Westronics for Service call 1-336-969-0110 at Industrial Electronics Repair

Westronics Service & Repair Forum

I am a business customer with a Westronics SM100 Servo Drive unit that is not functioning properly. The unit is failing to respond to commands, resulting in erratic movements and inconsistent performance. Based on the initial assessment, the repair cost is estimated to exceed $1000 due to the complexity of the servo drive system.

— Posted by Sharon Casey on 2006-09-13

Reply🗨️Ask a New Question Below❓

If you need your Westronics unit tested or repaired,
give us a call at 1-336-969-0110.
We offer fair estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 25 Comments

#Westronics by Joe Harvat on 2006-01-31 00:00

Looking for repair service for a malfunctioning Westronics CB100351-01 MUX 64 Point unit. experiencing intermittent signal loss and data transmission issues. Need assistance urgently.

#Westronics by david suh on 2006-07-25 01:36

==Urgent==To whom who may concered- ==Urgent==As we are one of the user of the Westronics: Model DDR10 & Part PA100056-01 Power Supply Cards , there was power problem. The fuse was out of order & we have changed to new one(same specification from original sources) for 3 times.( Replaced the ...
Show More

#Westronics by Sharon Casey on 2006-09-13 23:11

I am a business customer with a Westronics SM100 Servo Drive unit that is not functioning properly. The unit is failing to respond to commands, resulting in erratic movements and inconsistent performance. Based on the initial assessment, the repair cost is estimated to exceed $1000 due to the comple...
Show More

#Westronics by Tasha Chapman on 2006-09-14 14:51

In order to comply with the Duke Energy internal Asbestos Policy, we are required to insure that no products or components containing asbestos are procured. We are contacting all Duke Suppliers of valves, pump, motors, and actuators to obtain a statement via e-mail or fax that their company does not...
Show More

#Westronics by Joe Sayre on 2007-05-29 22:23

We received new printed circuits P/N CB100161-02 for a Westronics DDR10 Recorder. The new circuits are stamped with a Rev. H. the previous Circuits were stamped with Rev.D.I need help what is the difference in design change between Rev. D and Rev.H. Are there drawings available for both board revisi...
Show More

#Westronics by Henning Hamann on 2008-02-26 07:13

Hallo,I need the price and the availability for a Grounding resistance montitor, Supply Voltage AC 110V 60Hz, for 440V bus,Serieal No.: 9C09106, Type SBAG-102 Main switch borad# M4-8235\'41Built in 1999, Manufacturer \"Westronics\"\"Seobu el\" KoreaI Need the price for a new one....
Show More

#Westronics by Naresh Santal on 2008-10-08 09:13

Respected Sir/MadamI have purchased one power addepter ( O/P +24 V, 2A) from the market.I want to know that whether these westronics made addepters are made specialy for ALLWIN water purifires.

#Westronics by stuart Rudge on 2009-06-26 12:28

Hello sales, are Westronics still in business? I have searched the internet but coming up with nothing apart from a few sites. I am looking for a Grounding resistance monitor type: SBDG 241.I require price & delivery for 1 piece to Southampton, UK.Regards Stuart Rudge

#Westronics by Naseem Ahmad on 2010-01-30 19:04

Dear Sir,We would like to inform you that,Digital Data recorders has already installed at Power Plant in pakistan and I am looking source of Westronics company who can supply spare parts for DDR-3200 if yes then please complete e-mail address for company so that,we will start sending inside informat...
Show More

#Westronics by mariolis georgios on 2010-02-11 13:14

Good day Sir/Mr(s)I would like to find the manual concerning the terminals of the model above but unfortunatelly i can\'t.I would appreciate if you could mail me this document.Thank you in advanceMariolis Georgios

#Westronics by Richard Swain on 2010-04-20 11:08

Need 1pcs of ZA-100036-01MAGAZINE CHART

#Westronics by Cornleis (KC) Kome on 2010-07-13 22:53

I have a Westronics Model SVC chart recorder, ser no. 2675, (1/99) and can not find the WGetData 3.5\" floppy that came with the unit, can you provide a copy of it, thanks !!!

#Westronics by Asheen Inderpal on 2011-02-16 11:42

Good day,I have an enquiry to quote for the following items:1)GROUNDING RESISTANCE MONITOR(INSULATON),MANUFACTURER:WESTRONICS/SEOBU ELECTRONICS- 102,AC110V60HZ,5UA. QNTY:12)GROUNDING RESISTANCE MONITOR :CO-SBG-241D,DC19-30V.0.001-0.2MOM ALARM.QNTY-1,MADED,WESTRONICS./SEOBU ELECTRONICS3)GROUP ANNUNCI...
Show More

#Westronics by ACE IVEY on 2011-02-25 16:25

PLEASE ADVISE, I NEED INFORMATION ON PRICING AND AVAILABILITY ON THE FOLLOWING ITEM:EARTH GROUNDING RESISTANCE MONITOR, MAKE: WESTRONICSTYPE: SBAG-202MANY THANKS FOR YOUR ASSISTANCE ON THIS MATTER. I AM LOOKING FORWARD TO YOUR SOONEST REPLY.

#Westronics by Jim Lee on 2011-09-19 14:52

We have a Westronics 3200 Temperature scanner, S/N 1088, we\'d like to know if it could be repaired? It may need chart drive motor, P/N MA100018-01,circuit board, P/N CB100341-04, printhead cartridge motor, P/N MA100015, and power supply, ZB100798-01. The MUX would be sent with unit, not sure if it\...
Show More

#Westronics by k johnpaul on 2011-12-02 15:35

One of our sensor monitor out put is -5 MA against the full scale out put of 1 MA. The sensor is in alarm condition. The insulation indicator needle is in the -ve direction, kindly advise.

#Westronics by Olejnik Leszek on 2012-01-01 04:39

Manual and documentation for PCB

#Westronics by Vision on 2012-06-04 03:07

Dear Sirs, We are the company in Qingdao of China, we need the machines of your company as follows:micom timer (slim type) type GTN ¨C S1, range 0,1s ¨C 1h 24VDC, 110/240VAC please kindly send us the quote to Qingdao as soon as possible! with kind regards

#Westronics by Geir Mordal on 2012-08-22 05:03

Good morning Madames / SirsWe do have a request for following:Ground Resistance monitor.1 pc. SBAG-202 External meter FS 1 rnACan you provide us with quote / delivery time of this.Thanks in advance.Best regardsGeir Mordal

#Westronics by Russell Harriman on 2013-06-01 00:45

Hello,I am looking to purchase a replacement unit as well as circuit board cards for The Westronics line fault detector models LFD-10P and LFD-6P. Ships Superintendent

#Westronics by Dmitry Gavrilenko on 2014-03-02 08:14

Good DayPlease give me a User\'s Manual for the above mentioned line falt detector. I have to modify the existing circuitry in my switchboard to make it fail-to-safe. This unit has been retrofitted and I cannot see any data onboard.thanks in advance

#Westronics by Helgert on 2014-03-04 00:00

Machine Issue Westronics CB100356-02 board not powering on, causing production downtime.

#Westronics by Richard Zelm on 2015-06-26 17:04

Can you please tell me what the measurement voltage is that the SBAG Ground Monitor uses to monitor the insulation? Is it 24 VDC? I can\'t find anything in their specs that tells you what the output voltage is that monitors the insulation. Thanks!

#Westronics by john and anna scarle on 2018-04-20 00:00

Hello, the Westronics 3000 is not powering on. Looking for assistance with diagnosing and fixing this issue

#Westronics by J.Y. HENRY on 2024-11-08 00:00

Repair Inquiry for Westronics 3000 PrinterHello,I am reaching out on behalf of our client with a Westronics 3000 Printer (part number not available) that is experiencing some issues. The printer is not functioning properly and is in need of repair. Could you please provide information on the repair ...
Show More

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.