Atlas Copco Service & Repair Forum

WE have two of the Atlas-Copco GA132 compressors onboard for our bulk handling system.One of them has an error code on the Elektronikon control panel, reading: -110200000000 - can you advise what this means or represents?Thank you,Alan Bowie.

— Posted by Gargano on 2022-07-13

Reply🗨️Ask a New Question Below❓

If you need your Atlas Copco unit tested or repaired,
give us a call at 1-336-969-0110.
We offer fair estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 1078 Comments

#Atlas Copco by adam bruce on 2006-02-16 20:42
Provided are to Atlas Copco part numbers I will need quotes or rates to have these items repair. Please provide this aswll as turn around time at your earliest convenience.1900 0701 24 & 1900 0701 06ThanksAdam
➡️ Reply
#Atlas Copco by CÁSSIO CARLOS COSTA on 2006-05-15 17:15
Please, I was in my Elektronikon 1900 0701 24 & 1900 0701 63 the follow event: ERROR OF SYSTEN *200What is this? Regards, Cassio
➡️ Reply
#Atlas Copco by Benjamin Foronda on 2006-07-20 09:16
Kindly share us technical manual of elektronikon part # 1900.0590.73 ed:04
➡️ Reply
#Atlas Copco by Florentino Lagumbay on 2006-08-18 03:08
My client need this replacement part 2pcsAtlascopco Elektonikon, PN 1900 0701 23control type, 24 VACPls email quotation to : porkydouglas@yahoo.com
➡️ Reply
#Atlas Copco by ED HAYWARD on 2006-10-24 20:33
PART# 1900-05-9812 REPAIR PRICE AND TIME FRAME. THANKS ED HAYWARD
➡️ Reply
#Atlas Copco by carlos consani on 2007-02-19 20:09
Please, I was in my Elektronikon part No.1900 0700 08 the follow event: ERROR OF SYSTEM *104What is this?
➡️ Reply
#Atlas Copco by ADESINA AGBOOLA BAYONLE on 2007-06-11 19:55
BEST USED PRODUCT IN NIGERIA MARKET
➡️ Reply
#Atlas Copco by Thanh Dat on 2007-06-22 09:01
We used a compressor type GA 15( Atlas Copco), please sent to me a document of regulator (ELEKTRNOKON). How can I change Italian languge to English languge?
➡️ Reply
#Atlas Copco by Ian Graves on 2007-06-29 07:29
HiCan you help??GA18 - 1998 message is system failure 104 what this mean? and how do we rectify the problem. At 1st error code 11 came up but now just the 104 message is shown.Can you help??RegardsIan
➡️ Reply
#Atlas Copco by ROWLAND HILL on 2007-06-29 12:18
PHONE 614 488-1151I NEED THESE REPAIRED. cAN YOU DO?
➡️ Reply
#Atlas Copco by Oscar Abarca on 2007-07-15 23:06
Can you send me a electronikon manual in pdf file?, i have a problem with a compressor ZT200, I cant operate it in automatic mode and its motor is tripping.ReggardsOscar
➡️ Reply
#Atlas Copco by Depigny Michel on 2007-09-26 08:16
Hi,i have a problem with a compressor Atlas copco GA 90.I need Electronikon documentation in order to determine a problem on the engine and the converter.
➡️ Reply
#Atlas Copco by DEPIGNY Michel on 2007-09-28 08:38
Hi,i have a problem with a compressor Atlas copco GA 90.I need Electronikon documentation in order to determine a problem on the engine and the converter.Best regards
➡️ Reply
#Atlas Copco by Mohammad Tazuddin on 2007-10-20 08:12
dear sir, we have 4 instrument air compressor operating in MCC, No 1 compressor is master control for 3 compressors.we have one problem in atlas copco instrument air compressor no 3 this is not communicating with instrurment air compressor 1 and not sending to DCS also it means all process parameter...
Show More
➡️ Reply
#Atlas Copco by K.MAGESH on 2007-10-26 03:40
Dear Sir,Atlas Copco is an excellent Compressor with inbuilt dryer, but we have a problem in starting up the system as it went to remote control in electronikon controller and since we do not have manual of this compressor with us, we need your assistance to start this compressor and kindly send us ...
Show More
➡️ Reply
#Atlas Copco by Scott Fallon on 2007-12-06 16:06
We have an Atlas Copco GA-75 that is about 12 years old. It has an Electronikon Controller that will not reset. Do you do diagonostics, repairs, replacements, etc.??
➡️ Reply
#Atlas Copco by tarek naga on 2007-12-19 07:16
hiCould you please send a pdf manual copy for GA22 compresor
➡️ Reply
#Atlas Copco by WALID TEBIB on 2008-01-02 18:19
i need documentation of ELECTRONIKON ATLAS COPCO, part nbr 190007007 ED 00
➡️ Reply
#Atlas Copco by WALID TEBIB on 2008-01-02 19:32
i need your help if you have a documentation for ELECTRONICON modulecontrole (ATLAS COPCO) n° SERIE 02993800139 PART 1900070007 ED 00 THANKS
➡️ Reply
#Atlas Copco by Steve Land on 2008-01-18 18:52
I NEED A MANUAL FOR THE CONTROLLER AND COMPRESSOR IF POSSIBLE. Thanks Steve
➡️ Reply
#Atlas Copco by hany sobhy on 2008-01-21 05:34
want know elektronikon ll data sheet and trouble shooting becuse we have this type in our plant power station in aser power station in sodi arabia please sent the files at my email adress and many thx
➡️ Reply
#Atlas Copco by Naeem Mughal on 2008-01-30 11:14
Dear Sir,I have Electronikon controller in one of our Atlas Copco Compressor, now a days we are facing a problem that its one key is not functioning, therefore please quote us the price for the specified controller keypad if you have.Details of controller.Sr. No. 06994100012P. No. 1900 0701 24Best r...
Show More
➡️ Reply
#Atlas Copco by FCO. VILLELA on 2008-01-30 21:41
Hi,i have some problems whit the mastercontrol elektronikon i want to say if you can to send my the users manual
➡️ Reply
#Atlas Copco by Korzhenevskii SerG on 2008-02-01 09:52
Hi, i have a problem with a compressor Atlas Copco ZR 145. I require documentation Electronikon øò order to determine a problem of a soaking up step and the engine of the compressor.
➡️ Reply
#Atlas Copco by Nelson Molina T. on 2008-02-14 16:19
Dear Sr.I Need ELECTRONIKON II technical Manual..Nelson Molina T.BIOFILM S.ATel. 575 6685456Fax. 575 6685473Cartagena -Colombia
➡️ Reply
#Atlas Copco by Manuel Veliz on 2008-02-17 04:25
i need manual electronikon
➡️ Reply
#Atlas Copco by Prahlad Chudasama on 2008-02-20 17:57
This unit functions normal but the display of various temp. is not right.All higher temperatures reads less by 15 to 20 deg.F
➡️ Reply
#Atlas Copco by Ngoni Gunundu on 2008-02-21 07:18
We have an Atlas Copco Elektronikon Systems ES300 central governor which is down. I want to have it repaired so i need your assistance.
➡️ Reply
#Atlas Copco by FRANCISCO SOLIS on 2008-02-21 16:57
is free cost
➡️ Reply
#Atlas Copco by Frank Horna on 2008-02-21 21:47
Please, it can send me a version recent envelope the technical manual of Elektronikon II
➡️ Reply
#Atlas Copco by Frank Horna on 2008-02-21 21:49
Please, it can send me a version recent envelope the technical manual of Elektronikon II
➡️ Reply
#Atlas Copco by Gianni on 2008-02-22 13:45
Very likely send temperature sensor failure
➡️ Reply
#Atlas Copco by Gianni on 2008-02-22 14:01
the number of module is not correct,or obsolete,pleas seriel number compressor,only this I can help yuo!I have a connect whith atlas copco
➡️ Reply
#Atlas Copco by GIANNI on 2008-02-22 14:26
this error 200,is at error internal,Unfortunately failures are not solvable,Can \'work for months, how can\' failure immediately,Resolves with the replacement of regulatorby
➡️ Reply
#Atlas Copco by Khayatjafari.Hossein on 2008-02-24 09:50
Dear Sir/Madamwe have two compressor that was used two controller.the name of this controller is EELECTRONIKCON and we need tho manual for upload this parameter.thank you
➡️ Reply
#Atlas Copco by Khayatjafari.Hossein on 2008-02-24 09:52
Dear Sir/Madamwe have two compressor that was used two controller.the name of this controller is EELECTRONIKCON and we need tho manual for upload this parameter.thank you
➡️ Reply
#Atlas Copco by Khayatjafari.Hossein on 2008-02-24 09:52
Dear Sir/Madamwe have two compressor that was used two controller.the name of this controller is EELECTRONIKCON and we need tho manual for upload this parameter.thank you
➡️ Reply
#Atlas Copco by ARCHAMBAUD on 2008-02-29 15:04
Hi, I\'m a student in training period. I\'m looking for an electronikon 2 datasheet because I want supervize the compressor. I want to know if it\'s possible to pilot the machine by an electromechanical contactor. Is it possible to pilot electronikon 2 by analogic output automation and erase pressur...
Show More
➡️ Reply
#Atlas Copco by S. BALAJI on 2008-03-07 06:30
Dear sir , Kindly arrange us to send the quote for elektronikon -2Thanks & regards S. Balaji
➡️ Reply
#Atlas Copco by Lukito on 2008-03-10 09:48
I Have compressor Atlas Copco with elektronikon 1900 0701 03can\'t operated and display only number 1002000000What is this, and why solve this problem?Note, I have 3 control compressor in same error.Thank you for your attention, and wait your answer.
➡️ Reply
#Atlas Copco by nandakumar on 2008-03-12 03:13
Sir could you please provide us a fault finding manual for Electronikon Regulator Model # 1900070008 which is fitted with Atlas copco compressor GA 37.The display showing SYSTEM ERROR and 10000000000 160i don\'t know what to dothanks and regardsnanda
➡️ Reply
#Atlas Copco by hieu le minh on 2008-03-12 12:35
I want to control elektronikon panel of air compressor model ZT110.Could you tell me how I can get user manual elektronikon regulator.Pls, feedback to me as soon as.Thanks and best regards.Hieu Le MinhBritish American Tobacco- Vinataba (JV) Ltd.,Vietnam
➡️ Reply
#Atlas Copco by Dino Dumangas on 2008-03-12 15:05
I need an english version for the Electronikon Control System.Thanks
➡️ Reply
#Atlas Copco by b_alaki on 2008-03-23 06:09
hiwe have 4 atlas copco ga7-10 our in our site and we need compressor and compressor controller (elektronikon cst584) user manual and if it possible the controller schematic diagramthanks with the best regards
➡️ Reply
#Atlas Copco by michael john noche on 2008-03-27 05:34
the company that i work,had a atlas copco compressor.my question is the display cannot operate.you cannot also use the buttons in dispaly,while the only alarm is element outlet.so what is the remedy for that trouble?
➡️ Reply
#Atlas Copco by Mohamed Hamdi on 2008-03-30 18:45
I need Elektronikon control system Manual for GA30-8 very important Model 2000Thank you
➡️ Reply
#Atlas Copco by Morris Bujarski on 2008-04-02 20:46
We have a Atlas Copco GA 18 FF w/ Elektronikon ll control. But we have no manual for the Elektronikon control. Could I get this on pdf file?
➡️ Reply
#Atlas Copco by Robert Mendes on 2008-04-03 14:20
I need to fix a model vlase-020t velconic, I would like to know if some tecnica documentation exists and if you can supply this aid to me, you are in Brazil and I do not make use of much tecnica assistance for this equipment
➡️ Reply
#Atlas Copco by Nia Kurniati on 2008-04-06 02:36
How can I found user\'s manual for elektronikon control modul type ES 100
➡️ Reply
#Atlas Copco by JORGE ARTURO on 2008-04-08 17:21
I NEED DIAGRAM OF CONECTION OF ELEKTRONIKON WHIT NUMBER PART 1900 0710 32, PLEASE HELP ME.
➡️ Reply
#Atlas Copco by a on 2008-04-08 19:10
servomotor manual
➡️ Reply
#Atlas Copco by semnensurce on 2008-04-15 01:06
Hay take prefer to commiserate with with BBcode :( for me does not refashion out to beget references to the gripping pictures and video on the topic. Or heave up b abandon down affiliation on this topic
➡️ Reply
#Atlas Copco by Robert Ward on 2008-04-16 14:35
In need of a user manual for Electronikon model 190-0701-02.
➡️ Reply
#Atlas Copco by Robert Ward on 2008-04-16 14:37
In need of a user manual for Electronikon model 190-0701-02.
➡️ Reply
#Atlas Copco by sarwar alam on 2008-04-22 05:31
we are using in our plant and founnd good duty comp. but some times its coming compressor off while after un louding programe & motor should stopped only .
➡️ Reply
#Atlas Copco by Raul L. Virtudaqzo on 2008-04-26 06:36
Dear Sir, I need the connection diagram of our compressor model ZR110. Thank you so much and more power in your company.
➡️ Reply
#Atlas Copco by Andrew Wright on 2008-04-30 20:31
I am looking for the error code explanation for the above unit.
➡️ Reply
#Atlas Copco by ashwin sami on 2008-04-30 23:41
GA 18 P COMPRESSOR SERIAL NO. 000058128Need the both tranformer part number to replaces with faulty one
➡️ Reply
#Atlas Copco by DIMITRIS ZAOURIS on 2008-05-08 09:05
Dear sirWe are a food industry in Greece and we have two ATLAS COPCO GA115air compressors and i have a problem with the keyboard of the one unit.The electronikon screen works but when i want to change parameters the push buttons not work.I think that i need only the front keyboard.Can you provide th...
Show More
➡️ Reply
#Atlas Copco by Ionescu Lucian on 2008-05-18 06:20
I wont to repair atlas copco compresor
➡️ Reply
#Atlas Copco by L.Akle on 2008-05-27 16:28
I need to repair an Electronikon II module Installed on an Atlas Copco GA45VSD Unit.The main symptom is that a relay output that controls the Element Cooling Fan, described as K01, does not come in. The rest of the program operates fine. We had to put on the Fan contactor ON directly, by-passing the...
Show More
➡️ Reply
#Atlas Copco by musa batari on 2008-06-02 16:28
we have twoof this type of compressor in my section for bag filters, resently we had a problem of the display unit went off completly. we try to trace the problem but is difficult becouse the circuit diagram was too tiny to read. pls. can you send a pdf copy to me so that it will help to trace any p...
Show More
➡️ Reply
#Atlas Copco by Mario Machado on 2008-06-02 21:56
Dear Sr.I Need ELECTRONIKON technical Manual..P/N: 1900 0700 08 ed: 01serial: 02024700083Mário
➡️ Reply
#Atlas Copco by Richard Browne on 2008-06-06 11:31
Hi,Please send an Operations Manual for the Elektronikon II controller, which is fitted to our GA11-VSD P-10 Compressor.This is a requirement for us in complying with iso standards.Many thanks,Richard BrowneIQE Silicon Compounds Ltd.
➡️ Reply
#Atlas Copco by alberto antonio martinez romero on 2008-06-07 18:31
Tenemos Un compresor Ga 110 se daño el control electronikon necesitamos el manual para ver si lo podemos reparar mientras solicitamos uno nuevourgente
➡️ Reply
#Atlas Copco by David Long on 2008-06-13 05:55
I require a user manual for a Elektronikon 11 controllerI have a fault coming the screen reads emer stop closeshd openCan you please send me a manual or any info this contoller is in a GA7 unit
➡️ Reply
#Atlas Copco by Juan Reinoso on 2008-06-16 17:06
Hello, we have a ATLAS COPCO with the ELEKTRONIKON control, I´m getting a message from it that says: SYSTEM FAILURE 200Could you give me a hint of what the problem coud be, we already checked the electronic cards, and put new relays on them but no luck.Also please let me know if you can repair the c...
Show More
➡️ Reply
#Atlas Copco by tae yong jung on 2008-06-26 10:45
thank you
➡️ Reply
#Atlas Copco by Abdul Hafeez on 2008-06-26 16:16
Replace fan thermal switch.... i think problem is not in the module but it is in the thermal switch only... rgds. A H S
➡️ Reply
#Atlas Copco by Abdul Hafeez on 2008-06-26 16:23
if any one problem with screw compressor of any brand.... please do not hesitate to contact us.... regards A H S
➡️ Reply
#Atlas Copco by p.srinivasu on 2008-06-30 14:51
power off with out any triping
➡️ Reply
#Atlas Copco by len wargin on 2008-06-30 18:20
Any update on the re-repair of our Elektronikon control module?
➡️ Reply
#Atlas Copco by MAHMOUD ODEH on 2008-07-01 11:12
manual for elektronikon I (new generation )
➡️ Reply
#Atlas Copco by Amjad ali on 2008-07-03 06:58
Dear sir/madam,kindly send me instruction manual and software of elektronikon regulator, Sr,#05004600189, part#1900 0701 05, supply voltage 24vac.Thanks & best regardsAwaiting your faverable replyAmjad AliProgressive ElectronicsFaisalabad (Pakistan)
➡️ Reply
#Atlas Copco by m.k on 2008-07-08 08:22
realy i need itgood
➡️ Reply
#Atlas Copco by Basim Ghanim Taha on 2008-07-09 07:11
Dear Atlas copcoGood DayI have two compressors and want to made change over in between theme for every 24 hours automatically.Please send to me technical manuals for how to configure Elctronikon for Star/Stop the compressor automatically and what mean of:- Pressure Band 1- Pressure Band 2- How to op...
Show More
➡️ Reply
#Atlas Copco by Basim Ghanim Taha on 2008-07-09 07:19
Dear Atlas copcoGood DayI have two compressors ZR-160 and want to made change over in between theme for every 24 hours automatically.Please send to me technical manuals for how to configure Elctronikon for Star/Stop the compressor automatically and what mean of:- Pressure Band 1- Pressure Band 2- Ho...
Show More
➡️ Reply
#Atlas Copco by Binh Thai on 2008-07-12 08:15
I had a old Alascopco but I can`t used the machine Please give me a catalog Thank!
➡️ Reply
#Atlas Copco by Azhar on 2008-07-14 07:45
Can i get manual for Atlas Copco GA37
➡️ Reply
#Atlas Copco by YOMBOT JEAN on 2008-07-15 08:20
JE VOUDRAIT AVOIR AMPLE INFORMATIONS SUR LES ELECTRONIKONS. NOUS AVONS UN PARK DE 18 ELECTRONIKON SUR NOTRE SITE.24VOLT AC/26 RELAY OUTPUTS: 250Vac PART Nr: 1900 0701 06.
➡️ Reply
#Atlas Copco by Muhammad Antum on 2008-07-22 08:10
please provide download manual
➡️ Reply
#Atlas Copco by Ing. Omar Martinez on 2008-07-24 00:47
A quien correnda Les solicito asesoria para arrancar un compressor ATLAS COPCO modelo GA75W al control le falta un elemento llamado control a distancia como le puedo hacer para arrancarlo manualmente. Gracias
➡️ Reply
#Atlas Copco by dasun on 2008-08-01 08:36
Electronikon 1 user manual is required
➡️ Reply
#Atlas Copco by Md. Badiur Rahman on 2008-08-11 03:44
Very Good
➡️ Reply
#Atlas Copco by Suphachai Loprasan on 2008-08-16 08:36
Daer SirI need to the Electrical manual of Elektronikon P/N:1900 0700 05Plaess give me.
➡️ Reply
#Atlas Copco by Mr. N. M. Bhave on 2008-08-26 09:13
Dear Sir/ Madam,We are in need of above refer documents for Controller used in ATLAS COPCO Make GA22- AEL - II FF Model Compressor.The Controller has Part Nr. 1900 0710 12Can you provide the same?RegardsNMB
➡️ Reply
#Atlas Copco by IONESCU RAZVAN on 2008-08-26 11:46
I work in factory ARCTIC in Romania..and we has the air compresor ATLAS COPCO ...and we has problem with controler ELEKTRONIKON...The analogic input work good..but don\'t work the digital input in the controler......for ex. if i push emergency stop button red led don\'t light...and we don\'t see mes...
Show More
➡️ Reply
#Atlas Copco by Cristian David Bendik on 2008-08-27 12:57
Can you send me a electronikon manual in pdf file?, i have a problem with a compressor GA90-160, This starts without reaching the value of cargo .ReggardsCristian
➡️ Reply
#Atlas Copco by Mamo Boykie on 2008-09-02 10:53
Got stationery comprssor from Atlas Copco SA
➡️ Reply
#Atlas Copco by lm on 2008-09-07 11:57
thank you
➡️ Reply
#Atlas Copco by galal saif on 2008-09-08 12:00
WE ASK ABOUT THE SOFTWARE WHICH USED TO DEAL WITH THE ABOVE UNIT ELECTROKON AND WE ALSO ASK ABOUT ITS MANUAL
➡️ Reply
#Atlas Copco by ibrahim abdel salam on 2008-09-10 00:36
manual and offer to get repaired or new panel
➡️ Reply
#Atlas Copco by Pat Twomey on 2008-09-12 15:04
I am looking for the wiring diagram for the control circuit of the Atlas Copco ZT 22 Compressor please.
➡️ Reply
#Atlas Copco by elvis gonzalez on 2008-09-12 18:52
I need the technical manual of elektronikon II
➡️ Reply
#Atlas Copco by Engineer Akram Sadiq on 2008-09-13 19:52
i have a large measurement offset in the reading of the delivery air pressure transducer . can I Adjust it ?? . I can not see any screw or way to adjust this offset in the transducer .
➡️ Reply
#Atlas Copco by keivan sadshokr on 2008-09-14 10:16
dear sir ,we 3 atlascopco screw compressor .we need to connect them to gether for auto changing in shuting down of each of them. how we can do it and with kind of wiring we can do it?and another question , one of our plcs has damaged but we have not spare part, its s/n:3100518088-p/n:1900071031.can ...
Show More
➡️ Reply
#Atlas Copco by mohammed ibrahim on 2008-09-17 09:50
i have a compressoe with atlas copcoand their elektronikon system showing failure with code 106
➡️ Reply
#Atlas Copco by CASSIANO DA SILVA OLIVEIRA on 2008-09-17 16:03
Download Manual Atlas Copco GA55 Elektronikon II .
➡️ Reply
#Atlas Copco by Cassiano on 2008-09-18 02:18
I am needing the manual of compressor GA 55 FF MK4 (Eletronikon II)
➡️ Reply
#Atlas Copco by joaquín losada on 2008-09-18 12:27
tengo un compresor de segunda mano sin manual y necesito programar el sistema
➡️ Reply
#Atlas Copco by YACINE on 2008-09-19 23:23
NEED HELPE FROM YOU TO READ DOCUMENTATION OF ELEKTRONIKON II OF GA45 THANKS
➡️ Reply
#Atlas Copco by Dante Linares on 2008-09-21 20:36
Dear Sr.I Need ELECTRONIKON II technical Manual..Dante LinaresC. M. AntaminaTelef 1 51 2173647AncashPeru
➡️ Reply
#Atlas Copco by Marcos Bartoloni on 2008-09-29 18:52
Good afternoon people. I need a PDF copy of the elektronicon 1900 0700 03 control module, because we have an error that its shown on the display, and we want to start and investigation of it, but we need the information about the control module. Reggards Marcos Bartoloni EDELCA, VENEZUELA
➡️ Reply
#Atlas Copco by þþþþþþ on 2008-09-30 12:54
user manuel GA 132
➡️ Reply
#Atlas Copco by Chookeat T. on 2008-10-01 10:55
Dear Sr.I Need ELECTRONIKON II technical Manual.Best regards,Chookeat T.choo_oh@hotmail.com
➡️ Reply
#Atlas Copco by M.V.Vinodan on 2008-10-02 07:35
Iam working in alico aluminium and light industries company.When I main power On; in the controller appearing 1003000000 this number.Our compressor not wrking .Pls give me the remedy.Serial nr. 0501700033Part nr. 1900 0701 05
➡️ Reply
#Atlas Copco by ismael on 2008-10-03 14:46
ìm on the same situation. Would you mind to send me the manual of electronikon I
➡️ Reply
#Atlas Copco by Behzad Akbari on 2008-10-05 12:44
Hi,I\'ve lost the Elektronikon Atlas Copco manual.
➡️ Reply
#Atlas Copco by Hamdi on 2008-10-08 08:17
Dear Sir,Can you give me the manual for elektronikon ?I need to looking for the password for set the range sensor. Because my compressor cannot start because it.please help meBest RegardsHamdi Ayussa
➡️ Reply
#Atlas Copco by Hamdi Ayussa on 2008-10-09 07:54
Dear Sir,Can you help me ? I need the instruction for elektronikon cause I get some problem for start my comperessor. The type of my compressor is GA 160.Trims for your attentionBest RegardsHamdi
➡️ Reply
#Atlas Copco by Roy Cheeseman on 2008-10-14 19:18
Could you tell me how I can get user manual elektronikon regulator serial number is 06080400009. For an Atlas Copco air compressor model ZE55-2.0.Our compressor is shutting down with no trouble code; we check all of our ends and found nothing. We had Atlas Copco Tec come out and found nothing, they ...
Show More
➡️ Reply
#Atlas Copco by duong on 2008-10-16 17:04
DATASHEET GA22
➡️ Reply
#Atlas Copco by Kip Bauer on 2008-10-16 17:07
I have a compressor with the electronikon II on it And having problems with the compressor tripping main breaker. Almost 100% positive about when it does it. happens after unload motor stops then when it restarts motor, it trips breaker, But not all the time. Not sure if control is starting motor un...
Show More
➡️ Reply
#Atlas Copco by Torbjörn Liljegren on 2008-10-17 06:54
send a GA22 manualKind regardsTorbjörn Liljegren1st EngineerM/T Evinco
➡️ Reply
#Atlas Copco by GAURAV GUPTA on 2008-10-23 04:58
I work in Jindal Stainless Limited in India..and we has the air compresor ATLAS COPCO( model no-ZR275)...and we has problem with controler ELEKTRONIKON...We are not receiving any display on the regulator inspite of giving a regular 24V supply and its interfacing with SI/O module.Please also send the...
Show More
➡️ Reply
#Atlas Copco by P.NITHIYANANDAN on 2008-10-24 05:58
Kindly send the manuals related to this system
➡️ Reply
#Atlas Copco by Dicky Lubis on 2008-10-24 07:12
Dear Sr.I Need ELECTRONIKON II technical Manual..Dicky LubisPolychemMobile : +6281573170645Jakarta -Indonesia
➡️ Reply
#Atlas Copco by P.NITHIYANANDAN on 2008-10-25 06:57
Dear Sir, Kindly send user manual of Electronikon User manual.Thank you,
➡️ Reply
#Atlas Copco by pham anh tuan on 2008-10-27 13:30
Dear sir,At Present I have one atlascopco GA7 we had the problem with operation the machineCould you provide me the operation manual to solve this problemthanks & RegardsTuan
➡️ Reply
#Atlas Copco by Muhammad Sadiq on 2008-10-28 10:20
Dear Sir,Kindly Sand Atlas Copco Compressors model no GA7 Maintenance Manual for Spair Parts indenting purpose etc.My Plant name is Riyadh Cement & co.thanks.
➡️ Reply
#Atlas Copco by Dicky Lubis on 2008-11-06 06:27
Dear Sir,Thank you very much if I can get the manual Book off Electronikon II English version.Bsrgd,Dicky
➡️ Reply
#Atlas Copco by arnaldo leite on 2008-11-06 15:06
I need manual elektronikon 1900 0701 23. If you have, send to me please.thank you. arnaldo
➡️ Reply
#Atlas Copco by Manuel Veliz on 2008-11-07 03:24
ineed help about of comunication between elektronikon and SST CLX PB
➡️ Reply
#Atlas Copco by Payet on 2008-11-07 07:01
Nous avons acheté 4 modules Elektronikon 2 chez Atlas Copcopour remplacer les modules (plus fabriqués) sur nos compresseurs Atlas Copco GA55.Nous n\'avons pas reçu de notice (paramètrages, mainteneance, progammation etc......) sur ces Kits de remplacements à part le schemade cablagePouvez-vous nous ...
