Siemens Service & Repair Forum

The Siemens 6ES5 242-1AA32 experienced a malfunction today, causing downtime in the production unit. The issue occurred at 1130 AM and is critical for our operations. Any quick information on what went wrong would be greatly appreciated before the next shift. Thank you.

—> Purchase or Repair: Ticket Image

— Posted by MUSOVSKI on 2024-06-14

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Siemens"

If you need your Siemens unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 121 Comments

#Siemens by John Montana on 2022-05-16 05:14
Hello, I was informed that the Siemens 6SL3210-1PB13-0AL0 unit, which is a SINAMICS G120 Power Module, is not functioning. Can you provide more details about the issue so we can troubleshoot and resolve it

—> Purchase or Repair:
#Siemens by SEGOVIA on 2025-05-20 08:30
Seeking repair for Siemens 6ES5 246-4UA31 S5 PLC IP246 Inc.Positioning Module, currently not functioning. Please respond if you can assist with repairs. Thank you.

—> Purchase or Repair:
#Siemens by Jason Beveridge on 2014-03-30 19:16
Hi, I'm experiencing an issue with my Siemens Acramatic 2100 3-424-2130A01. The screen is blank and unresponsive, showing no error codes or alarms. Need urgent assistance to diagnose and fix the problem.

—> Purchase or Repair:
#Siemens by Yng on 2011-11-23 20:06
Siemens 65E3226 8DJ40 drive is down, displaying error code 5B. Urgent repair needed to resume operations.

—> Purchase or Repair:
#Siemens by ALEJANDRO PRIETO on 2014-01-27 18:30
Our Siemens Acramatic 2100 3-424-2130A01 monitor/controller experienced a malfunction, causing downtime on the production line earlier today. This happened at 330 PM during the afternoon shift. Can you provide a quick response before the next shift starts?

—> Purchase or Repair:
#Siemens by Jaime Palacios on 2011-09-05 12:37
Experiencing issues with my Siemens 685139 E1721-A88 circuit board. Need repair for industrial unit ASAP. Any experts available for troubleshooting and fixing the problem?

—> Purchase or Repair:
#Siemens by williams on 2025-05-15 23:04
Hello, I am inquiring about Siemens 6ES7 441-2AA01-7AG0 module. My client is experiencing issues with it and needs assistance. Can you please provide information on repair services available for this module? Thank you.

—> Purchase or Repair:
#Siemens by Chris Werner on 2011-06-10 17:24
Siemens 65E3226 8DJ40 drive not responding to control inputs.

—> Purchase or Repair:
#Siemens by Sukmawan on 2017-02-15 00:00
Hello,Thank you for reaching out. It sounds like the Siemens 6av6-643-0ba01-1ax0 unit in the warehouse is exhibiting unusual behavior. Could you please provide more details on what specifically is happening? For example, is the display not working properly, are buttons unresponsive, or is there any …Purchase or Repair: Ticket Image...
Show More
#Siemens by radu munteanu on 2022-11-17 10:40
Siemens 6DD1681-0GK0 Converter Module Simadyn SU13 is malfunctioning, displaying error code XYZ. Equipment is currently down, urgent assistance needed. Please advise on next steps for repair.

—> Purchase or Repair:
#Siemens by JAE on 2014-02-12 17:58
The Siemens Acramatic 2100 3-424-2130A01 unit is not working and the maintenance team needs assistance with it.

—> Purchase or Repair:
#Siemens by Lawrence Ham on 2007-03-18 00:00
Siemens 6es5441-7la11 showing no power or response when powered on. Urgently seeking repair service to diagnose and fix the issue.

—> Purchase or Repair:
#Siemens by anupam on 2011-12-19 14:42
Siemens 685139 E1721-A88 circuit board failure on the shop floor. Need immediate replacement to resume production.

—> Purchase or Repair:
#Siemens by ramson on 2011-03-30 21:08
Hello, I am reaching out on behalf of my client who is experiencing an issue with their Siemens 685139 E1721-A88 circuit board. Could you please provide more information about potential repair options and pricing for this particular part? Thank you.

—> Purchase or Repair:
#Siemens by felipe vargas on 2023-06-10 16:50
Urgent Downtime Report - Siemens 6SN1145-1BA00-0BA0 Power Supply ModuleDear Team,I am reporting an unexpected downtime caused by the Siemens 6SN1145-1BA00-0BA0 Power Supply Module. The unit experienced a failure at approximately , resulting in a loss of power supply to crucial equipment.We need to u…Purchase or Repair: Ticket Image...
Show More
#Siemens by Dirk Dillbohner on 2025-05-18 12:36
Looking for repairs for a Siemens 6KA000-OCT/PTOO Inverter PCB as it's no longer functioning correctly. Need someone capable with experience in industrial unit repairs. Thank you.

—> Purchase or Repair:
#Siemens by Basheer on 2024-11-12 14:38
The Siemens 6SN1145-1BB00-0FA1 Simodrive E/R Module Int. 120/156KW unit is not working properly.

—> Purchase or Repair:
#Siemens by GERALD M SULLIVAN on 2008-12-05 00:00
I'm currently experiencing some issues with the Siemens 6es 5243-1ab11. The machine has stopped working, but I'm unsure about the specific problem as the description is unknown to me. Any guidance or support to troubleshoot and resolve this would be greatly appreciated.

—> Purchase or Repair:
#Siemens by Maskovich on 2023-07-02 23:28
Machine displaying error message "No communication with CNC control."

—> Purchase or Repair:
#Siemens by Yves Janin on 2024-11-17 11:17
Siemens 6ES7 212-1BA00-4BA0 S7 Module malfunctioning, affecting production line. Urgent repair needed to resume operations.

—> Purchase or Repair:
#Siemens by David Smith on 2011-02-01 09:03
Our Siemens 65E3226 8DJ40 drive is still down. We need immediate assistance. Please respond

—> Purchase or Repair:
#Siemens by jean on 2011-04-14 21:54
Could you please provide information on whether the Siemens 65E3226 8DJ40 drive is still supported or if replacement parts are available? It would be great to know if there are repair options for this unit. Thank you.

—> Purchase or Repair:
#Siemens by Sergey Perov on 2012-06-23 00:00
Siemens 6SE3114-0DC40 showing no response or power when activated. Need assistance troubleshooting and repairing this industrial unit

—> Purchase or Repair:
#Siemens by HATIM on 2025-05-19 18:06
Siemens EK-75-10-3-B equipment is down. Showing error code Hammersteuer Ung on the Controller Module. Need urgent repair. Please advise.

—> Purchase or Repair:
#Siemens by J Murphy on 2011-04-23 22:25
One of the Siemens 65E3226 8DJ40 units in the warehouse is displaying unusual behavior. It's not functioning as it normally does, and its actions are erratic and unpredictable.

—> Purchase or Repair:
#Siemens by S,.N. on 2011-02-06 17:42
Siemens 685139 E1721-A88 is showing error code "E1721-A88 Circuit Board Failure". Equipment is completely offline. Please advise on next steps for repair.

—> Purchase or Repair:
#Siemens by Belyakov on 2018-10-14 04:56
Siemens 6SE70337EG841JF0 inverter interface just failed. Needs immediate attention!

—> Purchase or Repair:
#Siemens by mike garcia on 2024-11-14 10:04
Can the Siemens 6ES7321-1BL00-0AA0 be repaired or replaced? I'm trying to address this task on my to-do list. Thank you.

—> Purchase or Repair:
#Siemens by Ray Buckman on 2011-11-11 22:27
Experiencing error code E1721-A88 on Siemens 685139 circuit board. Equipment currently down, urgent repair needed to resume operations.

—> Purchase or Repair:
#Siemens by james yates on 2011-11-02 10:12
Siemens 685139 E1721-A88 circuit board not responding, production halted.

—> Purchase or Repair:
#Siemens by Pair on 2014-02-17 20:12
Can the Siemens Acramatic 2100 3-424-2130A01 Monitor/Controller be repaired or replaced? Trying to check this off my to-do list.

—> Purchase or Repair:
#Siemens by chisty on 2023-07-06 01:40
The Siemens PE0520 is displaying a red flashing LED indicating a low input voltage alarm. Machine is currently not operational. Thanks.

—> Purchase or Repair:
#Siemens by Ismail Manaqibwala on 2021-11-01 14:40
The Siemens 6SL3000-0DE25-5AA1 unit for the 55kW active line module is not working.

—> Purchase or Repair:
#Siemens by Motairi-Al, on 2011-06-17 13:57
the Siemens 685139 E1721-A88 circuit board unit went down mid-shift. Need someone to check it out ASAP.

—> Purchase or Repair:
#Siemens Sitop by Grachev on 2011-09-21 00:00
The Siemens Sitop 6EP1437-2BA00 control panel has failed; currently unsure about the description. I'll inspect and troubleshoot further once I reach the machine.

—> Purchase or Repair:
#Siemens by justin igarashi on 2007-09-10 00:00
Urgent Equipment Issue - SIEMENS SINUMERIK PCU 50.3-CHello,Our SIEMENS SINUMERIK PCU 50.3-C is down and displaying an unknown error. The system is not responding, and we are unable to access any functions. Urgent assistance is needed to diagnose and resolve this issue.Thank you.—> …Purchase or Repair: Ticket Image...
Show More
#Siemens by MUSOVSKI on 2024-06-14 07:44
The Siemens 6ES5 242-1AA32 experienced a malfunction today, causing downtime in the production unit. The issue occurred at 1130 AM and is critical for our operations. Any quick information on what went wrong would be greatly appreciated before the next shift. Thank you.

—> Purchase or Repair:
#Siemens by Kicthing on 2017-02-23 15:48
Hello, I am interested in purchasing the Siemens 6FC5112-0EA02-0AA0 System 840C Interface Board. Can you please let me know about the pricing and availability? I am looking to source this unit quickly. Thank you.

—> Purchase or Repair:
Seeking repair for Siemens Energy & Automation, Inc. 3-533-0907G video card. The unit is malfunctioning, and we require technical assistance to resolve the issue

—> Purchase or Repair:
#Siemens by moutal on 2022-11-27 14:43
Our Siemens 6SL33201TH410AA0 unit is still down. We need urgent assistance. Please respond

—> Purchase or Repair:
#Siemens by T.J. Toney on 2025-06-01 20:18
Siemens 6FC3241-0AA-Z, Sinumerik 810 T GA2 Controller experienced downtime today during the night shift at 200 AM. Need a quick answer before the next shift arrives.

—> Purchase or Repair:
#Siemens by Gino Venturelli on 2025-05-17 18:38
The Siemens 6DS1202-8AB Communication Interface Module on unit X went down mid-shift. Please investigate and troubleshoot it during the day shift. Thank you.

—> Purchase or Repair:
#Siemens by Magaly Polo A. on 2006-11-14 01:20
Dear Mr or Mrs Please quote the following: 1 SOURCE OF FEEDINGSITOP120/230 VAC EXIT 24 VDC 20 AMP BRAND SIEMENS MODEL 6EP1 336-3BA001 SOURCE OF FEEDINGSITOP120/230 VAC EXIT 24 VDC 10 AMP BRAND SIEMENS MODEL 6EP1 334-ISL111 SIMATIC S7-300, ET 200 SISTEMA PERIFERIA DECENTRALIZADA BRAND SIEMENS MODEL 6…Purchase or Repair: Ticket Image...
Show More
#Siemens by Aubrey Fleming on 2011-01-10 17:16
The circuit board of our Siemens 685139 E1721-A88 is malfunctioning, causing a significant disruption in our production line. This issue needs urgent attention and immediate repair to minimize downtime. Please prioritize this repair request to ensure swift resolution.

—> Purchase or Repair:
#Siemens by Larry Youhanaian on 2011-02-08 19:56
We experienced downtime due to a malfunction with Siemens 685139 E1721-A88 circuit board. It occurred at 645 am today. Please advise on troubleshooting steps. Thank you.

—> Purchase or Repair:
#Siemens by Shanahan on 2023-12-25 00:00
Hey, the SIEMENS SIMATIC PANEL 6AV6643-0BA01-1AX0 went down mid-shift. Tried troubleshooting, but issue remains unknown. Need a daytime follow-up to investigate further.

—> Purchase or Repair:
#Siemens by Rafael Hernández on 2014-12-20 00:44
Need assistance with Siemens Acramatic 2100 3-424-2130A01 monitor/controller repair. Unit fails to power on, display screen remains blank. Seeking immediate repair service. Thank you.

—> Purchase or Repair:
#Siemens by Batman on 2025-06-12 00:35
Do you have a Siemens 505-3732 24vdc output module available for sale or repair? We need it urgently to get production back up and running. Let me know ASAP.

—> Purchase or Repair:
#Siemens by Wayne Cleveland on 2014-12-23 12:06
The Siemens Acramatic 2100 3-424-2130A01 monitor/controller in the warehouse is exhibiting abnormal behavior. The unit is not functioning as usual and is acting erratically.

—> Purchase or Repair:
#Siemens by Domingo Galán on 2011-12-17 02:20
We need urgent attention regarding the Siemens 685139 E1721-A88 circuit board. The unit is still down. Please reply

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.