sim2 Service & Repair Forum

Drive or board failure detected on sim2 pc312.0 c60.0123.100 monitor during rounds. Will investigate and address shortly.

—> Purchase or Repair: Ticket Image

— Posted by Steve Van Booven on 2008-03-12

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "sim2"

If you need your sim2 unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 219 Comments

#sim2 by Giovanni Cabas on 2008-07-10 07:31
One of the drives or boards in sim2 pc312.0 c60.0123.200 monitor just failed. Need immediate attention and replacement.

—> Purchase or Repair:
#sim2 by NESTOR VERGANI on 2008-04-26 07:36
I'm experiencing an issue with the Sim2 PC312.0 C60.0123.200 monitor. It seems like something has stopped working, and I'm not quite sure what the problem could be. Any insights or advice would be greatly appreciated.

—> Purchase or Repair:
#sim2 by Ashokkumar on 2008-03-21 08:56
The SIM2 PC312.0 C60.0123.200 monitor is not working.

—> Purchase or Repair:
#sim2 by Gaurav on 2008-08-01 00:16
I'm having trouble with the sim2 pc312.0 c60.0123.100. The issue seems to be related to the monitor, but I'm not entirely sure what the problem is. Can you please provide assistance in troubleshooting this? Thank you.

—> Purchase or Repair:
#sim2 by Dave Schreiner on 2008-08-23 12:55
Hello, the sim2 pc312.0 c60.0123.100 monitor is not working.

—> Purchase or Repair:
#sim2 by feyyaz on 2008-03-16 06:28
Please confirm if you have a replacement unit available for SIM2 PC312.0 C60.0123.200 monitor. Our production is halted, and we need your support to keep operations running smoothly.

—> Purchase or Repair:
#sim2 by Ed salvagin on 2008-03-05 01:42
Hello, do you have a replacement Sim2 PC312.0 C60.0123.200 monitor available for sale or repair? Our unit is down, and we need it to keep production running. Thank you.

—> Purchase or Repair:
#sim2 by Ramiro García on 2008-07-12 10:15
Please let me know if you have a replacement Sim2 PC312.0 C60.0123.200 monitor available. Thank you.

—> Purchase or Repair:
#sim2 by Carlos Pio dos Reis on 2008-03-01 02:06
PC312.0 C60.0123.200 monitor not displaying any images.

—> Purchase or Repair:
#sim2 by Keith tattersall on 2008-03-07 07:30
Issue Sim2 PC312.0 C60.0123.200 monitor not displaying any output.

—> Purchase or Repair:
#sim2 by DominicJ. on 2008-02-29 21:06
Is the Sim2 PC312.0 C60.0123.200 monitor still supported or are replacement parts available for this older unit?

—> Purchase or Repair:
#sim2 by Eli Berkowitz on 2008-05-12 02:51
The Sim2 PC312.0 C60.0123.200 monitor unit experienced downtime today due to a technical issue. The incident occurred between 1130 AM and 145 PM. Could you provide insight into what may have caused this unexpected problem? Thank you.

—> Purchase or Repair:
#sim2 by DAVE ROSS on 2008-07-31 02:56
Our sim2 pc312.0 c60.0123.200 monitor is still down. Please provide assistance as soon as possible.

—> Purchase or Repair:
#sim2 by Anthonyseatt on 2008-01-22 20:19
The SIM2 PC312.0 C60.0123.200 monitor is displaying error code E203 and showing a black screen. Need urgent assistance to resolve the issue.

—> Purchase or Repair:
#sim2 by Van Hung on 2008-02-12 12:31
Sim2 PC312.0 C60.0123.100 monitor not displaying any image.

—> Purchase or Repair:
#sim2 by Ika on 2008-02-12 03:31
The sim2 pc312.0 c60.0123.200 monitor unit went down mid-shift. Please check and follow up in the morning. Thank you!

—> Purchase or Repair:
#sim2 by william deghetto on 2008-09-08 08:39
The sim2 pc312.0 c60.0123.200 unit is currently not working. It is related to monitoring.

—> Purchase or Repair:
#sim2 by Donald Van Orman on 2008-01-22 08:05
Can you provide information on the availability of a replacement for the sim2 pc312.0 c60.0123.200 monitor unit to keep production running smoothly? Thank you.

—> Purchase or Repair:
#sim2 by madhukar on 2008-10-17 16:22
Hello, we need repair info for SIM2 PC312.0 C60.0123.200 monitor. Can you provide details quickly? Thank you.

—> Purchase or Repair:
#sim2 by WilfredLeway on 2008-05-12 23:58
Hello, I need repair info for a Sim2 PC312.0 C60.0123.200 monitor. Can you provide details on how to fix it or where I can get a replacement? Thank you.

—> Purchase or Repair:
#sim2 by Amburgey on 2008-07-30 00:47
Our Sim2 PC312.0 C60.0123.200 monitor is still down. This issue needs immediate attention. Please provide an update as soon as possible.

—> Purchase or Repair:
#sim2 by carleen on 2008-03-21 10:53
the sim2 pc312.0 c60.0123.200 monitor went down mid-shift. Please check it out and follow up tomorrow. Thanks!

—> Purchase or Repair:
#sim2 by Stabel on 2008-03-10 14:52
We have a critical issue with the SIM2 PC312.0 C60.0123.200 monitor affecting the production line. Immediate repair service is needed to restore operations

—> Purchase or Repair:
#sim2 by Nugroho Joko Susilo on 2008-03-07 12:33
Can this Sim2 PC312.0 C60.0123.100 monitor be repaired or bought to resolve the issue? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:
#sim2 by Prabha Shankar Choubey on 2008-02-09 03:37
I have a sim2 pc312.0 c60.0123.200 monitor that needs repair. It isn't displaying any images or responding to inputs. Please let me know if you can help fix it. Thank you.

—> Purchase or Repair:
#sim2 by John Gemzsi on 2008-03-21 12:53
Could you please clarify whether the Sim2 PC312.0 C60.0123.200 monitor needs to be repaired or replaced? I am looking to get this sorted out and checked off my to-do list. Thank you.

—> Purchase or Repair:
#sim2 by Bracy on 2008-02-14 17:19
The SIM2 PC312.0 C60.0123.100 monitor unit is displaying erratic behavior. It is not functioning as it normally does and acting unusual.

—> Purchase or Repair:
#sim2 by Mike Bowman on 2008-03-05 03:42
The SIM2 PC312.0 C60.0123.200 monitor is malfunctioning, causing a halt in production line operations. Urgent action is required to get it repaired

—> Purchase or Repair:
#sim2 by Eusebio on 2008-05-20 18:29
Can you please confirm if the sim2 pc312.0 c60.0123.200 monitor is still supported or if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#sim2 by Brandon Park on 2008-03-13 02:05
The sim2 pc312.0 c60.0123.200 monitor unit experienced a malfunction during the night shift. Please investigate and address the issue

—> Purchase or Repair:
#sim2 by Hugo Iglesias on 2008-03-18 21:52
The sim2 pc312.0 c60.0123.200 monitor is not working.

—> Purchase or Repair:
#sim2 by Tod on 2008-09-14 23:51
The SIM2 PC312.0 C60.0123.200 monitor unit is not working.

—> Purchase or Repair:
#sim2 by Allen Sutfin on 2008-02-22 15:26
Please provide assistance with sim2 pc312.0 c60.0123.200 monitor. Thank you.

—> Purchase or Repair:
#sim2 by AMELIA on 2008-02-19 19:30
I'm sorry to hear that your SIM2 PC312.0 C60.0123.100 monitor is acting up. It seems like something stopped working, but I'm not exactly sure what's causing the issue. I recommend reaching out to technical support for assistance in diagnosing and fixing the problem.

—> Purchase or Repair:
#sim2 by Jeremiah Foertsch on 2008-03-22 08:53
SIM2 PC312.0 C60.0123.200 monitor issue Drive or board failure detected during maintenance rounds. Please assign a replacement ASAP.

—> Purchase or Repair:
#sim2 by Doak on 2008-03-10 13:52
The SIM2 PC312.0 C60.0123.200 monitor is not working.

—> Purchase or Repair:
#sim2 by Partida on 2008-11-14 13:14
Please provide an update on the current status of the Sim2 PC312.0 C60.0123.200 monitor. It is still not functioning, and we need assistance immediately. Thank you.

—> Purchase or Repair:
#sim2 by Richter on 2008-02-26 12:13
Hello, I need repair info for a SIM2 PC312.0 C60.0123.200 monitor. Something has stopped working, and we need a replacement. Please send repair details ASAP. Thank you.

—> Purchase or Repair:
#sim2 by Andersen on 2008-06-29 05:40
Monitor not displaying any image on sim2 pc312.0 c60.0123.200.

—> Purchase or Repair:
#sim2 by Chad on 2008-03-21 00:56
The sim2 pc312.0 c60.0123.200 monitor experienced downtime today at 1045 AM. We are currently investigating the cause. Can you provide any insights or assistance before the next shift starts?

—> Purchase or Repair:
#sim2 by JULIAN DE LA GARZA on 2008-09-14 11:16
Sim2 PC312.0 C60.0123.100 monitor issue reported. Drive or board failure detected during rounds, immediate action required.

—> Purchase or Repair:
#sim2 by Borg on 2008-02-26 11:13
I'm having trouble with the SIM2 PC312.0 C60.0123.200. It seems to be a monitor, but it's not working. I'm not exactly sure what the issue is, but I would appreciate any assistance you can provide.

—> Purchase or Repair:
#sim2 by renante on 2008-09-19 19:02
Hello, I am interested in purchasing a sim2 pc312.0 c60.0123.100 monitor. Can you please let me know about pricing and availability? I am trying to source one quickly. Thank you!

—> Purchase or Repair:
#sim2 by Oliver Lee Brooks on 2008-02-17 11:25
Do you have a sim2 pc312.0 c60.0123.200 monitor available for repair or purchase? Production is down and we need a solution quickly.

—> Purchase or Repair:
#sim2 by Senarathne on 2008-11-21 23:35
Looking for repair for sim2 pc312.0 c60.0123.200 monitor. Unit not displaying video. Need assistance urgently.

—> Purchase or Repair:
#sim2 by Hope Uwaya on 2008-10-05 01:08
Hello, I hope this message finds you well. I'm interested in purchasing the Sim2 PC312.0 C60.0123.100 monitor unit. I'm not completely certain if this is the exact model I need, but my team recommended I reach out to inquire about pricing and availability. I'm looking to source one quickly, so any i…Purchase or Repair: Ticket Image...
Show More
#sim2 by Des Whitaker on 2008-06-03 03:47
The SIM2 PC312.0 C60.0123.100 monitor unit experienced technical issues, causing downtime. This occurred earlier today during the morning shift. Please provide assistance as soon as possible to resolve the problem before the next shift starts. Thank you.

—> Purchase or Repair:
#sim2 by ATEF OSMAN on 2008-02-14 21:19
Sim2 PC312.0 C60.0123.200 monitor is displaying a blank screen.

—> Purchase or Repair:
#sim2 by Goulet on 2008-05-28 19:10
The SIM2 PC312.0 C60.0123.100 monitor is currently displaying the error code E122 and is not powering on. Please advise on troubleshooting steps. Thank you.

—> Purchase or Repair:
#sim2 by Sanjay on 2008-01-15 18:35
Please provide the necessary details so we can check if the Sim2 PC312.0 C60.0123.200 monitor is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.