Allen Bradley Service & Repair Forum

Hi Sir, Good day. We are the R.C.S.I of Allen-Bradley and we are looking for the obsoleted part for AB Bulletin 1334. Pls refere to the attachment. There are total four pcs of board in the driver and we need these four plates, especially the power supply board. If you have stock or used surplus components, that will be ok for us. Just offer us your best price w/ trade term and L/T. If there\'s anything need to be clarified, you may free to contact me through out this mail address as well. Thanks again for your attention on this and have a great day. Brgs,Ms. Betta Wu----------------------------------------------Zenitech Automation Co., LTDTel: 06-2497999#14Fax: 06-2497666Cell: 0977191373(Β¨ΓˆΒ€Γ“)ADD: NO. 98, Wenshan Road, Rende Xiang, Tainan County 71742,Taiwan R.O.C.E-Mail: zeni.tech@msa.hinet.netWebsite: www.zenitech.com.tw ----------------------------------------------

β€”> Purchase or Repair: Ticket Image

β€” Posted by Betta Wu on 2011-12-01

ReplyπŸ—¨οΈAsk a New Question Below❓


Recent Comments Search: "Allen Bradley"

If you need your Allen Bradley unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 86 Comments

#Allen Bradley by Declan Farrelly on 2022-08-02 05:00
Hello, the Allen Bradley 1771-IAB AC/DC Input Module is showing error code E15 and is not detecting any input signals from the connected sensors. Equipment is currently down due to this issue. Please advise on necessary steps to resolve this problem.

β€”> Purchase or Repair:
#Allen Bradley by Guy Spiller on 2025-06-04 06:44
The Allen Bradley 6169IDEC/A disk controller card for PCD2 is causing equipment downtime. The system is displaying Error Code 101.urgence

β€”> Purchase or Repair:
#Allen Bradley by Jack Bohland on 2024-11-21 02:18
I think there might be a problem with the Allen Bradley 1756-ir6i, as something seems to have stopped working. Unfortunately, I'm not entirely sure what this model does, but I believe it's causing issues with the machine. Your attention to this matter would be greatly appreciated.β€”> …Purchase or Repair: Ticket Image...
Show More
#Allen Bradley by Bob Walker on 2019-09-26 22:08
Allen Bradley 150A650NBDA/B controller displaying error code 7E Motor not responding, production halted.

β€”> Purchase or Repair:
#Allen Bradley by Luis Ivan Calderon D on 2020-02-24 18:47
The Allen Bradley 40794-450-01-nnn3 is displaying Error Code 3023.

β€”> Purchase or Repair:
#Allen Bradley by elbruss on 2014-10-05 00:00
Allen Bradley 1785-LT2 displaying error code E3, not powering on. Need immediate repair assistance on industrial unit.

β€”> Purchase or Repair:
#Allen Bradley by Isaac on 2006-02-21 19:26
I recently bought 2 timers Cat -700FSD3LU23 and I would like to know if you could send me some more details about it?

β€”> Purchase or Repair:
#Allen Bradley by Dan Keeler on 2025-05-24 07:55
Do you have an Allen Bradley 1492CAB001H69 available for sale or repair? We need to keep production running smoothly and our unit is down.

β€”> Purchase or Repair:
#Allen Bradley by Dottore on 2024-09-07 08:06
Do you have an Allen Bradley 1336s-bx040-an-en-l6 available for purchase or repair? Our unit has gone down, and we need to keep production running.

β€”> Purchase or Repair:
#Allen Bradley by Atinesh on 2008-09-17 21:41
Hi Guys,I have a Allen Bradley 1336S driver connected to a unimac Machine. The machine was not working after i power spike i guess! i change two NTC on the Dc supply and also the 3-ohase rectifier also was shorted( 6RI30G-160). So it was tripping off the circuit breaker as soon as the door was close…Purchase or Repair: Ticket Image...
Show More
#Allen Bradley by Nouman on 2025-05-30 12:30
Can the Allen Bradley 1492XIM2012016R be repaired or purchased? I'm trying to check this off my to-do list. Thank you.

β€”> Purchase or Repair:
#Allen Bradley by John Malchow on 2022-01-05 15:43
Hello, I'm inquiring about an Allen Bradley 1492XIM2012016RF Wiring System, Digital Interface Module with 20 Pins (Master Only) for my client. Can you please provide information on troubleshooting or repair options for this specific module? Thank you.

β€”> Purchase or Repair:
#Allen Bradley by Harinder Sehra on 2024-09-30 17:12
I can help you with that. I will draft a message inquiring about the support and availability of parts for the Allen Bradley 1771-KX1. Thank you for providing the description and details.

β€”> Purchase or Repair:
#Allen Bradley by frank auditore on 2010-03-22 00:00
Machine displaying "HIM Communication Error." Driveshaft not rotating, no response to controls. Production halted.

β€”> Purchase or Repair:
#Allen Bradley by Gajanan on 2025-06-01 14:50
Hi there, we have a malfunction with the Allen Bradley 2198-E1004-ERS, a Kinetix 5 Servo Drive. We need repair information urgently. Can you provide details on where to send it for repairs? Thank you!

β€”> Purchase or Repair:
#Allen Bradley by Murray on 2025-05-23 07:25
The Allen Bradley 1794-1B16 COMPACTBLOCK I/O is not responding and the equipment it controls is not functioning. Error code 0x004B. Please assist with troubleshooting and repair. Thank you.

β€”> Purchase or Repair:
#Allen Bradley by Kim Vincent on 2025-05-19 20:30
I'm experiencing an issue with the Allen Bradley 3A2004 HR 2000 CONTROLLER. Something seems to have stopped working and I'm not sure what the model does exactly. Could you please advise on how to troubleshoot this problem?

β€”> Purchase or Repair:
#Allen Bradley by cross on 2019-09-07 02:49
The Allen Bradley 156484/02 is displaying Error Code 54. Equipment is not powering on despite multiple restart attempts. Please advise on next steps.

β€”> Purchase or Repair:
#Allen Bradley by Decio on 2023-07-21 19:46
We experienced a downtime incident with the Allen Bradley 1789L60 SoftLogix5860 Controller in the 16-slot virtual chassis. Need a quick explanation before the next shift.

β€”> Purchase or Repair:
#Allen Bradley by Sven Rookie on 2025-05-17 20:24
I'm reporting a unit downtime issue with the Allen Bradley 8000GC processor panel interface module. Can you provide some insight into what may have caused this and when it occurred? Thank you!

β€”> Purchase or Repair:
#Allen Bradley by voltronics on 2021-10-16 00:00
Our Allen Bradley 1203-GD1 is still down and we need assistance immediately. Kindly provide support as soon as possible.

β€”> Purchase or Repair:
#Allen Bradley by innes on 2008-08-27 00:00
The Allen Bradley PLC-5/40 CONTROLLER is not functioning properly and needs attention.

β€”> Purchase or Repair:
#Allen Bradley by VERAIN on 2025-04-23 01:27
The unit connected to the Allen Bradley SKH1SINFB1A0/A interface board in the warehouse is exhibiting abnormal behavior by not functioning as it usually does.

β€”> Purchase or Repair:
#Allen Bradley by robert gaudry on 2007-10-21 00:00
Allen Bradley 1746-hsce-a showing no display or response. Need assistance identifying and resolving the issue

β€”> Purchase or Repair:
#Allen Bradley by Leo Orciuoli on 2007-01-26 01:53
I have 6 abb powerflex 70 drives that were damaged because of a voltage surge/spike.1 - 1hp, 1- 3 hp, and 4 - 10hp. Please provide info on repair options.Thank You

β€”> Purchase or Repair:
#Allen Bradley by total on 2022-08-25 18:00
Please advise if the Allen Bradley 1747-L542 SERIES C PROCESSOR UNIT is still supported or if replacement parts are available. Our team is looking to find a replacement or repair option for this unit, but we are uncertain about its availability and manufacturer. Thank you.

β€”> Purchase or Repair:
#Allen Bradley by Betta Wu on 2011-12-01 08:37
Hi Sir, Good day. We are the R.C.S.I of Allen-Bradley and we are looking for the obsoleted part for AB Bulletin 1334. Pls refere to the attachment. There are total four pcs of board in the driver and we need these four plates, especially the power supply board. If you have stock or used surplus comp…Purchase or Repair: Ticket Image...
Show More
#Allen Bradley by Tonny Sutandar on 2016-08-19 00:00
Allen Bradley 1746-OW8-A Repair or Replacement? Hi there,I was asked to take care of the Allen Bradley 1746-OW8-A. I'm not exactly sure what it does, but before I move forward, do you know if it can be repaired or if we need to buy a replacement? Just trying to tick this off my to-do list. Your help…Purchase or Repair: Ticket Image...
Show More
Allen Bradley 1336-b020-eae-l3 showing no display or power. Need immediate repair service, please assist.

β€”> Purchase or Repair:
#Allen Bradley by Samir yousfi on 2025-05-27 22:30
Looking for a technician to repair an Allen Bradley AM7662 2 channel SSI interface module for a Compa system. Need assistance with troubleshooting the unit, currently experiencing issues.

β€”> Purchase or Repair:
#Allen Bradley by Arcangel on 2009-07-06 00:00
Issue Allen Bradley 1606-XL240E-3/A POWER SUPPLY failure causing production downtime. Urgent repair needed to resume line operation ASAP. Symptoms include loss of power to critical equipment. Need immediate diagnosis and resolution to avoid further delays. Prioritize service to minimize impact on pr…Purchase or Repair: Ticket Image...
Show More
#Allen Bradley by jim schuppe on 2025-05-15 04:14
The Allen Bradley 1785-L40BK/C is currently not working and the maintenance team needs assistance with it.

β€”> Purchase or Repair:
#Allen Bradley by James Tesche on 2007-10-31 15:43
I have a pannelveiw 1000 and the screen is going out. It is cat # 2711-T10G3 Ser A Rev K FRN 4.20Win (21)MK1MC3BC. I would like to get a quote on a repair. Thank you James D Tesche | Team Leader, Facilities & Maintenance ServicesT H E H E R S H E Y C O M P A N Y Hershey\'s Chocolate World800 Park Bo…Purchase or Repair: Ticket Image...
Show More
#Allen Bradley by rock on 2024-06-15 16:20
The Allen Bradley 1336-L7E unit is not functioning properly. It has features like Control Interface 1336, Contact Closure, and Encoder Loss Detect. More details may be needed to diagnose the issue accurately.

β€”> Purchase or Repair:
#Allen Bradley by sekar on 2019-07-22 08:50
Experiencing communication errors with Allen Bradley 1770-KFD DH-485 interface. Equipment down, displaying a 'No Response from Device' error. Need urgent assistance to troubleshoot and resolve.

β€”> Purchase or Repair:
#Allen Bradley by mohamad on 2011-04-23 16:34
powerflex 70 have input but no have out put and no display on him monitor and sts no have light kindly repay us as soon as possable

β€”> Purchase or Repair:
#Allen Bradley by Mbasera on 2025-04-24 11:51
The Allen Bradley 1333-BAN 2.2kW Inverter unit malfunctioned today, causing downtime from 230 PM to 445 PM. Please investigate and provide feedback before the next shift begins. Thank you!

β€”> Purchase or Repair:
#Allen Bradley by Rahardjo on 2025-05-31 18:59
I'm experiencing some issues with the Allen Bradley 6182H-10KEH6D. It seems like something stopped working on the machine. I'm not exactly sure what the model does, but I wanted to reach out for some help.

β€”> Purchase or Repair:
#Allen Bradley by JASON uEJO on 2022-12-26 20:23
The Allen Bradley PV+1250ColorKT DisplayModule is displaying Error Code 101. Equipment is currently down. Please advise on troubleshooting steps or repair options.

β€”> Purchase or Repair:
#Allen Bradley by N.L.C.A.Gunasekara on 2014-05-11 00:00
Getting an unknown error on Allen Bradley 22A-D8P7N104 POWERFLEX 4, impacting production line. Urgently need repair service to diagnose and resolve issue to minimize downtime.

β€”> Purchase or Repair:
#Allen Bradley by D S Somase on 2021-07-13 00:00
Allen Bradley 2711-t10c8 displaying a blank screen upon startup. Seeking repair service, expertise with troubleshooting display issues required.

β€”> Purchase or Repair:
#Allen Bradley by Hollingsworth on 2023-11-05 11:35
Issue Allen Bradley 2094-BL50S Line Interface Module malfunctioning, causing a critical delay in production. Urgent repair and replacement needed to resume operations immediately.

β€”> Purchase or Repair:
#Allen Bradley by Carrie on 2009-02-18 18:43
Allen Bradley Control 8600. Time out alarm kicks on and shuts down machine when want to run it.

β€”> Purchase or Repair:
#Allen Bradley by Pakpoom on 2019-02-26 03:59
The Allen Bradley 2711K14C3/A keypad in the warehouse is displaying erratic behavior - not functioning as expected. The unit is acting oddly and may require inspection or troubleshooting to determine the issue.

β€”> Purchase or Repair:
#Allen Bradley by Tom Hamilton on 2025-05-19 01:05
I have observed an Allen Bradley 592-C1FA unit in the warehouse exhibiting abnormal behavior. It is not functioning as expected.

β€”> Purchase or Repair:
#Allen Bradley by Dwight Oram on 2015-11-19 00:00
Allen Bradley 1747-l532-e not powering on, no lights or display. Need repair assistance urgently.

β€”> Purchase or Repair:
#Allen Bradley by Javier GonzΓ‘lez on 2025-05-15 13:03
Could you please confirm if the Allen Bradley 12m03-00211-02 unit is still supported or if replacement parts are available for it? We are looking to find a solution for this older unit, but we are unsure of its current status. Thank you.

β€”> Purchase or Repair:
#Allen Bradley by Sarath Fernando on 2016-12-15 00:00
Experiencing display issues on Allen Bradley 1400e 2711e-k14c6 f unit. Need immediate repair assistance.

β€”> Purchase or Repair:
#Allen Bradley by J.den Dekker on 2025-06-04 22:02
Hello, we are in need of repair info for an Allen Bradley 1771-igc module. Can you provide assistance or point us in the right direction? Thank you.

β€”> Purchase or Repair:
#Allen Bradley by Saldanha on 2005-07-13 00:00
I'm having trouble with my Allen Bradley 8520-ASM3 MACH TOOL PANEL. It seems to have stopped working suddenly. Any help would be greatly appreciated.

β€”> Purchase or Repair:

Contact Us

πŸš‘Shop LocationπŸ› οΈ

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
πŸš‘ Rush repair shipments only β€” no walk-ins.

πŸ“žPhone

1-336-969-0110

πŸ“¦Mailing AddressπŸš›

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
πŸ“¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.