Anilam Service & Repair Forum
The Z axis is inoperative, manual movement of the Z axis results in the power contactor tripping out. This is the same contactor that is controlled by the limit switches. When the machine is first powered up the Y,X servo motors are powered, the Z is not getting power.
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "Anilam"
- Anilam → Anilam WIZARD 350 A1920001 ↗
- Anilam → Anilam MINI WIZARD A163-20000 ↗
- Anilam → Anilam WIZARD 111 A1480111 ↗
- Anilam → ANILAM CRUSADER-2 ↗
- Anilam → Anilam Crusader II Model # A225-102113 ↗
- Anilam → 1100 Software ↗
- Anilam → Anilam crusader 2 l ↗
- Anilam → anilam error code 18 ↗
- Anilam → Anilam Cursador II ↗
- Anilam → Anilam Crusader II 3Axis Z axis problems ↗
- Anilam → i have also problem +x or -x limit ↗
- Anilam → Anilam error code 18 ↗
- Anilam → Anilam : +X OR -X LIMIT ANILAM. ↗
- Anilam → ANILAM CRUSADER-2 WIRING DIAGRAM ↗
- Anilam → touch pad membrane for Anilam Crusader M ↗
- Anilam → Anilam 1100 control ↗
- Anilam → Anilam Anilam Crusader II wiring Diagram ↗
- Anilam → Anilam anilam crusader m ↗
- Anilam → cmos memory ↗
If you need your Anilam unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 397 Comments
The Anilam mini wizard A163-20000 XY Axis Controller is showing Error Code 1012. The equipment is down, unable to move in X or Y direction. Please advise on troubleshooting steps or repairs needed. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The ANILAM WIZARD 450 A245300 unit labeled as ENCODER is not functioning properly.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam A1920001 unit is still down. I need a response this time. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with my Anilam Wizard 150 70000291 industrial unit, looking for repair service. Unit is not initializing properly, displaying error codes consistently. Need urgent assistance to get it up and running again.
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an Anilam WIZARD 211 A221300 Digital Readout Module available for sale or repair? Our production is currently affected, and we are hoping to resolve this issue
—> Purchase or Repair:
—> Purchase or Repair:
Could you please confirm if Anilam A1920001 controllers are still supported or if replacement parts are available for this older unit? Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizzard A1662000000 is displaying error code 123. The digital readout is frozen, and the controls are unresponsive. Need immediate assistance to troubleshoot and resolve this issue.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizard 350 Plus A1920001 unit down mid-shift. Display module issue. Needs attention ASAP.
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with my Anilam Wizard 111 A1480111 DRO unit. Need a technician to diagnose and repair
—> Purchase or Repair:
—> Purchase or Repair:
Hello, the Anilam Wizard 111 A1480111 experienced an issue causing downtime. The incident occurred at 345 PM when the unit stopped functioning properly, leading to a halt in production. Need clarification on the problem. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
1100m on a bridgeport style knee mill,i was told the mother board is out. anyway to check it and how much would a replacement board cost.
—> Purchase or Repair:
—> Purchase or Repair:
I'm having trouble with the Anilam Miniwizard A163-2000 display unit. It seems like something is not working properly, but I'm not entirely sure what the issue is. Any advice or assistance would be greatly appreciated.
—> Purchase or Repair:
—> Purchase or Repair:
Hi team, the Anilam Wizard 350 Plus A1920001 digital display module is down. Please investigate and troubleshoot during the day shift. Thanks!
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 350 Plus A1920002 is not functioning properly. Maintenance team needs assistance.
—> Purchase or Repair:
—> Purchase or Repair:
DEAR SIRORDNANCE FACTORY, MINISTRY OF DEFENCE, TIRUCHIRAPALLI- 620 016, (TAMILNADU STATE), SEARCHING FOR CNC SYSTEM AND DRIVE SERVICING AGENCY, WHO CAN REPAIR KIRLOSKAR CRUSADER MARK-II SYSTEM FITTED ON BFW VERTICAL MILLING MACHINE . KINDLY INTIMATE THE FEASIBILITY OF REAPAIRS OF THE SAME AT YOUR WO…Purchase or Repair: 
...
Show More
Show More
The Anilam mini wizard A163-20000 XY Axis Controller is showing Error Code 5 on startup. The machine is not responding to any input commands. Please advise on troubleshooting steps ASAP.
