Advance Industries Service & Repair Forum

Board 107243-0002 in Advanced Industries 116220 D just failed. Need to swap it out ASAP to keep the equipment running.

—> Purchase or Repair: Ticket Image

— Posted by Raskar on 2009-11-10

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Golub on 2009-10-22 20:59
Advance Industries 116220 D 107243-0002 is down with Error Code E12 indicating a board issue. Please advise on next steps for repair. Thank you.

—> Purchase or Repair:
#Advance Industries by Conrad on 2015-05-15 21:48
Remote control: Crusader Solid State Model 200SS/202SS

—> Purchase or Repair:
#Advance Industries by Burhanettin SEN on 2009-12-18 19:06
The board for the Advance Industries 116220 D 107243-0002 unit is exhibiting unexpected behavior. It is not functioning as it typically does.

—> Purchase or Repair:
#Advance Industries by SUSAN on 2009-05-05 04:44
Do you have another Advance Industries 116220 D board available for sale or repair? Production is currently down and we need to keep things running.

—> Purchase or Repair:
#Advance Industries by Joe ODonovan on 2009-01-04 10:39
Hi, the Advance Industries 116220 D 107243-0002 is displaying Error Code 12 and the power indicator light is blinking red. The equipment is not responding to any commands. Please advise on troubleshooting steps or repairs needed. Thank you.

—> Purchase or Repair:
#Advance Industries by lora linville on 2009-05-18 17:43
Hello, I am reaching out on behalf of a client who is in need of assistance with an Advance Industries 116220 D 107243-0002 board. They have indicated that there seems to be an issue with the board. Can you please provide information on potential repair options and cost estimates? Thank you.—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Josef on 2009-11-12 04:34
Hello, do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit is down and we need to keep production running. Thank you.

—> Purchase or Repair:
Please contact me asap about my board repair, I thank it was shiped on friday, thats what i need to know. Thank you Bret Moore

—> Purchase or Repair:
#Advance Industries by Steven Lorke on 2014-06-27 21:50
Machine is not powering on.

—> Purchase or Repair:
#Advance Industries by berrier on 2009-09-25 02:48
I'm sorry to inform you that something seems to have stopped working with your Advance Industries 116220 D 107243-0002. We're not entirely sure what the issue is, but we are looking into it to get it resolved as soon as possible. Thank you for your patience and understanding.

—> Purchase or Repair:
#Advance Industries by julius on 2009-12-05 17:34
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. Urgent action needed for repair to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by Peter Komrhel on 2009-11-25 17:15
Hello, we are in need of repair information for the Advance Industries 116220 D 107243-0002 board. Could you please provide us with details on how we can get this fixed as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by huanmatusp on 2009-08-01 15:02
Drive 107243-0002 on Advance Industries 116220 D failed, need replacement ASAP. Keep line running smoothly.

—> Purchase or Repair:
#Advance Industries by Lynn Waterhouse on 2005-12-30 03:51
The logic timer board (Advance Industries 116220D 107243-0002) is malfunctioning, causing a halt in production on the line. Urgent action is required to resolve this issue

—> Purchase or Repair:
#Advance Industries by Donald Fellwock on 2009-02-07 12:25
The Advance Industries 116220 D 107243-0002 board malfunctioned today during the afternoon shift, causing significant downtime. Can you please provide a quick explanation of what might have caused the issue before the next shift begins? Thank you.

—> Purchase or Repair:
#Advance Industries by Davette on 2014-05-06 16:20
The Advance Industries 116220 D 107243-0002 unit is not working.

—> Purchase or Repair:
#Advance Industries by Susnjevic on 2009-07-28 15:42
I'm currently facing an issue with the Advance Industries 116220 D 107243-0002. It seems like there's a problem with the board, causing the machine to stop working properly. I will need to investigate further to determine the exact nature of the issue.

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-03-22 13:20
I forgot to mention the model of the door opener is R80-az It is 115volts and 60amps 1/3 hp. There is a separate antenna mod 702 ser#751015 code 390-19 Thank you

—> Purchase or Repair:
#Advance Industries by aziz fayek aziz on 2009-10-20 12:32
Issue The Advance Industries 116220 D 107243-0002 board is not powering on.

—> Purchase or Repair:
#Advance Industries by danny morales on 2012-04-04 03:50
I have this board in my gate opener and need to find owner manual or just need to find out how to hook up the coaxial receiver to this board 760 252 9000

—> Purchase or Repair:
#Advance Industries by Carolyn McCrary on 2009-12-14 06:48
"Unit 116220 D 107243-0002 board failure during night shift. Needs attention ASAP. - Maintenance Crew"

—> Purchase or Repair:
#Advance Industries by Igor Tustanowski on 2009-01-18 04:58
Do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit went down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by Ethan on 2009-11-20 19:54
The board on our Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in our production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
#Advance Industries by Amy L. Jones on 2014-11-01 18:57
Circuit board in the Advance Industries 116220 D 107243-0002 just failed - need a replacement ASAP!

—> Purchase or Repair:
#Advance Industries by DENISENKO on 2009-12-12 14:44
The Advance Industries 116220 D 107243-0002 is showing error code E043. Equipment is not powering up. Please advise on next steps for troubleshooting and repair.

