Procond Elettronica Service & Repair Forum

I replaced DZ1 and DZ4 for my Reebok ACD2 per Mark\'s comment, and it works fine now. Great thanks to Mark\'s info. -james

—> Purchase or Repair: Ticket Image

— Posted by james on 2007-11-28

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Procond Elettronica"

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 569 Comments

#Procond Elettronica by EDDY MEDINA on 2006-03-01 21:15
I have an MC-70 motor controller that is not working from a Reebok ACD2 treadmill and I would like to know how do I get this part repair or replace. Please call me at your earliest convenience at (1917)662-2892 or email me asap. Thanks EDDY MEDINA

—> Purchase or Repair:
#Procond Elettronica by Pouringjyy on 2022-01-11 08:42
Middle Ages as in Western

—> Purchase or Repair:
#Procond Elettronica by Sergio Dratwa on 2007-11-13 06:23
Elevation motor is working properly, drive motor does not starts.There are 2 diods that are burn: DZ1 and DZ4 (in between the relay and what look like to be 2 ceramic resistors). There is an overheat area on PCB under these diods, but PCB still OK.Would you sell me just the diods?If not, how should …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Brunet on 2018-01-04 09:08
HelloIs it possible to have a schematic or technical datasheet of this moduleProcond Elettronica 3560132009Thanks Martial Brunet

—> Purchase or Repair:
#Procond Elettronica by luth on 2007-07-04 15:33
I am reaching out on behalf of a client who needs assistance with a Procond Elettronica 453160320 141914 treadmill controller. Can you please provide information about potential repairs or replacements for this part? Thank you.

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a production line halt. Immediate repair service needed to resume operations.

—> Purchase or Repair:
#Procond Elettronica by Cristian on 2007-03-02 22:49
Hi, I\'ve a faulty Procond Elettronicatransformer for a switching power supply.The label says \"Procond Elettronica 411070276\"and the case is green.Can you help me in finding a replacement part ?ThanksCristian

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, affecting the production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
Do you have a Procond Elettronica power supply BF-PO67800-000 132022 available for repair or purchase? Our production is currently halted, and we need to get it running as soon as possible. Thank you.

—> Purchase or Repair:
#Procond Elettronica by heri on 2008-11-21 04:54
Procon Elettronica 411514410 SH.047.p.F(x2)+0.68M2x0.00. p.F (Y2)+2x0.5mH250V 50/60 Hz-16A/40\'CHMF 25/100/21EN.133200

—> Purchase or Repair:
#Procond Elettronica by fraz ahmad on 2010-12-07 09:26
Hihow are you, hope you are doing very well. i have this part at home, the problem is this some z are burned-out. . ..and i cant figure what the exact , voltages and watts of these ZsDZ2,DZ3, DZ4 and D10i have rough guess abt these parts, like DZ2 and Dz3 = 24V 1 wattplease reply. . . . and tell me …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Thomas Riis on 2011-11-18 07:29
Hi,We have a defect controller board : \"3560144009\" from Procond Elettronica.It fails by periodically stops the motor and heating elements. It seems that the ignition for the motor is unstable. For me it sounds like it is a moped / motorcycle with a bad ignition :-)Please could you inform me what …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Emilio Utrilla on 2013-06-03 17:10
Hello, I need where to buy or repair a Procond elettronica 3560089039 module and the price.Its for an EDESA dishwasherThank you.Hallo,Bonjour je recherche le module Procond elettronica 3560089039 (neuf ou réparation du vieil) pour un lave vaisselle EDESA et le prixMerciHola,Estoy buscando un módulo …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Marlene Duval on 2012-09-09 20:53
Would be glad if you couldt help me with a schematic diagram for my ESAM4200.Cod.Procond: 454010272Cod.De Longhi: 5232121200Wk: 49/08 Op:0043 SW:7.2For your effort many thks in advanceWith kind regardsMarleneDuval

—> Purchase or Repair:
#Procond Elettronica by Flashpaqmzt on 2021-11-18 14:10
elements (case, binding).

—> Purchase or Repair:
Hello! I am from Serbia, and I need the board GE Procond Elettronica Type P. 451510051 F: 4290 Type E. 12430392/5 SW Ver. W2C01250 . I was wondering if there is a shop in Serbia, so I can buy it from here, and if you don\'t have a shop there, is there any chance of ordering it from my country, by th…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by qmjLtxUZeNo on 2007-10-02 00:29
Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Procond Elettronica by Abdul Halim on 2007-08-09 14:55
Hello, I am interested in purchasing a Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I am trying to source one quickly. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Holographiccjr on 2022-01-03 08:52
multiplies (see also article

—> Purchase or Repair:
#Procond Elettronica by Orukwo Amaechi on 2012-03-24 09:17
Please get me quote urgently for a Procond Ellectronica capacitor/switch of 0.25 micro farad with part no 411135901 for dish washing machine. We need it to replace the faulty one on our dish washing machine with the following specification:ELX Model: LS9PPN: 9CGX50502215EL: AC 400 V3 N AC 230V/3/50H…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Istvan on 2007-02-08 16:32
The Procond Elettronica MC-70 124438 treadmill controller is displaying error code E-2, preventing the treadmill from function. Kindly advise on immediate troubleshooting steps. Thank you.

—> Purchase or Repair:
#Procond Elettronica by reza ramezani on 2013-03-30 07:57
The Procond Elettronica 356033305 47-90 circuit board is not working.

—> Purchase or Repair:
#Procond Elettronica by Gerald Harman on 2009-07-23 16:55
Please repair and tesT under load for satisfactory operation. Believe burn out at DZ1, dz4a, dz4b LOCATION ON BOARD.

—> Purchase or Repair:
#Procond Elettronica by pasha on 2007-04-24 19:20
Hello, I'm interested in purchasing the Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Esparza on 2007-04-05 00:56
I am following up on my previous message regarding the Procond Elettronica MC-70 124438 treadmill controller. The unit is still not functioning. Please provide assistance

—> Purchase or Repair:
#Procond Elettronica by Herberttep on 2021-11-25 06:17
economic crisis in pakistan essay 2020

—> Purchase or Repair:
#Procond Elettronica by Bulbon on 2006-12-19 16:01
Hello, I am inquiring about a Procond Elettronica MC-70 124438, which is a treadmill controller. My client is experiencing issues with it and would like more information on repair services available. Thank you.

—> Purchase or Repair:
The Procond Elettronica MC-70 #124438 unit is displaying abnormal behavior in the warehouse. More specifically, it is not functioning as it typically does and is exhibiting strange actions.

—> Purchase or Repair:
#Procond Elettronica by villain on 2011-05-17 07:30
Cherche module Brandt C 3220X/1

—> Purchase or Repair:
HI ThereI need a schematic over the above PCB. It is siiting in a Atlas NFS242 frezer

—> Purchase or Repair:
#Procond Elettronica by Nestor Juguera on 2008-05-26 23:32
need schematics for the 356069403 for even microwave delonghy mw605/3. Where can I get a copy?

—> Purchase or Repair:
#Procond Elettronica by Jasondow on 2022-06-04 15:08
Republican politicians all over the country have repeated the Great Replacement theory A century-old racist theory reentered the political discourse around immigration and has become commonplace on the campaign trail as Republicans hope to retake control of Congress in November.—> …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Arvi Raud on 2021-10-07 16:50
Hi, I need a display on the Fagor refrigerator 07-0992440circuit board barcode180809506006manufacturerProcond Elettronica

—> Purchase or Repair:
#Procond Elettronica by ADNAN HRNJIC on 2011-11-23 21:31
Hello,I would like to order part no.411312431 and how much it cost

—> Purchase or Repair:
#Procond Elettronica by RainMachinezda on 2022-02-06 00:31
(palimpsests). In the XIII-XV centuries in

—> Purchase or Repair:
#Procond Elettronica by KEN CLARK on 2007-08-09 15:55
Hi, I have a Procond Elettronica MC-70 124438 treadmill controller that needs repair. It is currently displaying an error message and not functioning properly. Looking for a technician to diagnose and fix the issue. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Mike Holzbauer on 2011-07-02 15:37
How much will it cost to get my circuit board repaired? Where can I send it, how long will it take?

—> Purchase or Repair:
#Procond Elettronica by Dwight Holder on 2006-06-20 22:34
I need DZ-1 and DZ-2 diodes or their values.Or what is the repair cost of this item.Thanks

—> Purchase or Repair:
#Procond Elettronica by Joseph on 2007-02-03 22:39
Can you please advise what it would cost to repair a MC-70 board for my Nordic Track treadmill? The power supply board has all the LED\'s lit (the PWM flashes only when it calls for speed). The motor works (I\'ve used a 12 vdc power supply to test). I\'ve also checked to make sure that 120Vac is sup…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by philip on 2007-04-04 00:19
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing a significant disruption to the production line. Urgent repair service is required to address this critical issue

—> Purchase or Repair:
#Procond Elettronica by Jamie Smith on 2006-12-18 10:04
The Procond Elettronica MC-70 124438 treadmill controller is not functioning properly.

—> Purchase or Repair:
#Procond Elettronica by HURTADO Alain on 2019-05-09 15:31
Bonjour je cherche une carte GE Pocond ElecttronicaType P. 451510133 F : 6154Type E. 132156810SW Ver. W2C01450. 50/02Pourriez-vous m'indiquer comment puis- je en acheter une ou faire réparer la mienne ?

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller is not working.

—> Purchase or Repair:
#Procond Elettronica by Kevin C McCurrie on 2007-07-13 00:19
Hi, I had the code E21 and had a repair service check all of the components. They concluded that the console had to be replaced and it isn\'t made anymore. I found one seller for $499.00 and it is too much. Its a shame because it was a good treadmill.

—> Purchase or Repair:
#Procond Elettronica by james on 2007-11-28 00:56
I replaced DZ1 and DZ4 for my Reebok ACD2 per Mark\'s comment, and it works fine now. Great thanks to Mark\'s info. -james

—> Purchase or Repair:
#Procond Elettronica by richard K blotz on 2013-08-17 22:32
The Procond Elettronica 356033305 47-90 circuit board is not powering on and causing production downtime.

—> Purchase or Repair:
#Procond Elettronica by Ketan J Bhatt on 2007-02-08 18:32
Hi there, we have a Procond Elettronica MC-70 124438 treadmill controller that needs repair. Can you provide repair information or suggest where we can find a replacement part? Thank you.

—> Purchase or Repair:
#Procond Elettronica by Sonny Ta on 2006-03-05 20:13
I need to find out what is the repair or replacement cost for this part , part # 124438, and the turn around time if I send it in. What is the best way to send in the part for repair ?orIf I decide to buy the part, how much would it cost ? Include shipping and Handling .Thanks.Sonny—> …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Chitfreerve on 2007-09-13 10:54
Could you please provide more information about the Procond Elettronica MC-70 124438 treadmill controller? We need to determine if it is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Laursen on 2007-09-18 20:05
Hello, I am interested in the Procond Elettronica MC-70 124438 treadmill board. Could you please provide information on its pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.