—> Purchase or Repair:
—> Purchase or Repair:
the ANILAM WIZARD 450 A245300 is down. Issue seems to be with the encoder. Please check it out first thing in the morning. Thanks.
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing an issue with the Anilam Wizard 211 A221200, which is a Digital Readout Module. I'm not entirely sure what the problem is, but something seems to have stopped working. I'll try my best to troubleshoot it and find a solution for you.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 450L A245210 unit is not working. Maintenance team needs assistance with the screen.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard A166-2000000 Digital Readout is malfunctioning, causing a significant slowdown in our production line. Urgently need a repair service to resolve this issue and get production back on track.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 111 A1480111 DRO unit has malfunctioned during the night shift. Please investigate and repair it as soon as possible during the day shift.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam Wizzard A1662000000 digital readout be repaired or replaced? I'm looking to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
Sir, We have purchased 1 used Ernault Samoua milling Machine model ZHV-1.travels of the machine x,y,z are 710*270*400. Machine has been retrofittedwith Anilam Microprocessor model CRUSADER-2.problem with the machine isthat when machine is switched on, the display on the monitor is showingERROR-18 an…Purchase or Repair: 
...
Show More
Show More
Hi john I called you earlier about connectors for servo driver card. We had cmos setting problems and fixed them on the 1100 by replacing the cpu board bios chip which contains internal batteries. We can walk you throughit if you need help. Interesting how your post about this problem poppedup in fr…Purchase or Repair: 
...
Show More
Show More
The Anilam Electronics Corp. Wizard 350+ A1920001 display unit is not working.
—> Purchase or Repair:
—> Purchase or Repair:
Drive or board failure on Anilam A1920001 controller while on rounds, need immediate attention to resolve the issue and minimize downtime.
—> Purchase or Repair:
—> Purchase or Repair:
Anilam Wizard 350 A1910001 not displaying any data or readings on the screen.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Electronics Mini Wizard A163-20000 unit is not functioning properly and needs attention from the maintenance team.
—> Purchase or Repair:
—> Purchase or Repair:
Hi I has a problem with a Lagun CNC with control anilam cruzader II I would like to buy the manual first and then expaint to you whats is our problem
—> Purchase or Repair:
—> Purchase or Repair:
Can you please confirm if the Anilam Wizard 450L A245210 screen can be repaired or needs to be bought? I'm trying to check this off my to-do list. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Please provide an update on the status of the ANILAM 3000 TOUCH A7334029 unit. It is urgent that we get a response this time. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The digital readout on our Anilam Wizzard A1662000000 is malfunctioning, causing a significant production slowdown. Please prioritize this repair to minimize the impact on our line.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam Wizard 211 A221200 Digital Readout Module be repaired or bought? I'm trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Miniwizard A163-2000 display unit is exhibiting unusual behavior in the warehouse. It might be indicating incorrect readings, showing distorted graphics, freezing intermittently, or failing to respond to inputs. A detailed inspection by a technician is recommended to diagnose and resolve …Purchase or Repair: 
...
Show More
Show More
We experienced unexpected downtime due to a malfunction with the Anilam WIZARD 211 A221300 Digital Readout Module. It occurred during today's shift. Can you provide guidance on how to address this issue before the next shift begins?
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizzard A1662000000 unit is not functioning. The maintenance team needs assistance with it.
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam WIZARD 211 A221300 is not functioning properly. Please look into it.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam 1100M A7010000 motor controller be repaired or replaced? I'm trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
My client's Anilam Patriot A1480001 digital readout seems to have a problem. Could you provide some information on potential repairs or troubleshooting steps for this specific model? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Hello, I am reaching out on behalf of my client who has an Anilam mini wizard A163-20000 XY Axis Controller that requires repair. Could you please provide me with information on the services you offer for this specific part? Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam Electronics Corp. Series 1100 31900394 Control Unit be repaired or replaced? I'm looking to address this from my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Anilam Wizard 450L A245210 screen be repaired or replaced? I'm trying to get this off my to-do list. Thank you!
—> Purchase or Repair:
—> Purchase or Repair:
The Anilam Wizard 150 70000291 experienced downtime today at 130 PM due to an unspecified issue. Can you provide some insight into what might have caused this problem? I appreciate your
—> Purchase or Repair:
—> Purchase or Repair:
Do you have an Anilam A1920001 controller available for sale or repair? Our unit went down and we need to keep production running.
—> Purchase or Repair:
—> Purchase or Repair:
—> Purchase or Repair: