John Deere Service & Repair Forum

John Deere RE66821 7AT6JD01 Analog Tachometer drive or board just failed. Needs replacement ASAP.

—> Purchase or Repair: Ticket Image

— Posted by vbaskar on 2011-06-13

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "John Deere"

If you need your John Deere unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 331 Comments

#John Deere by RJ GARCIA on 2014-02-15 23:58
Hi there, we have a John Deere RE43902 7MRT2JD02 controller that stopped working and we need a replacement. Could you please provide us with the repair information for this part? We need a quick solution. Thank you!

—> Purchase or Repair:
#John Deere by Basson on 2013-03-20 09:49
The Bale Trak Plus RE159944 is displaying error code E01.

—> Purchase or Repair:
#John Deere by Sehm on 2015-07-15 04:20
Hi there, the John Deere RE66265 Digital Tachometer is displaying error code E4. Equipment is not registering engine RPMs accurately. Kindly advise on troubleshooting steps needed for proper diagnosis and repair. Thank you.

—> Purchase or Repair:
#John Deere by varghese on 2014-09-04 10:02
The John Deere RE64583 7SUD5JD04 motor control unit is not working.

—> Purchase or Repair:
#John Deere by Mauro De Simone on 2014-04-04 22:29
The John Deere RE64583 7SUD3JD01 SCV Setup panel is not working in the shop.

—> Purchase or Repair:
#John Deere by Mcguinness on 2015-07-20 01:20
Can the John Deere RE64583 7SUD5JD04 SCV Setup Panel be repaired or bought to solve the issue you're having? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:
#John Deere by REALI on 2015-08-06 21:20
The John Deere RE64583 7SUD3JD01 SCV Setup Panel is displaying abnormal behavior in the warehouse.

—> Purchase or Repair:
#John Deere by george graw on 2015-04-27 19:58
Do you have a John Deere RE49192 7THM2JD03 tachometer available for sale or repair? Our unit stopped functioning, and we need to keep production running smoothly.

—> Purchase or Repair:
#John Deere by Ivan Alarcon on 2014-12-25 05:06
It seems like there may be an issue with the motor control on your John Deere RE64583. Something seems to have stopped working properly, but I'll do my best to help you figure out what's going on. Let's work together to troubleshoot and get your machine back in good working order. —> …Purchase or Repair: Ticket Image...
Show More
#John Deere by DAVID LEHMANN /ZIONS on 2013-12-27 17:43
Please provide an update on the John Deere RE64583 7SUD5JD04 SCV setup panel issue. The unit is still down. We need immediate attention on this matter.

—> Purchase or Repair:
#John Deere by Gastón Godoy L. on 2013-08-22 14:32
The John Deere Bale Trak Plus RE159944 unit in the warehouse is displaying unusual behavior.

—> Purchase or Repair:
#John Deere by Chidester on 2015-08-08 01:20
The John Deere RE49192 7THM2JD03 Tachometer is not functioning as expected.

—> Purchase or Repair:
#John Deere by adesh on 2013-06-12 23:59
The SCV Setup panel on the John Deere RE64583 7SUD5JD04 is malfunctioning, impacting the production line. Urgent repair service is needed to resolve this issue

—> Purchase or Repair:
#John Deere by Hohmann on 2013-07-27 21:32
I need assistance with the John Deere RE64583 7SUD5JD04 SCV Setup panel unit. It's not functioning properly.

—> Purchase or Repair:
#John Deere by Leslie on 2013-11-30 12:36
Hello, following up on my previous message regarding the John Deere RE64583 unit. It's still down. I urgently need assistance to resolve the issue. Please respond

—> Purchase or Repair:
#John Deere by tuan truong on 2015-01-12 12:41
The CAN Monitor Unit on the John Deere AT320355 AT320694 is malfunctioning, causing a disruption in the production line. Immediate attention is needed to resolve this issue efficiently and resume operations swiftly.

—> Purchase or Repair:
#John Deere by LEE SANG HUN on 2015-07-29 15:20
It seems like the Tach Display on your John Deere RE46704 7AT2JD01 may have an issue since it doesn't come on when cold. It would be best to consult a technician to diagnose the problem accurately.

—> Purchase or Repair:
#John Deere by Mark W Griffin on 2013-02-19 03:27
Do you have a replacement John Deere RE64583 SCV Setup panel available for purchase or repair? Production has been interrupted, and we need to keep things running smoothly.

—> Purchase or Repair:
#John Deere by Baleras on 2015-07-07 15:32
Can the SCV Setup Panel for the John Deere RE65483 7SUD5JD04 be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#John Deere by David Wilhelm on 2026-02-05 06:57
Request Service for John DeereModel/Part : Re208064 DisplayCrossed the battery leads which burned the fusable link. After that event the gauges work, but are not accurate or repeatable.

—> Purchase or Repair:
#John Deere by Kohlbrenner Chris on 2013-08-11 11:35
I noticed the John Deere RE64583 7SUD5JD04 SCV Setup panel is displaying unusual behavior. It's not functioning as expected and seems to be acting erratically.

—> Purchase or Repair:
#John Deere by Parand on 2015-06-22 18:12
Hello, I am reaching out on behalf of my client who has a John Deere RE66265 Digital Tachometer with the following issue 7MRT8JDO1E. Can you please provide more information or assistance with this part? Thank you.

—> Purchase or Repair:
#John Deere by Brenda Forrester on 2010-10-20 04:24
I've noticed that the digital display on the John Deere Motorola RE64583 seems to have stopped working. The machine is experiencing some issues, and I'm not exactly sure what it does, but I wanted to bring it to your attention. Thank you for looking into this matter.

—> Purchase or Repair:
#John Deere by audrey on 2014-12-28 13:06
John Deere RE43902 7MRT2JD02 controller not powering on.

—> Purchase or Repair:
#John Deere by Andy Vigar on 2025-05-29 15:12
Hello, I wanted to inform you that the John Deere SE502802 controller unit malfunctioned today during the morning shift, resulting in unplanned downtime. Can you please provide me with an update on the issue before the next shift begins? Thank you.

—> Purchase or Repair:
#John Deere by Yoram Friedman on 2010-11-18 00:17
John Deere Motorola RE64583 unit down - digital display issue. Needs attention ASAP. Night shift maintenance crew.

—> Purchase or Repair:
#John Deere by Gary Wolfe on 2015-08-15 01:20
Hey there, could you please provide repair info for a John Deere RE64583 7SUD3JD01 SCV Setup Panel that stopped working? We need the replacement part urgently. Thank you!

—> Purchase or Repair:
#John Deere by Cesar Mendez on 2016-06-01 17:22
The John Deere RE66221 7EHH6JD01 electronic hitch is showing error code E306. Equipment not lifting as programmed. Need immediate assistance troubleshooting and resolving the issue to minimize downtime.

—> Purchase or Repair:
#John Deere by Neill on 2013-08-03 03:32
The John Deere RE64583 7SUD5JD04 SCV setup panel seems to be experiencing unusual behavior in the warehouse. It is not functioning as it normally does, displaying strange actions that are out of the ordinary.

—> Purchase or Repair:
#John Deere by LEPOINT on 2013-03-16 14:15
I have a John Deere Bale Trak Plus RE159944 that is not displaying any information on the monitor. Looking for a repair specialist who can troubleshoot and fix the issue

—> Purchase or Repair:
#John Deere by radu on 2014-02-15 13:58
The John Deere RE64583 7SUD5JD04 is down due to a MOTOR CONTROL issue. Please follow up during the day. Thank you.

—> Purchase or Repair:
#John Deere by OliverAtmob on 2017-06-24 00:00
John Deere ECU 70842 displaying error code A-0530G12, unable to power on or communicate with equipment properly. Need repairs on the controller unit urgently.

—> Purchase or Repair:
#John Deere by Michael Read on 2011-02-13 01:59
The John Deere RE66821 7AT6JD01 analog tachometer unit is not working. Please check and repair during the day shift.

—> Purchase or Repair:
#John Deere by Jonathan Collie on 2013-08-07 02:32
Hey, the John Deere Bale Trak Plus RE159944 monitor unit went down mid-shift. Needs attention before next use. Please check and fix asap. Thanks!

—> Purchase or Repair:
#John Deere by orhan on 2015-07-14 04:20
Hello, I need assistance with John Deere parts AT320355 and AT320694, which are CAN Monitor Units. Can you provide information on troubleshooting and repairs for these parts? Thank you.

—> Purchase or Repair:
#John Deere by Jimmi on 2013-08-12 23:32
The SCV Setup panel on John Deere RE64583 7SUD5JD04 is malfunctioning, affecting the line. Urgently need repair service to address the issue and get production back on track.

—> Purchase or Repair:
#John Deere by steven schmit on 2013-05-02 02:50
The John Deere Bale Trak Plus RE159944 is displaying error code E001. The bale monitor is not detecting any bales although they are passing through. Need urgent assistance to troubleshoot and resolve this issue. Thank you.

—> Purchase or Repair:
#John Deere by Amanda Waters on 2013-07-06 00:09
The John Deere RE63440 7SUD4JD03 SCV setup panel is not functioning as expected. It seems to be acting unusual and not performing its usual functions.

—> Purchase or Repair:
#John Deere by Bud Gibson on 2013-09-09 00:00
Experiencing malfunction with John Deere AH2244250 electronic control unit. Device not responding to commands or displaying error codes. Urgent repair needed.

—> Purchase or Repair:
#John Deere by Goecker on 2014-11-21 21:12
Looking for repair services for my John Deere RE43902 7MRT2JD02 controller. The unit is failing to power up properly and needs immediate attention. Thank you.

—> Purchase or Repair:
#John Deere by Fabrizio Colucci on 2011-03-02 03:55
John Deere RE66821 7AT6JD01 unit tachometer malfunctioned, needs repair ASAP.

—> Purchase or Repair:
#John Deere by fatah on 2015-07-12 16:20
Hi there, we have a John Deere RE66265 Digital Tachometer that needs repair or replacement. Can you provide guidance on how to fix it or where to find a replacement part? Please reply ASAP. Thank you!

—> Purchase or Repair:
#John Deere by Derrick Taylor on 2014-12-24 12:06
I'm sorry to hear that your John Deere RE43902 7MRT2JD02 controller is no longer functioning properly. It seems like there might be an issue with its operation. I recommend reaching out to a technician for a closer look and assessment.

—> Purchase or Repair:
#John Deere by Dittrick on 2015-12-29 09:36
Can the John Deere RE64583 7SUD3JD01 SCV Setup Panel be repaired or bought to fix the issue you are experiencing? I'm trying to address this on my to-do list.

—> Purchase or Repair:
#John Deere by JMartins on 2015-01-10 04:41
Do you have a John Deere RE66265 7MRT8JDO1E Digital Tachometer available for repair or purchase? Need one urgently to keep production running smoothly.

—> Purchase or Repair:
#John Deere by Ghanshyam on 2015-08-01 17:20
The John Deere RE66265 7MRT8JDO1E digital tachometer is displaying abnormal behavior. It is not functioning as it typically does.

—> Purchase or Repair:
#John Deere by ATIF ALI on 2013-08-15 07:01
The SCV setup Panel on John Deere RE63440 7SUD4JD03 is malfunctioning, affecting the line's productivity. Urgent repair service is needed to resolve the issue

—> Purchase or Repair:
#John Deere by Kendra on 2014-07-29 05:24
RE43902 7MRT2JD02 showing error code 2143 Controller malfunction. Governor signal not received.

—> Purchase or Repair:
#John Deere by annamaria paliotti on 2016-11-07 03:44
Can you please confirm if the John Deere 120974T AT167497 monitor is still supported, and if it is, are replacement parts available for it? Thank you.

—> Purchase or Repair:
#John Deere by Nick Oshana on 2015-02-28 04:07
The John Deere RE64583 is displaying an SCV Setup Panel error. Unable to engage or control SCVs. Equipment is down. Need assistance urgently.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.