Troubleshooting K.E.W: Common problems and repair info

K.E.W for Service call 1-336-969-0110 at Industrial Electronics Repair

K.E.W Service & Repair Forum

Looking for parts manual of help with parts for Unit Model #3803V-103 1985/40No.# 2104067 240v/1/30 ampAny help would be greatly appreciated.

— Posted by Kevin Gonneau on 2007-05-07

Reply🗨️Ask a New Question Below❓

Recent 95 Comments

#K.E.W by MARK on 2010-01-02 19:00

My kew steam cleaner does not have water pressure. It exits the gun but only trickles out. Can you help? Many thanksMark

➡️ Reply

#K.E.W by lyndon hammill on 2006-11-06 19:24

All the lights on the temp gauge lit means that the fuel tankis empty. If there is fuel in the tank, there may not be enoughto activate the tank sensor. put more fuel in.If the tank is full,the tank sender is faulty. It will need replacing.In the meentime you can bypass the tank sender by shorting o…...
Show More

➡️ Reply

#K.E.W by William Knee on 2009-03-21 12:25

HI I check all and no start and I am a Electrician

➡️ Reply

#K.E.W by Gerald Mansfield on 2007-10-01 00:46

I purchased a K.E.W. 1500 unit on a sale and would like to get an owners manual/service manual for it. It\'s an electric unit. Thank you, Gerry Mansfield

➡️ Reply

#K.E.W by Josh Campbell on 2005-10-26 14:14

I am trying to refurbish a kew 1502v-66 power washer. I cannot get the oil fired burner to kick on. The control panel has a digital temp gauge and it shows the temperature of the water at its maximum value when the water is cold. I am in question if this is the problem with the burner not firing. I …...
Show More

➡️ Reply

#K.E.W by thijs thissen on 2009-07-13 08:11

We have recently purchased an second hand KEW high pressure cleaner but it does not get the full cleaning pressure. Can I recieve an owners manual by email to see what parts may be broekn in order to fix the machine?Thank you in advance.best regards,Thijs.

➡️ Reply

#K.E.W by Garry S James on 2009-04-09 10:26

I have a KEW 1502V – Hot & Cold Pressure Washer. I will be running this of a Generator at the same time as a water pump which has a rating of 700w.1. Can you what is the start up current of the Pressure Washer.2. What size Generator should I be looking for to run the Pressure Water and the Water Pum…...
Show More

➡️ Reply

#K.E.W by Joe Duran on 2008-06-13 23:41

Can I find a manual ?I was given one of these to me by a customer. I think I need a special water hose??

➡️ Reply

#K.E.W by john farkas on 2011-10-26 18:47

For any KEW products call Chris Gerber in S.C. (877)322-2586. Very knowledgable and helpfull. He is the US service rep.

➡️ Reply

#K.E.W by frank welch on 2010-12-02 13:46

just want to know how old this machine is and if it can still be repaired,i have no knowledge of what year it was made and know of no place to get it repaired

➡️ Reply

#K.E.W by Raymond Cooper on 2007-12-19 04:18

I need a service manual for a KEW 4503KB with exploded views, parts lists with prices... thank you for your time and help with this problem..Raymond Cooper951-926-5394

➡️ Reply

#K.E.W by ryan on 2011-04-02 17:51

I have a 1979 kew power washer and am looking for some pump parts or info on where to get parts it is mostly all in good shape put the pump needs work any info would be greatly apresated thanks ryan

➡️ Reply

#K.E.W by Gary on 2009-06-07 19:47

The burner won\'t turn off can anyone help

➡️ Reply

#K.E.W by Tim on 2009-09-28 17:42

I am looking for a seal kit for the pump on this unit if you can get one please email me back.

➡️ Reply

#K.E.W by Richard Beck on 2009-05-25 21:04

Have a Kew 3803V pressure washer, need to know where I can get itrepaired nearby.thank you

➡️ Reply

#K.E.W by leo on 2012-10-14 09:11

DO YOU HAVE A SOLUTION FOR THE OIL VALVE FROM THE BURNERIT WILL NOT GO ON BY WORKING WITH THE MACHINEPRESSION KONTAKTS ARE OKE

➡️ Reply

#K.E.W by dan johnson on 2007-05-28 23:54

I am trying to find out any info on this Kew (0802v-56)steam washer. If someone has a manual available, that would be great.

➡️ Reply

#K.E.W by cindy janeski on 2009-05-28 18:35

I am looking for a shop that carries replacement parts for a KEW pressure washer, the hose has sprung a leak and need to replace it the spray nozzle is also attached to the hose as a all in one unit

➡️ Reply

#K.E.W by Antonio Gonzalez on 2012-06-19 13:41

need the service manual of KEW 01K pressure washer

➡️ Reply

#K.E.W by gary appleton on 2008-06-10 15:53

i need new hose

➡️ Reply

#K.E.W by David Kerr on 2009-06-12 19:28

Hi, Help please, i\'m in need of a new lance for my older Kew Hobby 2600, would you have this item in stock ?

➡️ Reply

#K.E.W by Hassan. Mortazavi on 2010-10-10 01:05

How do i test the electrod or egniter to see its good?Thanks

➡️ Reply

#K.E.W by Len on 2009-10-23 14:28

I have a copy of the users instruction book for this machine if you are still in need.

