NSK Service & Repair Forum

Hello. And Bye.

—> Purchase or Repair: Ticket Image

— Posted by NormanLew on 2022-03-02

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "NSK"

If you need your NSK unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 96 Comments

#NSK by Andy on 2007-10-08 13:13
I from Russia.We do not have service NSK.I have read through the message I wish to ask. Service a manual is necessary to me.At me has deteriorated ESK-Y4080FT1-20 the driver.The ballast resistor 200 Ohms and the field transistor 2SK2662 burns down.I want the scheme or consultation.—> …Purchase or Repair: Ticket Image...
Show More
#NSK by Kohlbrenner Chris on 2008-02-11 08:31
Hello, we have a Problem with an NSK \"ESA Y2020 TF6-20\", No: 2-05407-700. It shows \"F 4\" on the Display and we don\'t know, what that means. Please send us an Answer as soon as possible.Please send us also a list of every possible Alarm, which could be shown on the Display.The Adress is above, p…Purchase or Repair: Ticket Image...
Show More
#NSK by Anand on 2009-06-27 11:07
Dear repair center,We need to repairing NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!Warm regardsAnand

—> Purchase or Repair:
#NSK by Singletary on 2014-12-05 00:23
Do you have an NSK ESA 4-65006-700 drive available for sale or repair? Need it urgently to keep production running smoothly. Thank you.

—> Purchase or Repair:
#NSK by Scott Boynton on 2008-04-14 22:16
Hello, I have a NSK ESA Y2020 drive that appears a blown optoisolator on the quadrature encoder output. The A, B, B*, Z and Z* channels work normaly, with a zero to five volt throw, but the A* channel only has about a half volt thow. Of course this is preventing it from working properly. Can you off…Purchase or Repair: Ticket Image...
Show More
#NSK by mdali on 2014-12-25 07:44
Hello, I am inquiring about part number NSK ESA 4-34018-700 described as a drive. My client is experiencing an issue with it. Can you please provide information on how we can proceed with repair or troubleshooting? Thank you.

—> Purchase or Repair:
#NSK by TOMAS MARIN on 2010-07-02 23:25
I GOT A PROBLEM BUT I DONT KNOW WHERE COULD BE IF IN MOTOR OR IN DRIVE MY DRIVE IS AN NSK ESA Y3040TF120 AND THE MOTOR THE FAULT ON THE DRIVE IS F-1 AND A- 4 AND THE MAIN PROBLEM IS ON THE TOURRET INDEXING SO I CAN NOT SEE ON DYSPLAY THE NUMBER OF THE TOOL

—> Purchase or Repair:
#NSK by Moises Tovar on 2008-07-09 14:51
I need a NSK driver part no. EE0608A05-25 SERIE. 065221

—> Purchase or Repair:
#NSK by yasser on 2009-12-05 13:34
good evening .i hope all stuff ok. plz i have proplem, in my netestal machine about robot moving hand .this problem come from servo drive give me error f4 and i read in book its friom emergency switch but i check all emergency ok. i try another drive it work and give letter C but problem difference …Purchase or Repair: Ticket Image...
Show More
#NSK by Ray Paden on 2014-12-17 05:44
The NSK ESA 4-65006-700 drive unit malfunctioned today at 1045 AM, causing unexpected downtime on the production line. Can you quickly check the issue and provide a solution before the next shift starts? Thank you.

—> Purchase or Repair:
#NSK by Rodolfo Vargas Santamaria on 2009-09-04 19:07
I have Motor Drive Type ESA-0810A35-21.1 NO. 0812484This device sent to display the code letter P - 1 and put the power light yellow color.My question is what is this code

—> Purchase or Repair:
#NSK by Alex Cheong on 2012-02-17 04:24
Dear Sir,We are trading company located in Malaysia looking for the possibility to repairing several type of OEM NSK DD motor and Driver as below,DD Motor type,1) M-JSB015FA503DD motor Drivers,2) M-ESA-D017-CF13) ESA-JB015CF3-204) M-EDC-PS3015CB5F5-01Kindly advise the possibility, prices, lead time,…Purchase or Repair: Ticket Image...
Show More
#NSK by Hans van der Hoorn on 2025-06-01 18:27
The NSK EM1010A15-05 drive unit is not working. Please check and repair.

—> Purchase or Repair:
#NSK by ANIL KUMAR P on 2008-08-21 09:05
Dear sir Please send english vertion manual of K20093-01-01 . PDF manual belongs to NSK servo drive model no. = ‚d‚w‚d‚`‚P|‚O‚O‚P‚O‚`‚O‚O|‚O‚RRegardsAnil

—> Purchase or Repair:
#NSK by SABINUS on 2025-05-23 13:43
Hello, do you have an NSK ESA-B014CFD-21 driver available for sale or repair? Need it urgently for production. Thank you.

—> Purchase or Repair:
#NSK by valerio hernandez on 2024-08-20 13:55
The NSK ELA-B014CFC-03 unit in the warehouse is displaying unusual behavior; it's not functioning as it normally does. Please investigate the issue further to determine the cause and potential solution.

—> Purchase or Repair:
#NSK by BesterPreisvergleich on 2011-12-04 10:31
Hallo, ich habe eine tolle Seite entdeckt,bei der man einfach den billigsten Preis für allerlei Dinge suchen kann. Hier ist der link Bester Preisvergleich Ach ja, ausserdem findet man dort jede Menge Gutscheine, was natürlich toll ist!.

—> Purchase or Repair:
#NSK by Schwaertzel on 2014-04-14 20:32
NSK ESA 4-65006-700 drive is malfunctioning, halting the production line. Urgent repair service needed to fix the issue immediately.

—> Purchase or Repair:
#NSK by Chester Yong on 2010-08-12 09:15
dear sir,I would to check that do you able to repair this NSK driver model: ESA 23?

—> Purchase or Repair:
#NSK by azadeh on 2014-05-01 22:20
Hello, our NSK ESA 4-65006-700 drive is down with error code E302. Urgent assistance needed to troubleshoot and resolve the issue. Thank you.

—> Purchase or Repair:
#NSK by Al Urbonas on 2025-05-22 08:40
The NSK ESB014CF1-01A is not functioning properly. Please check and repair as needed. Thank you.

—> Purchase or Repair:
#NSK by Mark Proctor on 2007-04-03 10:08
NSK ES3040K23-03 Servo DriveHi, We have an NSK ES3040K23-03 servo drive that requires repair.Do you have a fixed price repair on this unit?Please advise as soon as possible.ThanksMark Proctor

—> Purchase or Repair:
#NSK by karim on 2006-03-06 00:00
NSK 4083141 showing no power or response when turned on. Need immediate repair service to diagnose and fix issue.

—> Purchase or Repair:
#NSK by Andy on 2012-11-29 23:44
We are working on our study thesis and our problem is we can\'t get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. There\'s no C2 warning on the Display. Any ideas what could be the problem of the drive and how we could possible sol…Purchase or Repair: Ticket Image...
Show More
#NSK by NormanLew on 2022-03-02 05:25
Hello. And Bye.

—> Purchase or Repair:
#NSK by MARIO BALANDRAN on 2013-02-06 23:44
we are look9ing for KSK drive EE1010A98-25

—> Purchase or Repair:
#NSK by suresh on 2009-02-16 17:39
we bought RF TX and RX encoder decoder kits from nsk electronics.but when we use our modules there is no output.if we come to u whether u test it

—> Purchase or Repair:
#NSK by HOVANEC on 2025-06-07 00:25
Can the NSK ESB014CF1-01A drive be repaired or replaced? I'm trying to check this off my to-do list. Thank you!

—> Purchase or Repair:
#NSK by Navjot Singh on 2007-09-24 11:06
plz email the detail Manual and Software for NSK Servo ESA B045Af3-21 . with Regard Navjot Singh

—> Purchase or Repair:
#NSK by thiagu on 2008-02-27 03:35
hi, im looking for nsk controller which the model no is EM0608A15-05. I aloso got 1 faulty controller need to be repair. pls send me the quotation togather with trasportation.

—> Purchase or Repair:
#NSK by Jesus Escobedo on 2009-10-02 17:52
We have a NSK Servo Drive in bad conditions, when we turn on the machine, never lit the green and red leds.I appreciate your comments, in case that you can to repair my servo drive.Cordially,Jesús EscobedoCNC Maintenance EngineerManufacturing Engineering DepartmentCalle 5 # 899, Zona IndustrialGuada…Purchase or Repair: Ticket Image...
Show More
#NSK by Virgil on 2014-12-28 10:06
NSK ESA 4-65006-700 drive just failed, need urgent attention. Moving to next machine now to continue rounds.

—> Purchase or Repair:
#NSK by mansuk hong on 2008-04-09 05:20
I\'d like to get a manual for nsk that is ESB014CFI-01A.I\'VE GOT A PROBLEM THAT IS E0-A ON THE DISPLAY I\'M NOT SURE WHAT DOES IT MEAN?COULD YOU TELL ME ABOUT THAT PROBLEM.

—> Purchase or Repair:
#NSK by Vacev on 2014-12-27 00:06
Could you please provide me with information on pricing and availability for the NSK ESA 4-65006-700 Drive? I am interested in sourcing one quickly. Thank you.

—> Purchase or Repair:
#NSK by Marhaeni Tambrin on 2009-05-29 06:06
Dear Sir / MadamWe need repair or buy servo drive M-ESA-Y2020 G23have you an office or desk manager in Indonesia or Singapore ?We will appreciate for your immediately reply.Best Regards,MarhaeniPurchasing of PT. Akeda Multi MediaJl. KH. Moh. Mansyur No. 11 Blok B 8-12Jakarta 10140 - INDONESIA.Telp. …Purchase or Repair: Ticket Image...
Show More
#NSK by BIOTECH on 2014-12-03 23:23
Can this NSK ESA 4-65006-700 Drive be repaired or bought? I am looking to check this off my to-do list.

—> Purchase or Repair:
#NSK by Mcguinness on 2014-12-23 15:06
Please provide me with detailed information about the NSK ESA 4-34018-700 Drive. We are looking into the possibility of finding replacement parts or repair options for this unit. Could you please confirm if it is still supported or if any parts are available for it? Thank you. —> …Purchase or Repair: Ticket Image...
Show More
#NSK by Moises Tovar on 2009-06-03 21:56
I need a Nsk driverEE0608A05-24.2 or substituteThank you

—> Purchase or Repair:
#NSK by Des on 2014-05-03 07:20
Hello, I am interested in purchasing the NSK ESA 4-34018-700 Drive. I am looking to source one quickly and wanted to inquire about pricing and availability. Thank you!

—> Purchase or Repair:
#NSK by Olaf Rekman on 2011-05-19 14:41
Dear Sir,I am looking for a programming terminal for NSK driver type EMBO14AF2 Looking forward to hear from You,Best regardsOlaf RekmanStokkanhaugen 1167048 Trondheim – NorwayPhone +47 90963306olafrekman@gmail.com

—> Purchase or Repair:
#NSK by Eric Ronnebaum on 2015-10-28 15:15
Dear sales I need a repair on a nsk RW1410FN523 motor. My customer is stating it making loader then normal noises and it harder to rotated by hand. The NSK amplifier is M-EP1410A15-05We would like to have a estimate if possible to go through it. I don\'t know if this is possible without looking at t…Purchase or Repair: Ticket Image...
Show More
#NSK by Maher Amara on 2011-11-16 11:48
If it\'s possible to repqir the SERVO DRIVE NSK type EMOAOBK13-05SPR-T4/Z-NS

—> Purchase or Repair:
#NSK by Tom on 2007-03-03 02:20
Can you repair a ESLZ10CF1-01 drive and what is the turn around time? We have been sending these to another repair facility but we get about 20% of them back saying unable to repair. Can you help us ?ThanksTom

—> Purchase or Repair:
#NSK by Animesh on 2008-09-25 15:52
I have got a problem that the servo motor is getting fault.How could I repair when I get P1,P2 such kind of warning.

—> Purchase or Repair:
#NSK by Gilberto Saraiva on 2008-03-14 00:18
Good Morning:I need the manual of servo drive EM0608A05-05 NSK. Could you help-me please?.Thanks a lot

—> Purchase or Repair:
#NSK by Vishnumurthy on 2010-04-16 14:46
Please send me the PDF for type ESA-B045AF3-21 number B-2X011-700.And also provide the service center name/ details in Bengaluru, Karnataka, India.RegardsVishnumurthy

—> Purchase or Repair:
#NSK by Tafheem on 2013-04-30 00:00
NSK ESA-Y3008A25-21 power supply unit is not turning on despite being plugged in. Need immediate repair assistance.

—> Purchase or Repair:
#NSK by Mrs Mohan on 2007-05-24 13:41
The above mentioned drive needs repair.

—> Purchase or Repair:
#NSK by Mendieta on 2014-12-17 00:44
Hello, the NSK ESA 4-34018-700 Drive unit is still down. Please provide an update

—> Purchase or Repair:
#NSK by Chansac on 2014-02-13 07:58
NSK ESA 4-34018-700 is showing error code E403 and not responding. Need urgent assistance to troubleshoot and restore operation.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.