Rittenhouse Service & Repair Forum

I HAVE A RITTENHOUSE INTERCOM AM/FM SYSTEM , MODEL # 9042 AND I AM TRYING TO FIND OUT WHAT SIZE[POWER REQUIREMENT] TRANSFORMER [ 4 WIRE] I NEED. I DO NOT HAVE THE OLD ONE. ANY HELP WOULD BE APPRECIATED. THANKS

β€”> Purchase or Repair: Ticket Image

β€” Posted by GARY KASPRZYK on 2007-12-26

ReplyπŸ—¨οΈAsk a New Question Below❓


Recent Comments Search: "Rittenhouse"

If you need your Rittenhouse unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 312 Comments

#Rittenhouse by vera price on 2009-07-29 12:53
I have a door bell Model C8229 that started to make a ringing sound. It looks as if the plates are vibrating.

β€”> Purchase or Repair:
#Rittenhouse by Tony Falco on 2012-04-17 19:38
Do you have available a manuel for the emerson ritterhouse RCM-4 intercom. I have to re- install mine

β€”> Purchase or Repair:
#Rittenhouse by Pamela Brawdy on 2008-08-19 20:43
My sister inlaw gave me this doorbell clock, I do not have the chimes the model number is RC6333. Can you help.

β€”> Purchase or Repair:
#Rittenhouse by Barbara on 2006-08-27 17:45
This is an old system I would like to replace. Does the wire plugs have to be replaced. I would like sm=omthing that will be compatable with the wire plugs. Do you have any suggestionsThank You

β€”> Purchase or Repair:
#Rittenhouse by R.Sarin on 2010-08-11 23:11
Hi I need a cover for the rittenhouse door chime model 380 can u pls get back to me thank you

β€”> Purchase or Repair:
#Rittenhouse by Delia Castillo on 2008-07-29 03:14
we bought this house with installed system. not working. power source not found.

β€”> Purchase or Repair:
#Rittenhouse by Marie Gunderman on 2007-11-26 01:41
We purchased our present home in 1998. It was custom built in 1983 with many upgrades that were available at that time. Unfortunately since we have lived here the system does not work. The main unit is 17\' wide and 9\" tall. There are 12 units scattered throughout the house. They each measure 7.5\"…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Mark Palmer on 2012-09-06 21:18
I have 2 Rittenhouse intercom speakers that need to be replaced. They both measure 9 1/4\" long. 6 1/4\" wide and 3 1/2\". Do yo have suitable replacements? If so, how much are they? Price of each unit, tax if aplicable and shipping charges for a total net price.Thanks in advance for your prompt rep…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Charles Rose on 2009-12-22 23:34
Need base station repaired. Would purchase old

β€”> Purchase or Repair:
#Rittenhouse by Colleen Wilkowski on 2011-04-28 15:24
I am searching for a User Manual for the Rittenhouse M9041 AM/FM Radio-Intercom system. The unit is original to the house built in 1982. I have found a tech manual with schematics but now need to locate a User Manual. Any suggestions would be appreciated. Thanks.

β€”> Purchase or Repair:
#Rittenhouse by DAVE ROSS on 2007-05-18 16:21
EVERYTHING WORKS FIND..JUST WANT TO UPDATE OLD UNIT

β€”> Purchase or Repair:
#Rittenhouse by Mark on 2017-09-04 20:48
I'm looking for a replacement circuit board for a Rittenhouse model C8538. Please let me know where I can purchase one.

β€”> Purchase or Repair:
#Rittenhouse by Jessica Rasmussen on 2010-07-17 03:18
I get typically one of three chimes to sound when the doorbell is rung, occassionally 2 followed by a buzzing sound. Some of the wires were loose and I tightened them, but still don\'t get all the tones. Any ideas on what to do to get all three chimes to ring?

β€”> Purchase or Repair:
#Rittenhouse by Maryellen Boudria on 2009-07-19 19:15
I have a Rittenhouse chime Model #410 with it\'s companion two chime on second floor of our 1927 home. The door bell chime works however we are not getting all chimes to work. Only two tones downstairs. Can this be repaired? Please advise.Also, can you tell me how old this model of Rittenhouse is?Ma…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Bob Hilsher on 2010-03-27 16:29
Unit stopped working. Have 16+ volts coming to it but no sound. Assume the syncronous motor is out... Telechron model M3151, Type H18, 3.6 rpm, 60 cy, 16 v. Is the replacement motor available? Price?Could it be anything else? All wiring is in tact on board.Thanks, Bob

β€”> Purchase or Repair:
#Rittenhouse by Krzysztof Charzynski on 2014-11-26 05:14
rittenhouse model 410 not working need repair

β€”> Purchase or Repair:
#Rittenhouse by Agnes R. Kellan on 2009-11-06 01:18
I have my radio-intercom since 1969--In hasn\'t worked for about three years. I have two stations.

β€”> Purchase or Repair:
#Rittenhouse by Chris Pellicano on 2009-11-11 03:52
I would like to get an estimate on testing and repairing any needed parts of our antique ( assuming it is antique,) doorbell. I love the way it sounds, from manually striking the chimes, but doesn\'t seem to work...

β€”> Purchase or Repair:
#Rittenhouse by David on 2018-03-04 18:16
Have you ever heard of a response on the Rittenhouse 631/632. I too am refurbishing one and need to know the correct tranformer voltage needed and a wiring diagram surely would help. Any insight?

β€”> Purchase or Repair:
#Rittenhouse by vero cho on 2007-06-19 19:49
sheetrocking my house after it was flooded by katrina, the contractor stupidly threw away the master station to my doorbell/radio/intercom system which rendered the system inoperable. i have asked an electrician friend to look at it and he cannot find a suitable retrofit. we will have to replace the…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by sonny sadler on 2011-11-21 16:12
i would like to have an updated model the one i have was installed in 1977 it makes noise, drifts off stations all controls are noisey and sound is garbled. can you tell me where to get help.

β€”> Purchase or Repair:
#Rittenhouse by GENE LAYNE on 2016-07-28 12:11
Can you advise if a Emerson Rittenhouse RC 577 Doorbell mechanical chime will work with a 24V Transformer?I have a 16V and wanted to add a camera to this?ThanksGene 732-754-1205I cannot locate a manual im guessing this was made in the 70\'s

β€”> Purchase or Repair:
#Rittenhouse by FLORENCE LUM on 2010-01-22 03:42
Is there someone in Honolulu, HI whom I can contact to test and repair my intercom, and replace my ON/Off switch @ the MASTER SPEAKER?We have enjoyed our unit for many years, since 1968.

β€”> Purchase or Repair:
#Rittenhouse by George Pond on 2019-07-27 20:32
Can you repair the solo kids on this 1950s era doorbell?It’s generally ok except that some of the parts that slide in the tubes to ring the chimes are lost. I could send it in or you could sell me the parts to fix it myself. Thanks,George Pond

β€”> Purchase or Repair:
#Rittenhouse by martin stacy on 2015-11-30 23:17
Hi, I just moved into house with Artolier Musician M7011 by Rittenhouse which doesn\'t work. I know you don\'t know why it doesn\'t work but any ballpark guesses at repair cost if I ship it to you? My zip is 516539 thx

β€”> Purchase or Repair:
#Rittenhouse by Paul E. Nelson on 2009-01-19 18:06
Our house came with this intercom system. Very Old I suspect. Is there anyone who could furnish me with a copy of the ownual\'s manual-instructions? Paul

β€”> Purchase or Repair:
#Rittenhouse by Paul Winchock on 2018-10-15 21:41
I have a Rittenhouse 550, 551 doorbell chime.The unit itself works fine. What I am missing (which someone was supposed to nor trash) is the transformer that sequences the chimes. Do you have a transformer for this that will work? And if so, obviously, what would one cost?Thank you for taking the tim…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by jimmy jamison on 2008-04-08 19:34
we have modle m7035 the door bell and gate buzzer in still workes but the talk butten and volumne dose not. would like to fix or replace unitplease help thank you

β€”> Purchase or Repair:
#Rittenhouse by Richard Baer on 2012-03-06 23:58
This unit puts out a chirping sound (Similar to sound of a smoke alarm) on a continuous basis, one chirp about every 30 seconds. Please advise what I should do, short of disconnecting the unit, to stop this annoying sound.Thank you,Richard Baer

β€”> Purchase or Repair:
#Rittenhouse by Mark Danko on 2015-09-10 19:17
Hi, need repair to this unit, sound cuts in and out when volume control knob is turned/wiggled. Moving molex 5 pin connector on circuit board also causes power to cut in and out. Mode delector knob has become stiff to operate. Please send estimate if repair is possible, thanks

β€”> Purchase or Repair:
#Rittenhouse by Ray G. Brubaker on 2017-09-11 14:32
I have a model Rittenhouse # E780DC door bell push button. The center plastic button is broken. I need a replacement . I can use the whole assemblyPlease email me as to where I can buy it. Thank you.

β€”> Purchase or Repair:
#Rittenhouse by william junker on 2010-03-20 16:08
I need a replacement part for this devise.

β€”> Purchase or Repair:
#Rittenhouse by Richard Greene on 2008-12-30 17:19
I own a late 60\'s Emerson Rittenhouse Model RC633 door bell Chime.The clock works fine but the door bell doesn\'t.I believe there is a problem with the motor.Can I have this unit repaired and approximately the cost?

β€”> Purchase or Repair:
#Rittenhouse by rosemary ortiz on 2009-11-11 22:30
we can not get it to chime in sequence. if doorbell is pressed it chimes once (#4).

β€”> Purchase or Repair:
#Rittenhouse by Terri McDougall on 2012-04-06 14:55
Our house was built in 1978 and we purchased it in 1997. It had the Rittenhouse monitor system in place with the main unit in the kitchen and smaller units scattered thought the house and in an attached apartment. The unit has never worked since we have been here and I was wondering if it is repaira…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by chris on 2015-08-27 21:30
I have gone through the trouble shooting I have 16 volts to the main unit just nothing coming out of main unit. like its acting as if there is no voltage. will not power up, no intercom, no radio is it replacement time or can this be repaired relatively cheap?

β€”> Purchase or Repair:
#Rittenhouse by Howard Robertson on 2012-11-19 01:59
intercom system does not work.would like to have it repaired.

β€”> Purchase or Repair:
#Rittenhouse by miriam spear on 2011-05-16 14:13
Only one of four chimes works, although we detect a faint electronic buzzing, in sequence, of the other three. For example, we hear Chime A, buzz, buzz, pause, buzz, buzz, Chime A. As cover has been lost, we suspect dust and grime is keeping the other hammers from working.Can the unit be cleaned and…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by sue wardy on 2010-02-22 15:07
static, fade in and out radio. intercom doesn\'t work but don\'t care about that just want the fm on radio to work more consistently

β€”> Purchase or Repair:
#Rittenhouse by Joseph LaBarbera on 2012-06-11 14:33
Would like to know if there is a replacement for this unit or where I can find a replacement knob for the Talk Listen stalk.

β€”> Purchase or Repair:
#Rittenhouse by Jens on 2007-09-29 19:23
Hi We stock this lamp in Sweden Price is 2 $ each + shipping (mail)JENSwww.JENSIgame.comJens@jensigame.com

β€”> Purchase or Repair:
#Rittenhouse by Fred on 2011-05-25 04:18
Art - did you get a reply in answer to your post?I am about to restore the same door chime, you may have info that can help.ThanksFred...

β€”> Purchase or Repair:
#Rittenhouse by Larry Graham on 2011-01-02 02:03
I am looking for a wiring diagram for a Rittenhouse, Spartan Electric, Fayettevile NC C8845 unit which is 30 to 35 years old. It seems to be either able to use two D cells or 16V transformer but I am got sure how to wire it up. Any ideas? Thanks.

β€”> Purchase or Repair:
#Rittenhouse by Lynn Villano on 2011-05-06 13:29
but want door bell to continue working. Can we get wiring schematics?

β€”> Purchase or Repair:
#Rittenhouse by scott grim on 2009-07-22 11:43
I\'ve recently come in the possesion of an emerson-rittenhouse model 633 door chime and clock. Somebody must have placed 120volts of power to the 16 volt circiut burning out all the electronics. I need all the electrical components including the hammars and motors. if anyone knows where i can get pa…Purchase or Repair: Ticket Image...
Show More
#Rittenhouse by Albert M. Brien on 2012-07-29 04:52
I have an older system, it was still working but when a water pipe broke behind my kitchen wall, it soaked the unit and ruined it. I want to know how much it would cost to have it replaced so I can get back the intercom and music function. Thank youAlbert Brien

β€”> Purchase or Repair:
#Rittenhouse by Bil Hoag on 2015-11-11 17:58
Installed in 1987 when we built the house. Has begun sporadic multiple, single dings, all hours, day and night. I have replaced, back up battery and fuse in motor. Now makes a fairly loud buzzing sound also. Thoughts?

β€”> Purchase or Repair:
#Rittenhouse by O. H. Towers on 2010-01-25 16:00
We are also electrical contractor company(Towers Electrical Serv. Inc)We are looking for a model C8931 R Chimer Receiver also a sender unit if possible.We cannot find any info on this item it was made ty Rittenhouse Fayettevilole, nc. 28302

β€”> Purchase or Repair:
#Rittenhouse by Tedd Boomershine on 2012-04-22 21:49
The clock works fine. Three of the door chimes work, but the fourth and fifth strikers do not work. Do you repair and or have parts to recondition? Thanks, Tedd

β€”> Purchase or Repair:
#Rittenhouse by Doug on 2011-10-01 20:21
I currently have this unit for sale on ebay. the wiring is simply two wires from the 16v transformer to the appropriate screw terminals on the printed circuit board and then the \"switch leg\" from each door bell button at the doors you are using attached to the corresponding terminal screw as label…Purchase or Repair: Ticket Image...
Show More

Contact Us

πŸš‘Shop LocationπŸ› οΈ

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
πŸš‘ Rush repair shipments only β€” no walk-ins.

πŸ“žPhone

1-336-969-0110

πŸ“¦Mailing AddressπŸš›

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
πŸ“¦ Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.