➡️ Reply

#K.E.W by thomas thorn on 2009-05-03 09:24

The temprature regulator on the top of the washer is broken off next to the gauge i need a new part

➡️ Reply

#K.E.W by KEIRON on 2008-04-03 18:18

my steam cleaner is flashing F1 light, does anyone know what this fault is and does anyone have a manuel for this model?many thanks

➡️ Reply

#K.E.W by ken williams on 2011-11-08 03:02

Hi would you have a service manual for this cleaner??

➡️ Reply

#K.E.W by Amin on 2011-12-28 06:46

I have Kew 1640h i need operating manual,

➡️ Reply

#K.E.W by Bob Schultz III on 2011-08-17 15:47

I need a service manual with part numbers and specifacation please.

➡️ Reply

#K.E.W by Ola Wikstrand on 2009-11-01 17:38

HelloI have just purchased a KEW 38A2VA power washer with a faulty heater. Is it possible to get a manual and an exploded view drawing over this machine?Thanks! Ola

➡️ Reply

#K.E.W by Blair on 2007-08-15 01:10

call windy city equipment located in Elgin, Illinois

➡️ Reply

#K.E.W by hans on 2009-05-13 16:54

i can\'t get pressure on my kew 1640H. But i have seen that there are watercristals in the pressuremeter. Does someone know what the problem is?Thanks

➡️ Reply

#K.E.W by Ulf Dahl on 2015-03-24 13:14

HelloI have just purchased a KEW 38A2VA power washer with a faulty heater. Is it possible to get a manual and an exploded view drawing over this machine?Thanks!Uffe

➡️ Reply

#K.E.W by brian breslin on 2009-10-14 19:43

where might I download a user manual for parts and maintenance of my 1640h Thanks Brian

➡️ Reply

#K.E.W by Stuart on 2008-08-09 08:20

I need a service manual for a KEW 1502-66 with exploded views, parts lists with prices... thank you for your time and help with this problem..

➡️ Reply

#K.E.W by Grant Neeley on 2012-01-24 13:44

I have a KEW 23A2V pressure washer that the boiler Coil is completely shot now. I have welded some hole back together, but now it is beyond repair. Does anyone know where I can get a replacement coil?

➡️ Reply

#K.E.W by Odyssey Winery on 2010-08-23 21:14

I have a KEW pressure washer, model 0840HA. I am receiving intermittant F2 error codes and C4 error codes. I have taken it into my dealer for \"repair\" however the problem continues. Any ideas?

➡️ Reply

#K.E.W by PAUL GALLAGHER on 2008-11-17 21:50

HI,I HAVE JUST PURCHASED A KEW 38A2VA POWER WASHER. IS IT POSSIBLE TO GET A MANUAL FOR THIS MACHINE? ALSO WHAT GOES IN THE TANK MARKED WITH A SNOWFLAKE?THANKS PAUL.

➡️ Reply

#K.E.W by mario yasin on 2012-12-04 21:44

i need to fix my pei kew 4503kb pumbe kit and throtecan you fix itthank you

➡️ Reply

#K.E.W by Tom Hamilton on 2009-12-16 22:16

I may have the same pressure washer you have. My pressure gauge shows two circular pressure scales. The outer scale is from 0 to 150 with a heavy mark at the 50 digit and 100 digit. At the bottom it says \"BAR\". If your information plate says 62 BAR as mine does then acceptable pressure is between …...
Show More

➡️ Reply

#K.E.W by CESAR ALCAZAR on 2011-04-18 14:09

Hi I have a Heated Pressure Washer, and Im lookin for a specific part can you tell me if ispossible to found it. Lelow information of the machineMAKER: KEWMODELL: 3803V-103SER:2103205ASSET:43-1-5

➡️ Reply

#K.E.W by Murray Smith on 2010-10-09 06:33

I need a instruction manual for a KEW 1502-66 thank you

➡️ Reply

#K.E.W by ken Tucker on 2008-05-01 16:53

My KEW 1502v-66 is smoking badly and does not get hot. I think the diesel is not burning right. There is a blue flame between the contacts.

➡️ Reply

#K.E.W by john farkas on 2011-10-26 18:38

I am looking a the circuit board for my 0840HA hot water pressure washer. Mine burned out, the rest of the machine is nearly new. It would be a shame to trash it. KEW no longer makes this board.

➡️ Reply

#K.E.W by ali on 2009-05-31 05:45

I\'m looking for the maintenance manual for this machine

➡️ Reply

#K.E.W by Owen Torgerson on 2012-03-22 19:12

Great machine, had since new, recently experiencing difficulties acquiring heat.Lots of kerosene, lots of pressure on cold, new fuel spray nozzle...Help

➡️ Reply

#K.E.W by Martin Ferguson on 2009-07-10 14:10

No comments

➡️ Reply

#K.E.W by JAMES FARMER on 2016-05-02 19:22

the fuel will not pump, I don`t have the voltage coming out of the oil area of the board to open the solenoid on the fuel pump. I need a schematic to trace the problem, is there one available ?

➡️ Reply

#K.E.W by Hassan Mortazavi on 2010-10-08 16:23

i just got a used ke w scorpian steam cleaner and everything works exept it does not ignite or no spark to get flame.any idea.thankshassan

➡️ Reply

#K.E.W by angelineadlecraft@gmail.com on 2019-05-02 14:02

Good dayI am trying to find a manual to assist me with the heating system of a K.E.W. 38A2VA.Many thanks

➡️ Reply

#K.E.W by marcondes on 2010-03-17 22:11

my machine stop work hot water and pressure no good work

➡️ Reply