Procond Elettronica Service & Repair Forum

Hello, we have a Procond Elettronica MC-70 124438 treadmill controller that needs repair or replacement. Can you provide us with repair information or inform us where to find a replacement part? Thank you for your help.

—> Purchase or Repair: Ticket Image

— Posted by Renno on 2007-03-15

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Procond Elettronica"

If you need your Procond Elettronica unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 569 Comments

#Procond Elettronica by justin igarashi on 2007-05-18 17:21
The unit you're referring to is the treadmill controller Procond Elettronica MC-70 124438. The issue you're experiencing with it is erratic behavior.

—> Purchase or Repair:
#Procond Elettronica by Ruben Sousa on 2012-12-15 21:17
Hi there.I want to ask if you have this part supply on stock?!The reference is 132400 / 413 26 005.If you do, just tell me how much is the price in total with shipping to Portugal.Thank you very much.

—> Purchase or Repair:
#Procond Elettronica by Ilijanich on 2007-09-01 10:56
The Procond Elettronica MC-70 124438 treadmill controller is displaying error code E2, indicating a motor speed sensor problem.

—> Purchase or Repair:
#Procond Elettronica by lajcsi on 2010-11-23 13:27
please service manual

—> Purchase or Repair:
#Procond Elettronica by Emilio Utrilla on 2013-06-03 17:10
Hello, I need where to buy or repair a Procond elettronica 3560089039 module and the price.Its for an EDESA dishwasherThank you.Hallo,Bonjour je recherche le module Procond elettronica 3560089039 (neuf ou réparation du vieil) pour un lave vaisselle EDESA et le prixMerciHola,Estoy buscando un módulo …Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Marceta Predrag on 2013-09-11 08:28
Hello, I am reaching out regarding the Procond Elettronica 356033305 circuit board. We are requesting information regarding the availability of support, repairs, or replacement parts for this unit. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Orukwo Amaechi on 2012-03-24 09:17
Please get me quote urgently for a Procond Ellectronica capacitor/switch of 0.25 micro farad with part no 411135901 for dish washing machine. We need it to replace the faulty one on our dish washing machine with the following specification:ELX Model: LS9PPN: 9CGX50502215EL: AC 400 V3 N AC 230V/3/50H…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Tim Cumings on 2011-10-23 22:15
I have an error code e21 on my treadmill. I found that the speed sensor wire was broken off the screw on the motor attachment. Do you have one and how much is the cost. Thanks

—> Purchase or Repair:
#Procond Elettronica by B S Negi on 2005-12-28 02:12
The Procond Elettronica MC-70 124438 treadmill board is malfunctioning, causing a halt in production. Urgent repair service needed to resolve the issue

—> Purchase or Repair:
#Procond Elettronica by CHIRPpdm on 2022-01-27 01:09
antiquities. These are the Egyptian papyri

—> Purchase or Repair:
#Procond Elettronica by ennikl on 2013-08-12 11:35
The Procond Elettronica 356033305 47-90 circuit board is displaying Error Code E304 intermittently, preventing the equipment from powering up. Please advise on troubleshooting steps ASAP. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Tom Mitchell on 2008-02-19 11:27
Hello, I am a business customer seeking repair service for my Procond Elettronica MC-70 124438 treadmill board. The unit is exhibiting an issue where it fails to power on despite being connected to a power source. I have attempted to reset the unit multiple times without success. Based on initial di…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by Alice on 2006-06-20 02:32
The treadmill board on Procond Elettronica MC-70 124438 is malfunctioning, affecting the production line. Please address this issue urgently to resume operations

—> Purchase or Repair:
The Procond Elettronica MC-70 124438 treadmill board is not working.

—> Purchase or Repair:
#Procond Elettronica by Jim Cox on 2008-08-22 01:18
There is no resistor in R17 and JP1 and JP2 should be jumpered. What value do you have for R57?

—> Purchase or Repair:
#Procond Elettronica by Pavel Zima on 2012-01-10 12:52
HelloIs it possible to have a schematic or technical datasheet of this moduleProcond Elettronica 3560132009 Pavel Zima

—> Purchase or Repair:
#Procond Elettronica by Zsohár Imre on 2013-03-30 16:21
Please help me!AEG LAVATHERM Dryer turns off after 10 seconds.PNC: 91601416300S / N: 34285616I do not know what is wrong!

—> Purchase or Repair:
#Procond Elettronica by Jozsef Domonyik on 2011-08-09 17:38
HelloIs it possible to have a schematic or technical datasheet of this moduleProcond Elettronica 3560132009Thanks Jozsef

—> Purchase or Repair:
#Procond Elettronica by I Globerman on 2007-08-15 16:35
Dear team, there was a downtime incident involving the Procond Elettronica MC-70 124438, which is a treadmill controller. The issue occurred earlier today and I need a quick response before the next shift begins. Thank you.

—> Purchase or Repair:
#Procond Elettronica by ELBASSRI on 2007-06-02 14:41
HelloI would like to test this module, i don\'t know if it\'s working well Is it possible to have a schematic or technical datasheet of this moduleRef = Type P:451510051 F : 6210Type E: 12430392/5SW ver W2C01250 9/01THANKS A LOTBEST REGARDS

—> Purchase or Repair:
#Procond Elettronica by angel on 2012-01-17 03:14
do you need the part #? dz1 is a zener 15v dz4a and b id zener 12v the d10 is a regular recti 1n4148

—> Purchase or Repair:
#Procond Elettronica by Claude Coronado on 2007-04-24 20:20
The Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, causing delays in production. Please expedite repairs to minimize downtime on the line.

—> Purchase or Repair:
#Procond Elettronica by kellyTag on 2021-12-29 15:17
hello. topic for me thanks kelly

—> Purchase or Repair:
#Procond Elettronica by Charles Ray on 2008-05-28 13:34
I have a sears treadmill with mc-70 motor controller #124438 that has shorted diodes. I would like to have a price on repairs or replacement.Thanks Charles

—> Purchase or Repair:
The Procond Elettronica MC-70 141914 treadmill board is malfunctioning, hindering production. We need urgent repair service to address this issue swiftly and restore operations

—> Purchase or Repair:
#Procond Elettronica by Chansac on 2016-03-03 16:41
BonjourJe recherche le schéma pour une platine Procond électronica 356O1029 montée sur un réfrigérateur Brandt 1153HBien à vous

—> Purchase or Repair:
#Procond Elettronica by Eric Tibbits on 2008-01-05 21:41
I have been having problems adjusting the maximum speed potentiometer for my treadmill. I am not an electrical guy. Could you send me a drawing showing the location of this part so I can fix my treadmill. Thanks

—> Purchase or Repair:
#Procond Elettronica by Elmer on 2005-12-21 16:47
The Procond Elettronica MC-70 motor controller is malfunctioning, causing a critical stoppage in the production line. The motor is not responding to commands, impacting the entire process. Urgent repair service is required to resolve this issue

—> Purchase or Repair:
#Procond Elettronica by Mount on 2006-11-08 18:57
The treadmill controller on the Procond Elettronica MC-70 124438 is malfunctioning, disrupting the production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
#Procond Elettronica by Daviddoody on 2022-06-16 03:18
A large amount of people looking for a new job are unsure expediting veteran resume services constitutes a solid investment and this is a excellent puzzle, so we ought to first take a look at some of the every-day finishes that Commenced with executives that make the contract and use a on-the-ball r…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by ELIAS on 2006-11-16 10:57
The Procond Elettronica MC-70 124438 treadmill controller in the warehouse is displaying unusual behavior.

—> Purchase or Repair:
#Procond Elettronica by Lee Birloton on 2011-12-27 20:15
PLS price for Procond Elettronicatype:P451525507 F:3711Type: E132219814SW VER.W1a30140 07/dec/05Thanks for help L.Birloton

—> Purchase or Repair:
procono electtronica part 413 26 016I need this part to fix a machine

—> Purchase or Repair:
#Procond Elettronica by Riconda on 2007-03-20 16:01
Please provide information on whether Procond Elettronica MC-70 124438 treadmill controller is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Procond Elettronica by PAUL MITCHELL on 2007-10-05 15:57
HI THERE COULD YOU TELL ME THE PRICE FOR A NEW PART FOR A PROCOND ELETTRONICA PART NO 411122430 OUT OF A ZANNUSI WASHING MACHINE.MANY REGARDS PAUL.

—> Purchase or Repair:
#Procond Elettronica by Pelliculages on 2007-05-02 23:25
Hello, I'm interested in purchasing the Procond Elettronica MC-70 124438 treadmill controller. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:
#Procond Elettronica by SN on 2007-09-27 23:27
The Procond Elettronica MC-70 124438 treadmill controller unit went down mid-shift. Please follow up during the day.

—> Purchase or Repair:
#Procond Elettronica by freddy on 2009-01-30 03:07
Tengo problema con mi treadmill. aparece en la pantalla E2 lo que no permite que funcione mi treamill. Que debo hacer, por favcor ayudenme.gracias. espero su respuesta

—> Purchase or Repair:
#Procond Elettronica by Phala Kircus on 2005-12-20 23:47
The Procond Elettronica MC-70 motor controller is malfunctioning, causing a production line halt. Urgent repair needed to resume operations.

—> Purchase or Repair:
#Procond Elettronica by TAI on 2007-07-12 05:28
Hello, I am reaching out on behalf of my client who has a Procond Elettronica MC-70 124438 treadmill board that needs repair. We have the part number and understand that it's related to the treadmill board. Could you please provide information on repair services available for this specific part? Tha…Purchase or Repair: Ticket Image...
Show More
#Procond Elettronica by amador on 2007-04-17 22:15
the Procond Elettronica MC-70 124438 treadmill controller unit went down mid-shift. Please check it out first thing in the morning. Thanks!

—> Purchase or Repair:
#Procond Elettronica by karim on 2006-12-08 21:16
The board in the Procond Elettronica MC-70 124438 treadmill controller has failed, needs replacement ASAP. Please order a new one to ensure timely repair.

—> Purchase or Repair:
#Procond Elettronica by Gary Diamond on 2012-05-01 06:34
ARE YOU GUYS BUY USED BOARDS PULLED FROM TREADMILLSIF SO HOW MUCH NOT TESTED? OR REPAIRED, UNLESS YOU WANTED THEM REPAIRED

—> Purchase or Repair:
#Procond Elettronica by Garminzwfm on 2022-02-23 00:26
ancient and medieval Latin,

—> Purchase or Repair:
#Procond Elettronica by Cherry on 2006-03-04 13:15
Procond Elettronica MC-70 124438 treadmill controller is malfunctioning, disrupting the production line. Urgent repair service needed to restore operation

—> Purchase or Repair:
#Procond Elettronica by ruwinda sa on 2011-11-30 04:36
dir : mr ple give me a ELETTONIC CRD [ 3560 041 10 a] 0030-0013c cirkite diagram mr: Ruwinda E/N hotel blue woter sri lanka

—> Purchase or Repair:
#Procond Elettronica by MEYERS on 2006-11-16 05:57
Experiencing issues with Procond Elettronica MC-70 124438 treadmill board. Need a skilled technician to repair an industrial unit immediately. Thank you.

—> Purchase or Repair:
#Procond Elettronica by satheesh on 2007-01-30 03:23
Could you please provide information or guidance for troubleshooting and repairing the Procond Elettronica MC-70 124438 treadmill board? My client is facing issues with this particular part and we would appreciate any assistance you can offer. Thank you.

—> Purchase or Repair:
#Procond Elettronica by Hans Keldermans on 2007-03-09 03:48
One of the drives or boards on the Procond Elettronica MC-70 124438 treadmill controller just failed, please check it out ASAP.

—> Purchase or Repair:
#Procond Elettronica by Hassan Sulaiman on 2019-07-30 05:47
Hello,I ve this Procond Elettronica card part no: 12430381/5 356084806 of which its functionality is suspect. How can I get it tested/repair and what's the likely cost if I send it across to you for test/repair?Plse reply via email.Best rgds.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.