Anilam Service & Repair Forum
we got a new cnc lathe in our shope with an anilam crusader II control but if we try to jog the axis in manual mode you get an error code 18 we know what the book says about it but we do not know what to do to fix it any help would be greatly appreciatedThanks,David
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "Anilam"
- Anilam → Anilam MINI WIZARD A163-20000 ↗
- Anilam → 1100 Software ↗
- Anilam → Anilam WIZARD 350 A1920001 ↗
- Anilam → Anilam error code 18 ↗
- Anilam → Anilam Crusader II Model # A225-102113 ↗
- Anilam → Anilam WIZARD 111 A1480111 ↗
- Anilam → Anilam Cursador II ↗
- Anilam → Anilam : +X OR -X LIMIT ANILAM. ↗
- Anilam → ANILAM CRUSADER-2 ↗
- Anilam → cmos memory ↗
- Anilam → ANILAM CRUSADER-2 WIRING DIAGRAM ↗
- Anilam → Anilam crusader 2 l ↗
- Anilam → touch pad membrane for Anilam Crusader M ↗
- Anilam → Anilam Anilam Crusader II wiring Diagram ↗
- Anilam → Anilam 1100 control ↗
- Anilam → Anilam Crusader II 3Axis Z axis problems ↗
- Anilam → i have also problem +x or -x limit ↗
- Anilam → anilam error code 18 ↗
- Anilam → Anilam anilam crusader m ↗
If you need your Anilam unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 397 Comments
Anilam Wizzard A1662000000 unit is down mid-shift. Requires attention before using during the day.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizard 350 A1910001 not displaying any data or readings on the screen.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam Miniwizard A163-2000 Display Unit be repaired or replaced? Trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
i need the Anilam Anilam Crusader II wiring Diagramabdoaakl-cairo - egypt-abdoaakl1@yahoo.comthanks for you.
—> Purchase or Repair:
—> Purchase or Repair:
One of the drives or boards on the Anilam A1920001 controller just failed, need immediate attention! Heading to the next machine.
—> Purchase or Repair:
—> Purchase or Repair:
When I booted machine COMS battery state lowStandard COMS setupAdvance COMS setupauto configuration with BIOS defaultsauto configuration with power on defaultschange passwordauto detect hard diskauto detect hard disk utilitywrite to COMS and exitdonot write to COMS and exitI dont know where batterie…Purchase or Repair: 
...
Show More
Show More
The ANILAM 3000 TOUCH A7334029 control unit in the warehouse is exhibiting unusual behavior.
—> Purchase or Repair:
—> Purchase or Repair:
My ANILAM WIZARD 450 A245300 encoder unit is malfunctioning, and I need it repaired as soon as possible to avoid any production delays. Seeking assistance from a qualified technician who can quickly diagnose and fix the issue.
—> Purchase or Repair:
—> Purchase or Repair:
The ANILAM WIZARD 450 A245300 unit is not functioning properly. Description ENCODER.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 350 Plus A1920001 Digital Display Module is displaying erratic behavior, showing unusual outputs, and not functioning as expected.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 111 unit A1480111 is not functioning as usual. The display readings are flickering and jumping around erratically. The buttons do not seem to respond consistently, making it difficult to input commands.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam A1920001 controller is displaying unusual behavior in the warehouse. It is not functioning as it normally does. Please investigate the issue
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam WIZARD 211 A221300 Digital Readout Module is malfunctioning, causing delays and affecting the production line. Please urgently address this issue to minimize downtime and keep operations running smoothly.
—> Purchase or Repair:
—> Purchase or Repair:
Can you please confirm if the Anilam Wizard 350 Plus A1920002 control unit is still supported or if there are replacement parts available? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
We experienced unexpected downtime due to a malfunction with the Anilam WIZARD 211 A221300 Digital Readout Module. It occurred during today's shift. Can you provide guidance on how to address this issue before the next shift begins?
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizard 350 Plus A1920001 is displaying error code E301. Equipment is not responding to commands and appears to be frozen. Please advise on next steps for troubleshooting and repair.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please provide information on whether the Anilam Wizard 150 70000291 is still supported or if parts are available for this unit? Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Electronics Corp. Wizard 350+ A1920001 Display Unit is exhibiting unusual behavior in the warehouse. It is not functioning as it normally does, displaying erratic or abnormal behavior. Further troubleshooting or inspection is recommended to determine the issue.
—> Purchase or Repair:
—> Purchase or Repair:
The ANILAM 3000 TOUCH A7334029 controller unit is not working, please check it.
—> Purchase or Repair:
—> Purchase or Repair:
Russell,I may know where theres a used control \"head\" with a functional touch pad membrane. I sold one to a friend several years ago and I believe he never used it. Email me at drembedded_AT_yahoo_DOT_com with your contact info.Cheers,Michael
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizzard A1662000000 unit is not functioning. The maintenance team needs assistance with it.
—> Purchase or Repair:
—> Purchase or Repair:
My Anilam Miniwizard A163-2000 display unit is still not working. I need assistance with this matter. Please respond
—> Purchase or Repair:
—> Purchase or Repair:
There seems to be an issue with the Anilam A1920001 unit. Maintenance team needs your assistance to troubleshoot it.
—> Purchase or Repair:
—> Purchase or Repair:
My client needs assistance with an ANILAM 3000 TOUCH A7334029 controller. Could you please provide information on troubleshooting and repair options? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The XY Axis Controller (Anilam mini wizard A163-20000) just failed on one of the machines. Need to get this fixed ASAP for smooth operation.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Electronics Corp. Wizaed 350+ A1920001 display unit is not working.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam A1920001 unit is still down. I need a response this time. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, we are in need of repair information for an Anilam Electronics Corp. Wizaed 350+ A1920001 Display Unit. Something stopped working and we need assistance. Can you please provide us with the necessary repair details? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam A1920001 controller is displaying error code E102. Equipment has halted production. Please advise on next steps for diagnosis and repair.
—> Purchase or Repair:
—> Purchase or Repair:
I have an Anilam 1100 control that wont keep the cmos settings. The control starts to boot up but then tells me to push F2 to enter setup. I enter setup then save the changes but when I reboot the control does the same thing. What can be done to fix my problem?
—> Purchase or Repair:
—> Purchase or Repair:
We have a bridgeport with the 1100 anilam control on it. About a year ago the feed on the x @ y stopped working. Not able to engage the servos. We had a repairman come in who told us that the board that controls the servos is out. Have been waiting for him to have this repaired but has not found any…Purchase or Repair: 
...
Show More
Show More
The Anilam Wizard 211 A221200 DRO module is displaying error code E1, preventing proper functionality.
—> Purchase or Repair:
—> Purchase or Repair:
Our Anilam Wizard A166-2000000 unit is still down. Please ensure someone gets back to us
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am interested in purchasing an ANILAM WIZARD 450 A245300 encoder. Could you please provide me with information regarding pricing and availability? I am looking to source this unit quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, we have an Anilam Wizard 211 A221200 Display/Control Module that has stopped working. We are in need of a replacement part or repair service. Could you please provide me with repair information? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hey there! We have an ANILAM 3000 TOUCH A7334029 with an issue. Could you provide repair info for this ANILAM Controller as soon as possible? Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 350 Plus A1920002 is not functioning properly. Maintenance team needs assistance.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am following up on my previous message regarding the Anilam Patriot A1480001 Digital Readout. The unit is still down and I need assistance. Please ensure someone gets back to me
—> Purchase or Repair:
—> Purchase or Repair:
I need immediate assistance with my Anilam WIZARD 211 A221300 Digital Readout Module. The unit is still down and requires attention. Please respond as soon as possible.
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: