Procond Service & Repair Forum
One of the drives or boards in the Procond MC-70 124438 failed, need immediate attention. Heading to check it out now.
—> Purchase or Repair:
Reply🗨️Ask a New Question Below❓
Recent Comments Search: "Procond"
- Procond → Procond MC-70 124438 ↗
- Procond Elettronica → Procond Elettronica MC-70 124438 ↗
- Procond → Procond EWM 1000 PLUS W1A0DDBF ↗
- Procond → Procond MC-70 ↗
- Procond Elettronica → Procond Elettronica MC-70 motor controller ↗
If you need your Procond unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110
Recent 613 Comments
It seems that the Precond Elettronica 356084601 circuit of my Ariston LS 41 dishwasher is broken.Is it possible to buy a new one?How much would it cost?Thank youFabiana
—> Purchase or Repair:
—> Purchase or Repair:
One of the drives or boards on the Procond Elettronica MC-70 124438 treadmill controller just failed, please check it out ASAP.
—> Purchase or Repair:
—> Purchase or Repair:
The treadmill controllers of Procond Elettronica MC-70 124438 are malfunctioning, halting production. Urgent repair service is needed to resolve this issue
—> Purchase or Repair:
—> Purchase or Repair:
An firm intimate property and greatly ready treatment in behalf of Covid would be a significant breakthrough as a remedy for managing the pandemic, but two antivirals recently authorized in the US explore up with some eloquent caveats, including ungentlemanlike gear up and incident single to each th…Purchase or Repair: 
...
Show More
Show More
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, affecting the production line. Please address this issue urgently to minimize downtime.
—> Purchase or Repair:
—> Purchase or Repair:
I have a sears treadmill with mc-70 motor controller #124438 that has shorted diodes. I would like to have a price on repairs or replacement.Thanks Charles
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller unit is exhibiting unusual behavior during operation.
—> Purchase or Repair:
—> Purchase or Repair:
Could you please provide information or guidance for troubleshooting and repairing the Procond Elettronica MC-70 124438 treadmill board? My client is facing issues with this particular part and we would appreciate any assistance you can offer. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
I have some problems with my dishwasher Ariston LSI 66A, it seems the elettronic control does not work 45650110.It\'s possible to buy it on line? How does it cost?
—> Purchase or Repair:
—> Purchase or Repair:
My LUX washing machine was in problem. According to the technision the CPU is not working properly. He remove the CPU but he did not sure.The CPU written as below:GE Procond ElettronicaType P451510093 F:6473Type E.124303983SW Ver.W2C01551 24/giu./05My questions are:1. Can that unit be repair2. if it…Purchase or Repair: 
...
Show More
Show More
The treadmill controller for the Procond Elettronica MC-70 124438 is malfunctioning, affecting the entire production line. Urgent repair service needed to resolve the issue
—> Purchase or Repair:
—> Purchase or Repair:
Dear Sir/Madam:I need a device with tree switches. It must create the PWM to control the speed of a treadmill motor controller. One of the switch will turn on/off the treadmill the other two will be use to increase/decrease the speed of the motor or the treadmill. I want to eliminate the console of …Purchase or Repair: 
...
Show More
Show More
The Procond Elettronica MC-70 124438 treadmill board malfunctioned during the previous shift, causing unexpected downtime. I need a quick response before the next shift begins. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Me gustaria tener el diagrama electrico de su tarjeta con numero de parte 124438. Es posible conseguirla?
—> Purchase or Repair:
—> Purchase or Repair:
HI ThereI need a schematic over the above PCB. It is siiting in a Atlas NFS242 frezer
—> Purchase or Repair:
—> Purchase or Repair:
The Procond MC-70 124438 treadmill controller is malfunctioning, disrupting the production line. We need immediate repair service to address this critical issue and resume operations
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438, which serves as the treadmill controller, experienced a malfunction earlier today, causing unexpected downtime from 230 PM to 445 PM. I'm seeking a brief explanation before the next shift comes in. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with Procond Elettronica MC-70 124438 treadmill board. Need a skilled technician to repair an industrial unit immediately. Thank you.
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller is not working and needs attention.
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill board is displaying unusual behavior in the warehouse. It is not functioning as expected.
