Advance Industries Service & Repair Forum

Please provide an update on the status of the Advance Industries 116220 D 107243-0002 board. The unit is still not functioning, and we need assistance urgently. Your

—> Purchase or Repair: Ticket Image

— Posted by JERE L. WILSON on 2009-05-31

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Temitope Egunjobi on 2014-11-28 17:16
The Advance Industries 116220 D 107243-0002 unit is currently not functioning. Maintenance team is aware and investigating the issue.

—> Purchase or Repair:
#Advance Industries by reidar on 2009-08-22 09:23
Hello, I hope this message finds you well. I would like to inquire if the Advance Industries 116220 D 107243-0002 board can be repaired or if a replacement can be purchased. I am trying to

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board is malfunctioning, halting the production line. Urgent repair needed to resume operations

—> Purchase or Repair:
#Advance Industries by Igor Tustanowski on 2009-01-18 04:58
Do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit went down and we need to keep production running. Thank you.

—> Purchase or Repair:
The circuit board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need immediate repair service to resolve this issue and get the line running smoothly again.

—> Purchase or Repair:
#Advance Industries by Sabin on 2009-11-23 23:58
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse. Please provide a description of the abnormal actions you are observing.

—> Purchase or Repair:
#Advance Industries by john.gilmore on 2011-10-31 13:04
I purchased a house with a garage door opener made by advance industries . The remote will only work if you have direct line of site with opener. I have put in fresh batteries. It appears to be very old.Any suggestions would be appreciated.Thanks

—> Purchase or Repair:
#Advance Industries by john stinger on 2015-07-25 22:20
I will reach out to the manufacturer to inquire if the Advance Industries 116220 D 107243-0002 Gate Control Board is still supported and if replacement parts are available.

—> Purchase or Repair:
#Advance Industries by DENISENKO on 2009-12-12 14:44
The Advance Industries 116220 D 107243-0002 is showing error code E043. Equipment is not powering up. Please advise on next steps for troubleshooting and repair.

—> Purchase or Repair:
I need a status update on the Advance Industries 116220 D 107243-0002 Circuit Board. The unit is still down. Please reply

—> Purchase or Repair:
#Advance Industries by mark casey on 2012-06-07 20:32
I have manual for this oard if you still need it

—> Purchase or Repair:
#Advance Industries by Carmona on 2009-10-26 12:23
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair? Production is down and we need a replacement urgently. Thank you.

—> Purchase or Repair:
#Advance Industries by Howard O Line on 2009-05-15 13:24
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by orru on 2009-07-18 12:38
Board on Advance Industries 116220 D 107243-0002 malfunctioning. Urgent repair needed to resume production. Line stoppage impacting output. Address immediately to avoid further delays.

—> Purchase or Repair:
#Advance Industries by Udoh on 2009-12-18 22:06
Hello, I am interested in the Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Dave Mitton on 2009-10-16 17:31
Do you have any Advance Industries 116220 D 107243-0002 boards available for sale or repair to keep production running?

—> Purchase or Repair:
#Advance Industries by NOE VALADEZ on 2009-09-24 02:07
Could you please provide details on repair services and estimated costs for Advance Industries 116220 D 107243-0002 board in need of service? Thank you.

—> Purchase or Repair:
#Advance Industries by Samuel Morales on 2009-04-04 08:42
The Advance Industries 116220 D 107243-0002 board is not powering on, hindering production.

—> Purchase or Repair:
#Advance Industries by Paco on 2009-12-19 18:47
The Advance Industries 116220 D 107243-0002 board is not working as reported.

—> Purchase or Repair:
#Advance Industries by Jerry Fields on 2011-05-12 15:21
I need to purchase 2 ea. Advance Industries Garage Door OpenersFCC ID: BSH8YN213

—> Purchase or Repair:
#Advance Industries by sutrisno on 2015-07-24 14:43
The Advance Industries 116220 D 107243-0002 Gate Control Board is not working properly.

—> Purchase or Repair:
#Advance Industries by Hubie Colquitt on 2009-06-14 18:56
Could you please provide repair information for the Advance Industries 116220 D 107243-0002 board? Our team on-site urgently needs to replace it. Thank you.

—> Purchase or Repair:
#Advance Industries by GEORGE SUTTON on 2009-02-23 12:04
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior - it is not functioning as it normally does.

—> Purchase or Repair:
#Advance Industries by daniele on 2009-11-29 14:19
I've noticed that the Advance Industries 116220 D 107243-0002 is experiencing issues seems like something stopped working on the board. It may require further inspection to determine the exact problem.

—> Purchase or Repair:
#Advance Industries by Stacey on 2014-10-17 16:03
Machine 116220 D 107243-0002 is not booting up, displaying "Error Code 34".

—> Purchase or Repair:
#Advance Industries by Curran on 2009-09-14 12:12
Looking for repair for an Advance Industries 116220 D 107243-0002 board. Unit not functioning, need a technician ASAP.

—> Purchase or Repair:
#Advance Industries by Corey love on 2009-03-11 04:11
Could you please provide me with pricing and availability details for the Advance Industries 116220 D 107243-0002 board? I am looking to source one quickly and would appreciate your

—> Purchase or Repair:
#Advance Industries by walter zambrana on 2012-04-22 18:37
I would like to replace the 2 remotes controls that I have. the following information is: FCC ID: BSH8YN106546. FREQ. 360- MFG91 168.Your response by E-mail will be really appreciate.

—> Purchase or Repair:
#Advance Industries by Palmer Rodgers on 2009-06-12 20:28
Hey there, can you provide repair info for Advance Industries 116220 D 107243-0002 circuit board? It stopped working and we need a replacement or repair solution urgently. Thank you for your

—> Purchase or Repair:
#Advance Industries by Thomasvog on 2009-12-29 11:17
One of the Advance Industries 116220 D 107243-0002 units in the warehouse is behaving unusually. It is not functioning as it typically does. Please take a look at it when you get a chance. Thank you.

—> Purchase or Repair:
#Advance Industries by Luley on 2009-05-17 18:18
Drive or board failure on Advance Industries 116220 D 107243-0002. Need immediate attention to prevent downtime.

—> Purchase or Repair:
#Advance Industries by Manoj Bhandarkar on 2009-12-03 20:32
Hi there, I need repair info for Advance Industries 116220 D 107243-0002 board. Can you provide details ASAP? Thank you!

—> Purchase or Repair:
#Advance Industries by Scheele on 2014-11-18 00:25
We experienced downtime with Advance Industries 116220 D 107243-0002 due to a faulty circuit board at 1030 pm last night. Need a quick resolution before the next shift starts.

—> Purchase or Repair:
#Advance Industries by Dan Potts on 2009-12-31 06:31
Hi there. We're in urgent need of repair information for an Advance Industries 116220 D 107243-0002 board. Urgently seeking guidance on replacement or repair. Appreciate a quick response. Thank you!

—> Purchase or Repair:
#Advance Industries by HESAM on 2009-08-13 05:45
Hello, I need someone to repair my Advance Industries 116220 D 107243-0002 board. It's malfunctioning and affecting our production. Your urgent attention is greatly appreciated.

—> Purchase or Repair:
#Advance Industries by Ronaldabamy on 2009-10-25 16:46
Machine displaying error code "E02 - Main Board Failure."

—> Purchase or Repair:
#Advance Industries by danny morales on 2012-04-04 04:00
I have this board in my gate opener and trying to find out how to hook up a coaxial receiver and a owners manual thank you

—> Purchase or Repair:
#Advance Industries by Gaudette on 2009-07-13 09:11
I'm experiencing a problem with the Advance Industries 116220 D 107243-0002 - it seems like the board is malfunctioning. I'm not entirely sure what this model does, but something has definitely stopped working.

—> Purchase or Repair:
It seems like there may be an issue with the Advance Industries 116220 D 107243-0002 board. Something seems to have stopped working, and I'm not entirely sure what that could mean functionally. I'll do my best to figure it out and get it resolved for you.

—> Purchase or Repair:
#Advance Industries by huanmatusp on 2009-08-01 15:02
Drive 107243-0002 on Advance Industries 116220 D failed, need replacement ASAP. Keep line running smoothly.

—> Purchase or Repair:
#Advance Industries by naeem ahmed on 2009-07-05 20:41
The Advance Industries 116220 D 107243-0002 unit is not functioning correctly. The maintenance team needs assistance with it.

—> Purchase or Repair:
#Advance Industries by Michelle Hurley on 2014-01-07 19:22
We experienced downtime with the Advance Industries 116220 D 107243-0002 circuit board earlier today around 230 PM. Can you provide some insight into what might have caused the issue? It's crucial information we need before the next shift begins. Thank you!

—> Purchase or Repair:
#Advance Industries by Sandra Contreras on 2009-12-11 02:24
Hello, I hope you're doing well. I was asked to get the Advance Industries 116220 D 107243-0002 board fixed or replaced. Before making a decision, may I know if it's possible to repair this board or if it needs to be purchased new? I'm trying to get this resolved as soon as possible. Thank you for y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by atilla on 2009-06-23 01:10
Hello, I am interested in purchasing the Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are in urgent need of sourcing one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by sumesh on 2009-07-19 20:15
Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 board. I was told to get this fixed or replaced, but I'm not sure what it does. Can this board be repaired or purchased as a replacement? I'm looking to check this off my to-do list. Thank you.

—> Purchase or Repair:
#Advance Industries by naden on 2009-08-14 20:50
Looking for repair on Advance Industries 116220 D 107243-0002 board. Currently not functioning or powering up. Need someone to diagnose and fix the issue

—> Purchase or Repair:
#Advance Industries by WILLIAMSON on 2009-01-26 16:35
The board for the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need urgent repair service to resolve the issue and get the production line running smoothly again.

—> Purchase or Repair:
#Advance Industries by Ricardo Rivas on 2009-07-29 13:53
The Advance Industries 116220 D 107243-0002 board is showing Error Code 3B. Equipment not powering on properly. Need urgent repair.

—> Purchase or Repair:
#Advance Industries by SUSAN on 2009-05-05 04:44
Do you have another Advance Industries 116220 D board available for sale or repair? Production is currently down and we need to keep things running.

—> Purchase or Repair:
I'm working with Advance Industries 116220 D 107243-0002, and the board seems to be the issue. The equipment is down, and I'm not sure why. No error code is displaying. Please advise on next steps to troubleshoot.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.