Troubleshooting NSK: Common problems and repair info

NSK for Service call 1-336-969-0110 at Industrial Electronics Repair

NSK Service & Repair Forum

Dear sirPlz send pdf ofesa-b045af3-21RegardsS.Amal Raj

—> Purchase or Repair:

— Posted by Amal Raj on 2009-04-27

Reply🗨️Ask a New Question Below❓

Recent 96 Comments

#NSK by Moises Tovar on 2008-07-09 14:51

I need a NSK driver part no. EE0608A05-25 SERIE. 065221

—> Purchase or Repair:

➡️ Reply

#NSK by Kohlbrenner Chris on 2008-02-11 08:31

Hello, we have a Problem with an NSK \"ESA Y2020 TF6-20\", No: 2-05407-700. It shows \"F 4\" on the Display and we don\'t know, what that means. Please send us an Answer as soon as possible.Please send us also a list of every possible Alarm, which could be shown on the Display.The Adress is above, p…Purchase or Repair:

➡️ Reply

#NSK by Virgil on 2014-12-28 10:06

NSK ESA 4-65006-700 drive just failed, need urgent attention. Moving to next machine now to continue rounds.

—> Purchase or Repair:

➡️ Reply

#NSK by Leo Solomon on 2016-11-15 09:13

Gud DayThe NSK ESA-Y2003A23-21 driver that we have is having a big trouble on its communication , it wont make the motor to initialize, it only goes on one side of initialization and does not goes to its original position, but when we try to manually rotate it using handy controller configuration, i…Purchase or Repair:

➡️ Reply

#NSK by Mrs Mohan on 2007-05-24 13:41

The above mentioned drive needs repair.

—> Purchase or Repair:

➡️ Reply

#NSK by Volker Schmidt on 2009-01-07 10:26

We hava some drivers with the PN ESA-BO14CFD-21 or ESA-BO14CF3-11I can communicate over hyper terminal but not all command work, TS, TC, IO0/RB but some commands do not work like TT, MN.Do you have any idear?Thanks for help Volker

—> Purchase or Repair:

➡️ Reply

#NSK by Amal Raj on 2009-04-27 16:31

Dear sirPlz send pdf ofesa-b045af3-21RegardsS.Amal Raj

—> Purchase or Repair:

➡️ Reply

#NSK by azadeh on 2014-05-01 22:20

Hello, our NSK ESA 4-65006-700 drive is down with error code E302. Urgent assistance needed to troubleshoot and resolve the issue. Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Sergio Rodriguez on 2012-06-14 22:38

NSK Servo Drive Repair Model: EM1010A15-05 We have a NSK Servo Drive in bad conditions, when we turn on the machine light leds.I appreciate your comments, in case that you can to repair my servo drive.Best Regards Sergio Rodriguez Plant chiefProduction DepartmentAv. Los pinos #7 A Col. Los pinosGuad…Purchase or Repair:

➡️ Reply

#NSK by DAVID CONTRERAS on 2014-12-06 06:23

The NSK ESA 4-34018-700 drive unit isn't working.

—> Purchase or Repair:

➡️ Reply

#NSK by brecea on 2014-02-10 21:04

Could you please provide repair information for NSK ESA 4-34018-700 Drive? It's urgent, and we're on-site trying to get it fixed quickly. Thank you!

—> Purchase or Repair:

➡️ Reply

#NSK by Andy on 2012-11-29 23:44

We are working on our study thesis and our problem is we can\'t get a real communication with RS-232 on CN1- Handy Terminal just blinking line and also with Hyperterminal no answere. There\'s no C2 warning on the Display. Any ideas what could be the problem of the drive and how we could possible sol…Purchase or Repair:

➡️ Reply

#NSK by mdali on 2014-12-25 07:44

Hello, I am inquiring about part number NSK ESA 4-34018-700 described as a drive. My client is experiencing an issue with it. Can you please provide information on how we can proceed with repair or troubleshooting? Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Maher Amara on 2011-11-16 11:48

If it\'s possible to repqir the SERVO DRIVE NSK type EMOAOBK13-05SPR-T4/Z-NS

—> Purchase or Repair:

➡️ Reply

#NSK by Elkowich on 2014-02-13 04:58

The NSK ESA 4-65006-700 Drive unit is currently not functioning. Please investigate and provide a status update. Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Jesus Escobedo on 2009-10-02 17:52

We have a NSK Servo Drive in bad conditions, when we turn on the machine, never lit the green and red leds.I appreciate your comments, in case that you can to repair my servo drive.Cordially,Jesús EscobedoCNC Maintenance EngineerManufacturing Engineering DepartmentCalle 5 # 899, Zona IndustrialGuada…Purchase or Repair:

➡️ Reply

#NSK by Mark Proctor on 2007-04-03 10:08

NSK ES3040K23-03 Servo DriveHi, We have an NSK ES3040K23-03 servo drive that requires repair.Do you have a fixed price repair on this unit?Please advise as soon as possible.ThanksMark Proctor

—> Purchase or Repair:

➡️ Reply

#NSK by BIOTECH on 2014-12-03 23:23

Can this NSK ESA 4-65006-700 Drive be repaired or bought? I am looking to check this off my to-do list.

—> Purchase or Repair:

➡️ Reply

#NSK by Mfg on 2014-12-26 03:06

Could you please confirm if the NSK ESA 4-34018-700 is still supported or if replacement parts are available for this drive unit? Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by mansuk hong on 2008-04-09 05:20

I\'d like to get a manual for nsk that is ESB014CFI-01A.I\'VE GOT A PROBLEM THAT IS E0-A ON THE DISPLAY I\'M NOT SURE WHAT DOES IT MEAN?COULD YOU TELL ME ABOUT THAT PROBLEM.

—> Purchase or Repair:

➡️ Reply

#NSK by Scott Boynton on 2008-04-14 22:16

Hello, I have a NSK ESA Y2020 drive that appears a blown optoisolator on the quadrature encoder output. The A, B, B*, Z and Z* channels work normaly, with a zero to five volt throw, but the A* channel only has about a half volt thow. Of course this is preventing it from working properly. Can you off…Purchase or Repair:

➡️ Reply

#NSK by Hans van der Hoorn on 2025-06-01 18:27

The NSK EM1010A15-05 drive unit is not working. Please check and repair.

—> Purchase or Repair:

➡️ Reply

#NSK by Thoma on 2014-02-17 07:58

Hello, I'm interested in the NSK ESA 4-65006-700 drive. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you!

—> Purchase or Repair:

➡️ Reply

#NSK by Al Urbonas on 2025-05-22 08:40

The NSK ESB014CF1-01A is not functioning properly. Please check and repair as needed. Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Alex Cheong on 2012-02-17 04:24

Dear Sir,We are trading company located in Malaysia looking for the possibility to repairing several type of OEM NSK DD motor and Driver as below,DD Motor type,1) M-JSB015FA503DD motor Drivers,2) M-ESA-D017-CF13) ESA-JB015CF3-204) M-EDC-PS3015CB5F5-01Kindly advise the possibility, prices, lead time,…Purchase or Repair:

➡️ Reply

#NSK by MARTIN Michel on 2007-04-17 16:22

Hello ,we need repair some parts NSK servodrive or servo motor .have you an office or desk manager in france ?best regards Mr MARTIN Michel

—> Purchase or Repair:

➡️ Reply

#NSK by TOMAS MARIN on 2010-07-02 23:25

I GOT A PROBLEM BUT I DONT KNOW WHERE COULD BE IF IN MOTOR OR IN DRIVE MY DRIVE IS AN NSK ESA Y3040TF120 AND THE MOTOR THE FAULT ON THE DRIVE IS F-1 AND A- 4 AND THE MAIN PROBLEM IS ON THE TOURRET INDEXING SO I CAN NOT SEE ON DYSPLAY THE NUMBER OF THE TOOL

—> Purchase or Repair:

➡️ Reply

#NSK by Vishnumurthy on 2010-04-16 14:46

Please send me the PDF for type ESA-B045AF3-21 number B-2X011-700.And also provide the service center name/ details in Bengaluru, Karnataka, India.RegardsVishnumurthy

—> Purchase or Repair:

➡️ Reply

#NSK by Behr on 2014-02-16 17:58

The NSK ESA 4-65006-700 unit is not functioning. It is a drive unit.

—> Purchase or Repair:

➡️ Reply

#NSK by yasser on 2009-12-05 13:34

good evening .i hope all stuff ok. plz i have proplem, in my netestal machine about robot moving hand .this problem come from servo drive give me error f4 and i read in book its friom emergency switch but i check all emergency ok. i try another drive it work and give letter C but problem difference …Purchase or Repair:

➡️ Reply

#NSK by Khoa on 2014-01-07 06:22

The NSK ESA 4-34018-700 is a drive unit that is currently not working. The maintenance team needs assistance in resolving the issue.

—> Purchase or Repair:

➡️ Reply

#NSK by Olaf Rekman on 2011-05-19 14:41

Dear Sir,I am looking for a programming terminal for NSK driver type EMBO14AF2 Looking forward to hear from You,Best regardsOlaf RekmanStokkanhaugen 1167048 Trondheim – NorwayPhone +47 90963306olafrekman@gmail.com

—> Purchase or Repair:

➡️ Reply

#NSK by Peter Hamvai on 2009-05-11 13:34

Dear repair center,I\'m searching for a used(repaired) NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!If you haven\'t from this modul, please let me know around what is the repairing time with delivery if the wrong one is on Hungary now?!kind regardsPeter Hamvai—> …Purchase or Repair:

➡️ Reply

#NSK by Eric Ronnebaum on 2015-10-28 15:15

Dear sales I need a repair on a nsk RW1410FN523 motor. My customer is stating it making loader then normal noises and it harder to rotated by hand. The NSK amplifier is M-EP1410A15-05We would like to have a estimate if possible to go through it. I don\'t know if this is possible without looking at t…Purchase or Repair:

➡️ Reply

#NSK by Cheol Min Part on 2009-06-25 14:17

Dear Sir.I wonder whether you can fix this driver or not.(M-ELC-JG014VF1)If you can, let me know estimates and delivery time.If you need picture, I\'ll send you some pictures.Thanks.

—> Purchase or Repair:

➡️ Reply

#NSK by Andy on 2007-10-08 13:13

I from Russia.We do not have service NSK.I have read through the message I wish to ask. Service a manual is necessary to me.At me has deteriorated ESK-Y4080FT1-20 the driver.The ballast resistor 200 Ohms and the field transistor 2SK2662 burns down.I want the scheme or consultation.—> …Purchase or Repair:

➡️ Reply

#NSK by Dave Allen on 2009-01-19 14:09

We have a problem with ALL of our Tacumi toolchanger magazine carousels, when the magazine 1st homes the position is ALWAYS different.This is the SAME problem on EVERY machine.They all use the same NSK drive and motor.Drive type: ESA-Y3040T25-21 Motor type: YS3040FN501, No. 3Y31019Can you offer ANY …Purchase or Repair:

➡️ Reply

#NSK by Alexander Zitnicky on 2014-12-19 22:44

The NSK ESA 4-65006-700 drive unit malfunctioned earlier today during the morning shift, leading to unexpected downtime. Can you provide a quick update on the issue before the next shift begins? Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by BesterPreisvergleich on 2011-12-04 10:31

Hallo, ich habe eine tolle Seite entdeckt,bei der man einfach den billigsten Preis für allerlei Dinge suchen kann. Hier ist der link Bester Preisvergleich Ach ja, ausserdem findet man dort jede Menge Gutscheine, was natürlich toll ist!.

—> Purchase or Repair:

➡️ Reply

#NSK by Francesco Baldassa on 2010-09-17 09:10

Hello ,we need repair some parts NSK servodrive have you an office or desk manager in italy ?best regards Mr Francesco Baldassa

—> Purchase or Repair:

➡️ Reply

#NSK by elyamini on 2014-12-22 20:44

Hello, I am interested in purchasing the NSK ESA 4-65006-700 Drive unit. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:

➡️ Reply

#NSK by Animesh on 2008-09-25 15:52

I have got a problem that the servo motor is getting fault.How could I repair when I get P1,P2 such kind of warning.

—> Purchase or Repair:

➡️ Reply

#NSK by Mcguinness on 2014-12-23 15:06

Please provide me with detailed information about the NSK ESA 4-34018-700 Drive. We are looking into the possibility of finding replacement parts or repair options for this unit. Could you please confirm if it is still supported or if any parts are available for it? Thank you. —> …Purchase or Repair:

➡️ Reply

#NSK by Jim Bianchi on 2014-12-29 13:54

I am following up on the previous message regarding the NSK ESA 4-65006-700 Drive unit. The unit is still down. Please ensure someone gets back to me

—> Purchase or Repair:

➡️ Reply

#NSK by Anand on 2009-06-27 11:07

Dear repair center,We need to repairing NSK ESA-Y2020-TFI-II servo controller unit!Please quote me if you have!Warm regardsAnand

—> Purchase or Repair:

➡️ Reply

#NSK by Jesus Escobedo on 2009-10-02 17:48

➡️ Reply

#NSK by Olaf Rekman on 2010-03-24 16:51

Dear sir,I am looking for a new or rebuilded NSK driver TYPE EMB014AF-2-05Please let me know.Regards - Olaf

—> Purchase or Repair:

➡️ Reply

#NSK by Tom on 2007-03-03 02:20

Can you repair a ESLZ10CF1-01 drive and what is the turn around time? We have been sending these to another repair facility but we get about 20% of them back saying unable to repair. Can you help us ?ThanksTom

—> Purchase or Repair:

➡️ Reply

#NSK by HEDI on 2011-11-09 08:40

Hello,We need a servo drive NSK Ref: EM040BK13-05/NSK Machine NETSTAL injection (injection of CD-R), No. :04-2323-65.Thank you for sending me your best price offer

—> Purchase or Repair:

➡️ Reply

#NSK by Gilberto Saraiva on 2008-03-14 00:18

Good Morning:I need the manual of servo drive EM0608A05-05 NSK. Could you help-me please?.Thanks a lot

—> Purchase or Repair:

➡️ Reply

NSK Service & Repair Forum

Reply🗨️Ask a New Question Below❓

Recent 96 Comments

Contact Us

🚑Shop Location🛠️

📞Phone

📦Mailing Address🚛