Show More
➡️ Reply
#Atlas Copco by Pedro Aparicio Arias on 2008-11-17 18:49
ELECTRONIKON technical Manual..-------------------------------------------------------------------------------- Posted by Pedro Aparicio on Sunday, November 17 2008Dear Sr.I Need ELECTRONIKON II technical Manual..Pedro AparicioCoats Cadena S.A.Phone: (511) 612-6200 Ext.: 450LimaPeru
➡️ Reply
#Atlas Copco by Francisco Saavedra on 2008-11-18 14:50
Necesito manual controlador Elektronikon II.Identigficación de terminales de entrada y salida
➡️ Reply
#Atlas Copco by derrick mwape on 2008-11-18 23:50
Send me user manual for the above control and protection unit which also has fault diagnostics.
➡️ Reply
#Atlas Copco by derrick mwape on 2008-11-18 23:54
I\'m looking for the error code for the above unit
➡️ Reply
#Atlas Copco by Watson Sawadye on 2008-11-20 05:15
I would like to tap a signal from the Electronika module and connect it to the PLC as well as SCADA.I need to know where to do it and how that can be acieved.So would it be possible to get a copy of the Electronika II Technical manual?
➡️ Reply
#Atlas Copco by Adolfo Omaña Garza on 2008-11-21 16:39
o GA18 air system manual
➡️ Reply
#Atlas Copco by jorge castillo on 2008-11-21 20:41
Favor enviar informacion para evaluacion y reparacion del elektronikon mastercontrol module repair.Gracias Jorge castillo
➡️ Reply
#Atlas Copco by N T SIVA PANDIAN on 2008-11-24 12:35
Sir,We are in need of ATLAS COPCO\'s ELEKTRONIKON II Part No: 1900 0710 02 connection wiring diagram. If you have it, kindly send us.Our Contact Details:LAKSHMI DEVICES41-H, Jeswant Nagar,Reddypalayam Road,Mugappair West,ChennaiPIN: 600 037INDIAPH: 91-44-64546677
➡️ Reply
#Atlas Copco by collins kawanga on 2008-11-25 08:38
may you send me the operating/user manual for ELEKTRONIKON FOR GA 250 FF
➡️ Reply
#Atlas Copco by Miros³aw Drabczyk on 2008-11-26 00:16
NEED HELPE FROM YOU TO SCHEMATIC WIRING DIAGRAMS FOR ATLAS COPCO GX7 MIREK
➡️ Reply
#Atlas Copco by Victor Ackuayi on 2008-11-28 13:37
Dear Sir/Mad;We have here on our Siguiri Gold Mine in Guinea; a satellite gold mine of AngloGold Ashanti Company, a couple of your GA22 compressors for air delivery to our plant equipment.We are experiencing few problems of late and I would need a User Manual to facilitate trouble shooting.I would b...
Show More
➡️ Reply
#Atlas Copco by bachri on 2008-12-05 03:34
dear,siri need user manual
➡️ Reply
#Atlas Copco by phanhuutong on 2008-12-10 05:17
thank very much
➡️ Reply
#Atlas Copco by michael mixon on 2008-12-15 18:52
via email as a pdf file thank you so much for your help
➡️ Reply
#Atlas Copco by Wagiman on 2008-12-31 09:00
Please send me user manual Module for Screw Air Compressor GA 37
➡️ Reply
#Atlas Copco by dave Urwin on 2009-01-03 10:04
Dear Sr.I Need ELECTRONIKON II technical Manual..
➡️ Reply
#Atlas Copco by DAMBO WALSON on 2009-01-07 16:58
SIR.THE ELECTRONIKON ON OUR GR-132 COMPRESSOR DOES NOT RESPOND TO COMMANDS. PRESSIND THE FUNCTION KEYS , NO RESPONSE COMES ON. ALL WE SEE IS THE GENERAL ALARM THAT IS PERMANENTLY ON . EVEN WHEN THE FIELD DEVICES WERE DISCONNECTED THE ALARM REMAINED AND SUCH NOTING FOR NOW COULD BE DONE. WE NEED A TE...
Show More
➡️ Reply
#Atlas Copco by DAMBO WALSON on 2009-01-07 17:09
Sir.Could you please send me the user manual for electronikon in digital format.RegardsDambo Walson
➡️ Reply
#Atlas Copco by INGMAR JOSE BELLOTT ALANDIA on 2009-01-12 17:43
Hola, tengo problemas con encontrar el origen del problema que presenta un compresor Atlas Copco GA-45, el cual no enciende ni apaga, identificando el siguiente aviso en la pantalla del ELEKTRONIKON #1900-07-00-07: \"FALLA DEL SISTEMA 104\", motivo por el cual solicto su colaboración a enc...
Show More
➡️ Reply
#Atlas Copco by Amgad Fayek on 2009-01-14 06:22
Need for spare part manual for GA11 1999
➡️ Reply
#Atlas Copco by kamal on 2009-01-17 08:07
we have one compressor model gx7. we want part list & manual for above compressor
➡️ Reply
#Atlas Copco by Ravinder Sharma on 2009-01-19 21:00
Dear Sir,can you please provide me the manual of electronikon.RegardsRavinder
➡️ Reply
#Atlas Copco by Muhammad Imran on 2009-01-21 08:31
Controller display 110200000000 message Need manual & programming procedure about Elektronikon controllerPart # 100070124
➡️ Reply
#Atlas Copco by Djamel on 2009-01-22 16:56
dear sir;in our site we have ATLAS COPCO ZT90 compressors with an ELEKTRONIKON regulator, one of them has a reppetitif shut down by \" SYSTEM FAULT\" with a code of th error, somtimes with \" 111101000 106\" code, and somtimes with \" 200 \" code.we haven\'t any documen...
Show More
➡️ Reply
#Atlas Copco by asru kumar on 2009-01-28 10:13
Dear Sir,I am kumar, as m.m in samee, we have by a new air compressor Z45 and FD 150 air dreyer from belgiam-2007, now i lost user manul so i requesting please send usser manualthanksASRUKUMAR.
➡️ Reply
#Atlas Copco by M.IMAN on 2009-01-29 05:10
1. one controller showing 110200000000 and hwriting error in programming2. Another unit Showing 444400000000 and not programmingplease suggest the solution & Problem
➡️ Reply
#Atlas Copco by yahya asy on 2009-02-02 14:05
please i need service manual for Elektronikon II
➡️ Reply
#Atlas Copco by maintenance on 2009-02-02 14:22
manuel elktronikon pour ga45 atlas copcocomment cabler une commande externe
➡️ Reply
#Atlas Copco by maintenance on 2009-02-02 14:24
atlas copco ga45 serie all316282nous essayons de cabler une commande externe au local compresseur
➡️ Reply
#Atlas Copco by Vishal Sharma on 2009-02-08 19:57
Can you please provide me the details for Atlas Copco AC-3 250HP Elektronikon model its capacity and pressure ,Actually at one of my side already having this planning to prchase 2 more
➡️ Reply
#Atlas Copco by THAMER POLINTAN on 2009-02-11 12:46
dear freindi have an air compressure model GA55 +9.1 bar during sumer the ambeant tempreture will be 46C and am geting always the out let tempreture between 90 to 115C so please let me know is this safe for my machine or i shall do some thingthanksregards
➡️ Reply
#Atlas Copco by mazouari jaouad on 2009-02-15 12:06
Cher Monsieur;Dans le cadre d\'un besoin trés urgent de notre service des régulateurs cités en réference, nous vous demandons de nous envoyer le manuel technique de ces régulateurs afin qu\'on puisse établir une commande.merci de votre collaboration.N.B : affaire urgente
➡️ Reply
#Atlas Copco by janusz on 2009-02-16 11:51
We have 2 compressores (manufactured by Atlas Copco) with model of engine XAS 175 and XAS 175N. This compressores are about 10 years. Where I can find user manual?
➡️ Reply
#Atlas Copco by janusz on 2009-02-16 11:53
We have 2 compressores (manufactured by Atlas Copco) with model of engine XAS 175 and XAS 175N. This compressores are about 10 years. Where I can find user manual?
➡️ Reply
#Atlas Copco by Petrica Stancu on 2009-02-16 13:28
Hi,Is it possible to have communication between ES100 and a Siemens CPU PLC through Profibus or TCP/IP ?Many thanks in advance
➡️ Reply
#Atlas Copco by IBRAHIM NAGI on 2009-02-20 13:14
Manual For Atlas Copco GA55 Requesed
➡️ Reply
#Atlas Copco by ALBADAR ENGINEERING COMPANY on 2009-02-23 04:03
GA75 AIR COMPRESSOR ELECTRON MANTENANCE MANUAL
➡️ Reply
#Atlas Copco by ALBADAR ENGINEERING COMPANY on 2009-02-23 04:06
GA75 AIR COMPRESSOR ELECTRON MANTENANCE MANUAL COTACT NO 03224109932
➡️ Reply
#Atlas Copco by zhao on 2009-02-23 06:42
Elektonikon user manual
➡️ Reply
#Atlas Copco by zhao on 2009-02-23 06:59
User Manual
➡️ Reply
#Atlas Copco by perez espindola francisco on 2009-02-24 17:02
repaired S-AII-236704
➡️ Reply
#Atlas Copco by Antonio Fontão on 2009-02-26 12:21
Good morning!I need manual book Electronikon II in pdf file.Thanks.Antonio
➡️ Reply
#Atlas Copco by Ron on 2009-02-26 17:30
What manuals do you need, I have smoe manual that came with the machine. What errors do you have?
➡️ Reply
#Atlas Copco by elvis gonzalez on 2009-03-02 21:11
I need user manual elektronikon 1
➡️ Reply
#Atlas Copco by Pablo Vega on 2009-03-06 14:29
can you give me a link to access the website in where I can downloadthe User Manual of the ELEKTRONIKON controller in pdf?, please, thanks
➡️ Reply
#Atlas Copco by mark luedee on 2009-03-06 21:53
need electronikon II manual
➡️ Reply
#Atlas Copco by Shree kumar jha on 2009-03-08 07:05
Dear Sir,Now, This is time to get new bussines oppertunity of india because india is also big market in Automation and p.l.c. works, more maltynational company at hear and more are comeing So, I capable to repair micromaster drive and electonikon compressor controler i was alredy repair this control...
Show More
➡️ Reply
#Atlas Copco by andy marr on 2009-03-08 13:23
I would be greatly obliged if you could provide an Electronikon User Manual.RegardsAndy Marr
➡️ Reply
#Atlas Copco by Gul bahar Shah on 2009-03-09 18:32
Dear sir /madam we have need trouble shooting guide .
➡️ Reply
#Atlas Copco by Gul bahar Shah on 2009-03-09 18:50
Dear Sir,Please send us manual above said subject for spare parts ordering .This compressor is used for oxygen process and oxygen used for patient areas. we have also GA 15 installed for some used.Thanks & regards
➡️ Reply
#Atlas Copco by selastin on 2009-03-10 18:56
PLS SEND MANUAL OF GA22 (GA22 compresor)ATLOCOPER
➡️ Reply
#Atlas Copco by Paul Gunkel on 2009-03-13 15:59
I have a newer GA 55 plus compressor and lost my CD that explains evry thing about the compressor and was wondering if I could by another one?
➡️ Reply
#Atlas Copco by nagarajan.g on 2009-03-20 10:35
schematic diagram of ga30
➡️ Reply
#Atlas Copco by Sohail on 2009-03-24 07:35
Please be infomed that we are using mentioned subject equipment on our site in Jeedha saudi arebia. But last week suddnly compressure is stop. then up to now not started, i try to with some local repair workshop they advising to change ECM. But i already check ECM is working.Please AdviceUr early re...
Show More
➡️ Reply
#Atlas Copco by asd on 2009-03-27 14:09
hello ...i need prouser to commnecation between atlas copco..comproser and pc .thank you
➡️ Reply
#Atlas Copco by Pandaya on 2009-03-29 07:14
Dear sirwe need operating instruction for air compresor atlas copco GA75type 1900-0581-05LD4 (Display using seven segmen)Thank you very muchregardpandaya
➡️ Reply
#Atlas Copco by Ahmad Omidi on 2009-03-29 13:03
Dear Sirs,I need technical manual(s) of Elektronikon P/N:1900070122 or 1900070125.Thanks for your attention
➡️ Reply
#Atlas Copco by tor on 2009-04-04 03:42
We need the Atlas copco Pass Word to Reboot the ECU Electronic System on the GA37( forgot pass word)
➡️ Reply
#Atlas Copco by haythem on 2009-04-08 09:13
hello;the compresseor GA11ff show me a message warning the dryer lat not normal but i\'m doesn\'t know this error. Please can you help me .thanks.
➡️ Reply
#Atlas Copco by MASSINISSA on 2009-04-14 16:01
I need if it\'s possible the manual of ELEKTRONIKON II
➡️ Reply
#Atlas Copco by utomo on 2009-04-16 04:00
Pls send to me, manual repair for compresso Atlas Copco ga55thanks
➡️ Reply
#Atlas Copco by Nasrunnizam Bin Nasruddin on 2009-04-16 09:56
We facing problem with Elektonikon II Intellisys control board ( P/N : 1900 071001) Atlas Copco Air Compresssor ( GA37 ) . The problem is we can not reset the alarm of emergency . We have tried to sent for repair but unfortunely they unable to repair.Can you advise us?
➡️ Reply
#Atlas Copco by aobakwe tsheole on 2009-04-18 21:48
please send me troubleshooting manual.
➡️ Reply
#Atlas Copco by azadeh on 2009-04-20 11:37
plise sent to me catalog for circuit of electronikion to my email.tanks for you .
➡️ Reply
#Atlas Copco by Derrick Taylor on 2009-04-21 03:45
Compressor is down and we do not have a manual for the Controller
➡️ Reply
#Atlas Copco by Noor Khan on 2009-04-24 00:32
Please send me electronikon 1 manual and connection digrame.
➡️ Reply
#Atlas Copco by suren on 2009-05-03 12:03
atlas copco is a good product
➡️ Reply
#Atlas Copco by Roopnarine Jaikishun on 2009-05-03 16:34
hi i am asking u if u could please send me a copy of the operation and trouble shooting manual for the GA75 compressor (100 Hp).thank you.
➡️ Reply
#Atlas Copco by Yaselamat Gea on 2009-05-06 03:54
Dear Sir/MadamPlease sent to us Technical manual for Electrikon II.RegardsYaselamat GeaBatam- Indonesia
➡️ Reply
#Atlas Copco by tran hoang dung on 2009-05-07 10:21
Dear Sir/MadamI Want to know the cost of Electronikon regulator ( 1900 0710 31) and where can I play an order shortly. Best regards
➡️ Reply
#Atlas Copco by Hassan on 2009-05-11 12:14
Dear Sir,I have Atlas Copco : Compressor GA30 VSDInverter Siemens : 6SE7027-2ED61-ZController Atlas Copco: 1900 0701 82Compressor Controller Atlas Copco:1900 0701 06I had problem in inverter, the Siemens maintenance was solved it.My problem is: How to set communication panel with control? And data f...
Show More
➡️ Reply
#Atlas Copco by ali oukhbou on 2009-05-12 17:17
je voulais les schemas electroniques de elektronikon
➡️ Reply
#Atlas Copco by ali oukhbou on 2009-05-12 17:36
je voulais des montages de elektronikon
➡️ Reply
#Atlas Copco by jose on 2009-05-14 21:19
i need munual for ga75
➡️ Reply
#Atlas Copco by Wilson Horta on 2009-05-15 00:36
There is a GA 30P; Serial Number AP1591825; Manufactured 2007, ATLAS COPCO AIRPOWER - Belgium. We need the electric drawings and ELEKTRINIKON II TECHINICAL AND USER MANUAL
➡️ Reply
#Atlas Copco by NEMICHE on 2009-05-17 17:18
Dear sir;We have 05 elektronikon regulator in our site installed on Atlas copco Compressor and we have some problems on sequences configuration changing the start up priorities 1,3,2,number 4 compressor we want to change this priority as follow 1,4,3 and 2We don\'t have the acces to the software for...
Show More
➡️ Reply
#Atlas Copco by Andor Sihotang on 2009-05-19 09:53
Dear Sir or Madame,Please send to us the Parameter for GA7 of Atlas Copco Screw Compressor,Best regardsAndor Sihotang
➡️ Reply
#Atlas Copco by Omar THIAM on 2009-05-20 14:23
Bonjournous avons deux compresseur Atlas COPCO ZT45 et ZT22 dans notre usine de production de boisson Coca Cola. je suis le Utilities Manager et depuis mon arrivée j\'ai aucune documentation sur le module de commande Elektronikon et le manuel de maintenance.merci de nous envoyer en PDF si possible c...
Show More
➡️ Reply
#Atlas Copco by Corey P Buer on 2009-05-21 19:29
Please send us a repair manual for a GAU15 this will help us in ordering parts Thank you Corey P Buer
➡️ Reply
#Atlas Copco by Maximo D. Otadoy, Jr. on 2009-05-26 02:21
Recently the Elektronikon Controller of our GA 37 Atlas Copco Air Compressor indicated \"Total Systems Failure\". Attempts by local Atlas Copco personnel to redownload program files were not succesful. Can this controller be repaired by you? If Yes, can this be loaded with program so that ...
Show More
➡️ Reply
#Atlas Copco by iulian on 2009-05-26 11:03
Hello! I need your help! I need user manual and messages errors for elektronikon 11! Thank you very much!
➡️ Reply
#Atlas Copco by JOSE VENTURA on 2009-06-01 15:48
guide steps to find the working hours for compressor in ELECTRONIKON 1 COMPRESSOR GA 7 ...
➡️ Reply
#Atlas Copco by chagas on 2009-06-02 00:30
por favor gostaria que se possivel me enviassem manual de algumas maquinas (compressores) obrigado
➡️ Reply
#Atlas Copco by alex on 2009-06-04 03:02
necesito manual ya que en mi empresa llegó un compresor atlas copco ga30ff desde otra faena de la misma empresa, pero se extravió el manual.Atte Alex Rivera III región Chile.
➡️ Reply
#Atlas Copco by odimar on 2009-06-04 16:43
service manual
➡️ Reply
#Atlas Copco by GANESH on 2009-06-06 12:45
dear sir, i have elektronikon II unit but some problem is inside i want some information ragarding cirquit digram or IC Details used in unit i hope u will give me response kindly.. Thanks ganesh
➡️ Reply
#Atlas Copco by sean o connor on 2009-06-12 08:06
have compresser serial no aii351702 kneed to change settingshope yoy can help thanks sean
➡️ Reply
#Atlas Copco by P van Niekerk on 2009-06-12 13:42
Can you Pleas assist in an electronic copy of the manual on the Elektronikon II
➡️ Reply
#Atlas Copco by khushnood on 2009-06-16 06:53
need software to connect the Elektronikon control module with pc and and need all hex file of Elektronikon control module
➡️ Reply
#Atlas Copco by khushnood on 2009-06-16 06:54
need software to connect the Elektronikon control module with pc and and need all hex file of Elektronikon control module
➡️ Reply
#Atlas Copco by samwong on 2009-06-16 11:20
Hi,i need Air compresuress GA55 manual for order a elec valve setplsSAM
➡️ Reply
#Atlas Copco by urbina alexander on 2009-06-17 02:35
could you please send a trouble shooting man del Elektronikon
➡️ Reply
#Atlas Copco by Daniel Ehlenz on 2009-06-18 03:22
Hi, I\'m going to commissioning 02 ZT 22 an 02 CD 50, but i need those manual to read before, can you send me an electronic copy in pdf.thanks in advance.Daniel EhlenzInternational Field Service Technician Senior.www.Exterran.com
➡️ Reply
#Atlas Copco by ali on 2009-06-18 13:03
I the manual for the Electronikon type number 1900 0700 05
➡️ Reply
#Atlas Copco by hanafi on 2009-06-19 13:02
merci
➡️ Reply
#Atlas Copco by RenTaosheng on 2009-06-25 01:57
hello,i want an Atlas copco Elektronikon mkiv user guide sweden atlas inc 1999,thank you
➡️ Reply
#Atlas Copco by ahmed aly on 2009-06-29 14:16
Dear Sir,I would like to request the technical detailed catalogue for your compressor type GA5 FF S/N: AII 158303 as we need the technical catalogue for it (including troubleshooting procedures) thank youAhmed A. Aly | Chief EngineerIHG Port Ghalib | PO Box 23, Port Ghalib, Marsa Alam, Red Sea, Egyp...
Show More
➡️ Reply
#Atlas Copco by barka on 2009-07-05 17:39
Sir,We are in need of ATLAS COPCO\'s ELEKTRONIKON II Part No: 1900 0710 02 and 1900-0590-73 connection wiring diagram. If you have it, kindly send us.
➡️ Reply
#Atlas Copco by barka on 2009-07-05 17:41
sir.Manual For Atlas Copco GA55 Requesedthanks.
➡️ Reply
#Atlas Copco by ejaz ayub on 2009-07-06 06:44
hello sir,i am using GA 90 compressor. earlier i upgradaed my compressor and replaced old control module with new Electronikon but i did no receive any catalouge or operating manual with this. could you please send me a complte manual for above module,best regardsejaz ayubelectrical engineer
➡️ Reply
#Atlas Copco by Dimitar Minchev on 2009-07-10 06:10
We have GA22FF with Elektronikon I controll. Manual is for Elektronikon II and I cannot configure compressor. Please, send me manual for Elektronikon I.Thank you!Best regards
➡️ Reply
#Atlas Copco by Hoàng Chính on 2009-07-14 15:28
Dear Derrick Taylor!If you have ELEKTRONIKON User Manual, please send me. Thanks a lots
➡️ Reply
#Atlas Copco by Ruben on 2009-07-14 18:21
I\'m having problems with my compressor. It says \"overload motor\" and it wont reset. I cant find my user manual if you can send me one thanks, or assist me with my problem.
➡️ Reply
#Atlas Copco by Muhammad Mansoor on 2009-07-16 08:46
We have replaced the module of G11A with the module of G11FF , kindly do advise as it is giving sensor light ,
➡️ Reply
#Atlas Copco by souhad Zebian on 2009-07-18 10:03
Dear Sir,we are facing problem getting the right support from the local AC personnel as always these docuemnts are protected .please we urgently requesting the following documentation:1- trouble shuting manual for ZR 250 2- ES8 and electronikon software and control logic.your support in this matter ...
Show More
➡️ Reply
#Atlas Copco by mukalazi steven on 2009-07-22 18:55
i like the way you care about your customers.eg u send yo technicalstaff to help us if we get ga 22 ff problems.
➡️ Reply
#Atlas Copco by Thien Pham on 2009-07-23 03:40
Error: Keyboard no active.Emergency stop CloseShd Open
➡️ Reply
#Atlas Copco by Thien Pham on 2009-07-23 03:46
Send to me: Manual Elektronikon II.Thank.
➡️ Reply
#Atlas Copco by Anurak P. on 2009-07-27 03:35
Send to me: Manual Elektronikon II.too ,Thank you
➡️ Reply
#Atlas Copco by satish on 2009-07-27 16:03
we are using 12 numbers of screw compressor from yours. it good in service we need the above document
➡️ Reply
#Atlas Copco by bhaskar on 2009-07-30 11:23
kindly send as soon as possible
➡️ Reply
#Atlas Copco by David on 2009-08-03 11:40
Very interesting and really needed manual
➡️ Reply
#Atlas Copco by Yavuz Özdemir on 2009-08-04 08:48
Ineed to take information of electronicon PLC of Atlas copco kompressor.How ý can do this. Can you help to me at this point. I f you have any solution about this can you help to me.
➡️ Reply
#Atlas Copco by Ernesto Zorrilla on 2009-08-05 21:22
control atlas copco elektronikon24Volts ac part. g0005g601
➡️ Reply
#Atlas Copco by Richard Nichols on 2009-08-06 20:48
The above module was recently replaced due to display and inputs \"freezing up\" and not functioning. The new module works fine. Can the malfunctioning module be rebuilt and tested? Perhaps the K4 relay, which sees a lot of action could also be replaced? How much cost? It was running on a ...
Show More
➡️ Reply
#Atlas Copco by mubashir saeed on 2009-08-08 10:17
dear sir our controler is out of order. it displayed 10300000 only help me thanks
➡️ Reply
#Atlas Copco by ed lopez on 2009-08-10 22:31
hello, i need the user manual for conection of two compressor , one first and other auxiliary, thanks.
➡️ Reply
#Atlas Copco by qussai alsahir on 2009-08-11 06:58
We need atlas copco serveis manual
➡️ Reply
#Atlas Copco by Rumen Nanev on 2009-08-11 18:32
I need more information for Atlas Cotco GA55
➡️ Reply
#Atlas Copco by Mohammad Reza Dadjoo on 2009-08-12 06:11
i need manual ga75
➡️ Reply
#Atlas Copco by Nelson ilbay on 2009-08-14 12:25
NEED MANUAL DE MODULO ELEKTRONIKON
➡️ Reply
#Atlas Copco by rickey on 2009-08-17 15:02
The only thing that show up on the display is 110200000000
➡️ Reply
#Atlas Copco by Nhat Vinh on 2009-08-20 10:29
I can\'t start my GA75 when i install new Elektronikon II. When i power up, the Elektronikon II don\'t show any menu.
➡️ Reply
#Atlas Copco by Denis Tremblay on 2009-08-20 19:45
Please provide P&D of the following item:ELEKTRONIKON MODULE 1900 0710 32
➡️ Reply
#Atlas Copco by akbari on 2009-08-22 06:23
HELLO MR/MISS I NEED TO MANUAL OF ELEKTRONIKON REGULATOR BECAUSE I HAVE TO REPIRE IT AS SOON AS PLEASE SEND IT TO ME .WITH BEST REGARD JA .AKBARI
➡️ Reply
#Atlas Copco by La Duc Hanh on 2009-08-23 09:10
Our company is installing GA7 FF to customer. Howver, there was no user manual along with the machine. Please help to send the GA7 FF manual !!!
➡️ Reply
#Atlas Copco by pammu on 2009-08-23 12:25
hello sir, we are using elektronikon 1 & 2 in our company... so we require manuals of those...
➡️ Reply
#Atlas Copco by edelmicio do carmo e silva on 2009-08-23 12:39
empresa gramatura em coroados sp
➡️ Reply
#Atlas Copco by Edwin on 2009-08-23 13:59
Tengo un GA 30 fuera de servicio y para habilitarlo necesito el diagrama electrico o las conexiones del electronikon 1900 0700 08
➡️ Reply
#Atlas Copco by STEVEN LAMBERT on 2009-08-25 20:05
FROM A ELEKTRONIKON TO ELEKTRONIKON II
➡️ Reply
#Atlas Copco by Nasser Rabie Abd El-Hamied on 2009-09-02 07:14
the service and spare parts manuals required for Atlas Copco compressor type ZT22/HAT and type OIS K-27
➡️ Reply
#Atlas Copco by Ranses Jose Ziade on 2009-09-02 16:49
THE AIR COMPRESSOR OVERLOADS AND THEN STOPS.LIKE TO KNOW HOW TO PROGRAM IT.THANK YOU!
➡️ Reply
#Atlas Copco by Satish Rane on 2009-09-03 05:58
I wanted to activate auto restarting for Atlas Copco after power resumption.To do this I required the above mentioned Manual
➡️ Reply
#Atlas Copco by victor riquelmesaavedra on 2009-09-05 13:57
me podrian enviar el manual de usuario de:atlas copco compresor de aire estacionariosGA50VSD FFYA QUE HAY UN PROBLEMA EN LA PARTIDA PRODUCTO DE ESTO EL EQUIPO SE DETIENE Y EL ELEKTRONIKON ARROJA ERROR 177 .SE AGRADECERIA MUCHO SU AYUDA .SALUDA ATTE. A USTED VICTOR RIQUELME INGENIERO ELECTRICO .
➡️ Reply
#Atlas Copco by Giar Ronald on 2009-09-06 00:15
We want to buy Elektronic RegulatorParts No. 1900 0701 24For Atlas Copco GA 160 Compressor
➡️ Reply
#Atlas Copco by Roman Silva on 2009-09-08 15:22
The best compressor!!
➡️ Reply
#Atlas Copco by Ganan on 2009-09-11 11:22
You have the better product !
➡️ Reply
#Atlas Copco by Nathaniel Edeoghon on 2009-09-11 15:49
my Elektronikon II regulator for FD410A dryer Serial number APF138783is shut down alarm that has refuse to reset.the alarm is PDP not normal and sensor fault.
➡️ Reply
#Atlas Copco by Daniel Clifton on 2009-09-11 18:32
Need manual to change setpointsThank you
➡️ Reply
#Atlas Copco by Ravikumar Jadhav on 2009-09-12 13:50
Nice product
➡️ Reply
#Atlas Copco by mohamed on 2009-09-12 22:32
it is very good compressor
➡️ Reply
#Atlas Copco by DEBASISH GOUDA on 2009-09-15 09:57
ZR-250 Model compressor is easy to use,but it\'s spare details needs to be explained properly.
➡️ Reply
#Atlas Copco by DEBASISH GOUDA on 2009-09-15 10:00
Electronikon controller is a very good controller.
➡️ Reply
#Atlas Copco by Daniel Clifton on 2009-09-15 16:45
excellent company
➡️ Reply
#Atlas Copco by Carlos Franchin on 2009-09-16 14:09
I can\'t start my GA75. When i power up, the Elektronikon II, show: time out inversor.What is this?What should I do?Please send to me: Manual Elektronikon II.too ,Thank you!!!
➡️ Reply
#Atlas Copco by albertoli fernando on 2009-09-22 14:15
handbook equipment
➡️ Reply
#Atlas Copco by Ramiro García on 2009-09-22 18:34
Please, i need manual atlas copco GA 75Thank you.
➡️ Reply
#Atlas Copco by pedro varela on 2009-09-24 14:43
i need the manual for my job
➡️ Reply
#Atlas Copco by rajesh on 2009-09-25 10:06
i hope that u will send as soon as possible
➡️ Reply
#Atlas Copco by seddik on 2009-09-30 19:52
need technical manual(s) of Elektronikon
➡️ Reply
#Atlas Copco by gabriel smidu on 2009-10-09 19:03
it is good bat I need the manual
➡️ Reply
#Atlas Copco by gregory uribe on 2009-10-12 17:46
por fabor nesecito el manual de usuario e instalasion de el modelo1900 0700 05. si pueden conserguirme esta informacion acerca de este equipo por favor enviarmela es que tengo un problma y no tengo los datos necesario para hacer la reparacion...
➡️ Reply
#Atlas Copco by ydrebla on 2009-10-12 23:53
please I need to check something in this manual
➡️ Reply
#Atlas Copco by Martin on 2009-10-13 07:01
HiI need a manual on the elektronikon 2 controller. ie set-up, adjusting,etc.thanks
➡️ Reply
#Atlas Copco by shivraj choudhary on 2009-10-18 15:47
plesea send me Electrical wiring diagram of GA 30
➡️ Reply
#Atlas Copco by eng:adel on 2009-10-19 12:22
PLEASE WE NEED PRICE FOR THIS ITEMS Item: 1 Qty :2 Elektronikon touch screen . Ser no 31100904329Part no 190071032 please answer before 24/10/2009 Best Regards
➡️ Reply
#Atlas Copco by Hesham Farouk Ibrahim on 2009-10-22 18:58
Atlas Copco ZT22 Manual
➡️ Reply
#Atlas Copco by MUHIRWA Prosper on 2009-10-24 08:28
I NEED MANUEL FOR ATLAS COPCO GA55AFFTHANKS.
➡️ Reply
#Atlas Copco by mahmoud on 2009-10-25 14:46
I need operation abd maintenance manual for Atlas Copco XAS 365-Air Compressors ,THANKS
➡️ Reply
#Atlas Copco by joan nugroho on 2009-10-28 01:28
I want to request user manual elektronikon II panel control of air compressor model GA15.thanks & Pls, feedback to me as soon as.Thanks and best regards.Joan NugrohoPT. Bukit makmurIndonesia
➡️ Reply
#Atlas Copco by jorge de leon on 2009-10-28 16:01
we have a atlas copco compresor model GA90USD SERIAL NUMBER A11495509 could you send me be email the manual please.
➡️ Reply
#Atlas Copco by francisco juarez on 2009-10-30 01:33
i need the manual for elektronikon IIthank you
➡️ Reply
#Atlas Copco by georgi on 2009-11-01 12:30
how much is the price of regulator part nr: 1900 0701 06
➡️ Reply
#Atlas Copco by hadi on 2009-11-02 02:53
hello,dear! my company have two compressor model ga55 ff. and this compressors is good product. But I have problem abaut \" dp oil separator\". It problem is pressure to high. To high from maximum servise [ 1 bar ].Please, can you help for this problem?
➡️ Reply
#Atlas Copco by karbou on 2009-11-04 18:02
i have a atlas copco GA 55 with a old elekctronikon, i need de program it best regard
➡️ Reply
#Atlas Copco by Steve Shand on 2009-11-05 20:30
I am experiencing a high outlet temperature alarm which cannot be cleared, what do i do?
➡️ Reply
#Atlas Copco by Steve Shand on 2009-11-05 20:32
I am having difficulty locating our operating manual. could you assist me? thanks
➡️ Reply
#Atlas Copco by Nguyen Ngoc Quang on 2009-11-06 16:27
My company use air compressor system of atlas copcobut i don\'t have manual about electronikon II, because I can\'t modify any parameter. I want to have manual about atlas copco GA75+ (both mechanical and electrical manual). My company is Cement Hatien 1 stock company. Can you help me?Thanks & b...
Show More
➡️ Reply
#Atlas Copco by eltahir on 2009-11-06 20:59
Atlas Copco failure with code 106
➡️ Reply
#Atlas Copco by naeem on 2009-11-07 13:21
could you please send me compressor control panel manual elecktronikon
➡️ Reply
#Atlas Copco by cesar del palacio on 2009-11-07 18:02
We need the manual for atlas copco compressorTNKS!!
➡️ Reply
#Atlas Copco by Nguyen Dinh Thang on 2009-11-12 03:34
I need a user manual air commpressor GA55FF, thanks!
➡️ Reply
#Atlas Copco by FRANKLIN ALARCON on 2009-11-15 00:37
1.- GA75 AIR COMPRESSOR ELEKTRONIKON MANTENANCE MANUAL2.- GA90 AIR COMPRESSOR ELEKTRONIKON MANTENANCE MANUAL3.- PLEASE SEND THE ELECTRONIKON I AND II MANUALSincerelyFranklin Alarcon
➡️ Reply
#Atlas Copco by Behcet on 2009-11-18 07:49
I need from electronikon software and some technical manual.Thanks for your help.
➡️ Reply
#Atlas Copco by Daniel on 2009-11-19 15:31
A quien corresponda necesito un manual tecnico de un compresor GA15
➡️ Reply
#Atlas Copco by dphilp on 2009-11-20 12:35
I see the post of people asking for a manual for a ELEKTRONIKON COMPRESSOR CONTROLLER P/N: 1900 0700 05 made by ATLAS COPCO. I have looked everywhere, but I can’t find any links. Can someone help me get a hold of one of these manuals please?
➡️ Reply
#Atlas Copco by KONSTANTINOs FETINTZE on 2009-11-21 07:22
serial no. 17880type: 1613 9395 99design press 15barvolume 60 ltest press 30 bar
➡️ Reply
#Atlas Copco by kenan saruhan on 2009-11-23 00:47
ga55 manual
➡️ Reply
#Atlas Copco by nguyễn minh thuận on 2009-11-23 05:59
Are you mail file it?. Thank you very mach.
➡️ Reply
#Atlas Copco by nguyễn minh thuận on 2009-11-23 06:02
Are you file it?thank you
➡️ Reply
#Atlas Copco by Calugar on 2009-11-23 08:34
Dear Sir,can you please provide me the manual of electronikon.RegardsCalugar
➡️ Reply
#Atlas Copco by Eduardo Sanchez on 2009-11-23 18:42
I need the elektronikon II manual in order to change parameters.Thanks,Ed
➡️ Reply
#Atlas Copco by Murty on 2009-11-24 08:54
Atlas copco really user friendly,Displays on LCD System failure 11,what is it mean.
➡️ Reply
#Atlas Copco by bhalchandra jadhav on 2009-11-25 03:45
Dear sir,Please send me the Electrical diagram as mention above subject.Thank you,Bhalchandra.
➡️ Reply
#Atlas Copco by JITENDRA on 2009-11-27 06:44
WE REQUIRE MANUAL FOR G-11 AIR SCREW COMPRESSOR AND ELECTRONIC CONTROL PANEL LATEST VERTION. THIS HAS BEEN FITTED IN OUR NITROGEN PSA SYSTEM.
➡️ Reply
#Atlas Copco by ARAVIND V on 2009-12-01 09:46
we have an air compressor\"ATLAS COPCO GA-30 \"that has served us around 6 years ,today that stoped working & shows an error code\"system failure 104\".SO am waiting for your valiable responds to solve this. Thanking you Aravind
➡️ Reply
#Atlas Copco by manazir on 2009-12-03 06:09
a soon as posible
➡️ Reply
#Atlas Copco by yahya asy on 2009-12-08 07:40
hi pls..i need service manual for elektronikon controllerthank you
➡️ Reply
#Atlas Copco by manazir on 2009-12-09 10:46
Dear sirPlease send us the Atlas capco compressor VFD parametersBRManazir
➡️ Reply
#Atlas Copco by Juan Luis Llado on 2009-12-10 18:49
hi,I need a trouble shooting manual for a Atlas Copco Mod. GA 209
➡️ Reply
#Atlas Copco by anil on 2009-12-13 07:01
hi... we are working in sudan,we have your product atlas compressor model GA-75. We are do not know how to modifiy setings in our controller..So pls help
➡️ Reply
#Atlas Copco by sivakumar on 2009-12-13 10:26
Dear sir, I am sivakumar working in Arabian bulk terminal (ETA Group),sudan.Here one problem in electronikon 1 panel did not reset.Please replay service center near country then how brought new one address. ThanksBest regardsS.SivakumarE&I Dept.Sudan.
➡️ Reply
#Atlas Copco by Liju Paul Kuruvilla on 2009-12-14 04:46
Dear Sir We are using your Compressor for the past 7 years, your models GA 37,GA55 and so But now i am facing a problem related to electronikon controller. It is showing an error B-SW0106 31_Nothing else is there in the display and the compressor is not switching ON
➡️ Reply
#Atlas Copco by Liju Paul Kuruvilla on 2009-12-14 04:48
I want electronikon 2 controller manual
➡️ Reply
#Atlas Copco by nitis pooasa on 2009-12-14 13:29
I work for Circuit Electronic Industries public ltd in thailand we use 8 ZT90compress air machine I woud like to get the troubleshooting for electronikon control module
➡️ Reply
#Atlas Copco by uton black on 2009-12-14 19:56
need a circuit diagram for a electronikon 1900 0700 06
➡️ Reply
#Atlas Copco by Nitis Pooasa on 2009-12-16 09:56
my electronikon could not display the charactor
➡️ Reply
#Atlas Copco by reza on 2009-12-16 16:35
dear sir:i need wiring schematic for atlascopco ga11-22 atr comperessor.thanks.
➡️ Reply
#Atlas Copco by Gary Jelen on 2009-12-19 16:47
Pleas can you send me an operation manual for the Elektronikon
➡️ Reply
#Atlas Copco by naden venkatasami on 2009-12-21 12:11
I have an atlas copco compressor GA75 when switch on power it appears on the display 100300000000 and cannot start the compressor and also no touch switch are working .Please advice urgently
➡️ Reply
#Atlas Copco by anupam on 2009-12-23 07:00
It\'s a very good compressor ,reliable and suitable for our requirement.
➡️ Reply
#Atlas Copco by KARTHIKEYAN on 2009-12-24 10:33
Manufactured 2007, ATLAS COPCO AIRPOWER - Belgium. We need the electric drawings and ELEKTRINIKON II TECHINICAL AND USER MANUAL
➡️ Reply
#Atlas Copco by minhthuantknl on 2009-12-25 04:34
Are you send file manual Air compressor Atlas copco GA 75 for my?Thank you
➡️ Reply
#Atlas Copco by ngodactoan on 2009-12-25 09:19
I\'m Toan. I am working in MSP-1, White Tiger Field. We used Ga-75. Now, we don\'t have document \" manual of Electronikon\". You can hepl me, send for me document.
➡️ Reply
#Atlas Copco by Mark Bateman on 2009-12-29 05:45
need a user manual or someone to contact me on 0407000457 to get our compressor going again, won\'t start after a blackout
➡️ Reply
#Atlas Copco by moolchand on 2009-12-29 07:43
i want to know what point change when elktornikon control mode change local to remote
➡️ Reply
#Atlas Copco by francisco juarez on 2009-12-31 17:48
I need Elektronikon control system Manual for GA200w very important Thank you
➡️ Reply
#Atlas Copco by Gert Smith on 2010-01-02 10:28
We have the same problem. Can not use any key on the keyboard. Can not reset any alarms or use the uo and down keys. The display shows temperature element outut. The setting is 120 DegC and the real vakue is 36 DegC. The alarm led and the power led is flashing.Please help.Gert
➡️ Reply
#Atlas Copco by ijenebe anthony on 2010-01-04 11:16
how do i get my GA22 atlas copco compressor started, it is indicating some form of alarm that i cannot decode as the display is not in English language. Probably we can change the language setting?thanks.
➡️ Reply
#Atlas Copco by Nigel Poole on 2010-01-07 02:29
Im after the user manual for the Electronikon II controller, specifically need to change somesettings on the unit to control the GA75VSD Unit.Manual should have description in it for the direct, indirect setpoints etc.Can any one send me a copy via e-mail please.ThanksNige.
➡️ Reply
#Atlas Copco by JOSEPH ALEXANDER OF REZENND on 2010-01-09 18:52
I want to request user manual elektronikon II nr1900 0710 12 panel control of air compressor model GA22 thanks.
➡️ Reply
#Atlas Copco by JOSEPH ALEXANDER OF REZENND on 2010-01-09 18:52
I want to request user manual elektronikon II nr1900 0710 12 panel control of air compressor model GA22 thanks.
➡️ Reply
#Atlas Copco by Joseph Alexannder of Rezend on 2010-01-09 19:22
CONNECTION DIAGRAM-------------------------------------------------------------------------------- Posted by Joseph Alexander of Rezend on Saturday, january 9 2010Sir,We are in need of ATLAS COPCO\'s ELEKTRONIKON II Part No: 1900 0710 12 connection wiring diagram. If you have it, kindly send us.than...
Show More
➡️ Reply
#Atlas Copco by joy prasanna on 2010-01-12 07:53
Dear sir, We want ELEKTRONIKON MANUAL please help methanking you
➡️ Reply
#Atlas Copco by Nguyen Quang Thuc on 2010-01-14 02:07
Dear Sir/Madam, I\'m Nguyen Quang Thuc, working for An Viet Technology Development & Application Limited company ( An Viet TDA ). We\'re specializes in supplying the spare parts, and equipments serving for Cement Industry and other Industrial Plants. This is an opportunity for us to reach your p...
Show More
➡️ Reply
#Atlas Copco by Pelliculages de l\'ouest on 2010-01-14 08:24
We have a Engine GA 55 VSD with a elektronikon 2 .Can you send the doc from this Elektronikon 2 for read informations .We have no more the documentation.Best regard
➡️ Reply
#Atlas Copco by Thien Viet on 2010-01-14 15:42
ELEKTRONIKON PN 1900070125ThienvietsjcMail: thienvietjsc@gmail.comTele: 0435562928Fax: 043556292942/218/16/2 Tran Duy Hung - Cau giay- Ha Noi
➡️ Reply
#Atlas Copco by DUBRULLE on 2010-01-18 18:13
If you need Elektronikon manual, I can send it to you by pdf format. Let me know your email adress
➡️ Reply
#Atlas Copco by ahmed on 2010-01-19 07:47
HIGH QUALITY PRODUCTS
➡️ Reply
#Atlas Copco by muh.ihsan on 2010-01-21 03:25
we will change GA90VSD to be YD startingwe need wiring diagram Y-Delta connection and wiring diagram elektronikon II
➡️ Reply
#Atlas Copco by juan manuel on 2010-01-21 16:17
please send me the users manual for controller elekctronikon compresor ga30tanks
➡️ Reply
#Atlas Copco by Ivan Yordanov on 2010-01-24 10:10
Dear Sir ,We need insruction Manual on English language for compressor Atlas Copco type GA-11 FF .Best RegardsIvan YordanovC/E Sanco Starchief.star@sanco.noTel: 0044 1224 372839
➡️ Reply
#Atlas Copco by R.S. Patel on 2010-01-25 02:33
Atlas Copco compressor is very reliable & energy effecient as compared to other compressor.
➡️ Reply
#Atlas Copco by Chet Shingle on 2010-01-26 00:05
I need a service manual for an XAS90JD compressor. E-Mail or call 609-674-3342
➡️ Reply
#Atlas Copco by Reinaldo on 2010-01-26 18:05
I would like to receive docomention about Atlas Copo GA55
➡️ Reply
#Atlas Copco by jacqueline alvarez on 2010-01-26 19:32
tengo falla no 13 en elektronikon
➡️ Reply
#Atlas Copco by David Ball on 2010-01-28 01:47
fuses for the fans were blown, and when we replaced the fuses the motor overload fault appeared on the screen with a red light flashing, will not reset and compressor will not turn on , please help
➡️ Reply
#Atlas Copco by Marcos Roberto Rosa on 2010-01-31 00:03
Olá boa noite! sou eletricista da Edk Mineração, e recentemente compramos um compressor ga 150 da Atlas, no manual diz que esta disponivel, o manual do controlador do mesmo, é possivel nos enviar?desde já grato!! pela a atenção.sem mais, Att. Marcos Roberto Rosa Eletricista
➡️ Reply
#Atlas Copco by Silverio Espinoza Roque on 2010-01-31 20:46
Agradeceremos nos proporcione un manual Completo de Compresora Atlas GA 55.Tenemos los siguientes problemas: La compresora cuando llega a la presion maxima ajustada se para sale el mensaje PARADA PROGRAMADA, y al volverse a Arrancar solo de apertura el rele de proteccion del Motor.Otro Compresor sal...
Show More
➡️ Reply
#Atlas Copco by alex on 2010-02-01 08:47
We have one (01) unit GA75 A WP compressor but the local supplier did not supply us the manual. Our unit is with serial no. PNA 822460 and we need the manual for troubleshooting because the engineer coming from the local supplier cannot resolve the problem and he do not have the manualYour immediate...
Show More
➡️ Reply
#Atlas Copco by khushnood on 2010-02-02 19:27
IF ANY ONE REPAIRING PROBLEM REGARDING ELEKTRONIKON MODULE PLEASE CONSULT WITH ME
➡️ Reply
#Atlas Copco by aqeel ahmad on 2010-02-04 13:49
Iam a trainee engineer of bewl automotive industry. Iam give a PRESENTATION about ATLAS COPCO AIR COMPRESSOR GA-22,GA30,GA45,GA75 to plant manager. But no catlog or manual and any document present in industries i get gain knowledge about air compresssor ATLAS COPCO. So please send me a catlog or man...
Show More
➡️ Reply
#Atlas Copco by AQEEL AHMAD on 2010-02-04 13:56
Dear sir,please give me a manual of ATLAS COPCO AIR COMPRESSOR GA75THANK\'S & REGARD
➡️ Reply
#Atlas Copco by Wayne Ellis on 2010-02-05 17:29
Could you supply a user manual for the elektronikon controler
➡️ Reply
#Atlas Copco by claudia navarro on 2010-02-05 19:22
NE CESITO EL MANUAL
➡️ Reply
#Atlas Copco by synAIRgies on 2010-02-08 20:20
Dear,Which year is your compressor? let me knowbest regards,Guy Dubrullewww.synairgies.com
➡️ Reply
#Atlas Copco by S.RAVINDRANATH on 2010-02-09 11:00
ATLAS COPCO IS A LEADER IN COMPRESSORS.
➡️ Reply
#Atlas Copco by MOHAMMAD on 2010-02-10 14:31
I NEED A RECOMMENDED SPARE PARTS LIST FOR GA 37 ATLAS COPCO COMPRESSOR
➡️ Reply
#Atlas Copco by bayo on 2010-02-11 10:27
please i cant start my atlas copco GA 75, it show system failure 10, 00100000.what can i do
➡️ Reply
#Atlas Copco by cesar on 2010-02-11 23:01
do you guys have a operators manual for a atlos copco dryer model.fd380 type r404a i bought one at an auction with no manual
➡️ Reply
#Atlas Copco by PREMARATNE W.P. on 2010-02-16 12:33
Dear Sir,We have 3 No. of this type of air compress, and one of this can\'t start. the fault indication was (104 ) system faulty I checked input voltage and tightened call connection of regulator but all are OK Again i tried but not start. Can you please tell what i wants to check more. When i repla...
Show More
➡️ Reply
#Atlas Copco by W.P.Premaratne on 2010-02-16 17:17
Dear Sir, We are using our Sea Bulk Cement Trading company,in Port Sudan, a three nos. of your GA5 air compressors for air delivery to our plant equipment. I have face more difficulties due to without trouble shooting user manual of klektronikon regulator. the error cord is 104 I would be most appre...
Show More
➡️ Reply
#Atlas Copco by Victor on 2010-02-17 07:07
Dear sir ,need Elektronikon I panel manual.We are use Your product (air compressor) With best regardsVictor
➡️ Reply
#Atlas Copco by Mohamed Younis on 2010-02-17 09:24
good morningI need manual book Electronikon II in pdf filethanksM. Younis
➡️ Reply
#Atlas Copco by Abadat ali on 2010-02-18 09:47
Dear we are using your compreesoors Model GA 55 FF & GA 30 FF.Pls send ud the prevetive maintenance schedule urgently. Thanks a lot.Abadat AliMaintenace Incharge.
➡️ Reply
#Atlas Copco by devinder singh rawat on 2010-02-20 10:42
Dear sir,We want ELEKTRONIKON MANUAL please help methanking you
➡️ Reply
#Atlas Copco by Ngan Do Thuy on 2010-02-22 07:17
Dear Alats Copco!If you have GA 200 Compressor User manual, please send me. Thanks a lots
➡️ Reply
#Atlas Copco by charles camilleri on 2010-02-23 16:09
do you repair modules is for a mercedes it on the drivers door it works all the conrols on the drivers side door panel if you do repair have you please got idea of cost thanks
➡️ Reply
#Atlas Copco by mohammad shahnawaz on 2010-02-27 23:40
Dear sir.i really need user manual for electronikon,bcoz i have an air compressor GA 50VSD and unfortunately compressor electrnicon has fault, also i have consulted to concern person in pakistan but he didn\'t help me and i m in deep trouble right now.I hope u will help me out. Thanx
➡️ Reply
#Atlas Copco by hamed on 2010-02-28 17:20
I want aparameter and electric circuit of ga 75 atlas copoco 7.5 bar please support me
➡️ Reply
#Atlas Copco by JERRY TOO on 2010-03-04 03:49
DEAR MR/MS, I NEED YOUR HELP. DO U POSSIBLE SENT ELEKTRONIKON 1900 0700 03 OF THIS UNIT INSTRUCTION MANUAL FOR US? BECAUSE WE GET SOME PROBLEMS FOR THIS UNIT. AND PLEASE REPLY AS SOON AS POSSSIBLE. THANK YOU VERY MUCH!!!
➡️ Reply
#Atlas Copco by Ghislain Gagnon on 2010-03-06 18:01
J\'ai besoin de connaitre les contacts auxiliaires du compresseur pour qu\'il démare un ventillateur quand il démare.
➡️ Reply
#Atlas Copco by SAUL TORRES APEÑA on 2010-03-07 04:06
COMPRESOR MUY ROBUSTO,ECONONICO Y FACIL OPERACION
➡️ Reply
#Atlas Copco by lipaing on 2010-03-08 01:48
sir / madam,i need ATLAS COPCO\'s ELEKTRONIKON IIB, GA55-90 wiring diagram.If you have it, kindly send me.Thank you,Lipaing Setya BudiPLC EngineerPT.Global Multi Solusi Jl. Sriwijaya 23. Surabaya INDONESIA
➡️ Reply
#Atlas Copco by imran khan on 2010-03-10 15:42
i need a user manual in vfd siemens simovert ihave in aproblem send me a user manual
➡️ Reply
#Atlas Copco by dulal chandra banik on 2010-03-11 05:44
we are using ZT22 oil free compressor for DESAL plant .one compressor\'s electronikom reglator showing the following error code 110200000000 .please send me trouble shooting manual and solution of this error code.
➡️ Reply
#Atlas Copco by Hadi Muliadi Alam on 2010-03-13 03:43
It\'s good compressor.
➡️ Reply
#Atlas Copco by zafar ansari on 2010-03-13 08:02
dear sir.we need manuals of ATLAS COPCO GA55AFF for maintenance puropose.Kindly do this favor and provide if possibility is there through soft copy via email.thanks
➡️ Reply
#Atlas Copco by GHI on 2010-03-15 07:49
i need ELEKTRONIKON usera manual to order parts.
➡️ Reply
#Atlas Copco by Yosief Ghidey on 2010-03-23 06:06
We do have GA 37 Atlas Copco air compressor we need an operation manual of eleKtroniKon master control modules operation manual (hand Book ) English Version Thank you for you Coperation Yosief Ghidey P.o.Box 5218 Asmara Eritrea
➡️ Reply
#Atlas Copco by Jesús Ricardo Meade Rdz. on 2010-03-24 17:01
I am lloking forward for Service Manual for compresssor Atlas Copco GA55C FF 2003, n/s AII382100 y AII383750Thank you
➡️ Reply
#Atlas Copco by Ahmad Ridwan on 2010-03-30 01:18
Dear Sir/MadamI have Atlas Copco GA55 compressor. Now Elektronikon Master Control doesn\'t display anything except 100400000000. The compressor cannot be started for operational. PN : 1900070106SN : 0005054400001 What\'s wrong with the Control? Please Give me information. Thank You
➡️ Reply
#Atlas Copco by Ghulam Mustafa on 2010-03-31 06:13
I want to request user manual elektronikon II panel control of air compressor model GA30 VSD FF.thanks & Pls, feedback to me as soon as.Thanks and best regards.
➡️ Reply
#Atlas Copco by rahimi on 2010-04-01 19:58
Dear Sir,we need maintenance manual of GA75 Air Compressor(Oil inject compressor).please send us of it.we are waiting for your reply.regards.rahimi
➡️ Reply
#Atlas Copco by Pratapchandra Dixit on 2010-04-03 07:05
no display is seen.partno.1900071031serialno.31100510073
➡️ Reply
#Atlas Copco by Sourabh Dhiman on 2010-04-04 03:29
Plz i have a problem of convertor fail error code 11 in my GA 30 VSD compr plz tell me trouble shooting of this
➡️ Reply
#Atlas Copco by ganapathi on 2010-04-05 05:57
Loading is not taking place.
➡️ Reply
#Atlas Copco by Mukul Mishra on 2010-04-07 03:26
We are facing problem with electronicon controller used in our Atlas Copco Compressor.In three number of controllers some DI or DO channel has become faulty. Please suggest is it possible to configure some another spare channel with the help of controller programming.Thanks
➡️ Reply
#Atlas Copco by maarif on 2010-04-08 09:53
hello, please i need some documents about elektronikon II controller compressor.think you for your helpe
➡️ Reply
#Atlas Copco by Lino Heredia on 2010-04-08 17:56
Por favor envieme el catalogo y diagrama electrico de conexionado del regulador 1900-0710-32Diagrama elctrico del control de arranque tipo:1900-3157-11-06
➡️ Reply
#Atlas Copco by Nazir Ahmad on 2010-04-09 13:45
I need the maintenance manual containing procedure of overhauling.
➡️ Reply
#Atlas Copco by thanhnt@vicostone.com on 2010-04-10 08:19
I have a GA30FF compressor but its control module broken. I want a new control module. Can I change it by elektronikon II VSD controller.
➡️ Reply
#Atlas Copco by Cao Ngọc Hà on 2010-04-12 04:47
Dear Sirs,I\'m from Vinaconex Advanced Compound Stone JSC in Viet Nam, I\'d like to order the VSD Controller for our Atlas Copco Compressor GA 30FF.Can you supply it?Best regars,Cao Ngoc Ha
➡️ Reply
#Atlas Copco by MEHRDAD YAZDANFAR on 2010-04-12 08:16
hello,i need the maintenance manual of ga 200 -637 air screw compressor .would you please send me?thanks alot
➡️ Reply
#Atlas Copco by nestor on 2010-04-15 04:53
necesito el manual
➡️ Reply
#Atlas Copco by mario pecina on 2010-04-15 13:19
resolver problema de sobrecaga del motor y sobrecarga del motor de ventilacion de un compresor ZT22
➡️ Reply
#Atlas Copco by kirankumar on 2010-04-16 07:42
I want the electrical circuit diagram for GX 7 FF model atlas compressorRegards,Kiran
➡️ Reply
#Atlas Copco by NGUYEN VAN DUNG on 2010-04-22 04:13
I want to request user manual elektronikon II nr1900 0710 12 panel control of air compressor model GA18thanks.
➡️ Reply
#Atlas Copco by MOHAMED FAWZY on 2010-04-25 07:27
GOOD,but i need some data
➡️ Reply
#Atlas Copco by JOYS on 2010-04-30 10:17
Dear Sir, i need elektronikon error code details and elektronikon user manual.Please send my email id,please help meThanking you
➡️ Reply
#Atlas Copco by waleed ALKHATEEB on 2010-04-30 12:14
DEAR SIR I am working in JORDAN PHOSPHATE COMPANY JPMC We used GA-90.compressor year of manuf. in 2001 Now, we have a problem on the Elektronikon Control Module we have massage error 104 system fault we don\'t have document \" manual of Electronikon\". You can hepl me, send for me document...
Show More
➡️ Reply
#Atlas Copco by Alberto Vargas on 2010-04-30 12:41
I am looking information on control panel, How to program tha system to automatically start after a power failure?, without pressing the on button.
➡️ Reply
#Atlas Copco by waleed ALKHATEEB on 2010-04-30 13:33
Hello, I have problems with finding the source of the problem that presents aCompressor Atlas Copco GA-90, year of manuf. in 2001 following notice on the screen of Elektronikon \"FAILURESYSTEM 104 \", which is why soliciting their cooperation in finding theorigin of failure of this problem...
Show More
➡️ Reply
#Atlas Copco by waleed ALKHATEEB on 2010-04-30 19:19
elektronikon panel for GA 90 MANUF. IN 2001 PLEAS SEND me user manual for the above control and protection unit which also has fault diagnostics.
➡️ Reply
#Atlas Copco by Khaerudin on 2010-05-05 11:48
I have two units Screw Compressor Atlas copco GA 22.There is problem in the electrical.I need an wiring electrical for compressor Atlas Copco GA 22,please send me to wiring electrical.Best Regards,Khaerudin
➡️ Reply
#Atlas Copco by prakash on 2010-05-08 08:03
wiring diagram
➡️ Reply
#Atlas Copco by Rene Vestergaard on 2010-05-08 15:19
Dear Sir,Thank you very much if I can get the manual Book off Electronikon II 2005 Danish or english versionBest regardsRene
➡️ Reply
#Atlas Copco by Zdenek on 2010-05-12 21:29
Hallo i am need schematic diagram for Elektronikon(all)
➡️ Reply
#Atlas Copco by ali boumlik on 2010-05-21 14:01
je cherche la documentation technique du op electronokon ii
➡️ Reply
#Atlas Copco by M.Boopathy on 2010-06-05 06:44
NAME PLATE DETAILS OF ABB MOTOR USED FOR COMPRESSOR VFDABB Oy MOTORS Vaasa, Finland3 Phase Motor M3BC280SMC4B5IEC 75FF500M31095 - 732008No 0810-010537805FWP 400 VD 95 HzVHzKWr/minACOS phiDuty400D951022842240 - S9Prod Code3GBC282230-BXGAC411CT 635 NM1500 - 4185 rpm1080420911CP 160 KW4185 - 4500rpmNma...
Show More
➡️ Reply
#Atlas Copco by David Guinn on 2010-06-10 08:13
Can you email me a copy of the manual for CD 300 dryer controlled by a Elecktronikon II. We need the manual for the Elecktronikon II, We are having issues with the input from the relative humidity sensor 4-20mA input.Thanks
➡️ Reply
#Atlas Copco by Leiron Atienza on 2010-06-12 15:50
Good day gents!May we have a copy of the Elektronikon controller manual. Also the manual of the Elektronikon Input Module, we are having issues with the input from the dewpoint sensor.Many thanks....
➡️ Reply
#Atlas Copco by MUHAMMAD JAMIL AKHTER on 2010-07-09 14:58
COULD U PLEASE SEND ELECTRIC DIAGRAM OF GA75 ATLAS COPCO AIR COMPRESSOR FOR REPAIRING AND MAINTENANCE
➡️ Reply
#Atlas Copco by Emiljan Laze on 2010-07-13 15:05
I need to have a copy for an air compressor Of ATLAS COPCO model GA160F.The owner of the compressor doesn\'t have that,Can someone help !!!
➡️ Reply
#Atlas Copco by wahyu on 2010-07-14 03:25
please help, we need manual of compressor GA 75 WTankyou
➡️ Reply
#Atlas Copco by Srinivas on 2010-07-14 14:09
No supply of manuals for in house repairs by company engineers.
➡️ Reply
#Atlas Copco by Michael K. Dedeaux on 2010-07-19 18:44
We have an 11 condition and we don\'t have a manual, we lost power this past weekend and when we came back this morning, we found the number 11 condition flashing on our controller and we can not reset it.Thank You Michael Dedeaux
➡️ Reply
#Atlas Copco by nguyentanvu on 2010-07-20 02:15
i have a aircopresor, it is wrong .I dont have diagram to check it so i want your company sent for me diagram book atlascopco serial 02000400121(1900070007)
➡️ Reply
#Atlas Copco by noor ahmed on 2010-07-21 08:01
we have atlascopco compressor ga-75.we face problem with electronicon module but we dont have its manual
➡️ Reply
#Atlas Copco by noor ahmed on 2010-07-21 08:03
technical manual of electronicon
➡️ Reply
#Atlas Copco by BALAJI on 2010-07-24 05:22
we have 4 atlas copco ga55 our in our site and we need compressor and compressor controller user manual and if it possible the controller schematic diagramthanks with the best regards
➡️ Reply
#Atlas Copco by sherwin neil eduria on 2010-07-28 12:32
hi good day! i am a service utilities technician i would like to ask a favor i need repair manual and electrical diagram of atlas copco ga11 compressor.thank you very much hoping for your immediate response.GOD BLESS!
➡️ Reply
#Atlas Copco by juan pablo Diaz on 2010-08-06 01:33
dear friends:i have a GA22 compressor, but not have at diagrams or user manual ,service manual.do you have this manual?best regard.
➡️ Reply
#Atlas Copco by Ivan Biondic on 2010-08-07 11:00
Dear Sirs,Please send to me on e-mail manual for Elektronikon I.Best regards.Ivan
➡️ Reply
#Atlas Copco by P. Neto on 2010-08-07 23:21
very good
➡️ Reply
#Atlas Copco by Deon Govender on 2010-08-09 05:38
Good morning, I tried to download your user manual and troubleshooting guide for my Atlas Copco GA 90 Elektronica II compressor. Please send me all the relevant manuals for these compressors. Thank you Deon Govender
➡️ Reply
#Atlas Copco by A.Durai on 2010-08-09 09:24
For The following: 1. GA37FF 2. GA45FF 3. GA55FF 4. GA75FF 5. GA90FFWe are using the compressors as mentioned as above, This compressors are working very well. Because its user friendly system.We need a parts list - manual for the compressors as mentioned as above.Thank you.
➡️ Reply
#Atlas Copco by mukasakuraish on 2010-08-09 12:32
Good working machines
➡️ Reply
#Atlas Copco by mukasakuraish on 2010-08-09 12:36
well modernised machines
➡️ Reply
#Atlas Copco by mukasakuraish on 2010-08-09 12:40
easy machine and good
➡️ Reply
#Atlas Copco by mehdaoui on 2010-08-15 04:36
Bonjour, Je suis un instrumentiste travaillant à In Salah GAs (Sonatrach/BP) et j\'ai un problème sur le compresseur Atlas Copco: le module Electronikon m\'affiche : défaut système code erreur 106 et je n’arrive pas à résoudre le problème. Je viens vous demander de bien vouloir m\'orienter à trouver...
Show More
➡️ Reply
#Atlas Copco by CESAR RIVAS on 2010-08-16 19:33
por favor necesitamos el manual del panel elektronikon del compresor atlas copco GA55, ya que el mismo no presenta lectura solo indica varios numeros 10030000000 en la pantalla.
➡️ Reply
#Atlas Copco by CESAR RIVAS on 2010-08-16 19:36
Saludos.Porfavor puede suministrarno el manual del panel de operacion ELEKTRONIKON de un compresor GA55, ya que no presenta visualizacion en pantalla de los parametros ni ajustes, solo aparece una serie de numeros 1003000000, Gracias.
➡️ Reply
#Atlas Copco by Jhon on 2010-08-18 14:21
Por favor solicito los planos electricos de un GA55
➡️ Reply
#Atlas Copco by Manoj Bhandarkar on 2010-08-19 14:51
kindly send ga55 manual.
➡️ Reply
#Atlas Copco by romeo pabaya on 2010-08-20 17:05
no english version of operating manual GA37 atlas copco
➡️ Reply
#Atlas Copco by Udien on 2010-08-21 13:30
I have 2 elektronikon Atlas Copco MK3 has Faiure 200 . Any advice to solve this problem ?
➡️ Reply
#Atlas Copco by Atiq Khan on 2010-08-31 11:06
please send me parameters of ZR160 (VSD)
➡️ Reply
#Atlas Copco by Atiq Khan on 2010-08-31 11:10
we lost our manual. please help us
➡️ Reply
#Atlas Copco by Nadher on 2010-09-02 11:54
Dear friendmy machien type GA55 the temperature display flash and read arong reading also the reset switch does not affectcan you help me to repair the situationthanksregards
➡️ Reply
#Atlas Copco by Hernan PATARROYO on 2010-09-04 08:27
HelloThe Rig 11th of Caroil company has a compressor GA11+ and there are not any information. Can you send me the techinical and operate references we can check all alarms and warnings on HMI? For example, its display shows \"Warning Load\" and i don\'t know to do.Thank you for your helpRe...
Show More
➡️ Reply
#Atlas Copco by Gabriel Gonzalez Ramirez on 2010-09-06 03:24
I need The manual of compresor GA55 please send to e-mail above indicated. Soo as possible
➡️ Reply
#Atlas Copco by vivek mishra on 2010-09-08 06:15
Electronikon manual for Atlas copco ZR 160 VSD
➡️ Reply
#Atlas Copco by claudio araya vega on 2010-09-08 14:53
El compresor se detiene cuando llega a presión mñaxima de 7,5 bar aprox.además, como no tenemos el manual no sabemos exactamente como interactuar con el panel de control.De antemano muchas gracias
➡️ Reply
#Atlas Copco by Goran on 2010-09-09 11:14
pls send electrical wiring diagram of atlas copco gx 11 ff
➡️ Reply
#Atlas Copco by ARMANDO MARTINEZ RIOS on 2010-09-13 17:45
PRODUCT TIPO GA55NO. SERIE AII 464066MAX. PRESSURE (g) psi 107FREEAIR DELIVERY cfm 360MOTOR POWER hp 73.8max. speed r/min 3600year of construction 1998
➡️ Reply
#Atlas Copco by Ramses Rendon on 2010-09-14 23:27
We need the how program a compressor atls because, only be in load
➡️ Reply
#Atlas Copco by Anil shinde on 2010-09-15 07:35
All programmes are well explained and good for reference.
➡️ Reply
#Atlas Copco by nguyen tan vu on 2010-09-19 06:33
I want you company sen to you diagram elektronikon because my machine have problem.i hope you help me to do that thank you
➡️ Reply
#Atlas Copco by Serdar on 2010-09-20 12:04
Dear Sir/Madam ;we have GA7 and GA7FF Compressors. We need this units\' documents as soon as possible. Please send me GA7 and GA7FF Compressors\' Installation Operation and Maintenance Manuals.Waiting for your reply as soon as possibleBest Regards,Serdar Mechanical Engineer
➡️ Reply
#Atlas Copco by utomo on 2010-09-22 09:38
pls send to me manual dan part list compressor atlas copco ga55 ( soft copy )thanksutomo
➡️ Reply
#Atlas Copco by manik chandra kar on 2010-09-22 18:45
dear sir i want to your produt manual modle no GA55 for my job perpose
➡️ Reply
#Atlas Copco by costel on 2010-09-23 18:28
dear sir;in our ship we have ATLAS COPCO ga 11 ff compressors ,we have a problem . an alarm come on the display cod of error is \'\'SYSTEM FAULT 11\" and the compressor is shuting down.we haven\'t any documentation on board .i would like to receive doccuments for knowing the meaning of each err...
Show More
➡️ Reply
#Atlas Copco by GREG L on 2010-09-24 17:49
ATLAS COPCO FAILURE WITH CODE F10022
➡️ Reply
#Atlas Copco by Jamil Ahmed on 2010-09-25 05:26
Please , I need Technical Tips (PM, Turbleshooting) of A Air CompressorGA 250.Thanks Regards.Jamil AhmedMechanical Technician.Gas Field.
➡️ Reply
#Atlas Copco by wilman peralta on 2010-09-25 19:01
Saludos tengo un comresor en reparacion y en el panel me precenta fallo sistema 14 y no me permite entrar al menu para solucionarlo que puedo hacer
➡️ Reply
#Atlas Copco by Lawrence Angelo on 2010-09-26 10:52
i just need servise manual and electrical diagram we have two compressor of GA 90 but supplayer did not send us service manual and diagram so please send me regards
➡️ Reply
#Atlas Copco by paul busenbark on 2010-09-27 11:58
Retrofit install on a GA 75. Need a manual for the Elektronikon II. When retrofit installed we did no get a manual. We need to reset the maintenance required on unit to disable the red warning light since serviced.Thank you!
➡️ Reply
#Atlas Copco by Lewis Marquez on 2010-09-27 20:59
Can I realy use the elektronikon regulator for a variety of pressure sensor range Io and elktronikon with a sensor ranged from 0 to 25 may I recalibrate de elektronikon from 0 t0 17 bar?
➡️ Reply
#Atlas Copco by Lewis Marquez on 2010-09-27 21:04
may I have the configuration software so Ican change the calibration of an pressure input
➡️ Reply
#Atlas Copco by edgar on 2010-09-30 22:50
please, need manual repair de controler electronikon serie: 06983500028part. nr. 1900 0701 23than youedgar
➡️ Reply
#Atlas Copco by adnan siddiqui on 2010-10-01 19:00
and error detail year manufacture date 1997
➡️ Reply
#Atlas Copco by Donald Whitledge on 2010-10-05 12:53
Tneed a pic of the coupling assemble, there is a bolt & Washer missingPlease send me a manual asap! or call meKind Regards,Don Whitledge630-960-3900 EXT: 5820GA 75AII483062
➡️ Reply
#Atlas Copco by De Veirman Willy on 2010-10-07 09:04
Hello,I have one older type of compressor in my factory, but i missing the manual.Is it possible to send my that.The type is;GA22 Serial AII 261 662 2001Best regards,Willy
➡️ Reply
#Atlas Copco by saliou ngom on 2010-10-07 10:14
Nous avons acheté un régulateur Elektronikon II pour remplacer notre ancien régulateur Electronikon qui est en panne. J\'ai remarqué que les fiches de connection ne sont pas identiques par raport aux anciennes. Je voudrai avoir des renseignements avec schéma électrique à l\'auppui pour faire l\'adap...
Show More
➡️ Reply
#Atlas Copco by NITIN THEURKAR on 2010-10-07 11:09
Pl. send me Elektronikon user manual for GA 22 compressor.Thanks & RegardsNITIN
➡️ Reply
#Atlas Copco by Michael Martin on 2010-10-08 09:16
We need a maintenance manual to do repairs. I looked through some parts books and manuals that came with the compressors but they don\'t have the information I need. I need to know where the lubrication points are and to fill it. Your help is greatly appreciated
➡️ Reply
#Atlas Copco by Rajendra S Hawaldar on 2010-10-11 07:47
present compressor is good and efficient, want to repalce with ZR160 after getting details of VSD operations and function
➡️ Reply
#Atlas Copco by JB AGUIRRE on 2010-10-12 10:06
doesnt start
➡️ Reply
#Atlas Copco by jb aguirre on 2010-10-12 10:16
didnt start
➡️ Reply
#Atlas Copco by joey alva on 2010-10-12 14:10
Sir,we are having problem with our air compressor Type GA-22. we cannot start the unit due to alarm \"!\" with cubicle type 1900-0525-11 Ed-00 . S. No. 118259 control voltage 230/24. Also we could not have it trouble shoot due to unavailable manual and electronic diagrams onboard. Please i...
Show More
➡️ Reply
#Atlas Copco by Jonathan Old on 2010-10-12 22:14
Hi, Please supply manual for GA55
➡️ Reply
#Atlas Copco by Hoky on 2010-10-13 04:35
does not start .please advice ,need manual book for the electronikon 1 repair .Thanks
➡️ Reply
#Atlas Copco by Hoky on 2010-10-13 04:46
I need the manual of electronikon 1 .Part no 1900 0711 03.Thanks
➡️ Reply
#Atlas Copco by Jose Vilca on 2010-10-13 19:55
Manual de operacion con sus respectivos planos electricos e hidraulicos.
➡️ Reply
#Atlas Copco by msureshchander on 2010-10-14 06:13
good efficiency compressor
➡️ Reply
#Atlas Copco by ali boumlik on 2010-10-15 11:40
please send me the catalogue of elektroniken 2best ragard
➡️ Reply
#Atlas Copco by ravi saksena on 2010-10-17 18:44
Please send me the instruction/operation manual for Elektronikon IIbThanks in advance,With Best RegardsRavi Saksena
➡️ Reply
#Atlas Copco by darkhanbaatar on 2010-10-18 11:43
i need atlas atlas copco qix 30 schematic
➡️ Reply
#Atlas Copco by saad on 2010-10-20 09:54
Dears, I need a help for a failure massege of elektronikon panel which its part no. is (1900 0710 31). the failure massege is :22200000210000009820 3978 10 when i run this panel, this massege appears and remains in display without any change and no step done yet!please, advice me for this problem an...
Show More
➡️ Reply
#Atlas Copco by hadi shahbazi on 2010-10-21 11:21
hellowe have a ga55 atlas copco compressor with electronicon controller.on the display appear 100300000000 .please help us thanks
➡️ Reply
#Atlas Copco by edberto de lima gomes on 2010-10-21 22:46
gostaria do manual da elektronikon 2 pois tenho o compensor e ñ tenho manual do softwer
➡️ Reply
#Atlas Copco by nabil on 2010-10-24 12:41
alarm in GA 37 DEFAUT SYSTEM 20 * *PLEASE EXPLECATION
➡️ Reply
#Atlas Copco by SONATRACH ALGERIES on 2010-10-28 08:32
rtef w
➡️ Reply
#Atlas Copco by samir on 2010-11-03 14:30
atlas copco meilleur constructeur
➡️ Reply
#Atlas Copco by Lucio Roman on 2010-11-06 12:05
GA 160-10A
➡️ Reply
#Atlas Copco by Donald Jackson on 2010-11-09 13:59
requesting Installation, Operation & Maintenence manual for above specifically for the refrigeration side.
➡️ Reply
#Atlas Copco by Hoa Hoang on 2010-11-11 09:16
We have two Atlas Copco GA37Plus co-oper, change to other apter 20hours, but apter maintain only 01 compress. operation and 01 standby and its can\'t change.Please sent me documents detail for this system, machine no. API508418/508419
➡️ Reply
#Atlas Copco by Chris Benson on 2010-11-11 23:37
i would like copies (electronic if possible) for the GA15 compressor, SN 000882055, and the elektronikon I for GA15 air compressor SN 71120618040.
➡️ Reply
#Atlas Copco by basim onnab on 2010-11-15 10:13
i have compressor controller of elektronikon 1900 0700 08 and i need the procedure to program this type of controllersso pls if you can send me by email service manualthank youe.basim onnab
➡️ Reply
#Atlas Copco by amine on 2010-11-18 11:31
please would you mind sending me the manual user for atlas copco ZT110 regards
➡️ Reply
#Atlas Copco by surendra kumar shahani on 2010-11-18 11:50
Pls send to me, manual repair for compresso Atlas Copco ga55thanks
➡️ Reply
#Atlas Copco by Tarboosh on 2010-11-18 17:08
Atlas Copco is the famose air comp
➡️ Reply
#Atlas Copco by KUMARESAN.M on 2010-11-20 04:54
i am needing programming setting manual
➡️ Reply
#Atlas Copco by iqbal on 2010-11-23 05:28
Kindly provide detailed operation manual of the above controller. We have a same controller installed on our GA-45 compressor but your people did not provide the above manual alongwith it. With thanks in anticipation.
➡️ Reply
#Atlas Copco by manish srivastava on 2010-11-25 06:08
could you please send me compressor control panel manual elecktronikon
➡️ Reply
#Atlas Copco by Andrew on 2010-11-26 14:25
We need the ELEKTRINIKON II TECHINICAL AND USER MANUAL for corectly connect LAN to Modicon M340 ethernet TSP/IP (2 compressor blocks with dressers ZT75) . Thanks You
➡️ Reply
#Atlas Copco by Guillermo hernandez ornelas on 2010-11-26 15:40
ples iwork in siemens }we have 6 air compresor nad i have problem in one of them in this air compreso we have damege in a frecuency inverter the old frecuency inverter is somodrive and noe we put a frecuency inverter baldor but the problem is in the comunication betewn elektronicon II andfrecuency i...
Show More
➡️ Reply
#Atlas Copco by TAUSEEF on 2010-11-27 14:08
Dear service Manager we are using ATLAS COPCO COMPRESSOR GA 30,A MESSAGE IS APPEARING IN LCD THAT \"SYSTEM FAILURE 200\"PLS TELL ME THAT HOW I CAN REMOVE THIS ERROR ,PLS REPLY ME URGENTLY.THANKSTAUSEEF
➡️ Reply
#Atlas Copco by Peder Yang on 2010-11-29 07:12
My GA 50VSD has a Simens Simovert inverter. 6SE7031-5EF20-OBBO. I have an E message on the screen. According to the manual I need to replace CU board. Can you help?
➡️ Reply
#Atlas Copco by OSCAR VILLEGAS on 2010-11-29 17:51
i have a compressor ga 160 but i dont found its manual. reason why i was looking for one on web.thaksoscar
➡️ Reply
#Atlas Copco by M ASGHAR on 2010-11-30 08:32
I USE ATLAS COMPRESSOR I NEED Operation passwared PLEASE TELL ME
➡️ Reply
#Atlas Copco by m asghar77s on 2010-11-30 10:01
Dear Sir,We are using our stanter machine, a three nos. of your GA75air compressors for air delivery to our plants equipment.I have face more difficulties due to without trouble shooting user manual of klektronikon regulator. COPCO part no 1900-0700-03 CONTROL MODULE the it show passward plz tell me...
Show More
➡️ Reply
#Atlas Copco by Huynh Nhat Linh on 2010-11-30 17:18
Dear Sir,Please give me the connection Diagram, Manual and parameter of inverter Micro Master MM440 use in this CompressorThanks very much
➡️ Reply
#Atlas Copco by m kashif on 2010-12-01 05:59
Please send me details regarding oil change duration.
➡️ Reply
#Atlas Copco by alfredo flores on 2010-12-03 21:41
Buenas tardes les pido informacion sobre un compresor atlas copco el cual marca \"error sistema 200\" y ay que restablecer se revisoel equipo y no encontramos falla alguna que podriamos hacer lo empieza a maecar mas seguido gracias
➡️ Reply
#Atlas Copco by Ignacio Choque on 2010-12-05 15:17
I ned help for install module elektronikon.
➡️ Reply
#Atlas Copco by ASHRAF KHLIL on 2010-12-06 00:07
Electronikon II controller
➡️ Reply
#Atlas Copco by Humaid salim al-Mahrouqi on 2010-12-07 11:37
Dear Sir,I would like to know if your able to repaire MLVA unit for Noritsu machine model no 2901. If yes what is your coast of repair?regards,Humaid
➡️ Reply
#Atlas Copco by hung on 2010-12-12 11:39
Dear, from Singapore, we have 3 compressors. one machine GA22, serial ARP 778213, year 1991.now I need repair it, pls, send to me spec and datashet, wiring diagram for change main motor.thanks so much
➡️ Reply
#Atlas Copco by satishbhai on 2010-12-18 07:27
PLS SEND ME MANUAL
➡️ Reply
#Atlas Copco by nassim zouaoui on 2010-12-20 16:01
please send us the maintenance manual for atlas copco , oil type, frequency change, oil filter etc...
➡️ Reply
#Atlas Copco by sandeep on 2010-12-22 12:34
Sir,Madam,I have GA-75 model atlas copco make air compressor and it have electronikon make controller which are having problem , and it have showing only number on its display and this number is 100300000000 this nuber is blinking on this screen contineously so pl advice me how i can come to orignal...
Show More
➡️ Reply
#Atlas Copco by sandeep on 2010-12-22 12:39
Dear Sir,Madam,I want electronikon make controller Part no-1900 0701 04 technical manual , and its troubleshooting manual
➡️ Reply
#Atlas Copco by shailendra kumar gaund on 2010-12-22 14:28
hi i am asking u if u could please send me a copy of the operation and trouble shooting manual for the GA7 compressor . for elektronicon controller is truble . please send me trouble shooting manual.thanks & regards.shailendra kumar
➡️ Reply
#Atlas Copco by Gavin Theriot on 2010-12-23 14:52
looking for a manual or information on programming Elektronikon 1 on an Atlas Copco GA22 compressor. Thank you
➡️ Reply
#Atlas Copco by Mr. Surya Agussatria on 2010-12-25 04:35
Can I, to make resetting Regenerating and Pressuring Time atlas copco with Electronikon II, because default existing time is : Regenerating time 145 second and Pressuring Time 35 second. I want to set Regenerating time is 100 second, Can I?thanks.
➡️ Reply
#Atlas Copco by vaibhav on 2010-12-30 08:12
compressor GA30CFF does not start frm its electronicon 1 module
➡️ Reply
#Atlas Copco by Atul Kanakdande on 2011-01-04 08:48
i need engineering manual of Electronikon controller.
➡️ Reply
#Atlas Copco by Atul Kanakdande on 2011-01-06 04:38
I need Electronikon controller user manual
➡️ Reply
#Atlas Copco by Benjamin Gyasi on 2011-01-10 12:16
I write to request a user manual for Elektronikon control module for GA 55 Compressor.
➡️ Reply
#Atlas Copco by suratno on 2011-01-12 06:23
Main motor dont start....plase help me,your send Wirring electrical.thank...
➡️ Reply
#Atlas Copco by shainu.k.s on 2011-01-15 06:43
please send the electrical diagram of GA75
➡️ Reply
#Atlas Copco by kamal on 2011-01-15 16:23
je vaudrait logicel qui detect les pannes du elektronikon module avec la methode qui connect avec pc
➡️ Reply
#Atlas Copco by Hoa Nguyen on 2011-01-16 09:16
I am experiencing a high outlet temperature alarm which cannot be cleared, what do i do?
➡️ Reply
#Atlas Copco by Hoa Nguyen on 2011-01-16 09:19
Please, i need manual atlas copco GA55FF,GA75, GA100Thank you.
➡️ Reply
#Atlas Copco by jean birahim ndour on 2011-01-17 15:28
bonjour.j\'ai besoin du document technique du compresseur GA 75 ff en vu d\'une aide sur un mémoir de fin d\'étude que je prépare pour l\'obtention du diplome d\'ingénieur téchnologue et une bonne utilisation de données fillable et claires.Merci d\'avance.
➡️ Reply
#Atlas Copco by marko on 2011-01-17 22:10
Hy do you have service manual for model atlas copco ga22,i have problem i can not find some parts for it.regards Marko
➡️ Reply
#Atlas Copco by Tuan Phan on 2011-01-17 23:44
Hello,I have a Atlas Copco SF15 compressor, the display show 100400000000when power up and nothing else is funtion. what wrong with the controller or machine? Thanks,
➡️ Reply
#Atlas Copco by Osama Alhaj Ibrahim on 2011-01-19 13:43
Dear Sir: I need Atlas Copco ZT22 User ManualThanx
➡️ Reply
#Atlas Copco by sahaya bosco on 2011-01-19 15:17
GA37 make compressor running time convertor failure fault came also comprerssor totally tripped, why this fault came and how to rectify that fault?
➡️ Reply
#Atlas Copco by farid sumawan on 2011-01-20 02:59
Dear SirAtlas Copco has to work optimally with minimal maintenance costs. Reliability has been proven in operation since 1998. only now there are problems in controll system, and I need a manual for solving problemsThank\'s for your kind attention and look forwardregardsfarid sumawan
➡️ Reply
#Atlas Copco by amjad on 2011-01-20 08:52
we required Manuil Ga 90Thanks
➡️ Reply
#Atlas Copco by mohamed on 2011-01-20 18:56
I need spare parts , INSTRUCTION , AND MAINTENANCE list for air copressor ga 55plus , ga 55
➡️ Reply
#Atlas Copco by redha on 2011-01-23 05:34
hi pls..i need service manual for elektronikon controller MKIV, and initial reset stepsthank you
➡️ Reply
#Atlas Copco by dadang a on 2011-01-26 05:07
i\'m giving electrical diagram Atlas copco GA 11
➡️ Reply
#Atlas Copco by Roger Bouyea on 2011-02-01 15:36
Need parts manual for GA55 Compressor
➡️ Reply
#Atlas Copco by ABDUL RAZZAQ on 2011-02-02 06:51
please send me manual for ga75 and ga 810 manual
➡️ Reply
#Atlas Copco by ALBERTO MARTINEZ P on 2011-02-04 22:14
WANT THE MANUAL AND THE CODE OF PARTS OF THE COMPRESSOR GA 7 FOR REPAIRS THAT I WORK IN A MINING PLANT
➡️ Reply
#Atlas Copco by romeo pabaya on 2011-02-06 14:42
our ga 37 atlas copco no english version please send us thank you
➡️ Reply
#Atlas Copco by ASHOK PRADHAN on 2011-02-08 07:31
Sir,We need the complete manual for the subject unit.The Unit part & Sl. Nos are mentioed below for your reference .Part No. P1900520011Sl No. SRN0923A00246Kindle send on my mail id at the earliest possible.With regards,Ashok PradhanSenior Manager- EEI
➡️ Reply
#Atlas Copco by sujit on 2011-02-09 05:37
I need Spare parts manual for RFQ- GA55+ Compressor
➡️ Reply
#Atlas Copco by Bali on 2011-02-11 06:23
Could you please send as this document.
➡️ Reply
#Atlas Copco by benmerkhi on 2011-02-11 06:48
Please send us the regulator electric wiring diabgram of GA75.Kind regards
➡️ Reply
#Atlas Copco by alfonso garcia on 2011-02-11 21:34
electrican diagram electronicon please can help me whit this problem
➡️ Reply
#Atlas Copco by alfonso garcia on 2011-02-11 21:39
Good day gents!May we have a copy of the Elektronikon controller manual. Also the manual of the Elektronikon Input Module, we are having issues with the input from the dewpoint sensor.Many thanks....
➡️ Reply
#Atlas Copco by Rahul N Mankar on 2011-02-12 15:07
It\'s a wonderful product and it\'s installed in my company. The service engineer who did the maintenance today that\'s 12/02/2011 in our company was awesome and i would be very happy if you cab please send me the complete working & diagrammatic representation of the GA55VSDFF screw compressor.
➡️ Reply
#Atlas Copco by thein than oo on 2011-02-13 00:20
the display showed the inop and cannot run the unit.
➡️ Reply
#Atlas Copco by md sohel on 2011-02-13 00:59
i need operation and maintenance manuals. olso spare part list.
➡️ Reply
#Atlas Copco by Tafheem on 2011-02-13 19:25
dear sir.we need manuals of ATLAS COPCO GA55FF(micro master) for maintenance puropose.Kindly do this favor and provide if possibility is there through soft copy via email.thanks
➡️ Reply
#Atlas Copco by nikhil on 2011-02-14 16:22
we r using atlas copco compressor from last 10 years.
➡️ Reply
#Atlas Copco by renald lemire on 2011-02-23 00:34
the companie bought a unit a used one do not have any book to verify the maintenance on the unit.serial number a 11-229803 Iwill appreciate if you can send me a manuel. thanks.
➡️ Reply
#Atlas Copco by ZIED SAKHRIA on 2011-02-23 10:33
I have an issue with my compressor and i need the electrical drawing, the screen is black.
➡️ Reply
#Atlas Copco by agus fiantony on 2011-02-24 16:03
we have compresor atlas copco GA37FF++and not available manual book with catalog sparepartplease thank you
➡️ Reply
#Atlas Copco by SRINIVAS J on 2011-02-26 15:57
ATLAS COPCO IS VERY GOOD COMPANY
➡️ Reply
#Atlas Copco by SRINIVAS J on 2011-02-26 16:06
GA55 COMPRESSOR ELEMENT OUT LET TEMPERATURE 30C TRIPPING COMPRESSOR
➡️ Reply
#Atlas Copco by srinivas on 2011-02-28 04:40
Dear sir,Please help me out of this issue i am unable to trace out this problem in your Electrical diagram, Hence i request you to send me Electrical diagram of GA 55 compressor.thanks & regards,J Srinivas jammulasrinivass@gmail.com9440867602
➡️ Reply
#Atlas Copco by srinivas on 2011-02-28 06:31
Dear sir,Please help me out of this issue i am unable to trace the problem send the manual GA 55+thanks & regards,J Srinivas jammulasrinivass@gmail.com9440867602
➡️ Reply
#Atlas Copco by DKIOUAK on 2011-03-01 12:21
bonjourVeillez m\'envouyer le manuel d\'utilisation et de maintenance du compresseur GA 30 Atlas copco.Bien cordialement.
➡️ Reply
#Atlas Copco by mohammed on 2011-03-03 12:36
Dear Sir We are purchase Air compressor from Atlas Copco GA37. we need to Know the meaning of all error message coming in the ElectronicII Screen and How to fix it? . I wait for your response as quick as possibleKindest RegardsElectrical EngineerMohammed AliSulphonia companySudan-Khartoum
➡️ Reply
#Atlas Copco by h on 2011-03-11 03:32
Dear Sirs,Please send to me on e-mail manual for Elektronikon I.Best regards.
➡️ Reply
#Atlas Copco by Gunawan s on 2011-03-14 06:12
problem when mesin on any comant inverter convert timw out
➡️ Reply
#Atlas Copco by Ban on 2011-03-14 09:28
Please send it to me
➡️ Reply
#Atlas Copco by mohamed lakhal on 2011-03-15 14:12
i want the manuel afficheur electronicon
➡️ Reply
#Atlas Copco by dulan on 2011-03-16 17:27
it is world no 1
➡️ Reply
#Atlas Copco by milenko markotic on 2011-03-17 18:49
PLEASE IS IT POSSIBLE TO GET WIRING DIAGRAM FOR THIS KOMPRESOR
➡️ Reply
#Atlas Copco by nguyen tran duy on 2011-03-18 05:41
Repair manual
➡️ Reply
#Atlas Copco by mitiku on 2011-03-19 11:57
We have new GA7 FF atlas copco compressor wth storage tank of 1000lt. capacity. We don\'t have user maual for thsi comoressor.please help me
➡️ Reply
#Atlas Copco by Dejuan Torrence on 2011-03-23 11:08
I need a manual or info on a ga50vsd reading convertor failure
➡️ Reply
#Atlas Copco by Gopal on 2011-03-26 01:26
GA 75 Atlas Copco troubleshooting manual
➡️ Reply
#Atlas Copco by ajit on 2011-03-30 05:50
Dear Sir/Madam ;we have GA7 and GA7FF Compressors. We need this units\' documents as soon as possible. Please send me GA7 and GA7FF Compressors\' Installation Operation and Maintenance Manuals.Waiting for your reply as soon as possibleBest Regards,Ajit kumar
➡️ Reply
#Atlas Copco by salah on 2011-04-01 08:13
plz is the following item available till nowelektronikon p/n:1900 0700 08 s.n:0201150007924vac/18va
➡️ Reply
#Atlas Copco by AMJADYAC on 2011-04-02 14:26
THANKS FOR ALL
➡️ Reply
#Atlas Copco by ThanhDat on 2011-04-03 07:38
Dear service Manager!We are using Atlas Copco Compressor GA 15, A MESSAGE IS APPEARING IN LCD THAT \"SYSTEM FAILURE 200\"PLS TELL ME THAT HOW I CAN REMOVE THIS ERROR ,PLS REPLY ME URGENTLY.THANKS
➡️ Reply
#Atlas Copco by udaya on 2011-04-05 02:38
Dear Sir,Please send me Elektronikon controller manual.
➡️ Reply
#Atlas Copco by Jhoan Rodriguez on 2011-04-07 13:48
El panel me muestra un error 11 y no logro identificarlo, podrìan enviarme el catalogo de fallas.Gracias
➡️ Reply
#Atlas Copco by Eric Perkins on 2011-04-08 10:54
I have an Elektronikon unit that has lost its memory and programming. Would you be able to assist in repairing and reprogramming.
➡️ Reply
#Atlas Copco by Rakesh K Sharma on 2011-04-10 05:23
I have two units Screw Compressor Atlas copco GA 22 & one GA 45There is problem in the electrical.I need an wiring electrical for compressor Atlas Copco GA 22,And elektronikon 1 controller manual.please send me to wiring electrical & manualBest Regards,Rakesh SharmaIndag rubber.ltdNalagarh,S...
Show More
➡️ Reply
#Atlas Copco by haythem on 2011-04-10 11:56
hello,please I have compressor atlas copco ga 11 ff but I dont have the electrical manuel and mecanical manuel and manuel user please can you send me manuel .
➡️ Reply
#Atlas Copco by Antonio Gomez on 2011-04-13 15:47
I need an electronic manual (pdf) of Atlas copco ga 15 compressor.I want to know if you can help me to find a link for donwload the file or if you can support me.Thanks.
➡️ Reply
#Atlas Copco by mohamed didi on 2011-04-16 10:39
dear sir.please send me you r oparation manual fo elektronikon IIthankyou.
➡️ Reply
#Atlas Copco by Miroslav Virok on 2011-04-18 09:27
Comunikation manual Elektrikom 2.Thamks
➡️ Reply
#Atlas Copco by Elson Carvalho on 2011-04-19 11:22
How can I repair this alarm???
➡️ Reply
#Atlas Copco by Syaiful Bachri on 2011-04-20 08:47
I have two Compressor Atlas Copco GA.37, and operation 1998 until now.I think series GA.37 very good. I need Manual Book & Part list because my book lose, so i need you for that.
➡️ Reply
#Atlas Copco by DIPEN GHANTI on 2011-04-22 11:19
I need web mannual for Atlas Copco GA160 Compressor.Regards,D.GhantiDGM- Mechanical
➡️ Reply
#Atlas Copco by Sergio Tusen on 2011-04-28 15:21
Buenas Necesito conseguir el manual de uso de el Display Elektronikon para un compresor de Tornillo mod. GA55.
➡️ Reply
#Atlas Copco by Rizwan Patel on 2011-04-29 06:38
Please send me the manual of abb make vsd used in zr160
➡️ Reply
#Atlas Copco by Nikesh Raut on 2011-05-02 04:55
I need an electrical Drawing of Atlas Copco make Compressor model GA 160 .Kindly arrange as soon as possible
➡️ Reply
#Atlas Copco by virenderm mudgil on 2011-05-04 13:43
pl give the solution for vsd 37 compressor fault - oxfa31.
➡️ Reply
#Atlas Copco by AHMED on 2011-05-05 07:42
Dear Sir/Madam ;we have GA7 Compressors. We need this units documents as soon as possible. Please send me GA7 Installation Operation and Maintenance Manuals. HOW WE CAN RUN UNITWaiting for your reply as soon as possibleBest Regards,AHMED HASHAM
➡️ Reply
#Atlas Copco by KARIM NAJEM on 2011-05-05 12:56
DEARKINDLY CAN YOU SUPPY ME GA7 MAINTENANCE MANUAL. I AM WAITING YOUR REPLAY.BEST REGARDSKARIM
➡️ Reply
#Atlas Copco by ibrahim santos on 2011-05-08 14:03
sir im sales engineer in my co.ecrase international co.medical divisioni send letter to you because my co.have contract to another hospital in qatar but all brand from atlascopco compresor/vacuum i wont to learn how to repair or i need certificate us medical gases tech my question is were school igo...
Show More
➡️ Reply
#Atlas Copco by Rico on 2011-05-10 03:39
Dear Alats Copco!If you have GA 200 Compressor User manual, please send me for my study. Thanks a lots
➡️ Reply
#Atlas Copco by george on 2011-05-10 07:16
the module on condition only display back light glow.no message displayed
➡️ Reply
#Atlas Copco by Piotr on 2011-05-10 15:54
Good day,I\'m chief engineer on the vessel and I have new Atlas Copco compressor on board, type GAP26P whit graphical display. Because I use this copressor for control air, I would like to activate the automatic restart function. Unfortunately there is some password. Can I recive this password by e-...
Show More
➡️ Reply
#Atlas Copco by waleed on 2011-05-11 16:27
we need wiring diagram of xams 856
➡️ Reply
#Atlas Copco by Fan on 2011-05-12 09:14
AIR COMPRESOR
➡️ Reply
#Atlas Copco by lang tu on 2011-05-13 22:20
Dear Madam/Sir,I would like to know the service manual of Air comp Atlas copco GA55.Thank very muchLang tu
➡️ Reply
#Atlas Copco by Basavaraja H on 2011-05-14 07:32
The Atlas copco is very good in operation we purchsed second handle from beljium & specification as follows GA10, Sr.No 125294, 11KW, BELJGIUM MANUFACTURER & Cubicle Type : 1900-2000-54-ed02, Sr.No-207801, Please send us the Electrical drawing asap we are awaiting for your feedback.
➡️ Reply
#Atlas Copco by saeod on 2011-05-14 19:59
for univercity
➡️ Reply
#Atlas Copco by rachidiourabah@yahoo.fr on 2011-05-14 21:24
verie good
➡️ Reply
#Atlas Copco by Changdev Markad on 2011-05-16 12:35
dear sir,we are facing a lading problem in our GA 45+ compressor .On the screen is showing the loading but actual presser is not develop , because 110 v/Ac supply is not getting to the load and unload solenoid coil.Pls sugest the possiblecause for the same and also send me the Electrical manual for ...
Show More
➡️ Reply
#Atlas Copco by Gerry Oberst on 2011-05-18 15:24
Need manual in order to service the compressor properly.
➡️ Reply
#Atlas Copco by Jordi on 2011-05-19 14:19
I need this manual,Thanks,Jordi
➡️ Reply
#Atlas Copco by Madushan on 2011-05-20 07:52
I NEED SERVICE & OPERATING MANUEL FOR ATLAS COPCO GA55 THANKS.
➡️ Reply
#Atlas Copco by ibraheem megahed on 2011-05-20 12:05
We have a Atlas Copco GA 18 FF w/ Elektronikon ll control. But we have no manual for the Elektronikon control. Could I get this on pdf file?
➡️ Reply
#Atlas Copco by Ranjan Bhadra Kumar on 2011-05-20 15:21
Dear Sir,Pl. send parts catalogue for GA 11 AEL 11 FF, sl. no. PNA 601749 to identify some parts for the compressorRegardsRanjan Bhadra Kumar
➡️ Reply
#Atlas Copco by Muhadhir Baba on 2011-05-22 06:21
Request GA75 AIR COMPRESSOR MANTENANCE MANUAL
➡️ Reply
#Atlas Copco by CHRISTIAN on 2011-05-23 04:49
contoller mod 1900 0700 07
➡️ Reply
#Atlas Copco by Randy Deel on 2011-05-23 20:16
I would like to have an error code list for the DM45.ex. 157FMI18
➡️ Reply
#Atlas Copco by dhayalan on 2011-05-26 06:50
sir please send wiring diagram of elektronicon ii related to atlas capcoga 22 + compressor. with best regardsdhayalan
➡️ Reply
#Atlas Copco by dhayalan on 2011-05-26 06:53
sir, please send the manual of elektronicon ii to service atlas capco compressor.thank youwith regardsDhayalan+91 9952760682
➡️ Reply
#Atlas Copco by barhoumi on 2011-05-26 20:55
le meilleur marque international
➡️ Reply
#Atlas Copco by ARUN KUMAR SRIVASTAVA on 2011-05-28 13:17
Pl send me immediately the detail part nos. of Manual of GA 55 AWP.
➡️ Reply
#Atlas Copco by Suthaimer Andrey on 2011-06-01 09:16
Dear Sir ,We need insruction Manual on English or Russian language for compressor Atlas Copco type GA-11 FF .Best RegardsAndrey Suthaimer
➡️ Reply
#Atlas Copco by S. Natarajan on 2011-06-01 13:17
Request both Instruction Manual and Spare Parts Manual for GA55 Air Compressor
➡️ Reply
#Atlas Copco by Guillermo H Guzman on 2011-06-02 14:47
The Elektronicon card was broken. I need to repalce it
➡️ Reply
#Atlas Copco by hossam on 2011-06-03 09:03
The only thing that show up on the display is 110200000000on atals compco comp.model ZT132
➡️ Reply
#Atlas Copco by OTOVWE ISAAC on 2011-06-06 12:17
I require the technical manual for GA 18 F, please
➡️ Reply
#Atlas Copco by iur on 2011-06-08 09:39
ELECTRONICON MK 5
➡️ Reply
#Atlas Copco by mohamed didi on 2011-06-08 12:54
dear sirhow proraming compressor end manulthanks
➡️ Reply
#Atlas Copco by jose guillen on 2011-06-08 16:04
we need the manual of elektronikon II to setup the time of max pressureand tme delay to start. my compressor model ga37ff and serial AII383564 year of manufacture 2003.
➡️ Reply
#Atlas Copco by Azeddine Harkati on 2011-06-09 15:41
manual of atlas copco
➡️ Reply
#Atlas Copco by ntk on 2011-06-11 17:57
please give me manuals of ATLAS COPCO AIR COMPRESSOR GA132W-8, sequence control ES-10A, Atlas Copco 1089-0515-07
➡️ Reply
#Atlas Copco by ejaz ayub on 2011-06-12 07:35
hello sir,i am using GA 90 compressor. earlier i upgradaed my compressor and replaced old control module with new Electronikon but i did no receive any catalouge or operating manual with this. could you please send me a complte manual for above module,best regardsejaz ayubelectrical engineer
➡️ Reply
#Atlas Copco by taufik on 2011-06-13 08:22
please give me part list book
➡️ Reply
#Atlas Copco by Charmaine on 2011-06-13 12:05
we need the wiring for the pannel
➡️ Reply
#Atlas Copco by TAMER on 2011-06-14 16:22
we need a manual for atlas copco GA75 electronikon
➡️ Reply
#Atlas Copco by virginia on 2011-06-15 07:28
Necesitaria el manual de usuario de un compresor GA 75
➡️ Reply
#Atlas Copco by faisal on 2011-06-16 06:59
Dear,Need the above mentioned spare parts list.ThanksFaisalTechnical Manager
➡️ Reply
#Atlas Copco by satishbhai on 2011-06-16 10:21
pls send me catlogue oil pipe parts no we require
➡️ Reply
#Atlas Copco by SAFAE HIBA on 2011-06-16 23:33
j\'aime atlas copco
➡️ Reply
#Atlas Copco by ravi on 2011-06-20 06:45
Dear sir,we have air comp. GA22 with electronikon panel . we are not able to run the comp. because no any key on panel accept data. when we power up the unit there is warning message , emergency button closed, when we try to reset it is not reseting. please advice.thanksRAVI
➡️ Reply
#Atlas Copco by elvis gonzalez on 2011-06-21 15:01
Need parts lis manual for this compressor , can you help me with this?
➡️ Reply
#Atlas Copco by tasman on 2011-06-26 03:50
atlas copco is the best quality
➡️ Reply
#Atlas Copco by tahir on 2011-06-26 09:20
repair of electronic controll unit atlas copco ga 90
➡️ Reply
#Atlas Copco by Percy A. Filho on 2011-06-29 19:18
Gentlemen I am with master drive vc presenting following menssagen ff10
➡️ Reply
#Atlas Copco by percy villanes ccala on 2011-07-02 17:54
Manual de opercion y mantenimiento del compressor GA55VSD type: GA55VSD nº: API57763275 HP
➡️ Reply
#Atlas Copco by nadher on 2011-07-06 06:10
how can i reset the unit if the compressor shutdown due to rising outlet temperatur
➡️ Reply
#Atlas Copco by manjit singh wazir on 2011-07-09 11:24
just need servise manual and electrical diagram we have two compressor of GA 90 regards
➡️ Reply
#Atlas Copco by ahmed alebrashy on 2011-07-11 16:32
we want some data from the manual of atlas copco ga 37
➡️ Reply
#Atlas Copco by Tejas on 2011-07-13 02:02
I am facinga problem since last many days about wiring details in my instrument laboratory.So,please arrange to send me a complete manual for our maintenance purose of view.
➡️ Reply
#Atlas Copco by Jon Marie on 2011-07-13 15:33
I\'m in need of a operator and maintenance manual for a Atlas Copco GA 37.
➡️ Reply
#Atlas Copco by james mulqueen on 2011-07-13 19:58
machine trips from time to time with same fault convertor motor timeout need to know possible causes please have checked usual things rmba unit and cables crc counters count in units of 1on a only. turn power of and these reset some help please
➡️ Reply
#Atlas Copco by Mubasher Mehmood Khan on 2011-07-13 20:24
Dear Sir/Madam,i have tow screw Air Compresseres of Atlas Copco GA-37, i need spare for this compressor butt i have no geniune part numbers for demanding there for it is kindly request send my manual which have complete spare or operation component list. I am giving data which write on compressor gi...
Show More
➡️ Reply
#Atlas Copco by janakiraman on 2011-07-15 09:09
warranty period
➡️ Reply
#Atlas Copco by janakiraman on 2011-07-15 09:11
COMPRESSOR DRIER BREAK DOWN & AUTO DRAIN VALVE MALFUNCTION
➡️ Reply
#Atlas Copco by John Blanco on 2011-07-18 06:17
I need a manual for this elektronikon with part number 1900 0700 05 and the standard code of it. I hope there\'s someone can help my problem.
➡️ Reply
#Atlas Copco by John Blanco on 2011-07-18 06:25
Good day Sir! I need a manual for this item Electronikon with part number 1900 0700 05. And also the standard code of it. I hope you can help and solve my problem sir.Respectfully yours,John BlancoJNR International Trading
➡️ Reply
#Atlas Copco by LE MINH DONG on 2011-07-20 06:56
Dear,Pls sent to me Maintenance Manual of Atlas Copco, model GA55.Thanks.
➡️ Reply
#Atlas Copco by LE MINH DONG on 2011-07-20 06:58
Dear Sir/Madame,I have bought Compressor Atlas Copco GA55. Would you pls sent to me a manua repair in details for this model.Thanks.
➡️ Reply
#Atlas Copco by mike geary on 2011-07-20 22:32
Please send manual as PDF for Atlas Copco Compressor GA55, thank you.
➡️ Reply
#Atlas Copco by george kwaramba on 2011-07-21 15:25
Good service so far
➡️ Reply
#Atlas Copco by arturo nava on 2011-07-25 20:42
would you help me to get the GA 22 Manualthanks in advance
➡️ Reply
#Atlas Copco by Bing Lopez on 2011-07-27 01:22
GA 75 Electronikon II controller module presently instlled was bug down and the parameters of the compressor can not be seen at the display monitor
➡️ Reply
#Atlas Copco by Pierre Vermeulen on 2011-07-27 12:54
Ive purchaced a GA7FF Machine without installation manual or service manualPlease help
➡️ Reply
#Atlas Copco by Mike de Beer on 2011-07-29 09:59
Please could you assit wit a full set of drawings for a Atlas Copco GA 37 ff compressor 525volt Electrical and Mechanical
➡️ Reply
#Atlas Copco by ruban on 2011-08-01 20:16
we have ga 15 atlas compresser. please sent a service manual.
➡️ Reply
#Atlas Copco by Michael on 2011-08-04 04:27
I have a GA10. 1998 model. The elektronikon board has a fault code 102 on the board. What does this mean as the machine will not run.
➡️ Reply
#Atlas Copco by Faramarz Parand on 2011-08-04 10:39
Dear Sir/madamwould you please send me manuals about safety, opration, preventive maintenance, and repair of Model GA55 + FF in English,Russian, and persian.thank you.
➡️ Reply
#Atlas Copco by Engr. Solomon Ogagavwodia on 2011-08-04 16:58
electric wiring tampered with
➡️ Reply
#Atlas Copco by JOSE EMMANUEL PEREZ MTZ on 2011-08-05 16:37
GOOD MORNINGWE NEED SUPPORT A TECHICAL MANUAL FOR COMPRESOR GA55FF TANKS
➡️ Reply
#Atlas Copco by Natarajan Subbiah on 2011-08-09 12:33
Request you to send me the copy of Spare Parts list for GA55 Compressor, Atlas Copco make.
➡️ Reply
#Atlas Copco by Jneinalsi on 2011-08-09 15:21
Hi! Is there something interesting?
➡️ Reply
#Atlas Copco by Hoang Thanh Tung on 2011-08-12 03:29
Dear Sir/Madam ;we are using yours GA7FF Compressors. We need this units\' documents as soon as possible. Please send me GA7FF Compressors\' Installation Operation and Maintenance Manuals.Thanks and best regard.
➡️ Reply
#Atlas Copco by OSCAR MARTINEZ on 2011-08-15 19:09
ACTUALMENTE TENEMOS UN COMPRESOR ATLAS COPCO, ELECTRONIKON 11, EL MISMO ESTA INSTALADO EN UN TALLER DEL CANAL DE PANAMA, TENEMOS PROBLEMAS CON EL MISMO, Y EL MANUAL QUE TENEMOS SOLO INCLUYE EL ELEKTRONIKON I.
➡️ Reply
#Atlas Copco by NICOL on 2011-08-16 07:04
Dear Sir,Please send us manual above said subject for spare parts ordering .This compressor is used for air command on board PASCAL PAOLI ship built in VAN DER GIESSEN DE NOORD Shipyard (hull6088). We have also LT 1230 KE installed for starting air bottles.Thanks & regards
➡️ Reply
#Atlas Copco by prosper Amedume on 2011-08-19 19:17
please kindly send me the detailed manual Atlas Copco industrial compressor. hank you
➡️ Reply
#Atlas Copco by Sergio Pacheco on 2011-08-19 21:11
One compresor GA75 display the Error E2what is the problem?can you help me?thank
➡️ Reply
#Atlas Copco by ashraf ali on 2011-08-21 16:36
plese send complete user manual inverter&plc
➡️ Reply
#Atlas Copco by gabriel on 2011-08-22 17:14
i need electrical diagram for elektronikonll
➡️ Reply
#Atlas Copco by Frank Yap on 2011-08-24 05:42
my GA15FF compressor will not start, the warning light will keep on blinking. what would be the trouble. Would you mind to send me the manual of electronikon I, and also the operator and maintenance manual for this compressor. thanks.
➡️ Reply
#Atlas Copco by Luis Alcantara on 2011-08-24 16:18
Hi my name is Luis and i need a manual of elektronicon mk4 and mk3 for specifications of the compresor and display thankz for ur help
➡️ Reply
#Atlas Copco by Emmauel Jiokeng on 2011-08-25 10:07
Dear sir or madammy atlas copco master card ( Elecktronikon MKIV controller A/B 163423C REV ) has a problemin fact there is nothing displaying.I open it and noticed that on this card and electronic component (19 pins plastic dual in-line packages ) hasflash and I can not read the reference on it ;pl...
Show More
➡️ Reply
#Atlas Copco by Daniel Goarnisson on 2011-08-28 11:02
Please, can you send me the spare parts and maintenance manuals for compressors Atlas copco Type GA 75 P, S/N AP1610227 to 229. Thanks and best regardsDaniel
➡️ Reply
#Atlas Copco by PHAM HAI on 2011-09-01 04:30
Dear Sir, I am from VN, I have one machine Ga22 ( year 2001)now, controller alarm: system failure 11 & 104. machine can not run.I turn off the power and turn on but machine can not run!Pls, tell me, what must I do?Thanks & best regards,
➡️ Reply
#Atlas Copco by B VENKANNA on 2011-09-02 10:19
ERROR CODE 110300000000 FOR ZR250 COMPRESSOR.iF ANY IFORMATION REQUIRED PLEASE CONTACT MY E-MAIL ID
➡️ Reply
#Atlas Copco by hmd on 2011-09-08 10:05
Dears,I need a help for a failure massege of elektronikon panel which its part no. is (2906 0595 05). the failure massege is :22200000210000009820 3978 10when i run this panel, this massege appears and remains in display without any change and no step done yet!please, advice me for this problem and ...
Show More
➡️ Reply
#Atlas Copco by David Downes on 2011-09-08 14:28
Electronikon shows converter failure 001.Siemans drive shows F0001. I was told that is motor failure.Test motor w/ 500 volt megemeter. showed no leakage to ground.Tested w/ ajustable AC Volt induction meter, trips @ 1700 volts / 10 meg ohms also trips trips @ 500 volt / 3 meg ohmsPulled fan cover, m...
Show More
➡️ Reply
#Atlas Copco by gerson on 2011-09-11 21:45
Saber el funcionamiento del compresor
➡️ Reply
#Atlas Copco by Jesus Lara on 2011-09-13 22:28
we need some manual parts for repair this equipment?, you can help us and send us for this email, thanks
➡️ Reply
#Atlas Copco by Mario Hernandez on 2011-09-14 17:35
Good afternoon! I’m written from Plasticos Bandrex. I want information from flexographic machine, which is communicated by eltromat system and longitudinal register.Wiedeg elektronikArt. Nr. 4706122Bez mlbr prozessor karter Znr. 652.029/1.1 I wait for your information as soon as possible Best regard...
Show More
➡️ Reply
#Atlas Copco by Mario on 2011-09-14 18:02
Can yo let me know if some body speak spanish? I need information about electronic cards for a flexographic machine MLBR.Do you have branchs in Mexico
➡️ Reply
#Atlas Copco by FAUSTINO SANDREA on 2011-09-16 15:38
Se nos daño el modulo de control
➡️ Reply
#Atlas Copco by Ashish Sharma on 2011-09-19 11:42
We urgently need atlas Copco parts manuals for GA/ZA/ZR/ZT. Compressors please E-mail at hydroair@rediffmail.comWe can supply Compressor parts for Atlas Copco/Ingersoll-Rand,Elgi,Kaeser,Kirloskar,Khosla,Chicago Pneumatic.
➡️ Reply
#Atlas Copco by bayu pratamap on 2011-09-20 01:26
dear,May you give us some informations about manual operation and connection from elektronikon II for our part elektronikon II.Thank you
➡️ Reply
#Atlas Copco by Nadid Burbar on 2011-09-22 16:53
Hi Pls I need your help to resolve an alarm problem on GA7 Atlas Copco compressor .I have a message on display (oil separeter) and alarm red led blincking how can I solve this fault. Pls send me an information on Email :- nadid_elpal@yahoo.comBest Regards Nadid BurbarElectro Teck co.
➡️ Reply
#Atlas Copco by supria on 2011-09-23 10:33
I NEED SERVICE & OPERATING MANUEL FOR ATLAS COPCO GA55THANKS.
➡️ Reply
#Atlas Copco by Mark Markunas on 2011-09-28 16:02
I need a manual for the elektronikon II control to make some changesTHANKS!Mark
➡️ Reply
#Atlas Copco by Noel L. Fuensalida on 2011-09-29 08:24
Hi,Could you help me to give an exact information regarding our problem on our unit Atlas Copco Aircompressor GA30VSD.because currently we encountered an error of 100400000000.Regards,Noel L. FuensalidaZeller Plastik Phil.+639283132159
➡️ Reply
#Atlas Copco by N.GOPISANKAR on 2011-09-29 09:18
GA 30 VSD MODEL ATLAS CAPCO COMPRESSOR ELEKTRONIKAN 2 DISPLAY SOS\" COMPRESSOR MOTOR CONVERT TIME OUT\"
➡️ Reply
#Atlas Copco by VIJAY.M on 2011-09-30 11:30
WE ARE VERY HAPPY WITH PRECISE PERFORMANCE WITH GA18+ MODEL
➡️ Reply
#Atlas Copco by ashish sharma on 2011-10-02 07:09
we can supply all parts for atlas copco please E-Mail at hydroair@rediffmail.com
➡️ Reply
#Atlas Copco by ivan on 2011-10-04 05:59
please tell what should to do of alarm 110200000000 in display on air compressor atlas-copco, thank you
➡️ Reply
#Atlas Copco by Kabiru ajetunmobi on 2011-10-06 12:09
I been working on atlas copco compressor since 10 year the product is very good in nigeria
➡️ Reply
#Atlas Copco by Francisco Partida on 2011-10-11 15:04
To whom it may concern, I have a problem wiht an Atlas copco compressor. It apears a message:System Failure 200The compresor does\'t start and it seems it is in mannual opperation. Do you know what happens?Regards Francisco Partida Molina
➡️ Reply
#Atlas Copco by T.Suresh on 2011-10-12 06:05
Respected Sir/Mam,I want manual of Atlas Copco GA 55+in English language.
➡️ Reply
#Atlas Copco by Bradford Tassoul on 2011-10-13 15:44
detailed manual of Elektronikon
➡️ Reply
#Atlas Copco by amar nath chanda on 2011-10-14 15:07
I need controller manual to know the symbol used in controller. like a diagonal arrow in a square box.
➡️ Reply
#Atlas Copco by MOHAMED MEERAN on 2011-10-15 17:43
Dear Sir, I am working as Maintenance Engineer in Qatar Petroleum. We are having Atlas Copco GA-7 air compressor in production lab. Recently we are shifting to this new location and going to recommission next week. Now we are facing difficulties in commissioning due to non availabilty of user and ma...
Show More
➡️ Reply
#Atlas Copco by jay michael deodoro on 2011-10-22 05:04
please send me user manual and schematic diagram of elektronikon p/n:1900 0701 23s.n:0698 2800 149ed:0024vac
➡️ Reply
#Atlas Copco by Ragil.samidi on 2011-10-23 09:31
Atlas Copco is best Air compressor on my field.would you please send me repair manual for XATS 125.regardragil s
➡️ Reply
#Atlas Copco by mohamed kandil on 2011-10-24 08:16
i have ZR-250 compressori have worning condensate drain RC out not ok and zr-160 compressorelement frist tempr maximum 227 cmax = 225
➡️ Reply
#Atlas Copco by Gajanan Ambekar on 2011-10-25 09:21
Kindly provode us the autorise dealer for our requirment of Regulator 1900 0710 12 for ATLAS COPCO GA 55 COMPRESSORPlease forward us technical details , working for this regulator.Thanks & regards,Gajanan P. AmbekarExecutive – MBD MaterialsMukand LtdThane – Belapur Road,Dighe, Thane India 400605...
Show More
➡️ Reply
#Atlas Copco by muhammad Frazier on 2011-10-25 10:55
Please send us a booklet of this unit.
➡️ Reply
#Atlas Copco by K. Nageswara Rao on 2011-10-28 10:51
Technical specifications for GA7FF Atlas Capco Air compressor please
➡️ Reply
#Atlas Copco by saeid on 2011-11-06 16:05
please tell\" what is it?sincerely yourssaeid-n
➡️ Reply
#Atlas Copco by Nadid Burbar on 2011-11-08 13:52
Hi Srplease I need your help to solve a problem on Atlas Copco compressor GA7 .The Problem that the compressor did\'nt start and I have no alarm on display Please if you can send me the electric diagram and the service manual.Best RegardsNadid BurbarELECTRO TECK conadid_elpal@yahoo.com
➡️ Reply
#Atlas Copco by S.banerjee on 2011-11-11 12:30
I need the elekctronikon control system manuel
➡️ Reply
#Atlas Copco by S.Banerjee on 2011-11-11 12:43
Please, it can send me a version recent envelope the technical manual of Elektronikon II
➡️ Reply
#Atlas Copco by henry on 2011-11-15 08:19
hi , i \'m just sure that the advanced elektronikon copco monitor show the code 1030000000 is\'t program lost ?
➡️ Reply
#Atlas Copco by Muhammad Murtaza on 2011-11-20 14:22
Required manuel elektronikon controller
➡️ Reply
#Atlas Copco by Dejan Cvetkovic on 2011-11-21 14:08
Dear sirs,We have Atlas Copco compressors:GA37 PNA 510756GA55GA75GA75ff-PNA 510744Please on the last one differential pressure exceed 4bar in LOAD regime and become***** till unload phase when falling to 0,8 Bars.Service suppose to have changed month ago Oil separator filters.Is it possible that sep...
Show More
➡️ Reply
#Atlas Copco by khalid on 2011-11-26 11:15
my compresseur GA 18 cant start and write failure 200
➡️ Reply
#Atlas Copco by khalid on 2011-11-26 11:26
Bonjour, Je suis un agent technique travaillant à RADEEF FES MAROC et j\'ai un problème sur le compresseur Atlas Copco GA18: le module Electronikon m\'affiche : défaut système code erreur 200 et je n’arrive pas à résoudre le problème.Je viens vous demander de bien vouloir m\'orienter à trouver la so...
Show More
➡️ Reply
#Atlas Copco by Pierre on 2011-11-30 12:06
I need some information on a GA7 FF compressor settings and fault finding on machine
➡️ Reply
#Atlas Copco by ramon palaca on 2011-12-05 08:14
Good day and peace to all...Dear Sir,Pleased to request a manual for atlas copco GA-55 model,we are currently doing PM on our machine andwe need to identify the parts to purchase. And we need to knowhow to dismantle the element/air end step-by-step.appreciate so much your help.thank you and god bles...
Show More
➡️ Reply
#Atlas Copco by justilio pereira on 2011-12-05 12:08
I have a unit Screw Compressor Atlas copco GA 22.There is problem in the control card electrical.I need an wiring electrical for compressor Atlas Copco GA 22,please send me to wiring electrical.
➡️ Reply
#Atlas Copco by Duc chien on 2011-12-06 09:20
I\'m finding GA55\'s diagram but I haven\'t find not yet can you help me thanks!
➡️ Reply
#Atlas Copco by Juergen Mirau on 2011-12-06 12:43
Machine: CompressorMachine type: GA5FF7,5Serial Number: AII111204Manufacturing Year: 1996User: Stadtbaeckerei Engelbrecht, GermanyPlease be so kind and send for the above mentioned compressor a manual including safety regulation.Many thanks for your help.Kind regardsJuergen MirauB&M Consulting G...
Show More
➡️ Reply
#Atlas Copco by faisal on 2011-12-07 11:07
part no 1900.0590.73.ed.04i find out error e2
➡️ Reply
#Atlas Copco by FADI cHIHADI on 2011-12-08 14:53
Dear Sir,I bought a second hand compressor and i get your local agent in lebanon to get the 8000 hours maintenance. the compressor is used for printing machine manroland 704.while the compressor is running it shuting down by itself. the fault message is In french language ARRET DEF..this issue is no...
Show More
➡️ Reply
#Atlas Copco by DIESEL ELECTRIC on 2011-12-19 13:42
good product
➡️ Reply
#Atlas Copco by steve on 2011-12-21 22:08
Please send asap, manual on GA7thkx
➡️ Reply
#Atlas Copco by Norm Hodder on 2011-12-25 11:07
We have this compressor on board our rig and we require a download schematic. Can you tell me how I can get thisNorm
➡️ Reply
#Atlas Copco by Nicson M. Sabiona on 2011-12-28 23:03
Sir, Good day, I\'m a Electronic technician, I want to ask regarding our compressor? if you start in automatic it\'s okay, but the problem it make load and unload but does not stop the motors for 20s. What is the cause of it?
➡️ Reply
#Atlas Copco by Glen on 2011-12-29 19:39
I have had the following error message appear on my Elektronikon 2 controler and was wondering if any one can explain it to me?Glenmessage 11200000B_Sw 010531_Thanks,Glen
➡️ Reply
#Atlas Copco by Matheus Rodegheri on 2012-01-03 13:24
Hello,We need the repair manual of this compressor to make the maintenance. Can you send to me?Regards
➡️ Reply
#Atlas Copco by alinavaz merchant on 2012-01-05 12:19
dear sir,my atlas copco scrow air comprassor display folt folt 200 so what can i do pleas give your manualthanksalinavaz merchant
➡️ Reply
#Atlas Copco by Gerry Loftus on 2012-01-05 19:11
Dear Sir/MadamWould you have a Parts Manual for an Atlas Copco XAS 175 Compressor road compressor & What price?Thank you,Gerry Loftus
➡️ Reply
#Atlas Copco by BIL07 on 2012-01-09 10:01
MESSAGE IS 100300000000 CAN HELP ME IN ES100 MK3
➡️ Reply
#Atlas Copco by mohamed on 2012-01-11 13:25
MOTIVAIR COMPRESSOR GA11 seriel no: A11 289084 87 86
➡️ Reply
#Atlas Copco by Jawahar on 2012-01-11 15:26
Hi Marko,I will send you the service manual. Send me your compressor details with your location details.ThanksJawahar
➡️ Reply
#Atlas Copco by Leonardo Ziegler on 2012-01-11 19:48
I need a manual for this Elektronikon with part number 1900 0700 05 . I hope there\'s someone can help my problem.
➡️ Reply
#Atlas Copco by paresh on 2012-01-12 03:38
i have atlas copco GA160 Werror code 110300000000what will we do for remove this error code
➡️ Reply
#Atlas Copco by dattatray on 2012-01-16 07:36
our old Elektronikon I is defective same we order and recived but setting parameter in the new are not the same as old one Pl. possible to send new instruction manual for same on above email address Tanks in advane
➡️ Reply
#Atlas Copco by RAMP PRAKASH RAI on 2012-01-16 12:07
It is a efficent stationary air compressor with good control, in my section it is installed at at FTA crane.Please send me the trouble shoot manual for Elektronic-I controller with fault diagnostic
➡️ Reply
#Atlas Copco by PAKACHENA MASENGWE on 2012-01-17 09:45
How are you, l kindly request for a maintenance manual for GA11FF compressor. We are having frequent vee belts breakages (at least one breakage per month) on compressors serial numbers CA1702888 and CA1702889 .PRODUCT NO. 8153001568. RegardsPakachena MasengweJunior Engineer Asset planning and utilis...
Show More
➡️ Reply
#Atlas Copco by pt. kereta api indonesia on 2012-01-18 10:39
kami sangat membutuhka wiring diagram sistim controll kompressor atlas copco type GA 708, kami mohon dapat di kirimka ke Email kami ini. Atas kesedian dan budi baiknya kami sampaikan terima kasih.
➡️ Reply
#Atlas Copco by chihaib on 2012-01-20 15:24
j\'ai un problème dans un compresseur atlas copco ga50 vsd indique un défaut 49
➡️ Reply
#Atlas Copco by Alfredo Paredes on 2012-01-20 17:37
I need the spares parts list for GA55 and GA55+FF atlas copco compresor.
➡️ Reply
#Atlas Copco by Ankur Patel on 2012-01-22 06:23
We having a 11nos. of ZHC-7000 compressors,we are planing to take all compressors reading in DCS for that we procure Combox-S but we can\'t having a modbus address for compressor parameters so kindly help for that. Please sent me modbus address on my mail
➡️ Reply
#Atlas Copco by ayman badawi on 2012-01-30 08:34
please help me, that we have two compressor type GA-110, when we but them in remote function , the motor of first compressor stopping and elektronikon display give indication ( starter feed back contact ), sorry what did it mean , and i want trouleshooting for elektronikon to know the function of so...
Show More
➡️ Reply
#Atlas Copco by Jomby on 2012-01-30 20:37
Hi Sir,I would like to know the cost to repair MLVA for MP 1600..I will appreciate your soonest reply.Thank You.Aime Jomby
➡️ Reply
#Atlas Copco by trushar on 2012-02-04 09:25
I need electronikon ll manual for changing parameters in atlas copco compressor model - GA30AWFF AT THE EARLIEST POSSIBLE MEANS AT THE PRESCRIBED EMAIL ADDRESS REGARDS,TRUSHAR THAKKAR
➡️ Reply
#Atlas Copco by KESAVAN on 2012-02-11 17:30
need this atlas copco compressor ga75 & ga90 (vfd) electrical drawing.
➡️ Reply
#Atlas Copco by manpreetroy on 2012-02-14 10:55
manual wiring
➡️ Reply
#Atlas Copco by m. imran on 2012-02-15 06:43
Dear SirWe have GA 50 Ndrive and we got problem in compressor which shows an EERROR 7301.Kindly give us detail of this error and how to solve this problem also kindly give us the trouble shooting manuals for feature gauidance .ThanksImran
➡️ Reply
#Atlas Copco by higinio carrillo on 2012-02-20 16:19
Atlas Copco : alarm 110300000000
➡️ Reply
#Atlas Copco by higinio carrillo on 2012-02-20 16:20
Atlas Copco : alarm 110300000000
➡️ Reply
#Atlas Copco by higinio carrillo camacho on 2012-02-20 16:31
alarm electronicon of alarm 110300000000 Atlas Copco GA 160FF
➡️ Reply
#Atlas Copco by R.SENTHILKUMAR on 2012-02-23 21:21
Requested sir/madam please send the GA 55& 75 ATLAS COPCO COMPRESSOR PREVENTIVE MAINTENANCE DETAILS THANKING YOU R.SENTHILKUMAR
➡️ Reply
#Atlas Copco by Jorge vargas on 2012-02-24 16:21
I needelecktronikon manual request Elektronokon II inquiri information elecktronikon manual Manual de uso del Display Elektronikon mod. GA55 Atlas Copco : reset alarma en displeyrequest manual Require working and diagram of GA55VSDFFconnection diagram atlascopco ATLAS COPCO ELEKTRONIKON CONTROLLER G...
Show More
➡️ Reply
#Atlas Copco by Lee Wei How (Wellson) on 2012-02-29 09:31
Atlas Copco is a very good machine. But somehow we need the electrical diagram for the compressor as our record as previously lost it accidentally. The machine we had is GA75 VSD with Serial number AII 496765. Please kindly send us the drawing as soon as possible.
➡️ Reply
#Atlas Copco by Bernard TEMBO on 2012-03-02 17:36
Bonjour, Je suis coordinateur et superviseur instrument travaillant à Kitina (Eni Congo ) et j\'ai un problème sur le compresseur Atlas Copco GA 132 + le module Electronikon venu avec le compresseur était hors service, j’ avais commande un autre avec le même part number, lors de la mise en service, ...
Show More
➡️ Reply
#Atlas Copco by krishan saini on 2012-03-06 11:16
Element out let temp. too high check thermostate
➡️ Reply
#Atlas Copco by Inderjit Singh Rana on 2012-03-06 13:20
Dear Sir/madamI have purchased used compressor for trader. I request to send complete manual for our reference.RegardsI S Rana
➡️ Reply
#Atlas Copco by Inderjit Singh Rana on 2012-03-06 13:22
Dear Sir/MadamI need if it\'s possible the manual of ELEKTRONIKON IIpersonal request for manual.RegardsI S Rana
➡️ Reply
#Atlas Copco by Miftah on 2012-03-07 10:41
We have using ZR 250 compressor since 5 year,and we need operating manual for our compressor, serial no 080239 year of manufacturer 2003Kind regardsMIftah
➡️ Reply
#Atlas Copco by ashraf on 2012-03-09 02:06
this is number one of air compressor in the worldplease i need manual of anew screen in atlas copco compressors
➡️ Reply
#Atlas Copco by Myint Thein Oo on 2012-03-12 04:01
good to use for various compress air needs
➡️ Reply
#Atlas Copco by Damar on 2012-03-13 03:53
I need a manual book/user manual of elektronikon II. I need to read the wiring diagram and set up the compressor.Thank you.
➡️ Reply
#Atlas Copco by ahmed gomaa on 2012-03-14 09:46
manual for Elektronikon controllerfor ga15ff
➡️ Reply
#Atlas Copco by ahmed gomaa on 2012-03-14 09:51
service manual of elektronikon 1900 0700 08
➡️ Reply
#Atlas Copco by ahmed gomaa on 2012-03-14 09:59
GA15FF compressor maintenance manual
➡️ Reply
#Atlas Copco by Abdussamad on 2012-03-15 19:22
hello, our atlas copco G15 installed in Tebisti oil field does not start, there was the temperature lamp on but I fixed this problem, I connected the temperature sensor a jumper but though it does not start, and there was the oil level lamp on too but it is gone now, this atlas copco driving me craz...
Show More
➡️ Reply
#Atlas Copco by RAKOTOZANANY on 2012-03-16 04:43
I need a manual for compressor GA7FF because our maintenance for 4000 hours is appear.Or we don\'t have any document for this.
➡️ Reply
#Atlas Copco by tamer on 2012-03-18 08:13
electrical connect of atlas copco elektronikon 1900 0701 04 ,ga50 vsd
➡️ Reply
#Atlas Copco by bishelnoor on 2012-03-20 07:48
very good comprossor and it very easy to serves and operate .little faulte and give enough pressure.
➡️ Reply
#Atlas Copco by Lenin Falconí on 2012-03-20 19:44
Dear Atlas CopcoI need a manual or instructions to set RS485 communications with Siemens Micromaster 440 VSD (variable speed drive). My costummer is replacing the MM440 VSD due to failure, but unfortunately He has lost the parameters of the drive in the process. The enterprise where I work is soluti...
Show More
➡️ Reply
#Atlas Copco by Septa on 2012-03-21 09:32
Error 7301 Elektronikon II can\'t communication with Masterdrive Simovert VC - GA 30 VSD
➡️ Reply
#Atlas Copco by Muhammad Ali on 2012-03-22 08:03
Atlas Copco is best compressor
➡️ Reply
#Atlas Copco by mohd on 2012-03-24 07:47
electric digram of compressor GA37
➡️ Reply
#Atlas Copco by Allan on 2012-03-29 13:34
GA 160
➡️ Reply
#Atlas Copco by V S yadav on 2012-03-31 13:14
Dear sirMy elektronikon\'s power of every 15 minut Please sugestV s yadav9351471656
➡️ Reply
#Atlas Copco by V S yadav on 2012-03-31 13:18
Dear sirMy elektronikon\'s power of every 15 minut Please sugestV s yadav9351471656
➡️ Reply
#Atlas Copco by Chris Karmilowicz on 2012-04-02 15:40
I would like to obtain the programming software for the Elektronikon Regulator, can you send me a link?
➡️ Reply
#Atlas Copco by Mauro leonardo Zarate on 2012-04-04 21:59
He tenido algunos detalles de mi compresor que resuelvo con su manual, estare muy agradecido si me hace el favor de proporcionarmelo.Saludos
➡️ Reply
#Atlas Copco by Eldric I. Santos on 2012-04-05 06:52
Very good air compressors
➡️ Reply
#Atlas Copco by BRUNO BOGETTI on 2012-04-05 16:15
Dear sirs. may you can help me whit a list of spare parts for a maintenance of 8000 hrs, for the compresor GA 55 FF, i would apreciate your comentsBest Regards
➡️ Reply
#Atlas Copco by JOSE DUENEZ on 2012-04-10 02:22
i need service for compressor and i need worck hours
➡️ Reply
#Atlas Copco by Mario Canaza on 2012-04-12 19:31
por favor requiero con urgencia los documentos referidos al compresor GA160-10AP-380V/50Hz, tengo problemas con la salida de aire que entrega humo.
➡️ Reply
#Atlas Copco by jairaj dayal on 2012-04-13 07:38
atlas copco electrical drawings no 9095 4049 00
➡️ Reply
#Atlas Copco by selmo on 2012-04-15 19:38
gostaria de receber por emaisl o manualde operacione e control de ga75 elcktronikonll
➡️ Reply
#Atlas Copco by Chiranjeevi Raju on 2012-04-16 11:55
Dear sir,please send the Spare parts manual for GA22 air compressor for ordering spare from the local dealer.Thanks and regards,Chiranjeevi RajuManager- Maintenance.
➡️ Reply
#Atlas Copco by MAZOUARI on 2012-04-19 13:03
Bonjour;merci bien de m\'envoyer la documentation technique relatif au régulteur Electronikon PN:1900070125
➡️ Reply
#Atlas Copco by João Fortio on 2012-04-20 08:49
We need manual user urgent, please
➡️ Reply
#Atlas Copco by Constantin Berbec on 2012-04-25 13:02
Dear Service Please to Help me , we have two Electronik II new , when I connect to GA 30 On the LCD Display shown :1220000011000000982039780931How can solve this problem?Thank you
➡️ Reply
#Atlas Copco by Jaisankar on 2012-04-25 18:00
Kindly arrange the sameRegardsK JaishankarMob9923262336
➡️ Reply
#Atlas Copco by Harendra sharma on 2012-05-02 06:25
Atlac copco is outstanding air compressor
➡️ Reply
#Atlas Copco by MOHAMED KABEWA on 2012-05-04 22:21
Please assist wiring diagram for above compressor,thanks
➡️ Reply
#Atlas Copco by Oscar Lopez on 2012-05-05 10:04
We currently have two of your compressors and we dont have manuals for servicing or for troubleshooting procedures. I will appreciate if you can make it available to me threw my email or let me know if i need to send my adress.
➡️ Reply
#Atlas Copco by Wawan Arif on 2012-05-07 04:14
help me please,I can not activate the remote start stop?
➡️ Reply
#Atlas Copco by Wawan Arif on 2012-05-07 04:16
help me please,I can not activate the remote start stop?i use elektronikon operation system 1900523027Board Modul 1900524001
➡️ Reply
#Atlas Copco by cheikh on 2012-05-07 10:50
Compresseur Atlas est trés utilisé au sénégal
➡️ Reply
#Atlas Copco by M. Imran Amin on 2012-05-19 08:33
Dear SIrWe have problem in Atlas Compressor GA50 VSD , THe copressor ELKTONE Shows an Error 7301 and 7401. Kindly help out us to solve this problem and what is the meaning of 7301 and 7401.ThanksImran
➡️ Reply
#Atlas Copco by Alex Pontes on 2012-05-21 18:58
We are interested in LeTourneau’s MCM. Due this, could you please check out if you have this part, under PN 4226370? Model L1850. thank you very much.
➡️ Reply
#Atlas Copco by florisvaldo on 2012-05-24 00:56
E uma grande empresa com seguimento no mercado na linha de secadores.
➡️ Reply
#Atlas Copco by harish nyati on 2012-05-24 02:56
Sir,We have procured one item from you and it,s name as per your sticker affix on item is \"spacer part no 1622340000\"Please let me know that Element oil_seperator part no 162234000 of ga55awp is same as given above spacer.
➡️ Reply
#Atlas Copco by NIKHIL DOSHI on 2012-05-26 05:25
Dear Sir,Pleased to request a manual for atlas copco GA-55 model,we are currently doing PM on our machine andwe need to identify the parts to purchase. And we need to knowhow to dismantle the element/air end step-by-step.THANKSNIKHIL DOSHIRAJURI STEEL PVT LTD JALNA
➡️ Reply
#Atlas Copco by saleh on 2012-05-28 12:06
we do have GX7 found oil in the air dryer
➡️ Reply
#Atlas Copco by rogerio on 2012-06-01 12:28
preciso do manul de alrmes do elektronicon do compressor GA-90 por favor se possivel for
➡️ Reply
#Atlas Copco by Balasea Adrian on 2012-06-05 08:37
Can you help?GA22-2001 message is system failure 104 what this mean? and how do we rectify the problem. At 1st error code 11 came up but now just the 104 message is shown.Can you help?Regards, Adrian.
➡️ Reply
#Atlas Copco by mylavank7 on 2012-06-05 15:17
please send for me electronikonmaster control module operating and trouble shoothing manual details
➡️ Reply
#Atlas Copco by nishant madhale on 2012-06-05 16:21
can u send me total trouble shutting manual for atlas copco ga 37
➡️ Reply
#Atlas Copco by Oktai Mamedov on 2012-06-06 11:01
I should like to purchase new electric-motor for GA37 (in 2006 purchased) to repair compressor. Due to our delivery address situated in Finland, I have to apply to the Europian services. No result yet.
➡️ Reply
#Atlas Copco by prabakar.s on 2012-06-08 06:49
high efficiency compresor
➡️ Reply
#Atlas Copco by SACHIN BARAVKAR on 2012-06-09 03:19
Atlas copco is master in manufacturing of compressors
➡️ Reply
#Atlas Copco by Kasiar Mohideen Abdul Kader on 2012-06-11 17:52
In our plant, we have 2 nos GA 22+ compressors installed & in service for about 4 years. We would like to have Part manual & service manual with exploded drawings for use & reference.
➡️ Reply
#Atlas Copco by Oscar Pineda on 2012-06-12 16:13
Hi I just inherited this compressor at our new facility. I have no idea how to make it run, thanks for any helpOsar PinedaLM Westheimer Collision
➡️ Reply
#Atlas Copco by anbu on 2012-06-14 07:00
Sir,Kindly give your quote for the GA75 plus [100hp] compressor screw unit bearing setV.Anbumani
➡️ Reply
#Atlas Copco by Gleem Arena on 2012-06-18 21:49
Productos excelentes.
➡️ Reply
#Atlas Copco by Darek on 2012-06-19 18:13
I need manual for GA15ff
➡️ Reply
#Atlas Copco by widodo on 2012-06-20 08:53
Dear sir, we had frequently error that elektronikon 2 can not reset,we had tried to clean the board, check overload.when we turn off and turn on again, still asking for resetting but resetting button not responsiveness
➡️ Reply
#Atlas Copco by babu on 2012-06-21 18:25
turbo compressor not start due to starter contractor open,
➡️ Reply
#Atlas Copco by abdulwaheedftc@live.com on 2012-06-22 17:53
plz give me reparng manual for Electronikon II controller GA 55+
➡️ Reply
#Atlas Copco by NYECK Robert on 2012-06-23 11:22
Bonjour ,Je souhaite avoir la documentation technique du Compresseur XAS 30le manuel d\'utilisation et de maintenanceCordialement Robert NYECK
➡️ Reply
#Atlas Copco by Remegio B. Dar on 2012-07-01 18:41
Dear Sir/Madam,I work in gulf glass manufacturing company,kuwait,we have 3 atlas copco compressor ZR-250,we are facing the control panel overheating and the controller electronikon be come damage,please give me an advice how to reduce the hot inside the panel and what equipment we need to fix in the...
Show More
➡️ Reply
#Atlas Copco by wissam on 2012-07-02 22:49
it is on of gretes companes and the best
➡️ Reply
#Atlas Copco by hclm2 on 2012-07-17 10:53
Thank you
➡️ Reply
#Atlas Copco by RAMMANOHAR YADAWA on 2012-07-21 08:39
PARTS LIST OF GA37 AND GA11 MODEL NO.
➡️ Reply
#Atlas Copco by eni on 2012-07-21 08:40
hello! I come near you seek help because we have an air compressor atlas copco who is in default, what is written on the screen \"system failure 104\" but we no longer have the manual, thank you votrebcomprehension and soon
➡️ Reply
#Atlas Copco by PEDRO PABLO BARRAZA on 2012-07-25 14:49
parts manuals air compresor model GA55 number serial API 601 201THANKS!!!
➡️ Reply
#Atlas Copco by sanja on 2012-07-26 10:27
I need some information on a GA7 FF compressor
➡️ Reply
#Atlas Copco by mngwenya on 2012-07-29 16:52
which port on the regulator is reserved for CAN connection to the COMBOX-P?
➡️ Reply
#Atlas Copco by Gennadiy Kornyukh on 2012-07-31 13:22
Dear Sirs,I need to replace Pressure Transmitter PT20 on our compressor,but I have not part number for order.Could You,plese send me spare parts list with parts number.Best regards Gennadiy
➡️ Reply
#Atlas Copco by chopade sopan sahadu on 2012-07-31 13:37
ga 160 capacity
➡️ Reply
#Atlas Copco by BOUSBA abdenacer on 2012-08-01 12:55
nous vous prions de bien vouloir nous envoyer une copie format PDF des documents accompagnant le compresseur GA 22 ( manuel d\'utilisation et d\'entretien du compresseur ainsi que celui du régulateur ELECTRONIKON.remerciements anticipés
➡️ Reply
#Atlas Copco by Ketan J Bhatt on 2012-08-06 13:04
Dear Sir,Pls send elect Drawing for above mention model.RegardsKetan Bhatt
➡️ Reply
#Atlas Copco by HARI VEEJAY on 2012-08-09 07:21
air compressor atlascapco GA 37+FF repairing & maintenance manual
➡️ Reply
#Atlas Copco by Jimmy Liem on 2012-08-12 06:21
Hi There,Could you please supply us with the Manuals as we requested.Kind Regards,
➡️ Reply
#Atlas Copco by ram on 2012-08-12 17:45
plz check alaram
➡️ Reply
#Atlas Copco by escelott presilda on 2012-08-19 11:07
Pls: sent me The Service interval of air ccmpresure GA75+ff
➡️ Reply
#Atlas Copco by moustafa on 2012-08-27 06:42
i need the drawing for trouble shoot
➡️ Reply
#Atlas Copco by Ruben Arboleda on 2012-08-27 14:52
Hola David, Has encontrado como solucionar este error, ya que tengo un compresor GA55 y muestra el mismo error. mi correo es arboledaruben@gmail.comSaludos!
➡️ Reply
#Atlas Copco by ch azhar on 2012-08-29 12:59
We have language problem in electronicon II model provided with compressor GA II FF.How we program the English Language.
➡️ Reply
#Atlas Copco by ainsley whyte on 2012-09-04 23:43
fault converter
➡️ Reply
#Atlas Copco by ainsley whyte on 2012-09-04 23:44
fault converter
➡️ Reply
#Atlas Copco by nasir on 2012-09-09 07:20
please help me on the mentioned subject.
➡️ Reply
#Atlas Copco by George Lupascu on 2012-09-12 11:30
Hi Sir,I would like to know if you repair MLVA head for Noritsu QSS 2901 I will appreciate your soonest reply.Thank You. All the best George
➡️ Reply
#Atlas Copco by nasiruddin on 2012-09-15 01:59
please, if any body have the pc softwaer for Elektronika II . v c
➡️ Reply
#Atlas Copco by amusa olatunde on 2012-09-19 17:15
Electrical drawing for ga75w compressor
➡️ Reply
#Atlas Copco by zeljko milanovic on 2012-09-22 12:32
Dears , we have Elektronikon IV for reparation 1900070123 and together have 1900070145 , need urgent replay
➡️ Reply
#Atlas Copco by PT. Elbana Industrial Supply on 2012-10-08 10:09
Dear Sir, Please advice the above price and delivery time for repaired 1 Unit Elektronikon MK 3 Atlas Copco Compressor P/N 1900 0700 08 ; S/N 02035000145.Your promp response is highly appresiation.B.RegardsKusmayadi
➡️ Reply
#Atlas Copco by nasir on 2012-10-10 13:00
Please help me, if any body have the software and provide me download link through my e-mail\"nasiruddin_1234@yahoo.com\".
➡️ Reply
#Atlas Copco by daniel davila on 2012-10-11 20:16
Ineed to know how keep the separator temp below 210ºF,I cleaned the combicooler, room\'s temp it\'s 80ºF,oil level it\'s OK, whatelse can I do?thank\'s in advance for your support.
➡️ Reply
#Atlas Copco by Klaus Niederstätter on 2012-10-12 07:15
We have one Atlas copco compressor model: GA75VSD The compressor contains a MM440 Siemens drive. (6SE6440-2UD38-8FA1)The drive has been damaged and we need the application Parameters for the drive.Best regardsKlaus
➡️ Reply
#Atlas Copco by FRANCIS KWEKU BONFUL on 2012-10-22 09:07
we operating oil free compressor ZR160 and the electronikon MK3 displays an error which reads as follows: internal failure 7001please send me trouble shooting and solution to this problem.thank you francis bonful
➡️ Reply
#Atlas Copco by Patrice LESPINE on 2012-10-22 09:32
Bonjour,Pourrai je avoir le schéma electrique des connecteurs de l\'elektronikon1pour un GA15 AII282414.Merci.Patrice LESPINE
➡️ Reply
#Atlas Copco by adilalmusawi on 2012-10-24 08:40
HiI need the wiring diagram (wiring Diagram) for Electronikon II G37 for Atlas Copco Machine (Compressor Machine). I have the wiring diagram (printed on papers) but it is so small that could not help me to rearrange the wiring for it.
➡️ Reply
#Atlas Copco by Aboua Guy serge on 2012-11-01 08:42
Juste savoir que signifie le code 110300000000 du GA90?
➡️ Reply
#Atlas Copco by Aboua Guy serge on 2012-11-01 08:44
Juste savoir que signifie le code 110300000000 du GA90?
➡️ Reply
#Atlas Copco by Claudemir Antonio Thomaz on 2012-11-05 22:21
gostaria de saber programar o painel Qc1002 não estou conseguindo o manual esta em ingles segui as instruções mas pede senha eu libero so uma das tres opções de ajustes tipo R1 R2 R3 libera so R2 como fazer para mudar para as outras duas opções ?
➡️ Reply
#Atlas Copco by Aniekan Peters on 2012-11-11 07:30
We\'d like some literature that details the plug-in pin numbers for this Elektronikon controller for our GA75 machine so we can troubleshoot/verify whether we have a problem with our comtroller, or whether another component on the machine is faulty.
➡️ Reply
#Atlas Copco by Elie Renno on 2012-11-19 10:12
Dears,I have a GA75 FF Manual and i am having some problems in starting it in Local mode & Remote mode.I appreciate recieving the operation manual for it,Thank you,Elie
➡️ Reply
#Atlas Copco by AYADI on 2012-11-24 09:58
hello;please I have compressor atlas copco ga 30ut I dont have electrical manuel and mecanical manuel and manuel user/repear please can you send me manuel .
➡️ Reply
#Atlas Copco by ENRIQUE HERNANDEZ HERNANDEZ on 2012-11-24 18:12
Hello.I need your help. so i need the MANUAL of compressor atlas copco ga-55 I have 3 compressors and i don\'t have the manuals please send me information about this.thanks..
➡️ Reply
#Atlas Copco by poovalingam kesavan on 2012-11-25 10:08
dear sir, i need GA90VSD ELECTRICAL AND VFD AND CONTROL WIRING DIAGRAM. CONTROL PANAL TYPE 1900255003,SERIAL NUMBER:201201259;SERVICE DIAGRAM NUMBER:9820314001CONTROL VOLTAGE 115/24VAC,SUPPLY VOLTAGE 380/460V,RATED CURRENT 225/171A,MAX MOTOR POWER 90KW.
➡️ Reply
#Atlas Copco by joe reese on 2012-11-26 12:18
Hi ,We have a atlas copco type GA7FF Product# 8153005742Ser#CAI 707465 the manual we currently have does not have correct display listed for troubleshooting. hope you can help Thanks Joe NCI Frederick MD
➡️ Reply
#Atlas Copco by Mesaros Sandor on 2012-11-26 22:49
HelloI need a technical support for Your controller: a wiring diagram for MKIVCan I have it, pleasebest regardsSandorElektroProfessional comp.
➡️ Reply
#Atlas Copco by Tracey Norouziani on 2012-12-03 05:48
Hi I was wondering if possible if you have the electrical diagram for the ga 45 atlas copco. I\'m getting a error saying \"run phase sequence\" Can you PLEASE HELP? if you have the diagram would you please send me a copy.Thank You Tracey
➡️ Reply
#Atlas Copco by baali on 2012-12-11 16:53
I\'m a planner ,we have ATLAS COPCO GA 55 in our campany ( Petroleum) and we need to palanifai plant of preventive maintenance , please send for us the manual preventive maitenance GA 55 thank you
➡️ Reply
#Atlas Copco by Haseeb on 2012-12-24 06:14
Dear SirI need Atlas Copco GA55 Plus electrical power and control manual pleas send meThanking YouHaseeb
➡️ Reply
#Atlas Copco by Marouani Nejib on 2012-12-24 08:04
i have atlas copco GA90 W N°série AIF075504error code 110300000000what will we do for remove this error code
➡️ Reply
#Atlas Copco by neili lotfi on 2012-12-24 08:24
what mean the \"110300000000\" alarm please.Faithfully
➡️ Reply
#Atlas Copco by Sandeep Kumar on 2013-01-14 13:31
We need repairing Noritsu 2901 MLVA Head, please provide cost
➡️ Reply
#Atlas Copco by Willie Downey on 2013-01-23 10:50
I have a Electrnikon controller that is showing a SYSTEM FAILURE 200 fault when i power it up. Do you know what this is?
➡️ Reply
#Atlas Copco by Abdallah on 2013-01-28 16:07
I have 2 compressor Ga75 and 1 Ga55VsdI have an alarm with Ga55Vsd manfacturing year 2007The alarm is : inverter faliauerI need the soluation The compressor make 35000hr
➡️ Reply
#Atlas Copco by kasiyanto on 2013-01-29 03:33
Dear sir,I am kasiyanto.Here one problem in electronikon-iii(ZT-22) panel can not see display.can or not i change dispaly with ather type(ZT-45)Please replay imformation for me about that in my emailThanksBest regardskasiyantocikampekindonesia
➡️ Reply
#Atlas Copco by Martín German on 2013-01-29 20:43
Hello,I need the manual of air compressor Atlas Copco brand model: GA55FFThank youMartín Germán
➡️ Reply
#Atlas Copco by joe garar on 2013-02-04 08:01
appear on the display of control panel 100300000000 for ga55
➡️ Reply
#Atlas Copco by joe garar on 2013-02-04 08:03
appear on the display of control panel 100300000000 for ga55
➡️ Reply
#Atlas Copco by MIR JAHANGIR on 2013-02-07 10:18
Dear Sir/Madam ;we have GA7 Compressors. We need this units\' documents as soon as possible. Please send me GA7 Compressors\' Operation and Maintenance Manuals & Spare Parts ListWaiting for your reply as soon as possible
➡️ Reply
#Atlas Copco by Mustafa Al-wakil on 2013-02-12 17:52
Kindly advise or recommend repair to be made on GA22 dead set control panel.
➡️ Reply
#Atlas Copco by emilio doinog on 2013-02-21 14:43
we have a system failures troubles in our compressor atlas copco ga 45, and i dont know how to solve this troubles, i try to change the new elecktronikon display but did not work , but i think the new display may be lack of program because no display appear, The troubles are ; SYSTEM FAILURES AND SE...
Show More
➡️ Reply
#Atlas Copco by jamal on 2013-02-24 07:59
plaese help me to fix this proplem
➡️ Reply
#Atlas Copco by lahcene meskine on 2013-02-28 12:50
Dear Sirs,I need technical manual(s) of Elektronikon P/N:1900070122 or 1900070125.Thanks for your attention
➡️ Reply
#Atlas Copco by meskine lahcene on 2013-03-01 09:39
HelloI need a technical support for Your controller: a wiring diagram for MKIVCan I have it, pleasebest regardsLahcene
➡️ Reply
#Atlas Copco by moutasem on 2013-03-02 10:47
I need atlas copco zt 37 Electrical wiring diagra and plc diagram
➡️ Reply
#Atlas Copco by shaz on 2013-03-06 17:00
ineed electric digram
➡️ Reply
#Atlas Copco by Ahmet Seyrek on 2013-03-13 21:12
Dear sir or Dear MadamAfter ten days from our 8000 hours maintenance, we have now a starter feedback contact fault in our GA 160FF Model Atloas Copco Compresor.What would you like to recommend for this problem as solution?Thanks....
➡️ Reply
#Atlas Copco by Ahmet Seyrek on 2013-03-13 21:14
Dear sir or Dear MadamAfter ten days from our 8000 hours maintenance, we have now a starter feedback contact fault in our GA 160FF Model Atloas Copco Compresor.What would you like to recommend for this problem as solution?Thanks....(Compressor model : GA 160FF)
➡️ Reply
#Atlas Copco by m whitaker on 2013-03-15 21:56
I could you please help i have just taken over a engineering workshop The compressor we have has got a electroniken graphic controller , need a operations manual for the controller . any info would be appreciated thanks .
➡️ Reply
#Atlas Copco by giang on 2013-04-01 01:57
drawing electical GA75+ and GA160
➡️ Reply
#Atlas Copco by hossein hosseinzade on 2013-04-01 11:26
Hello I have one compressor air Atlas Copco GA55 type 1900-0582-03 .This compressor has elektonikon display.Please send me manual of this.
➡️ Reply
#Atlas Copco by sabir on 2013-04-04 14:02
Dear sir our compressure did not start in the display there is no any alarm or warning engine is cranking but no start pls help as we have 6 air copressure in this type .i will wait for your ans. thanks for your coporation BR. mohammad sabir
➡️ Reply
#Atlas Copco by Jawahar K on 2013-04-24 05:34
Dear sir/madam, We are using Elektronikon Graphic controller mentioned. #1. Art nr: PBEO11, Partnr No: P1900520011 S.No: SRN0950A00361 CR244507 Boitier type 4 enclouser. #2. Art nr: PPBE0631 S.No: SRN0948A00021. We are taking LAN/Ethernet cable from #1 and connected with PC via internet Switch. Here...
Show More
➡️ Reply
#Atlas Copco by HAMAMI DJAMEL on 2013-04-28 12:18
MANUEL OF GA22FFand problem, Element output hot air
➡️ Reply
#Atlas Copco by Imran Ali Khan on 2013-05-04 21:41
plz if u have technical manual of this controller then plz send me \"my compressor is showing system failure 106
➡️ Reply
#Atlas Copco by J Mitchell on 2013-05-09 20:37
Originally had to send the simovert drive for repair due toit faulting on f11 and f26. The repair company told there had replaced 2 faulty items carried out a function test. all ok. They then returned the drive which I subsequently refitted and powered the compressor up and tried to start it only ge...
Show More
➡️ Reply
#Atlas Copco by duc duong on 2013-05-14 04:48
Display Elektronikon II mod. GA55: \" sensor error\" but I haven\'nt got electrical diagram of GA 55. Can you help me! or sent to electrical diagram of GA 55.Thanks
➡️ Reply
#Atlas Copco by michael on 2013-05-22 00:39
Please send me GA7 Installation Operation and Maintenance Manuals.
➡️ Reply
#Atlas Copco by Weldon Rop on 2013-05-30 16:02
Atlas Copco is Excellent in manufacture, sale and service of a wide range of compressors
➡️ Reply
#Atlas Copco by Anirudh Parida on 2013-06-01 05:26
Dear Sir,We are facing problem in Klektronikon II Regulator as follows :Warning Massage : System Failure 104.In the manual Code 104 is not mentioned. Pl. confirm us the possibility area of problem.Note : This is used for Atlas Cope Air Compressore.Regards,Anirudh Parida, Sr. Manager Elect.For PSL Lt...
Show More
➡️ Reply
#Atlas Copco by Victor on 2013-06-03 10:27
Hi, try to find and fix the parameters for communications on converter, it must be set the same baudrate as Elektronicon (19600).
➡️ Reply
#Atlas Copco by DEBASIS SASMAL on 2013-06-05 06:17
We are using two GA 55+ compressor.But i want to know working principle of thermostat of this compressor
➡️ Reply
#Atlas Copco by chakramanikyam on 2013-06-07 11:40
Dear Sir,we have the atlas capco compressors in our plant in that on of the compressor is tripped and in display is showing some codes, but we unable to decode the code due to the lack of instruction manual. So that kindly request you to please send the operation and instruction manual to us for fau...
Show More
➡️ Reply
#Atlas Copco by George Bose on 2013-06-12 20:59
I am fist time using this compressor. I need to get your help to repair it. And kindly let me know how to charge the refrigerant 134a and what is the purpose for refrigerant charging. Please mention the refrigerant charging procedur.Thanks and regards,George Bose
➡️ Reply
#Atlas Copco by Tommy Dillon on 2013-06-13 12:37
I have a system failure 200 will not reset. Tried a manual start of machine now i have a system failure 14, will not reset. Can you help?
➡️ Reply
#Atlas Copco by Ali rahimpour on 2013-06-23 10:17
dear sirplease send spare parts list.Regards
➡️ Reply
#Atlas Copco by aamir on 2013-07-05 15:09
we are using GA75 Atlas Copco the ELEKTRONIKON MODULE showing fault \'system failure\' so please give us some solution to rectify above problem thanks and regards
➡️ Reply
#Atlas Copco by ahmad on 2013-07-09 04:32
hi deari need user manual and software for program vsd siemens 6se7031-5ef20-0bb0 simovertvc thanks for send emailthanks
➡️ Reply
#Atlas Copco by Oscar Mendoza García on 2013-08-15 00:01
cost for repair the controller 1900 0701 04 Atlas copcoCould you please send me Price for repair ?Best regards.Oscar Mendoza G:
➡️ Reply
#Atlas Copco by ukundwanimana fabien on 2013-10-16 14:13
we have the compressor ZT90 and we woul want to have those manual they can help us
➡️ Reply
#Atlas Copco by Russell Smith on 2013-10-27 22:34
I am needing all electrical schematic control diagrams
➡️ Reply
#Atlas Copco by Kishan Patel on 2013-11-11 09:36
Dear Sir,i have electronikon regulator. i want to repair this displayPart no : 1900070124 / 1900070145Display Error : 11020000000Awaiting for your replyFor, Kishan Patel 09925382518Unique Compressor Technology
➡️ Reply
#Atlas Copco by daniel davila on 2013-12-04 15:48
I NEED THIS LITERATURE TO REPAIR THIS COMPRESSOR, THANK\'S IN ADVANCE FOR YOUR HELP!
➡️ Reply
#Atlas Copco by Eta Leonard on 2013-12-10 12:55
GA 37 part list manual is of importance to enable my company get genuine parts
➡️ Reply
#Atlas Copco by Alexandr on 2013-12-17 12:17
Good afternoon. Need electrical schematic diagram of the compressor ZT160FF. Thanks in advance.
➡️ Reply
#Atlas Copco by Alexandr on 2013-12-17 12:18
Good afternoon. Need electrical schematic diagram of the compressor ZT160FF. Thanks in advance.
➡️ Reply
#Atlas Copco by SON NGUYEN on 2013-12-18 06:00
I can\'t start my GA75. When i power up, the Elektronikon II, show: time out What is this?What should I do?Please send to me: Manual Elektronikon II.too ,Thank you!!!
➡️ Reply
#Atlas Copco by SON NGUYEN on 2013-12-18 06:08
We are in need of ATLAS COPCO\'s ELEKTRONIKON MODEL GA75 connection wiring diagram. If you have it, kindly send TO ME
➡️ Reply
#Atlas Copco by Claude Neron on 2013-12-18 12:59
We are trying to find the electronical connection for a Electronikon on a GA55 not the electronikon ii but the first one that has being sold
➡️ Reply
#Atlas Copco by samir shah on 2013-12-24 04:54
WE NEED TO REPAIR THE DRIVE OF ATLAS COPCO MAKE SAM-DA-400-50N-P4N-E
➡️ Reply
#Atlas Copco by v.saravanan on 2013-12-24 09:23
sir, we want the electrical drawing for GA37KW VFD COMPRESSOR , so u pls send the drawing is earliear,
➡️ Reply
#Atlas Copco by v.saravanan on 2013-12-24 09:30
sir, we are using the GA37 KW VFD system , so at mean time alaram falut is convert time out, so what is the problem, so u can suggest the remedies is earliear,thanking you,v.saravanan+919940850119
➡️ Reply
#Atlas Copco by nassim zouaoui on 2013-12-30 14:27
operating manual thank youragrds
➡️ Reply
#Atlas Copco by Koim Pun on 2014-02-11 23:58
Good compressors to work with.
➡️ Reply
#Atlas Copco by Reinier Swanepoel on 2014-02-20 02:00
Changed out display panel about 6mnth ago, display stops working again. Tested the supply and found 24v going in but display is not working . Could it be a coincident or maybe a bad display panel.Advice
➡️ Reply
#Atlas Copco by zahid iqbal on 2014-03-03 06:49
dear sir ihave ga 55 kw air comprosser want ELECTRICAL DIAGRAM part no 1900.0590.73 and searil no 93023934 supply voltage24volts ac pls u give me electrical diagram thanks sir
➡️ Reply
#Atlas Copco by fani ard on 2014-03-11 08:43
HiI needAtlas Copco GA 18 elektronikon I,datasheet, repair and service manualthanks
➡️ Reply
#Atlas Copco by BREHIMA GUINDO on 2014-03-30 08:16
Hi all,The control panel of compressor atlas copco ga200 is blocked. No entry in the menu is possible. The message showing is \"shutdown max 16 bar\".help needed.thank you.
➡️ Reply
#Atlas Copco by Rakesh kumar on 2014-04-01 23:07
not able to reset Alarm 110300000000 for GA200 controller
➡️ Reply
#Atlas Copco by EZALDEIN on 2014-07-16 20:00
INEED ELECTRICAL DRAWING OF GA55+ with elektroikon 11
➡️ Reply
#Atlas Copco by ADAN GUTIERREZ BUSTAMANTE on 2014-08-15 00:09
appear on the display of control panel 100300000000 for ga55ff, please you help for the alarm. i wait for your the opiniots
➡️ Reply
#Atlas Copco by PANKAJ on 2014-08-20 12:22
Dear , sir I have used ZR-250 comp. in moserbaer india limited. So alarm comes on -110300000000 . so please clear this alarm . what is alarm reason . urentlyReg.Pankaj
➡️ Reply
#Atlas Copco by Nasser on 2014-09-06 14:20
please i need information Electronic Repair.because that engine dasnet warking.please help me, thanks for all.
➡️ Reply
#Atlas Copco by kousar pasha on 2014-09-27 17:45
Atlsas copco compressor is a number 1 compressor maintanence proper give more life
➡️ Reply
#Atlas Copco by Zamir on 2014-10-10 05:43
Hi,I am Maintenance engineer I need the detail of \" System Failure 10\" of Atlas Copco 75KW compressor. Can you help me in this matter? Also if you have its troubleshooting manual then please send it me on above email id. ThanksRegards,ZamirMechatronics & Control Engineer
➡️ Reply
#Atlas Copco by joseph ugwuneke on 2014-10-15 17:46
please I want the complete electrical schematic drawing for your compressor XAS 185 JD, as I have a group of these compressors and now having problem with one, it shuts down after five munities of starting it up. please be of help to me, I am still recommending atlas copco as a very good product, Pl...
Show More
➡️ Reply
#Atlas Copco by alan goodwin on 2014-10-24 14:13
I have a Elektronikon control unit part no 1900 0700 05 can you give me cost of repair and replacement.
➡️ Reply
#Atlas Copco by JOHNNY MARTINEZ on 2014-11-21 05:12
Hello I\'m johnny from mexico, I have a little problem whit a machine atlas copco GA75 FF , In the display of Elektronikon , appear a error , the number is 100300000000 . thhank so much for you help beste regards
➡️ Reply
#Atlas Copco by kevin schofield on 2014-12-10 21:24
Please send the operation manual for the ElektroniconII on our 2006 compressor. type GA11VSDNr AP1160620I am in need of the manual for the Elektronikon II only.Thank you,kevi schofield
➡️ Reply
#Atlas Copco by jami on 2014-12-14 08:04
Dear sir sir\'si have a compresor module ga11c at this time on display show system failure 106 and do not workplease help me to fix this problema.jami
➡️ Reply
#Atlas Copco by moradi on 2014-12-29 07:52
hi dear we need to terminal detail for elektronikon ll for use the drive for our compressor
➡️ Reply
#Atlas Copco by labinot on 2014-12-29 11:11
Mr did you find any solution for yours problem beacues i have the same problem and i don\'t know what to do. thanky very much for any respons
➡️ Reply
#Atlas Copco by labinot on 2014-12-29 11:54
Hello MR. I have the same problem, do you find the solution?
➡️ Reply
#Atlas Copco by sajo paul on 2015-01-26 09:21
Please tell what the alarm message for 110200000000.
➡️ Reply
#Atlas Copco by Rovy on 2015-01-26 12:45
We request for operation manual for Atlas Copco GA75FF Elektronikon display panel.
➡️ Reply
#Atlas Copco by mohammad dadkhah on 2015-02-02 10:39
helloi want the electrical wiring of ga75 i dont know the wiring between the sockets 2x1 ,2x2,...2x9 of elektronikon control board.
➡️ Reply
#Atlas Copco by aziz on 2015-03-26 09:20
dear sir, please send me the inverter parameters. best regards
➡️ Reply
#Atlas Copco by yarob on 2015-03-28 12:59
how reset alarm 110300000000
➡️ Reply
#Atlas Copco by aslam hassan vk on 2015-04-13 06:58
good performance
➡️ Reply
#Atlas Copco by aslam hassan vk on 2015-04-13 07:01
good performance
➡️ Reply
#Atlas Copco by Charliecob on 2015-04-27 15:58
Hello. And Bye.
➡️ Reply
#Atlas Copco by N.L.C.A.Gunasekara on 2015-05-05 03:47
When power on after 4 days shut down period there is a alarm on the display100300000000
➡️ Reply
#Atlas Copco by Harold F. Spivey on 2015-05-14 19:52
We have two Atlas Copco GA75 units in operation. We need a manual for a Elecktronikon P1950520011, Could you please assist us in receiving a manual.Thanks Harold Spivey
➡️ Reply
#Atlas Copco by samir patel on 2015-05-20 15:40
when start pb pressed power off alarm coming and software restarting soplease send user manual
➡️ Reply
#Atlas Copco by Faizal on 2015-05-26 04:53
Hello we operating oil free compressor ZT110 and the electronikon displays an error which reads as follows: system failure 7001please send me trouble shooting and solution to this problem.thank you
➡️ Reply
#Atlas Copco by Faizal on 2015-05-26 04:53
Hello we operating oil free compressor ZT110 and the electronikon displays an error which reads as follows: system failure 7001please send me trouble shooting and solution to this problem.thank you
➡️ Reply
#Atlas Copco by Pankaj kumar gochhayat on 2015-06-09 05:54
Dear sir,Kindly provide us mentioned guide and parts manuals for maintenance the 3 nos of new compressor
➡️ Reply
#Atlas Copco by Daniel tro on 2015-07-27 09:44
Juste savoir que signifie le code 110300000000 du GA90?
➡️ Reply
#Atlas Copco by M.kamran on 2015-09-08 07:37
dear siratlas copco ga 90 vsd give me information electrical manual thanksM.kamran
➡️ Reply
#Atlas Copco by magor sow on 2015-09-15 18:59
HelloI have a ga compressor 75 of the 1990 serial number; ARP89293 1I wanted the code to enter the menu to change the pressure of 7.5 to 10 barsthank you
➡️ Reply
#Atlas Copco by SHAJAN PANIKAR on 2015-09-17 08:25
MACHINE AND WORKING IS VERY GOOD
➡️ Reply
#Atlas Copco by mohammed gomaa on 2015-09-17 21:31
it is good commpressor
➡️ Reply
#Atlas Copco by mohammed gomaa on 2015-09-17 21:31
it is good commpressor
➡️ Reply
#Atlas Copco by Onder Demirel on 2015-10-02 08:51
Hello Dear Sir / Madam;I have an atlas copco compressor and I dont have manuel so that I want to send ýt to me. Its label information is like bottom;Serial 32693-91Year 1991type 12029393026002
➡️ Reply
#Atlas Copco by Anil Kumar on 2015-10-28 10:28
please help me, controller shows fault 110300000000. I need your help to rectify the faultregarding Anil
➡️ Reply
#Atlas Copco by NAGENDAR BAHADUR SINGH on 2015-11-04 05:53
Dear Sir,Pleased to request a manual for atlas copco GA-55 model,we are currently doing PM on our machine andwe need to identify the parts to purchase. And we need to knowhow to dismantle the element/air end step-by-step. THANKS, NAGENDRA BAHADUR SINGH SR. ENG.K.M.SUGAR MILLS LTDS MOTINAGAR FAIZABAD...
Show More
➡️ Reply
#Atlas Copco by Ludwig Valderrama on 2015-11-17 19:49
Controller display 110200000000 messageNeed manual & programming procedure about Elektronikon controllerPart # 100070124
➡️ Reply
#Atlas Copco by Mohamad Nasir Khan on 2015-11-25 11:15
I want to order motor inboard & outboard bearing Temp. sensors ordering detail or part number is required. Motor Product code: 3GBC282230-BXGAC411
➡️ Reply
#Atlas Copco by Omid on 2015-12-06 11:03
Dear Sir,can you please provide me the manual of electronikon.RegardsOmid
➡️ Reply
#Atlas Copco by Omid on 2015-12-06 11:12
schematic diagram of ga50vsdthanksomid
➡️ Reply
#Atlas Copco by Omid on 2015-12-06 11:15
Dear sir.i really need user manual for electronikon,bcoz i have an air compressor GA 50VSD and unfortunately compressor electrnicon has fault, also i have consulted to concern person in pakistan but he didn\'t help me and i m in deep trouble right now.I hope u will help me out. thanksomid
➡️ Reply
#Atlas Copco by eng ahmed alshahat on 2016-01-15 08:14
part no:1900059811 ed:03sn:003700001
➡️ Reply
#Atlas Copco by Abdulla Aldulayme on 2016-02-29 11:47
Dear Sir or Madam,Would you please send me the maintenance manual for GA7 air compressor which I need it for the maintenance of our air compressors and to specify the required spare parts and order them from Atlas Copco Iraq.your fast response is a highly appreciated.Best regards,Abdulla Aldulayme
➡️ Reply
#Atlas Copco by ma on 2016-03-25 10:15
electrical drawing for GA 90 VS D
➡️ Reply
#Atlas Copco by chris on 2016-04-15 13:29
Hiwould it be possible if i could recieve wiring diagram for plc thanks.modell no. GA22PART no. 1900071103serial no. 01110502342
➡️ Reply
#Atlas Copco by Bernal Mederos on 2016-06-17 17:28
We need the elecrtric diagram for a zt 90vsd ff
➡️ Reply
#Atlas Copco by Nathan Yehirai on 2016-06-24 21:11
Hello,We are having issues with a GA30+ compressor. The controller is not accessible. It has a fault code that is locking out the controller and causing the not to start . The display on the controller is indicating B -SW 0106. Please can you assist by sending me a Troubleshooting/Service Manual and...
Show More
➡️ Reply
#Atlas Copco by divya darshini on 2016-07-20 11:04
atlas copco ga55c manual required
➡️ Reply
#Atlas Copco by Jason on 2016-07-28 08:51
I have same problem with GA90VSD.So please tell me how about for repair.Thank you so much!
➡️ Reply
#Atlas Copco by yasser on 2016-08-21 13:20
prat mr: 1900070123serial nr: 06972600304thankful
➡️ Reply
#Atlas Copco by Mehdi on 2016-08-29 17:01
Dear recipientKindly we have a error on diplay 110200000000can you help us for this issue?Thanks a lot
➡️ Reply
#Atlas Copco by sunil yadav on 2016-08-29 17:12
Electrical diagram
➡️ Reply
#Atlas Copco by sunil yadav on 2016-08-29 17:13
Electrical diagram
➡️ Reply
#Atlas Copco by mourad on 2016-09-13 09:40
J\'ai deux compresseur atlas copco GA 75 FF + ET j\'ai besoin du schéma electrique pour COMPRESSEUR GA 75 FF+
➡️ Reply
#Atlas Copco by mourad on 2016-09-13 09:41
J\'ai deux compresseur atlas copco GA 75 FF + ET j\'ai besoin du schéma electrique pour COMPRESSEUR GA 75 FF+
➡️ Reply
#Atlas Copco by Sangay Lungten on 2016-09-16 07:02
Sir,We bought the Electronikon II from your dealer at Kolkota. But after fiitting it to the machine still no disply. Please help us what may be the problems.
➡️ Reply
#Atlas Copco by IVES CHRISTIAN TRAORE on 2016-09-26 18:32
my compressor ATLAS COPCO (CAT C18) is shut off ant not start : CAM AIRXPERSS COMMUNICATION FAILURE.
➡️ Reply
#Atlas Copco by ahmed mergheny on 2016-09-28 16:15
i have comoerssor atlas copoc GA55 and have meassage on screen 100300000000
➡️ Reply
#Atlas Copco by AMJAD ALI on 2016-10-22 08:55
DEAR SIR this alarm trubbleshouting and actino THANK FULL
➡️ Reply
#Atlas Copco by Paulo Oliveira on 2016-10-24 10:36
GA-37
➡️ Reply
#Atlas Copco by Paulo Oliveira on 2016-10-24 10:37
GA-37
➡️ Reply
#Atlas Copco by Paulo Oliveira on 2016-10-24 10:39
GA-37
➡️ Reply
#Atlas Copco by Piyush rajgor on 2016-11-04 06:01
Sir pls inform me what is the mean of this alarm (100300000000) and how to remove thisThanking you
➡️ Reply
#Atlas Copco by GENENE ALEMU on 2016-11-07 08:35
Atlas copco product is /are a world wide known product. currently we need electrical diagram of this machine.
➡️ Reply
#Atlas Copco by salim on 2016-11-08 16:35
when i installed new controller we received on screen 110300000000please help me, controller shows fault 110300000000. I need your help to rectify the fault .
➡️ Reply
#Atlas Copco by casmel on 2016-11-12 08:10
they are good compressors
➡️ Reply
#Atlas Copco by Ntsako Mabunda on 2016-11-16 10:24
Hi,I need a detailed wiring diagram for part nr. : 1900 0710 32. It is a control card / display unit for my Atlas Copco compressor.
➡️ Reply
#Atlas Copco by miguel on 2016-11-16 14:26
please service manual pn:190007125
➡️ Reply
#Atlas Copco by taabache noureddine on 2016-11-17 22:56
all informationc about model ga 90 FF thank;s
➡️ Reply
#Atlas Copco by vikas borana on 2016-11-21 08:30
GA 30 COMPRESSURE ELECTRICA DIAGRAM
➡️ Reply
#Atlas Copco by Emmanuel Mumba on 2016-11-29 20:02
Dear SirKindly give us a quote for ATLAS COPCO CONTROL PANEL FOR GA55 COMPRESSORSerial # 05000200194Part # 1900 0701 05Supply 24VacAIR COMPRESSORProduct type: GA55Serial # AII 468648
➡️ Reply
#Atlas Copco by Adison on 2016-12-02 08:00
I have an error that said to me "compressor element 116 grad celsius".I should to know what is this?
➡️ Reply
#Atlas Copco by emran on 2016-12-05 11:03
error list of ga315 atlas copco
➡️ Reply
#Atlas Copco by omar on 2016-12-08 18:36
at work some of our electrical tech put 110v for input 24v that cause problem where compressor controLler is off i found SMD input Resistance is damage i change smd where controller is work without data what i do, also i need wiring digram for compressor where compressor data is:ATLAS COPCOpart no: ...
Show More
➡️ Reply
#Atlas Copco by Bala on 2016-12-24 16:31
Hi,How to reset Elektronikon password to enable "modify parameters" load and unload setting.
➡️ Reply
#Atlas Copco by Emmanuel Mumba on 2017-01-05 08:08
HiI want a manuel for GA55 PC Control part # 1900 0701 05
➡️ Reply
#Atlas Copco by Diego on 2017-01-19 02:38
Necesito manual en español compresor Atlas Copco Ga 55
➡️ Reply
#Atlas Copco by Salaheldin elserwy on 2017-01-21 10:46
We need mechanical maintenance catalog for atlas copco compressor model Ga75+Ga 710 pack
➡️ Reply
#Atlas Copco by Yalember Setotaw on 2017-01-24 07:07
Best Brand i ever see
➡️ Reply
#Atlas Copco by afiq on 2017-02-01 11:39
J'aurais besoin de la documentation du superviseur ELECTRONIKON2
➡️ Reply
#Atlas Copco by Mahmoud Hassan Farid Hawash on 2017-03-15 17:44
I NEED OPERATION & MAINTENANCE MANUAL OF Atlas Copco GA7 FF, ALSO I NEED TO KNOW HOW MANY OPERATING HOURS I NEED TO CHANGE Oil filter & oil separator, I HAVE NOT ANY MANUAL FOR AIR COMPRESSOR, thank you so much
➡️ Reply
#Atlas Copco by rajesh on 2017-04-12 06:55
good morning,i have a problem in electronikon iv controller , shut down reset is not done. message is Starter contact feed back is closed. but feed back is healthy. and LOCAL Control B is showing instead of LOcal Control A. I Need trouble shooting service manual
➡️ Reply
#Atlas Copco by hamel on 2017-04-29 16:38
our company sonatrach ;we are facing a system failure 106 in our atlas copco zt 18 please give me a help to resolve this problem
➡️ Reply
#Atlas Copco by Pourya on 2017-05-11 19:34
hi i have problem in ZR200 compressor . this alarm comes and compressor shtting down : 110200000000what is the meaning this alarm please send me alarm code thank you
➡️ Reply
#Atlas Copco by Jeiner Jhampier Riofrio Zapata on 2017-05-15 22:10
Buenas tardes,un gusto saludarles desde Perú.El motivo de este mensaje es para solicitar su ayuda con un problema de compresor atlas copco modelo GA22P, controlador modelo MKIII 1900070007Resulta que no arranca el motor de compresor. No muestra ninguna alarma, la temperatura es 24°C.La presión es 0 ...
Show More
➡️ Reply
#Atlas Copco by Muhammad Shafiq on 2017-05-23 16:11
Hi we are looking for Elektronikon 1900 0700 07 electrical connection diagram
➡️ Reply
#Atlas Copco by aziz ahamed on 2017-07-13 10:25
i need g11 catelogue
➡️ Reply
#Atlas Copco by cicero campos on 2017-07-14 14:04
I have a controller 1900 0701 24, it is with an alarm 110200000000, I would like to know the following from alarm.thanks in advance.
➡️ Reply
#Atlas Copco by ahmad on 2017-07-21 00:49
when i turn on the atlas copcp elektronikon i read system failur 100 and atlas copcp elektronikon do not work.
➡️ Reply
#Atlas Copco by samiullah on 2017-07-22 07:08
Dear Sir, i need wiring diagram of GA 18
➡️ Reply
#Atlas Copco by Mohamed Alskee on 2017-07-23 11:54
Hello we operating oil free compressor 40D24 and the electronikon displays an error which reads as follows: system failure 7001
➡️ Reply
#Atlas Copco by José Moreno on 2017-07-24 20:37
I need to reset conditions
➡️ Reply
#Atlas Copco by AHMED on 2017-07-26 17:29
a message in display; 11100000B-SW 010431-
➡️ Reply
#Atlas Copco by MARK SCHIMPLER on 2017-07-28 20:27
CAN YOU PROVIDE AN ELECTRICAL DRAWING FOR THE CONTROLLER ON A GA90 AIR COOLED COMPRESSOR.CONTROLLER SN: 06033600018PART #: 1900 0701 25SUPPLY VOLTAGE: 24VACRELAY OUTPUTS: 250VAC
➡️ Reply
#Atlas Copco by brent dunbrack on 2017-08-14 23:05
I need to know how to determine the firmware version of the ES-100 elektronicon p/n 1900 0701 06
➡️ Reply
#Atlas Copco by marlon mejala on 2017-08-22 10:27
need to troubleshoot overload error of compressor
➡️ Reply
#Atlas Copco by Armando Verástegui Torres on 2017-09-06 12:53
I have an Atlas Copco dryer FD410 in which I have problems with high pressure alarm in the refrigerant line and even I just presented a "dewpoint" alarm. You can, I suppose, support sending the manual with the faultsFirst of all, Thanks.
➡️ Reply
#Atlas Copco by mike ellis on 2017-09-21 17:11
Hi,We have a Jubilee Electronics Autofold machine that stopped measuring distance properly. We have narrowed down the issue to the controls but the Mfg. says they no longer support our board and only give the option of completely replacing the computer station which is a metal stand with an keyboard...
Show More
➡️ Reply
#Atlas Copco by N'dary Madiéye on 2017-09-23 10:39
Cherchons schéma pour intervenir sur notre compresseurs atlas copco G7 A11SHEMA ELECTRIQUE ELEKTRONIKON GA7 FFNous avons besoin de ce schéma pour dépanner notre compresseur voulez vous nous l'envoyer le schéma de électric de tout le système
➡️ Reply
#Atlas Copco by Tim on 2017-10-31 07:02
My atlas GA7 compressor was out of order I need service manual to troubleshooing.
➡️ Reply
#Atlas Copco by Sasa Dincic on 2017-11-04 08:16
I need a service manual..I buy GA50VSDff and i have a problem with compressor..
➡️ Reply
#Atlas Copco by abdesslam kebir on 2017-11-08 06:17
we have a problem with elektronikon II . it does not show anything so we need the wiring diagram to locate the default
➡️ Reply
#Atlas Copco by phillip on 2017-12-07 09:56
how to i clear ERROR 1002000000
➡️ Reply
#Atlas Copco by mamadou samba on 2018-01-22 12:58
hiim an costumer who need some parameter
➡️ Reply
#Atlas Copco by Haralabos Melenos on 2018-03-18 00:37
Controller shows faul 110300000000Thanks
➡️ Reply
#Atlas Copco by Jan Sjösten on 2018-03-29 06:38
Dear Sir, I am from VN, I have one machine Ga18 ( year 1998)now, controller alarm: system failure 11 & 104. machine can not run.I turn off the power and turn on but machine can not run!Pls, tell me, what must I do?Thanks & best regards,
➡️ Reply
#Atlas Copco by Muhammad Irfan on 2018-06-14 05:09
Dears please your assistI got alarm 100300000000 appeared in the screenthanks much.
➡️ Reply
#Atlas Copco by Helioui riadh on 2018-07-09 14:08
My atlas copco GA110 afficha afficha 110200000000
➡️ Reply
#Atlas Copco by Denis Long on 2018-07-19 20:47
I am looking for a J643 V1 I4 board. Do you have this part?
➡️ Reply
#Atlas Copco by ronald brownell on 2018-08-02 00:00
Just received an alert about an Atlas Copco 8433-4850-33 DC CONTROLLER failure. Need to troubleshoot ASAP to identify the faulty drive or board. Heading over now to investigate.
➡️ Reply
#Atlas Copco by SALMAN on 2018-11-23 05:40
GA 37 part list manual is of importance to enable my company get genuine parts
➡️ Reply
#Atlas Copco by amin on 2018-12-05 07:58
1900 0701 05 display error 1003000000001900 0701 03 display error 100200000000plaese help me
➡️ Reply
#Atlas Copco by Fida Hussain on 2019-01-03 10:23
part no. 1900070125 alarm code:110300000000
➡️ Reply
#Atlas Copco by Faizal Khan on 2019-04-13 03:24
I have Atlas Copco GAe30 P A 8.5,WUX251745,4.5,30,8.3 KW,year 2011-04.bought from Gamma Gas,China.Due to power shut the compressor can not restart,looks like password erased,we tried every way to restart,while selecting icons password shows blank.On screen number shows 00 bar despite going on 8.5 ba...
Show More
➡️ Reply
#Atlas Copco by hazim on 2019-05-01 18:58
fault code 31 no retain
➡️ Reply
#Atlas Copco by Jose Leonardo Xlhate on 2019-06-14 07:06
Dear Sir/Madam,I am looking for sensors for the motor with details above. Please provide a quotation for the winding & Bearing temperature sensors for this motor.S/N: 0638-010560773Product Code: 3GBC282230-BXGAC11 Please provide ordering codes and part number if you are not able to supply th...
Show More
➡️ Reply
#Atlas Copco by andrew matewu on 2019-06-19 10:11
Hello,I have a Atlas Copco ga55 compressor, the display show 100400000000when power up and nothing else is funtion. what wrong with the controller or machine? Thanks,
➡️ Reply
#Atlas Copco by Gilbert R Dela Cruz on 2019-06-26 05:40
Good day,We took over a ship from other company 3 years ago and we found out that the Atlas Copco Elektronikon 2 have password on it. how can we know its password or can it be reset. please we really need assistance. Thanks and Best Regards
➡️ Reply
#Atlas Copco by Petre Pistol on 2019-08-13 05:50
I have a Atlas Copco air compressor controller serial number 1900 0701 23.On display is a alarm code 11 02 00 00 00 00.How can it be repaired?Thank you!
➡️ Reply
#Atlas Copco by Vladimir Petrovic on 2019-09-02 07:52
I need manual for G-11 air compressor and electronic control panel
➡️ Reply
#Atlas Copco by reza on 2019-10-07 07:57
i have zr425 compressor that error 110200000000 appear in display,i think time keeper chip destroyed and need reprogramming .can some one help me fix it(i need data files for this compressor for DFM4WIN software)
➡️ Reply
#Atlas Copco by HAMIDOU on 2019-10-08 08:41
dear sir:i need electric schematic for atlascopco ga 22 astra comperessor.thanks.
➡️ Reply
#Atlas Copco by majid bagheri on 2019-11-07 09:49
Hii have a ELEKTRONIKON COMPRESSOR CONTROLLER P/N: 1900 0701 05 made by ATLAS COPCO. on the lcd Disply only show 100300000A 0 and no action.please guide me what is problem?best regardsmajid
➡️ Reply
#Atlas Copco by BALDO MEDINA on 2020-01-03 16:29
I receive a error code 110300000000 on my atlas compressor GA180VSD
➡️ Reply
#Atlas Copco by ali on 2020-01-09 13:18
schema elektronikon II pdf
➡️ Reply
#Atlas Copco by bunyamin diricanli on 2020-03-23 09:11
Hello Dear Sir / Madam;we have an atlas copco compressor Model : GA 55 (50 hz european year :1990 ) and I dont have manuel would you send us user manualCompressor label information is like bottom;Serial ARP 889924Year 1990type GA 55Best regardsBunyamin Diricanli
➡️ Reply
#Atlas Copco by Martin Hernandez on 2020-08-12 19:46
I need your help.I need to clear this alarm in my air compressor , but I have not the manual or to know what kind of error is?Could you helpme about it please?Error Display 110200000000 .Regards.
➡️ Reply
#Atlas Copco by Engr. Muzaffar on 2020-09-26 07:52
Error code 7301 System failure GA90VSD with 7301 defaultPlease suggest solution of this error as soon as possible.Thank you.
➡️ Reply
#Atlas Copco by alaa on 2020-11-02 06:34
Could you supply a user manual for the elektronikon controle part nr : 1900 0701 05
➡️ Reply
#Atlas Copco by qasim on 2021-01-19 15:23
please tell me what can I do about alarm 110200000000 in display on air compressor atlas-Copco, GA 90 thank you very much serial number 0006004900031part number 900070124
➡️ Reply
#Atlas Copco by moaaz ahmed on 2021-02-09 12:01
Screen Control PN1900070106QTY:1
➡️ Reply
#Atlas Copco by LAASRI MED on 2021-04-06 20:21
i need the electrical diagram of electonikon N° part 1900 0710 32 thanks
➡️ Reply
#Atlas Copco by Mohsin ali on 2021-04-22 09:57
Atas copco elecktronikon display fault 100300000000
➡️ Reply
#Atlas Copco by Reza. Shadfar on 2021-05-21 08:11
I need manual control panel elektronikon 1900 0701 23. If you have, send to me please.thank you.
➡️ Reply
#Atlas Copco by mohamed ait lahssaine on 2021-06-28 11:00
i have a problem with compressor i need the drowing to solve this problemthanks
➡️ Reply
#Atlas Copco by Hope Uwaya on 2021-07-23 08:39
Kindly help with schematic of module ELEKTRONIKON for SF11 Atlas Copco Compressor.
➡️ Reply
#Atlas Copco by Dhan Chavez` on 2021-07-30 02:43
sensor error appeared on screen..what to do?
➡️ Reply
#Atlas Copco by mohamad on 2021-09-26 08:12
HelloI need To Manual Of Elektronikon Controller By Part Number 1900 0701 04For Wiring and Remote ControlCan You Help Me?
➡️ Reply
#Atlas Copco by anwar on 2021-10-16 10:39
i have compressor controller ELEKTRONIKON 1900 SERIES ITS display showing code only 110300000000please let me know what is this and please send how to solve problemthanks
➡️ Reply
#Atlas Copco by Elvis rojas on 2021-12-13 01:01
Buenas noches,muy buenos equipos, requiero manual de programación , no permite aran que manual, solicito clave para su arranqué automático
➡️ Reply
#Atlas Copco by Elvis rojas on 2021-12-13 03:21
Buenas noches,muy buenos equipos, requiero manual de programación , no permite aran que manual, solicito clave para su arranqué automático
➡️ Reply
#Atlas Copco by Mina on 2021-12-20 15:22
Dear Sir/MadamI have Atlas Copco GA55 compressor. Now Elektronikon Master Control doesn't display anything except 100400000000. The compressor cannot be started for operational.PN : 1900070106 What's wrong with the Control? Please Give me information. Thank You
➡️ Reply
#Atlas Copco by Le anh phi on 2022-01-14 09:37
Fault: starter feedback contact , shutdow
➡️ Reply
#Atlas Copco by loveawake.ru on 2022-01-24 15:56
Welcome to the world of adult Dating loveawake.ru
➡️ Reply
#Atlas Copco by JamesMub on 2022-02-01 08:04
{{Funny animals video 2022}|
➡️ Reply
#Atlas Copco by sidy sarr on 2022-02-21 15:25
Bonjour mon compresseur atlas copco ne demarre pas quand je le met sous tension il affice une defaut 110300000000. veuillez m'informer de la signification de cette alarme (110300000000) et comment supprimer
➡️ Reply
#Atlas Copco by NAOUFAL LAHBALAT on 2022-03-13 13:37
manuel atlas copco GA55+ elektronikon II
➡️ Reply
#Atlas Copco by Nasir Shamdar on 2022-03-29 09:22
I need some information regarding atlas copco dryer unit
➡️ Reply
#Atlas Copco by Davidescag on 2022-06-10 11:05
Justin Trudeau took a look at the clock on the wire box once more. It was nearly three in the early morning. He certainly assumed Sophie would certainly be home hrs ago. He twisted around on the couch once again attempting to make himself comfy. One of those old traditional late-night films brighten...
Show More
➡️ Reply
#Atlas Copco by Gargano on 2022-07-13 07:31
WE have two of the Atlas-Copco GA132 compressors onboard for our bulk handling system.One of them has an error code on the Elektronikon control panel, reading: -110200000000 - can you advise what this means or represents?Thank you,Alan Bowie.
➡️ Reply

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.