Anilam Service & Repair Forum

We have an Anilam machine that is died.The screen show +x or -x limit. Can you help me?...Thanks..

—> Purchase or Repair: Ticket Image

— Posted by JOSE PRADA on 2008-11-26

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Anilam"

If you need your Anilam unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 397 Comments

#Anilam by Ward on 2014-12-23 22:06
Hi there, we need repair info for our Anilam Patriot A1480001 digital readout, can you provide assistance or recommend a repair shop? Thanks!

—> Purchase or Repair:
#Anilam by Scott Redfern on 2007-05-31 14:34
One of the PCB boards in the controller came off it\'s mountings during transport and was damaged. The servos do not power up and the release for Spindle operation is not enabled (even in Spindle manual). Do you need the electrical schematics that I have to make the repair?

—> Purchase or Repair:
#Anilam by Chookeat T. on 2013-05-30 22:02
Unit Anilam Wizzard A1662000000 caused downtime yesterday on the afternoon shift. The digital readout malfunctioned, leading to production delays. Please provide feedback on what caused the issue and when it can be resolved. Thank you.

—> Purchase or Repair:
#ANILAM by antillon on 2014-11-19 01:00
The ANILAM 3000 TOUCH A7334029 unit has malfunctioned mid-shift. Please investigate and address the issue

—> Purchase or Repair:
#ANILAM by João Lourenço on 2014-02-18 17:12
Do you have an ANILAM 3000 TOUCH A7334029 in stock for sale? Our unit went down, and we need to get production up and running.

—> Purchase or Repair:
#Anilam by muhammad amin on 2008-03-07 11:33
Dear SirHow we adjust the backlash in machinethanksAMIN

—> Purchase or Repair:
#Anilam by saavedra on 2015-11-25 12:15
I need immediate assistance with my Anilam WIZARD 211 A221300 Digital Readout Module. The unit is still down and requires attention. Please respond as soon as possible.

—> Purchase or Repair:
#Anilam by hr on 2012-03-08 13:32
Can the Anilam A1920001 controller be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Anilam by Valle on 2012-10-08 15:09
The Anilam A1920001 controller is displaying error code E102. Equipment has halted production. Please advise on next steps for diagnosis and repair.

—> Purchase or Repair:
#Anilam by horton on 2015-02-10 21:04
We experienced downtime with the Anilam WIZARD 211 A221300 Digital Readout Module earlier today around 230 PM. Can you provide any insights on what might have caused the issue? Thank you!

—> Purchase or Repair:
#ANILAM by Jeff DeWeerdt on 2014-02-17 19:12
ANILAM 3000 TOUCH A7334029 not functioning; seeking repair service.

—> Purchase or Repair:
#Anilam by Chinthaka Balasuriya on 2015-07-26 11:20
The Anilam WIZARD 211 A221300 Digital Readout Module malfunctioned at 1015 AM today, causing downtime. Please advise on next steps. Thank you.

—> Purchase or Repair:
#Anilam by Stoil Avuski on 2010-03-29 08:34
The digital readout on our Anilam Wizard 111 A1480111 is malfunctioning, impacting our production line. Urgent repair service is needed to resolve this issue

—> Purchase or Repair:
#Anilam Wizard by Chad Day on 2015-06-09 07:54
Anilam Wizard 111 A1480111 Description DRO unit experienced downtime from 800 PM to 1000 PM last night. Need details before next shift.

—> Purchase or Repair:
#Anilam Wizard by Russel Cooper on 2015-12-29 06:36
Anilam Wizard 450 A245200 issue Screen malfunction causing production downtime. Urgent repair needed to resume operations

—> Purchase or Repair:
#Anilam by Zaw on 2011-06-09 20:41
I am following up on our previous message regarding the Anilam Wizard 150 70000291. The unit is still down. Please provide a response

—> Purchase or Repair:
#Anilam by Nigel Poole on 2012-07-18 09:36
We experienced unexpected downtime due to a malfunction in the Anilam A1920001 controller. It occurred today during the morning shift. Can you provide further insight into the issue before the next shift arrives?

—> Purchase or Repair:
#Anilam by Emmanuel on 2010-02-13 01:07
The unit that controls the XY Axis on the Anilam mini wizard A163-20000 is behaving erratically - it is not functioning as it normally does.

—> Purchase or Repair:
#Anilam Wizard by Salata on 2015-10-03 08:04
The screen on the Anilam Wizard 450L A245210 unit is displaying erratic behavior such as flashing, flickering, or showing distorted images.

—> Purchase or Repair:
#Anilam by koekemoer on 2015-07-12 17:32
We experienced downtime due to issues with the Anilam Wizard 211 A221200 digital readout module during the previous shift. Need a quick answer before next shift.

—> Purchase or Repair:
#Anilam by Abdulkareem on 2014-12-05 01:23
The Anilam Wizard 350 Plus A1920001, a Digital Display Module, experienced downtime during our shift. We urgently need to investigate what went wrong and when it occurred to prevent further disruptions. Can you provide a quick update before the next shift starts?

—> Purchase or Repair:
#Anilam by K PRABHAKARA RAO on 2011-01-17 08:22
DEAR SIRORDNANCE FACTORY, MINISTRY OF DEFENCE, TIRUCHIRAPALLI- 620 016, (TAMILNADU STATE), SEARCHING FOR CNC SYSTEM AND DRIVE SERVICING AGENCY, WHO CAN REPAIR KIRLOSKAR CRUSADER MARK-II SYSTEM FITTED ON BFW VERTICAL MILLING MACHINE . KINDLY INTIMATE THE FEASIBILITY OF REAPAIRS OF THE SAME AT YOUR WO…Purchase or Repair: Ticket Image...
Show More
#Anilam Wizard by Janis on 2015-08-04 12:19
I'm having trouble with the Anilam Wizard 450L A245210. It seems to be an issue with the screen, but I'm not exactly sure. Any guidance or support would be greatly appreciated. Thank you.

—> Purchase or Repair:
#ANILAM by Grama on 2015-07-18 22:20
Hello, the ANILAM WIZARD 450 A245300 experienced downtime due to issues with the encoder yesterday evening around 830 PM. Can you provide some insight into what caused the problem? Your

—> Purchase or Repair:
#Anilam by Tong Sheng Holdings Limited on 2014-04-15 00:32
Can the Anilam 1100M A7010000 motor controller be repaired or replaced? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Anilam by Charles Furtado on 2014-12-03 18:23
The Anilam 1100M A7010000 is not functioning properly, and assistance from the maintenance team is needed.

—> Purchase or Repair:
#Anilam by curtis gast on 2014-12-12 05:16
The Anilam Wizard 211 A221200 display/control module went down mid-shift. Please check and troubleshoot in the morning. Thank you.

—> Purchase or Repair:
#Anilam by Dunst on 2015-08-09 22:20
Anilam Miniwizard A163-2000 is displaying error code E05 and is non-operational. Please advise on troubleshooting steps or potential solutions. Thank you.

—> Purchase or Repair:
#Anilam by giovani on 2011-03-22 21:00
The Anilam Wizard 150 with serial number 70000291 in the warehouse is not functioning as usual. It is displaying strange behavior, and you are uncertain what to make of it.

—> Purchase or Repair:
#Anilam by Richard S. Heckman Sr. on 2010-09-27 14:14
The Z axis is inoperative, manual movement of the Z axis results in the power contactor tripping out. This is the same contactor that is controlled by the limit switches. When the machine is first powered up the Y,X servo motors are powered, the Z is not getting power.

—> Purchase or Repair:
#Anilam by Unzeitig Lubomír on 2012-05-06 03:10
The Anilam A1920001 controller is malfunctioning, causing major disruptions to our production line. We need immediate assistance to resolve this issue and get operations running smoothly again. Please prioritize this repair request to minimize any further delays.

—> Purchase or Repair:
#Anilam by Said.Boudebah on 2014-08-26 10:43
The Anilam Wizard A166-2000000 digital readout unit went down mid-shift. Please follow up during the day. Thank you.

—> Purchase or Repair:
#Anilam Wizard by RAUL GUTIERREZ on 2015-01-06 16:41
Anilam Wizard 450 A245200 experienced downtime due to a screen issue. This occurred at resulting in production delays. Can you check on this before the next shift starts? Thank you.

—> Purchase or Repair:
#Anilam by JOLI on 2012-03-09 16:39
Need help with Anilam A1920001 controller not functioning properly, need professional repair. Please respond if experienced in repairing industrial units. Thank you.

—> Purchase or Repair:
#Anilam Wizard by lin wen bin on 2015-02-07 11:52
Hello, the Anilam Wizard 111 A1480111 experienced an issue causing downtime. The incident occurred at 345 PM when the unit stopped functioning properly, leading to a halt in production. Need clarification on the problem. Thank you.

—> Purchase or Repair:
#Anilam by waelshalabey on 2010-04-15 21:57
Hi, I need assistance with my Anilam Wizard 350 A1920001, Mini Wizard. There was a unit malfunction that caused significant downtime. Can you provide a brief explanation of what happened and when it occurred? Your

—> Purchase or Repair:
#Anilam Electronics Corp. by tahir on 2014-12-04 13:23
Hi there, I hope this message finds you well. I'm interested in purchasing the Anilam Electronics Corp. Series 1100 31900394 control unit. Could you please provide information regarding pricing and availability? I'm looking to source one quickly. Thank you in advance for your assistance. —> …Purchase or Repair: Ticket Image...
Show More
#Anilam by Colby on 2012-05-29 14:18
The Anilam A1920001 controller in the shop is not working.

—> Purchase or Repair:
#Anilam by TONY KIM on 2015-08-13 04:20
I need assistance with my Anilam WIZARD 211 A221300 Digital Readout Module. The unit is still down. Please follow up and provide a solution

—> Purchase or Repair:
#Anilam by aminjabbari on 2010-04-19 03:05
Hi there, can you please provide repair information for Anilam Mini Wizard A163-20000 XY Axis Controller? Thanks!

—> Purchase or Repair:
#Anilam Wizard by Su on 2015-07-20 16:20
Could you please assist in verifying if the Anilam Wizard 450L A245210 is still supported for repairs or if replacement parts are available? Thank you.

—> Purchase or Repair:
#Anilam by RANJIT SINGH on 2010-09-20 16:16
WE NEED ELECTRICAL CIRCUIT DIAGRAM+REPAIRING MANUAL FOR ANILAM CRUSADER-2(3-AXIS).WHAT WILL BE THE CHARGES FOR THE SAME.

—> Purchase or Repair:
#Anilam by khadar on 2015-07-09 07:14
I'm experiencing some issues with the Anilam Miniwizard A163-2000 display unit. It seems like something may have stopped working correctly, but I'm unsure of the exact problem. Any assistance or guidance would be greatly appreciated.

—> Purchase or Repair:
#Anilam by jamal zamani on 2014-12-26 00:27
The Anilam Wizard 350 Plus A1920001 Digital Display Module is displaying erratic behavior, showing unusual outputs, and not functioning as expected.

—> Purchase or Repair:
I am reaching out on behalf of my client regarding Anilam Electronics Corp. Wizaed 350+ part number A1920001. The issue seems to be related to the Display Unit. Can you please provide more information on the repair process and cost estimation? Thank you.

—> Purchase or Repair:
#Anilam Wizard by Joe Birdo on 2014-12-16 08:44
Anilam Wizard 350 Plus A1920002 not powering on.

—> Purchase or Repair:
#ANILAM by Ciaran McGuinness on 2015-03-13 20:40
The ANILAM WIZARD 450 A245300 is displaying error code E29, indicating an issue with the encoder. The equipment is currently down, and we need your assistance to diagnose and resolve this problem

—> Purchase or Repair:
#Anilam by CHAURASIA on 2013-02-10 15:39
Hello, I need repair information for an Anilam Wizzard A1662000000 digital readout. Can you provide details or recommend a repair shop? Thanks!

—> Purchase or Repair:
#Anilam by Tungesvick on 2012-01-18 15:39
Can you please confirm if the Anilam A1920001 controller is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:
#Anilam by George Comrie on 2013-07-10 04:32
Can the Anilam Wizzard A1662000000 digital readout be repaired or replaced? I'm looking to check this off my to-do list.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.