—> Purchase or Repair:
—> Purchase or Repair:
do you need the part #? dz1 is a zener 15v dz4a and b id zener 12v the d10 is a regular recti 1n4148
—> Purchase or Repair:
—> Purchase or Repair:
The treadmill controller (Procond Elettronica MC-70 124438) is malfunctioning, halting production. Urgent repair service required to address the issue
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill board is not functioning properly, which is halting the production line. Maintenance is urgently required to address this issue and resume operations
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a significant disruption to the production line. Urgent repair service intervention is required to restore operations
—> Purchase or Repair:
—> Purchase or Repair:
The red light is all the time flashing, when the the compressor first comes on it stays on for good 5-10 min and goes to standby and then when it comes back on after a while it stays on for round about 3 min and there about . The supper freeze dose not come on as well, so i will be very great full i…Purchase or Repair: 
...
Show More
Show More
I need a replacement board or the diodes replaced on a circuit board with #509130200 for a motor control unit (part number FR 131146900) from a White-Westinghouse LT 350R front loading washing machine.
—> Purchase or Repair:
—> Purchase or Repair:
I have a Damamaged control board for the above washing machine. The procond type number is 3560 041 10 AI am trying to get hold of the circuit information for this board.Can you help ?
—> Purchase or Repair:
—> Purchase or Repair:
HelloI would like to test this module, i don\'t know if it\'s working well Is it possible to have a schematic or technical datasheet of this moduleRef = Type P:451510051 F : 6210Type E: 12430392/5SW ver W2C01250 9/01THANKS A LOTBEST REGARDS
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill board is displaying unusual behavior in the warehouse.
—> Purchase or Repair:
—> Purchase or Repair:
The treadmill board on the Procond Elettronica MC-70 124438 is malfunctioning and affecting the production line. Urgent repair is needed to resume operations immediately.
—> Purchase or Repair:
—> Purchase or Repair:
I have a faulty control board for EWF 1620 The resistor R82 has burnt out. I wish to replace it but I do not know it\'s value. Please can you send me the value and a schematic please? Thank you for your help.
—> Purchase or Repair:
—> Purchase or Repair:
The treadmill controller (Procond Elettronica MC-70 124438) is malfunctioning, causing a halt in production. Immediate repair service is required to get the line moving again swiftly.
—> Purchase or Repair:
—> Purchase or Repair:
The Procond MC-70 124438 treadmill controller is malfunctioning, causing a halt in production. We need immediate repair service to resolve this issue and get the line running smoothly again. Please prioritize this matter for quick assistance.
—> Purchase or Repair:
—> Purchase or Repair:
Seeking assistance for a Procond Elettronica MC-70 124438 treadmill controller that is displaying error codes and not functioning properly. Need urgent repair service.
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 #124438 unit is displaying abnormal behavior in the warehouse. More specifically, it is not functioning as it typically does and is exhibiting strange actions.
—> Purchase or Repair:
—> Purchase or Repair:
I'm experiencing trouble with the Procond EWM 1000 Plus W1A0DDBF. It seems like there's an issue with the board, but I'm not entirely sure. The machine has stopped working properly.
—> Purchase or Repair:
—> Purchase or Repair:
Bonjour je recherche le module Procond elettronica 3560089039 pour un lave vaisselle FAGOR et le prixMerci
—> Purchase or Repair:
—> Purchase or Repair:
Experiencing issues with Procond Elettronica MC-70 124438 treadmill controller causing machine downtime. Need quick resolution before next shift. Please advise on the situation as soon as possible.
—> Purchase or Repair:
—> Purchase or Repair:
Hello. We invite you to the placement of video from yon the world. Online for Adults
—> Purchase or Repair:
—> Purchase or Repair:
The unit labeled Procond Elettronica MC-70 124438, which is the treadmill controller in the warehouse, is exhibiting unusual behavior. It is not functioning as expected and seems to be malfunctioning.
—> Purchase or Repair:
—> Purchase or Repair:
The unit Procond mc-70 124438 (treadmill controller) went down during the night shift. Needs follow-up during the day shift.
—> Purchase or Repair:
—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill controller is displaying error code E4, indicating a motor speed sensor malfunction.
—> Purchase or Repair:
—> Purchase or Repair:
Can the Procond Elettronica MC-70 124438 treadmill controller be repaired or replaced? I'm trying to check this off my to-do list.
—> Purchase or Repair:
—> Purchase or Repair:
I\'m dealing with problems in this machine . It is hard to start programs and when it start the machine run for several minutes and is working constantlywhen it has 51 minutes to remaining of the program. I think it is something wrong with Circuit-board Type P 451510069 F371. Please comment if it ri…Purchase or Repair: 
...
Show More
Show More
—> Purchase or Repair: