Anilam Service & Repair Forum
Can the Anilam Miniwizard controller be repaired or purchased? I'm trying to check this off my to-do list.
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "Anilam"
- Anilam → Anilam MINI WIZARD A163-20000 ↗
- Anilam → Anilam WIZARD 350 A1920001 ↗
- Anilam → touch pad membrane for Anilam Crusader M ↗
- Anilam → Anilam WIZARD 111 A1480111 ↗
- Anilam → Anilam crusader 2 l ↗
- Anilam → Anilam error code 18 ↗
- Anilam → Anilam Crusader II Model # A225-102113 ↗
- Anilam → Anilam 1100 control ↗
- Anilam → ANILAM CRUSADER-2 WIRING DIAGRAM ↗
- Anilam → i have also problem +x or -x limit ↗
- Anilam → anilam error code 18 ↗
- Anilam → cmos memory ↗
- Anilam → Anilam Cursador II ↗
- Anilam → Anilam Crusader II 3Axis Z axis problems ↗
- Anilam → Anilam : +X OR -X LIMIT ANILAM. ↗
- Anilam → Anilam anilam crusader m ↗
- Anilam → ANILAM CRUSADER-2 ↗
- Anilam → Anilam Anilam Crusader II wiring Diagram ↗
- Anilam → 1100 Software ↗
If you need your Anilam unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 397 Comments
Sir, We have purchased 1 used Ernault Samoua milling Machine model ZHV-1.travels of the machine x,y,z are 710*270*400. Machine has been retrofittedwith Anilam Microprocessor model CRUSADER-2.problem with the machine isthat when machine is switched on, the display on the monitor is showingERROR-18 an…Purchase or Repair: 
...
Show More
Show More
I'm experiencing some issues with the Anilam Wizard 350 Plus A1920001 digital display module. It seems like something has stopped working, but I'm not exactly sure what the problem is. I would appreciate your help in diagnosing and fixing the issue.
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an ANILAM 3000 TOUCH A7334029 in stock for sale? Our unit went down, and we need to get production up and running.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam mini wizard A163-20000 XY Axis Controller is showing Error Code 1012. The equipment is down, unable to move in X or Y direction. Please advise on troubleshooting steps or repairs needed. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
i have a milling machine with a anilam crusader when i start up the machine he gives a error 18 after 3 seconds and the x as moves 0.5 mm the machine have indramat servos please can you help me
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam A30250 control board is displaying Error Code 115. The machine is currently not responding to any inputs and is producing a continuous alarm sound. Immediate assistance is needed to resolve this issue and get the equipment back up and running.
—> Purchase or Repair:
—> Purchase or Repair:
The digital readout on the Anilam Wizzard A1662000000 is malfunctioning, which is affecting the production line. Immediate repair service is needed to resume operations swiftly.
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing some issues with the Anilam Miniwizard A163-2000 display unit. It seems like something may have stopped working correctly, but I'm unsure of the exact problem. Any assistance or guidance would be greatly appreciated.
—> Purchase or Repair:
—> Purchase or Repair:
Hey, the screen on Anilam Wizard 450L A245210 went blank. Looks like one of the drives or boards took a dive. Checking it out now.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 211 A221200 Display/Control Module is exhibiting unusual behavior. It's not functioning as expected, and its operations seem erratic.
—> Purchase or Repair:
—> Purchase or Repair:
We experienced downtime with the Anilam WIZARD 211 A221300 Digital Readout Module earlier today around 230 PM. Can you provide any insights on what might have caused the issue? Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizzard A1662000000 unit is down mid-shift. Requires attention before using during the day.
—> Purchase or Repair:
—> Purchase or Repair:
When I booted machine COMS battery state lowStandard COMS setupAdvance COMS setupauto configuration with BIOS defaultsauto configuration with power on defaultschange passwordauto detect hard diskauto detect hard disk utilitywrite to COMS and exitdonot write to COMS and exitI dont know where batterie…Purchase or Repair: 
...
Show More
Show More
I believe there may be an issue with the Anilam A1920001. It appears that something has stopped working on the controller. I suggest contacting a technician for a closer look to diagnose and resolve the problem effectively.
—> Purchase or Repair:
—> Purchase or Repair:
There seems to be an issue with the Anilam A1920001 unit. Maintenance team needs your assistance to troubleshoot it.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please provide repair information for Anilam Wizard 211 A221200 Digital Readout Module? Our unit has stopped working, and we urgently need a replacement. Thank you for your
—> Purchase or Repair:
—> Purchase or Repair:
It is critical that we address the issue with the Anilam Wizard 111 A1480111 Digital Readout. Please ensure
—> Purchase or Repair:
—> Purchase or Repair:
1100m on a bridgeport style knee mill,i was told the mother board is out. anyway to check it and how much would a replacement board cost.
—> Purchase or Repair:
—> Purchase or Repair:
The XY Axis Controller (Anilam mini wizard A163-20000) just failed on one of the machines. Need to get this fixed ASAP for smooth operation.
—> Purchase or Repair:
—> Purchase or Repair:
The ANILAM 3000 TOUCH A7334029 unit has malfunctioned mid-shift. Please investigate and address the issue
—> Purchase or Repair:
—> Purchase or Repair:
Please provide as much information as possible about the Anilam Wizard 450 A245200 screen unit. We will inquire about its support status and the availability of replacement parts.
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an Anilam Wizzard A1662000000 available for sale or repair to keep our production running?
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 211 A221200 display/control module went down mid-shift. Please check and troubleshoot in the morning. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 350 Plus A1920002 is not functioning properly. Maintenance team needs assistance.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 150 70000291 just went down, looks like a drive or board failure. Heading over to check it out now.
—> Purchase or Repair:
—> Purchase or Repair:
The unit ANILAM WIZARD 450 A245300 is labeled as an "ENCODER" but I'm not completely sure what its function is. It seems to be malfunctioning and requires maintenance.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 150 70000291 is displaying error code E2. The spindle motor is not running and the machine is unable to start up properly. Please advise on troubleshooting steps. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hi I has a problem with a Lagun CNC with control anilam cruzader II I would like to buy the manual first and then expaint to you whats is our problem
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Miniwizard A163-2000 display unit is not functioning. Maintenance team needs assistance.
—> Purchase or Repair:
—> Purchase or Repair:
Hi team, the Anilam Wizard 350 Plus A1920001 digital display module is down. Please investigate and troubleshoot during the day shift. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am reaching out on behalf of my client who has an Anilam mini wizard A163-20000 XY Axis Controller that requires repair. Could you please provide me with information on the services you offer for this specific part? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I need assistance with my Anilam WIZARD 211 A221300 Digital Readout Module. The unit is still down. Please follow up and provide a solution
—> Purchase or Repair:
—> Purchase or Repair:
The Z axis is inoperative, manual movement of the Z axis results in the power contactor tripping out. This is the same contactor that is controlled by the limit switches. When the machine is first powered up the Y,X servo motors are powered, the Z is not getting power.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam mini wizard A163-20000 controller for XY axis is malfunctioning, impacting production line. Urgent repair needed to resume operations immediately.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please confirm if Anilam A1920001 controllers are still supported or if replacement parts are available for this older unit? Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizzard A1662000000 is displaying error code E-345. Machine is not detecting tool changes and prevents operation. Need immediate assistance to troubleshoot and resolve the issue.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm interested in purchasing an Anilam 1100M A7010000 Motor Controller. I'm not entirely certain if this is the correct model, but my team suggested reaching out to inquire about pricing and availability. Could you please let me know if this unit is in stock and provide me with pricing detail…Purchase or Repair: 
...
Show More
Show More
Our Anilam Wizard A166-2000000 unit is still down. Please ensure someone gets back to us
—> Purchase or Repair:
—> Purchase or Repair:
I'm interested in purchasing an Anilam Wizard 450 A245200. Can you please provide information on pricing and availability? I'm looking to source one quickly. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
The display unit on the Anilam Electronics Corp. Wizaed 350+ A1920001 is malfunctioning, causing a halt in production. This issue needs urgent attention to get the line back up and running smoothly.
—> Purchase or Repair:
—> Purchase or Repair:
Please provide me with pricing and availability for the Anilam Wizard 450L A245210 screen. My team recommended that I inquire about this unit, and I am hoping to source one quickly. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing trouble with the Anilam Wizard 111 A1480111 digital readout. It seems like something has stopped working, but I'm not sure what exactly. Any assistance you can provide would be greatly appreciated.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I'm reaching out on behalf of a client who's experiencing issues with an Anilam Wizard A1662000000 digital readout. Could you please provide some information on possible repairs or troubleshooting steps for this particular model? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam Wizard 111 A1480111 Digital Readout be repaired or replaced? Trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: