NSK Service & Repair Forum

plz email the detail Manual and Software for NSK Servo ESA B045Af3-21 . with Regard Navjot Singh

—> Purchase or Repair: Ticket Image

— Posted by Navjot Singh on 2007-09-24

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "NSK"

If you need your NSK unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 96 Comments

#NSK by Chansac on 2014-02-13 07:58
NSK ESA 4-34018-700 is showing error code E403 and not responding. Need urgent assistance to troubleshoot and restore operation.

—> Purchase or Repair:
#NSK by Amal Raj on 2009-04-27 16:31
Dear sirPlz send pdf ofesa-b045af3-21RegardsS.Amal Raj

—> Purchase or Repair:
#NSK by Mark Proctor on 2007-04-03 10:08
NSK ES3040K23-03 Servo DriveHi, We have an NSK ES3040K23-03 servo drive that requires repair.Do you have a fixed price repair on this unit?Please advise as soon as possible.ThanksMark Proctor

—> Purchase or Repair:
#NSK by Andy on 2012-11-29 23:44
We are working on our study thesis and our problem is we can\'t get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. There\'s no C2 warning on the Display. Any ideas what could be the problem of the drive and how we could possible sol…Purchase or Repair: Ticket Image...
Show More
#NSK by Chitfreerve on 2014-10-31 22:57
The NSK ESA 4-65006-700 drive unit experienced a malfunction earlier today, causing downtime from 130 PM to 300 PM. We need to address this issue

—> Purchase or Repair:
#NSK by Moises Tovar on 2009-06-03 21:56
I need a Nsk driverEE0608A05-24.2 or substituteThank you

—> Purchase or Repair:
#NSK by SABINUS on 2025-05-23 13:43
Hello, do you have an NSK ESA-B014CFD-21 driver available for sale or repair? Need it urgently for production. Thank you.

—> Purchase or Repair:
#NSK by mansuk hong on 2008-04-09 05:20
I\'d like to get a manual for nsk that is ESB014CFI-01A.I\'VE GOT A PROBLEM THAT IS E0-A ON THE DISPLAY I\'M NOT SURE WHAT DOES IT MEAN?COULD YOU TELL ME ABOUT THAT PROBLEM.

—> Purchase or Repair:
#NSK by Todd Havinga on 2008-02-21 21:30
Is there a reason why we have to constantly recalibrate the Home position on these drives, We are usins the ESA-Y3040T25-21

—> Purchase or Repair:
#NSK by Francesco Baldassa on 2010-09-17 09:10
Hello ,we need repair some parts NSK servodrive have you an office or desk manager in italy ?best regards Mr Francesco Baldassa

—> Purchase or Repair:
#NSK by Maher Amara on 2011-11-16 11:48
If it\'s possible to repqir the SERVO DRIVE NSK type EMOAOBK13-05SPR-T4/Z-NS

—> Purchase or Repair:
#NSK by elyamini on 2014-12-22 20:44
Hello, I am interested in purchasing the NSK ESA 4-65006-700 Drive unit. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#NSK by Volker Schmidt on 2009-01-07 10:26
We hava some drivers with the PN ESA-BO14CFD-21 or ESA-BO14CF3-11I can communicate over hyper terminal but not all command work, TS, TC, IO0/RB but some commands do not work like TT, MN.Do you have any idear?Thanks for help Volker

—> Purchase or Repair:
#NSK by Virgil on 2014-12-28 10:06
NSK ESA 4-65006-700 drive just failed, need urgent attention. Moving to next machine now to continue rounds.

—> Purchase or Repair:
#NSK by Thoma on 2014-02-17 07:58
Hello, I'm interested in the NSK ESA 4-65006-700 drive. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you!

—> Purchase or Repair:
#NSK by Andy on 2007-10-08 13:13
I from Russia.We do not have service NSK.I have read through the message I wish to ask. Service a manual is necessary to me.At me has deteriorated ESK-Y4080FT1-20 the driver.The ballast resistor 200 Ohms and the field transistor 2SK2662 burns down.I want the scheme or consultation.—> …Purchase or Repair: Ticket Image...
Show More
#NSK by Elkowich on 2014-02-13 04:58
The NSK ESA 4-65006-700 Drive unit is currently not functioning. Please investigate and provide a status update. Thank you.

—> Purchase or Repair:
#NSK by Chester Yong on 2010-08-12 09:15
dear sir,I would to check that do you able to repair this NSK driver model: ESA 23?

—> Purchase or Repair:
#NSK by Tom on 2007-03-03 02:20
Can you repair a ESLZ10CF1-01 drive and what is the turn around time? We have been sending these to another repair facility but we get about 20% of them back saying unable to repair. Can you help us ?ThanksTom

—> Purchase or Repair:
#NSK by Cacho on 2014-09-07 17:20
Hello, we are in urgent need of repair info for our NSK ESA 4-65006-700 Drive. Can you please provide guidance on how we can proceed with fixing this issue? Thank you.

—> Purchase or Repair:
#NSK by Mcguinness on 2014-12-23 15:06
Please provide me with detailed information about the NSK ESA 4-34018-700 Drive. We are looking into the possibility of finding replacement parts or repair options for this unit. Could you please confirm if it is still supported or if any parts are available for it? Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#NSK by Hans van der Hoorn on 2025-06-01 18:27
The NSK EM1010A15-05 drive unit is not working. Please check and repair.

—> Purchase or Repair:
#NSK by KUMARADEVAN SANTANADEWAN on 2009-06-08 10:55
I have one unit of NSK motor controller model NSK AMD EXC3 for repair.I would like to have advice, the frequent faulty of this module during production. Most of the fauly is burn IC of M1050 at Y and X- axis motor. Pls advice!

—> Purchase or Repair:
#NSK by Kevin Lim on 2011-05-24 01:23
My Scanray X-ray systems having the problem to activite X-ray operation, every time I\'m switched on the X-ray operation and it turn down immediately, and the control panel can not adjust the Ma setting. it is always fixed at 2Ma.

—> Purchase or Repair:
#NSK by Marcell on 2014-07-29 21:24
The NSK ESA 4-65006-700 drive seems to be experiencing some issues, as something has stopped working. I apologize for not being able to provide a more detailed description, but we'll do our best to get it sorted out for you. Thank you for your understanding.

—> Purchase or Repair:
#NSK by HEDI on 2011-11-09 08:40
Hello,We need a servo drive NSK Ref: EM040BK13-05/NSK Machine NETSTAL injection (injection of CD-R), No. :04-2323-65.Thank you for sending me your best price offer

—> Purchase or Repair:
#NSK by Schwaertzel on 2014-04-14 20:32
NSK ESA 4-65006-700 drive is malfunctioning, halting the production line. Urgent repair service needed to fix the issue immediately.

—> Purchase or Repair:
#NSK by suresh on 2009-02-16 17:39
we bought RF TX and RX encoder decoder kits from nsk electronics.but when we use our modules there is no output.if we come to u whether u test it

—> Purchase or Repair:
#NSK by Jim Bianchi on 2014-12-29 13:54
I am following up on the previous message regarding the NSK ESA 4-65006-700 Drive unit. The unit is still down. Please ensure someone gets back to me

—> Purchase or Repair:
#NSK by Eric Enloe on 2014-02-14 11:58
Hello, I'm reaching out on behalf of a client who needs assistance with an NSK ESA 4-65006-700 drive. Can you please provide information on repair services available for this part? Thank you.

—> Purchase or Repair:
#NSK by BesterPreisvergleich on 2011-12-04 10:31
Hallo, ich habe eine tolle Seite entdeckt,bei der man einfach den billigsten Preis für allerlei Dinge suchen kann. Hier ist der link Bester Preisvergleich Ach ja, ausserdem findet man dort jede Menge Gutscheine, was natürlich toll ist!.

—> Purchase or Repair:
#NSK by Scott Boynton on 2008-04-14 22:16
Hello, I have a NSK ESA Y2020 drive that appears a blown optoisolator on the quadrature encoder output. The A, B, B*, Z and Z* channels work normaly, with a zero to five volt throw, but the A* channel only has about a half volt thow. Of course this is preventing it from working properly. Can you off…Purchase or Repair: Ticket Image...
Show More
#NSK by mdali on 2014-12-25 07:44
Hello, I am inquiring about part number NSK ESA 4-34018-700 described as a drive. My client is experiencing an issue with it. Can you please provide information on how we can proceed with repair or troubleshooting? Thank you.

—> Purchase or Repair:
#NSK by ANIL KUMAR P on 2008-08-21 09:05
Dear sir Please send english vertion manual of K20093-01-01 . PDF manual belongs to NSK servo drive model no. = ‚d‚w‚d‚`‚P|‚O‚O‚P‚O‚`‚O‚O|‚O‚RRegardsAnil

—> Purchase or Repair:
#NSK by Olaf Rekman on 2010-03-24 16:51
Dear sir,I am looking for a new or rebuilded NSK driver TYPE EMB014AF-2-05Please let me know.Regards - Olaf

—> Purchase or Repair:
#NSK by James Park on 2010-10-20 00:24
Hello,We have a upper and lower driver we need to get repaired. The type is ESA-B014CFC-21 and the NO. is B-13004-700. They both are not accurate so we were wondering if we can send them to you guys and have the calibrated. Please give me a call back or shoot me an email and hopefully we can figure …Purchase or Repair: Ticket Image...
Show More
#NSK by Alex Cheong on 2012-02-17 04:24
Dear Sir,We are trading company located in Malaysia looking for the possibility to repairing several type of OEM NSK DD motor and Driver as below,DD Motor type,1) M-JSB015FA503DD motor Drivers,2) M-ESA-D017-CF13) ESA-JB015CF3-204) M-EDC-PS3015CB5F5-01Kindly advise the possibility, prices, lead time,…Purchase or Repair: Ticket Image...
Show More
#NSK by Khoa on 2014-01-07 06:22
The NSK ESA 4-34018-700 is a drive unit that is currently not working. The maintenance team needs assistance in resolving the issue.

—> Purchase or Repair:
#NSK by Victor sciarrillo( delta steel) on 2012-01-23 16:36
We have a couple machines that use NSK drivesType:EM1010A15-05No. 103554-591The machine manufacturer said they are obsolete and can\'t sell us one. We willbuy new or rebuilt if you have either.

—> Purchase or Repair:
#NSK by Ray Paden on 2014-12-17 05:44
The NSK ESA 4-65006-700 drive unit malfunctioned today at 1045 AM, causing unexpected downtime on the production line. Can you quickly check the issue and provide a solution before the next shift starts? Thank you.

—> Purchase or Repair:
#NSK by Jesus Escobedo on 2009-10-02 17:48
We have a NSK Servo Drive in bad conditions, when we turn on the machine, never lit the green and red leds.I appreciate your comments, in case that you can to repair my servo drive.Cordially,Jesús EscobedoCNC Maintenance EngineerManufacturing Engineering DepartmentCalle 5 # 899, Zona IndustrialGuada…Purchase or Repair: Ticket Image...
Show More
#NSK by Mrs Mohan on 2007-05-24 13:41
The above mentioned drive needs repair.

—> Purchase or Repair:
#NSK by Leo Solomon on 2016-11-15 09:13
Gud DayThe NSK ESA-Y2003A23-21 driver that we have is having a big trouble on its communication , it wont make the motor to initialize, it only goes on one side of initialization and does not goes to its original position, but when we try to manually rotate it using handy controller configuration, i…Purchase or Repair: Ticket Image...
Show More
#NSK by Eric Ronnebaum on 2015-10-28 15:15
Dear sales I need a repair on a nsk RW1410FN523 motor. My customer is stating it making loader then normal noises and it harder to rotated by hand. The NSK amplifier is M-EP1410A15-05We would like to have a estimate if possible to go through it. I don\'t know if this is possible without looking at t…Purchase or Repair: Ticket Image...
Show More
#NSK by brecea on 2014-02-10 21:04
Could you please provide repair information for NSK ESA 4-34018-700 Drive? It's urgent, and we're on-site trying to get it fixed quickly. Thank you!

—> Purchase or Repair:
#NSK by Henri on 2014-01-05 10:53
Hello, I'm in the purchasing department and a colleague needs a replacement for an NSK ESA 4-65006-700 Drive. We can't locate one. Could you provide repair information? Thanks!

—> Purchase or Repair:
#NSK by RAFAEL LOYA on 2008-08-03 19:35
I HAVE A PROBLEM WHIT A SERVO DRIVE AMP ESA_Y3040T25-21, I NEED A CATALOG OF ITEM PLEASE THANKS ALL

—> Purchase or Repair:
#NSK by DAVID CONTRERAS on 2014-12-06 06:23
The NSK ESA 4-34018-700 drive unit isn't working.

—> Purchase or Repair:
#NSK by Alexander Zitnicky on 2014-12-19 22:44
The NSK ESA 4-65006-700 drive unit malfunctioned earlier today during the morning shift, leading to unexpected downtime. Can you provide a quick update on the issue before the next shift begins? Thank you.

—> Purchase or Repair:
#NSK by NormanLew on 2022-03-02 05:25
Hello. And Bye.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.