to check this off my to-do list. Thank you!

#sim2 by Damini Jain on 2008-08-01 14:36

Could you please confirm if the Sim2 PC312.0 C60.0123.200 monitor is still supported or if replacement parts are available? We are looking to locate repair options for this older unit, but unsure about the manufacturer's current support status.

#sim2 by Nitzh on 2008-08-01 15:36

I'm experiencing some difficulties with the SIM2 PC312.0 C60.0123.200 monitor. It seems like something is not functioning properly, but I'm unsure what the exact issue might be. Any assistance you could provide would be greatly appreciated.

#sim2 by Dunne on 2008-08-03 00:17

My client is experiencing issues with a SIM2 PC312.0 C60.0123.200 monitor. Kindly provide details on repair services available for this particular model. Thank you.

#sim2 by Tull on 2008-08-03 01:17

I'm having an issue with the SIM2 PC312.0 C60.0123.200. The machine seems to be having problems, but I'm not exactly sure what's wrong. I appreciate any help or advice you can provide.

#sim2 by Danielglota on 2008-08-03 20:35

The Sim2 PC312.0 C60.0123.200 monitor is not working.

#sim2 by ehm on 2008-08-03 21:35

Can you confirm if you have a Sim2 PC312.0 C60.0123.200 monitor available for sale or repair to keep our production running? Thank you.

#sim2 by Sakhawat ali on 2008-08-11 05:44

Hello, I'm interested in purchasing the Sim2 PC312.0 C60.0123.200 monitor. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you!

#sim2 by Sørensen on 2008-08-13 12:50

The SIM2 PC312.0 C60.0123.200 monitor is currently down, displaying error code E23. Need assistance in resolving this issue

#sim2 by Shawn Rendo on 2008-08-13 13:50

The monitor on sim2 pc312.0 c60.0123.200 is malfunctioning, affecting the production line. This issue needs immediate attention to resume operations.

#sim2 by Guy on 2008-08-14 18:17

The SIM2 PC312.0 C60.0123.100 monitor is displaying error code "E305" upon startup. Need immediate support to troubleshoot and resolve the issue.

#sim2 by shaik khaja on 2008-08-16 09:36

The SIM2 PC312.0 C60.0123.200 monitor unit experienced a malfunction during the last shift, causing unexpected downtime. This occurred around 345 PM today. Can you provide a quick explanation for this issue before the next shift starts? Thank you.

#sim2 by rhirwayjoibia on 2008-08-16 11:24

Hi there, my Sim2 PC312.0 C60.0123.200 monitor isn't displaying any images. Looking for a repair technician who can diagnose and fix the issue

#sim2 by srl on 2008-08-16 13:24

Do you have a sim2 pc312.0 c60.0123.200 monitor available for repair or sale? Need it to keep production running.

#sim2 by Jeff King on 2008-08-18 06:28

I'm having trouble with the SIM2 PC312.0 C60.0123.100 monitor. It seems like something has stopped working, but I'm not exactly sure what it is. Any help would be appreciated.

#sim2 by Milan on 2008-08-20 01:15

The sim2 pc312.0 c60.0123.200 monitor experienced downtime due to an unknown issue earlier today. If you have any information about what went wrong, please let me know before the next shift begins. Thank you.

#sim2 by patel Himanshu on 2008-08-22 02:18

Please advise if the Sim2 PC312.0 C60.0123.100 monitor is still supported or if replacement parts are available for it. Thank you.

#sim2 by Dave Schreiner on 2008-08-23 12:55

Hello, the sim2 pc312.0 c60.0123.100 monitor is not working.

#sim2 by hermanto on 2008-08-25 11:43

The SIM2 PC312.0 C60.0123.100 monitor is not powering on.

#sim2 by Craig Van Ess on 2008-08-26 12:46

Hi, do you have a sim2 pc312.0 c60.0123.200 monitor available for purchase or repair? We need it to keep production running. Thank you.

#sim2 by Marsalis on 2008-08-26 13:46

Can this Sim2 PC312.0 C60.0123.200 monitor be repaired or purchased? I am trying to check this off my to-do list.

#sim2 by Akhilass on 2008-08-31 14:10

Hello, do you have a sim2 pc312.0 c60.0123.100 monitor available for sale or repair?

#sim2 by UMONDAK on 2008-08-31 15:10

Can you please confirm if you have a sim2 pc312.0 c60.0123.100 monitor available for purchase or repair? We need it urgently to keep production running.

#sim2 by Yolanda on 2008-09-03 19:02

Can you please confirm if you have a replacement unit available for Sim2 PC312.0 C60.0123.200 monitor? We need it urgently to keep production running smoothly. Thank you.

#sim2 by william deghetto on 2008-09-08 08:39

The sim2 pc312.0 c60.0123.200 unit is currently not working. It is related to monitoring.

#sim2 by Hana on 2008-09-08 15:00

The SIM2 PC312.0 C60.0123.200 is not functioning, it is a monitor.

#sim2 by MAICHEL on 2008-09-08 17:00

My client is experiencing issues with the SIM2 PC312.0 C60.0123.200 monitor. Kindly provide details on repair options and estimated costs. Thank you.

#sim2 by Albayrak on 2008-09-08 19:00

Hi there, I have a Sim2 PC312.0 C60.0123.200 monitor that needs repair. The screen is not displaying anything. Looking for a technician to fix it as soon as possible.

#sim2 by JULIAN DE LA GARZA on 2008-09-14 11:16

Sim2 PC312.0 C60.0123.100 monitor issue reported. Drive or board failure detected during rounds, immediate action required.

#sim2 by Tod on 2008-09-14 23:51

The SIM2 PC312.0 C60.0123.200 monitor unit is not working.

#sim2 by DiNino on 2008-09-17 17:03

The sim2 pc312.0 C60.0123.100 monitor unit experienced downtime today during the morning shift at 930 AM. I need to investigate the cause urgently before the next shift starts. Can you provide me with a quick answer on what went wrong with this unit? Thank you!

#sim2 by renante on 2008-09-19 19:02

Hello, I am interested in purchasing a sim2 pc312.0 c60.0123.100 monitor. Can you please let me know about pricing and availability? I am trying to source one quickly. Thank you!

#sim2 by carver on 2008-09-23 17:48

Hi, I need immediate assistance with SIM2 PC312.0 C60.0123.200 monitor unit which caused downtime. Can you please provide details on what happened and when it occurred? Thanks.

#sim2 by steven robinson on 2008-09-25 01:20

The sim2 pc312.0 c60.0123.200 is currently not functioning. Please investigate the issue further.

#sim2 by Zulmar on 2008-09-26 23:07

Can this Sim2 PC312.0 C60.0123.200 monitor be repaired or replaced? I'm working on checking this off my to-do list.

#sim2 by Hope Uwaya on 2008-10-05 01:08

Hello, I hope this message finds you well. I'm interested in purchasing the Sim2 PC312.0 C60.0123.100 monitor unit. I'm not completely certain if this is the exact model I need, but my team recommended I reach out to inquire about pricing and availability. I'm looking to source one quickly, so any i…...
Show More

#sim2 by Corder on 2008-10-05 02:08

Hey team, the sim2 pc312.0 c60.0123.200 monitor unit went down mid-shift. Need someone to check it out and fix it tomorrow. Thanks!

#sim2 by Elsie on 2008-10-13 07:00

Hi there, I am interested in purchasing the SIM2 PC312.0 C60.0123.200 monitor. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

#sim2 by Mabansag on 2008-10-13 09:00

The sim2 pc312.0 c60.0123.200 is not working. Please take a look at it.

#sim2 by madhukar on 2008-10-17 16:22

Hello, we need repair info for SIM2 PC312.0 C60.0123.200 monitor. Can you provide details quickly? Thank you.

#sim2 by truong on 2008-10-22 06:33

Could you please confirm if the sim2 pc312.0 c60.0123.200 monitor is still supported or if replacement parts are available? Thank you.

#sim2 by Starr on 2008-10-22 19:17

Please provide an update on the status of the SIM2 PC312.0 C60.0123.100 monitor. It is still down and we need assistance

#sim2 by Roberto Perez on 2008-10-22 20:17

Need immediate repair service for sim2 pc312.0 c60.0123.200 monitor. Issue affecting production line, urgent fix required.

#sim2 by pomerlea on 2008-10-26 14:08

The SIM2 PC312.0 C60.0123.200 monitor on the production line is experiencing display flickering and intermittent loss of signal, impacting manufacturing efficiency. Urgent repair is needed to ensure seamless operations.

#sim2 by abid on 2008-10-31 13:15

Hello, I am interested in purchasing the sim2 pc312.0 c60.0123.200 monitor. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

#sim2 by Chomen on 2008-11-07 15:25

Sim2 PC312.0 C60.0123.200 monitor board failure reported while doing rounds. Investigating further.

#sim2 by Joseph Buhagiar on 2008-11-09 20:50

Please provide details regarding the issue with the SIM2 PC312.0 C60.0123.100 monitor. My client is experiencing problems with it and would like to inquire about repair services. Thank you.

#sim2 by János on 2008-11-10 14:10

Hello, I am interested in purchasing the Sim2 PC312.0 C60.0123.200 monitor. Can you please provide information regarding pricing and availability? I am looking to source this unit quickly. Thank you.

#sim2 by author peete on 2008-11-10 16:10

Hello, I'm inquiring about the Sim2 PC312.0 C60.0123.200 monitor. We are trying to determine if this unit is still supported or if there are replacement parts available. Thank you.

#sim2 by Partida on 2008-11-14 13:14

Please provide an update on the current status of the Sim2 PC312.0 C60.0123.200 monitor. It is still not functioning, and we need assistance immediately. Thank you.

#sim2 by Paul Dolle on 2008-11-15 05:04

The unit SIM2 PC312.0 C60.0123.200, which is a monitor, experienced an issue causing downtime. Please provide details on what happened and when the incident occurred. Thank you.

#sim2 by Bicknerf on 2008-11-15 07:04

The sim2 pc312.0 c60.0123.200 is a monitor unit that is currently not working.

#sim2 by Glass on 2008-11-17 00:54

The SIM2 PC312.0 C60.0123.200 monitor is displaying error code E345. Unable to power on and screen remains blank. Please advise on troubleshooting steps. Thank you.

#sim2 by Komrhel on 2008-11-19 00:54

The sim2 pc312.0 c60.0123.200 unit is not working. It is related to monitoring, but I am not fully aware of its function.

#sim2 by Senarathne on 2008-11-21 23:35

Looking for repair for sim2 pc312.0 c60.0123.200 monitor. Unit not displaying video. Need assistance urgently.

#sim2 by Gary Dagres on 2008-11-22 06:12

Hello, I'm inquiring about the SIM2 PC312.0 C60.0123.200 monitor. Can this be repaired or should it be replaced? Trying to resolve this asap. Thank you!

#sim2 by bickett on 2008-11-23 03:47

The sim2 pc312.0 c60.0123.100 monitor is experiencing a critical issue affecting the production line. Urgent repair service is needed to restore operations

#sim2 by FETINTZE on 2008-11-24 00:03

Hi there, could you please provide information on repairing a SIM2 PC312.0 C60.0123.200 monitor? It's not working and we urgently need to replace it. Thanks!

#sim2 by mansoor on 2008-11-24 21:44

Sim2 PC312.0 C60.0123.200 monitor issue Drive or board failure. Immediate attention needed.

#sim2 by eni on 2008-11-29 03:23

Please provide information or assistance regarding sim2 pc312.0 c60.0123.100 monitor. Thank you.

#sim2 by navarrette on 2008-11-29 12:47

The SIM2 PC312.0 C60.0123.200 monitor is displaying unusual behavior. The unit is not functioning as expected.

#sim2 by sullentrup on 2008-12-16 22:38

Need someone to fix my SIM2 PC312.0 C60.0123.200 monitor. It's not displaying anything, just a blank screen. Please respond if you can repair this.

#Sim2 by Kumfer on 2011-07-15 19:41

I'm sorry to hear about the issues you're experiencing with your Sim2 PC312.0 C60.0123.100 monitor. Can you please provide details on what the unit is specifically doing or not doing? Additionally, if the estimated replacement cost is high, it might be worth considering repair services to potentiall…...
Show More

#Sim2 by SuzzyJakins on 2019-08-22 23:01

Hello, I see that you're experiencing issues with your SIM2 PC312.0 C60.0123.200 monitor. Can you provide more details about the problem? Is the monitor not turning on, displaying distorted images, flickering, or showing any error messages? This will help us diagnose the issue more accurately. Based…...
Show More

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.