Advance Industries Service & Repair Forum

I have this board in my gate opener and trying to find out how to hook up a coaxial receiver and a owners manual thank you

—> Purchase or Repair: Ticket Image

— Posted by danny morales on 2012-04-04

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Sabin on 2009-11-23 23:58
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse. Please provide a description of the abnormal actions you are observing.

—> Purchase or Repair:
#Advance Industries by Crispian on 2009-05-23 15:59
The Advance Industries 116220 D 107243-0002 board malfunctioned and caused downtime today during the afternoon shift. Need resolution urgently.

—> Purchase or Repair:
#Advance Industries by Annadurdiev on 2009-10-11 14:22
The Advance Industries 116220 D 107243-0002 unit is currently down. Maintenance team has been notified.

—> Purchase or Repair:
#Advance Industries by Joe ODonovan on 2009-01-04 10:39
Hi, the Advance Industries 116220 D 107243-0002 is displaying Error Code 12 and the power indicator light is blinking red. The equipment is not responding to any commands. Please advise on troubleshooting steps or repairs needed. Thank you.

—> Purchase or Repair:
#Advance Industries by Dennis Sytsma on 2010-11-10 22:38
I need repair or replacement information regarding COPS board for the R-200 PN # 108939-0001 and other part numbers. Made by McKinney electronics for residential slide gate operator. Orginial part number was 940036-2 that came in a box marked overhead door company with no address. I purchased this s…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Igor Tustanowski on 2009-01-18 04:58
Do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit went down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by virenderm mudgil on 2015-08-12 16:20
Could you please provide information on whether the Advance Industries 116220 D 107243-0002 Gate Control Board is still supported or if replacement parts are available?

—> Purchase or Repair:
#Advance Industries by martin zarate on 2005-12-30 01:51
The logic timer board on our Advance Industries 116220D 107243-0002 is malfunctioning, causing an interruption in the production line. We need immediate repair service to rectify the issue and resume operations swiftly.

—> Purchase or Repair:
#Advance Industries by niaraki on 2009-12-26 10:17
The unit isn't working, please investigate.

—> Purchase or Repair:
#Advance Industries by ken castro on 2009-03-11 10:11
I'm sorry, but something seems to be off with the board on the Advance Industries 116220 D 107243-0002 machine. It appears to have stopped functioning correctly.

—> Purchase or Repair:
#Advance Industries by reidar on 2009-08-22 09:23
Hello, I hope this message finds you well. I would like to inquire if the Advance Industries 116220 D 107243-0002 board can be repaired or if a replacement can be purchased. I am trying to

—> Purchase or Repair:
#Advance Industries by Clarence Wilson on 2009-01-31 00:29
The Advance Industries 116220 D 107243-0002 board is malfunctioning. Maintenance team needs assistance to address the issue.

—> Purchase or Repair:
#Advance Industries by ismael on 2014-02-19 07:19
The Advance Industries 116220 D 107243-0002 circuit board malfunctioned causing unexpected downtime earlier today around 1130 am. Need to resolve this issue before the next shift starts. Any insights or suggestions would be greatly appreciated.

—> Purchase or Repair:
#Advance Industries by Susnjevic on 2009-07-28 15:42
I'm currently facing an issue with the Advance Industries 116220 D 107243-0002. It seems like there's a problem with the board, causing the machine to stop working properly. I will need to investigate further to determine the exact nature of the issue.

—> Purchase or Repair:
#Advance Industries by Donald Fellwock on 2009-02-07 12:25
The Advance Industries 116220 D 107243-0002 board malfunctioned today during the afternoon shift, causing significant downtime. Can you please provide a quick explanation of what might have caused the issue before the next shift begins? Thank you.

—> Purchase or Repair:
#Advance Industries by mark casey on 2012-06-07 20:32
I have manual for this oard if you still need it

—> Purchase or Repair:
#Advance Industries by Alexandros on 2009-11-19 10:02
Can this Advance Industries 116220 D 107243-0002 board be repaired or replaced? I'm just trying to check this off my to-do list.

—> Purchase or Repair:
#Advance Industries by Erdeljac on 2009-11-06 02:18
Hello, I'm reaching out for repair info on an Advance Industries 116220 D 107243-0002 board that stopped working. Can you provide details on where and how it can be repaired? Thanks.

—> Purchase or Repair:
#Advance Industries by Beniamin on 2009-12-16 23:16
Board on Advance Industries 116220 D 107243-0002 just went down. Need replacement ASAP to restore operation.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board just failed on machine 5. Need to replace ASAP to avoid downtime.

—> Purchase or Repair:
I need assistance with Advance Industries part number 116220 D 107243-0002, which is a Gate Control Board. My client is experiencing issues with this board and we would like more information on possible repairs or replacements. Thank you.

—> Purchase or Repair:
#Advance Industries by Cecilia Lobos on 2009-11-09 13:40
Hello, I hope this message finds you well. I am inquiring about the Advance Industries 116220 D 107243-0002 board. I would like to know if it is possible to have it repaired or if a replacement can be purchased. I am trying to

—> Purchase or Repair:
#Advance Industries by Lind on 2014-05-03 05:20
Advance Industries 116220 D 107243-0002 experiencing extensive circuit board failures disrupting production line. Urgent repair service needed to restore operations ASAP.

—> Purchase or Repair:
#Advance Industries by Nicolas Arbelaez on 2009-05-21 23:29
I believe there may be an issue with the Advance Industries 116220 D 107243-0002. It seems like the board is not functioning properly. I recommend having a technician take a look to diagnose the problem accurately.

—> Purchase or Repair:
#Advance Industries by Juergen.Arpe on 2009-12-29 13:17
I've noticed an issue with the Advance Industries 116220 D 107243-0002. It seems like something on the board has stopped working, but I'm not entirely sure what it does. I will report it to the appropriate department for further investigation.

—> Purchase or Repair:
#Advance Industries by Monroe Dodd on 2009-03-17 19:53
Hey, a unit went down mid-shift. Issue with Advance Industries 116220 D 107243-0002 board. Need to check and fix it ASAP.

—> Purchase or Repair:
#Advance Industries by daniele on 2009-11-29 14:19
I've noticed that the Advance Industries 116220 D 107243-0002 is experiencing issues seems like something stopped working on the board. It may require further inspection to determine the exact problem.

—> Purchase or Repair:
#Advance Industries by Steve Tryon on 2015-07-20 09:20
Hi, our Advance Industries 116220 D 107243-0002 gate control board is displaying error code E7 and the gate is not responding to commands. We need urgent assistance to get this equipment back up and running.

—> Purchase or Repair:
#Advance Industries by john.gilmore on 2011-10-31 13:04
I purchased a house with a garage door opener made by advance industries . The remote will only work if you have direct line of site with opener. I have put in fresh batteries. It appears to be very old.Any suggestions would be appreciated.Thanks

—> Purchase or Repair:
#Advance Industries by Gustavo Gil on 2009-07-29 01:00
The Advance Industries 116220 D 107243-0002 board is showing error code E102. Equipment is not powering up despite multiple restart attempts. Please advise.

—> Purchase or Repair:
#Advance Industries by Jerry Fields on 2011-05-12 15:21
I need to purchase 2 ea. Advance Industries Garage Door OpenersFCC ID: BSH8YN213

—> Purchase or Repair:
#Advance Industries by fahtom on 2009-10-19 14:22
The Advance Industries 116220 D 107243-0002 is showing error code E345 and is not starting up properly. Please advise on troubleshooting steps ASAP.

—> Purchase or Repair:
#Advance Industries by Fredrick Goll on 2009-07-13 21:44
I have two remotes and a receiver that I believe were made by Advance Industries, Shelbyville, Indiana. One of the remotes works only intermitently. I would like to repair or replace the remote or replace two remotes and the receiver unit on the Overhead Garage Door Opener. The opener works fine.I y…Purchase or Repair: Ticket Image...
Show More
I need a status update on the Advance Industries 116220 D 107243-0002 Circuit Board. The unit is still down. Please reply

—> Purchase or Repair:
#Advance Industries by Mitch on 2015-03-31 15:34
Contact me if you still need themMiMarch 31 2015

—> Purchase or Repair:
#Advance Industries by Schanz on 2009-01-13 23:00
Hello, I am contacting you on behalf of our client regarding Advance Industries 116220 D 107243-0002. They are experiencing issues with the board and are seeking assistance. Please provide details on how we can proceed with repair or replacement. Thank you.

—> Purchase or Repair:
#Advance Industries by Ikerman on 2009-03-11 13:11
Hello, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by julius on 2009-12-05 17:34
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. Urgent action needed for repair to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by jarvis on 2009-11-04 10:40
the Advance Industries 116220 D 107243-0002 board went down mid-shift. Need someone to check it out and troubleshoot ASAP. Thanks!

—> Purchase or Repair:
#Advance Industries by Stanleycib on 2015-10-28 11:28
Hey, the Gate Control Board (116220 D 107243-0002) just failed. Need to replace it ASAP to get the machine back online.

—> Purchase or Repair:
#Advance Industries by sutrisno on 2015-07-24 14:43
The Advance Industries 116220 D 107243-0002 Gate Control Board is not working properly.

—> Purchase or Repair:
#Advance Industries by shathi on 2009-10-23 11:15
I'm currently experiencing a problem with the Advance Industries 116220 D 107243-0002 machine. It seems that something stopped working and I'm not quite sure what the issue is. Any help or guidance you could provide would be greatly appreciated.

—> Purchase or Repair:
#Advance Industries by PROM on 2009-11-25 02:52
Hi, I am checking off my to-do list and wanted to ask if the Advance Industries 116220 D 107243-0002 board can be repaired or if a new one needs to be purchased? Thank you!

—> Purchase or Repair:
#Advance Industries by Samuel Morales on 2009-04-04 08:42
The Advance Industries 116220 D 107243-0002 board is not powering on, hindering production.

—> Purchase or Repair:
#Advance Industries by Temitope Egunjobi on 2014-11-28 17:16
The Advance Industries 116220 D 107243-0002 unit is currently not functioning. Maintenance team is aware and investigating the issue.

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-03-22 13:15
I have a touch n\'go remote garage door opener (390-19 mhz) for my overhead door garage opener and it works fine. I would love to get another one. I believe this has a date of 1985 on it and don\'t know if these are still possible to get. Any help? Thank yo

—> Purchase or Repair:
#Advance Industries by Toniolli on 2009-03-09 18:49
The Advance Industries 116220 D 107243-0002 board is not functioning normally. It is displaying unusual behavior and not performing its regular functions.

—> Purchase or Repair:
#Advance Industries by Marques Cedric on 2014-12-16 22:44
Equipment ID Advance Industries 116220 D 107243-0002Issue Machine not powering up, displaying Error Code 302. Investigation needed ASAP. Please advise on next steps.

—> Purchase or Repair:
#Advance Industries by Genoa on 2015-07-25 09:20
Hello, I'm inquiring about part number 116220 D 107243-0002, which is a Gate Control Board for Advance Industries. My client is experiencing some issues with this particular part and would like to get more information on repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by Weir on 2009-09-02 19:21
Please prioritize addressing the malfunction on the Advance Industries 116220 D 107243-0002 board as it's significantly impacting our production line. Your urgent attention to this matter is required to resume operations

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.