—> Purchase or Repair:
#Advance Industries by JORGE TALERO on 2009-05-25 01:00
Hello, I'm reaching out regarding the Advance Industries 116220 D 107243-0002 board. I was instructed to either repair or replace it, but I'm uncertain of its function. Could you please advise if this item can be repaired or if a new one needs to be purchased? I'm aiming to

—> Purchase or Repair:
#Advance Industries by troy gowan on 2010-09-16 21:08
I have a overhead garage doors opener. model 100. I am looking for a replacment remot and reciverreciver number is 107224-0014

—> Purchase or Repair:
#Advance Industries by Tibbetts on 2009-03-17 00:45
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need immediate repair service to resolve this critical issue and get the production line back up and running.

—> Purchase or Repair:
#Advance Industries by Gustavo Gil on 2009-07-29 01:00
The Advance Industries 116220 D 107243-0002 board is showing error code E102. Equipment is not powering up despite multiple restart attempts. Please advise.

—> Purchase or Repair:
#Advance Industries by nevardo vera on 2005-10-27 01:00
Advance Industries 116220D 107243-0002 logic timer board is malfunctioning, causing a disruption in the production line. Need urgent repair to resume operations

—> Purchase or Repair:
#Advance Industries by Jarod Ballardo on 2009-05-29 07:06
The Advance Industries 116220 D 107243-0002 board is not working as per the shop.

—> Purchase or Repair:
#Advance Industries by Luis Raul Godinez on 2006-11-16 11:57
The Advance Industries 116220-D 107243-0002 is a control board unit that is not functioning.

—> Purchase or Repair:
#Advance Industries by Savoskin on 2009-11-25 04:52
Need help fixing Advance Industries 116220 D 107243-0002 board. We can't get it to power up, all lights remain off. Send someone ASAP. Thanks!

—> Purchase or Repair:
#Advance Industries by Schanz on 2009-01-13 23:00
Hello, I am contacting you on behalf of our client regarding Advance Industries 116220 D 107243-0002. They are experiencing issues with the board and are seeking assistance. Please provide details on how we can proceed with repair or replacement. Thank you.

—> Purchase or Repair:
#Advance Industries by Lebedev on 2014-12-18 09:44
Machine is not powering on.

—> Purchase or Repair:
#Advance Industries by Ray Hellmann on 2014-05-02 18:20
The Advance Industries 116220 D 107243-0002 circuit board is not working.

—> Purchase or Repair:
#Advance Industries by Sylvia laoutas on 2009-03-10 23:11
The unit Advance Industries 116220 D 107243-0002 is exhibiting abnormal behavior in the warehouse. It is not functioning as usual, acting strangely.

—> Purchase or Repair:
#Advance Industries by HESAM on 2009-08-13 05:45
Hello, I need someone to repair my Advance Industries 116220 D 107243-0002 board. It's malfunctioning and affecting our production. Your urgent attention is greatly appreciated.

—> Purchase or Repair:
#Advance Industries by john.gilmore on 2011-10-31 13:04
I purchased a house with a garage door opener made by advance industries . The remote will only work if you have direct line of site with opener. I have put in fresh batteries. It appears to be very old.Any suggestions would be appreciated.Thanks

—> Purchase or Repair:
#Advance Industries by Derek Baker on 2014-04-02 00:07
The circuit board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a production line disruption. Urgent repair service needed to rectify the issue

—> Purchase or Repair:
#Advance Industries by Ray Knichel on 2009-08-01 17:02
Machine is not responding to power button; displaying error code E3.

—> Purchase or Repair:
#Advance Industries by rodriguez on 2009-12-08 15:51
Can the Advance Industries 116220 D 107243-0002 board be repaired or bought? Just trying to check this off my to-do list.

—> Purchase or Repair:
#Advance Industries by Nicolas Arbelaez on 2009-05-21 23:29
I believe there may be an issue with the Advance Industries 116220 D 107243-0002. It seems like the board is not functioning properly. I recommend having a technician take a look to diagnose the problem accurately.

—> Purchase or Repair:
#Advance Industries by Rudy Martens on 2009-12-17 22:53
Machine displaying error code X32 upon startup.

—> Purchase or Repair:
#Advance Industries by Jose Diaz on 2006-11-08 22:57
The control board on our Advance Industries 116220-D 107243-0002 is malfunctioning, causing a production line halt. We need urgent repair service to address this issue and resume operations

—> Purchase or Repair:
#Advance Industries by McSpadden on 2009-11-17 20:23
I'm sorry, but something seems to be off with the Advance Industries 116220 D 107243-0002 board. It appears to have stopped working properly.

—> Purchase or Repair:
#Advance Industries by Dave Mitton on 2009-10-16 17:31
Do you have any Advance Industries 116220 D 107243-0002 boards available for sale or repair to keep production running?

—> Purchase or Repair:
#Advance Industries by PROM on 2009-11-25 02:52
Hi, I am checking off my to-do list and wanted to ask if the Advance Industries 116220 D 107243-0002 board can be repaired or if a new one needs to be purchased? Thank you!

—> Purchase or Repair:
#Advance Industries by Joseph Conner on 2009-03-11 17:11
Please provide an update on the status of our Advance Industries 116220 D 107243-0002 board. The unit is still down, and we require immediate attention. Your

—> Purchase or Repair:
#Advance Industries by DeeAnne on 2005-08-30 23:03
Hi,I am in desparate need of a wiring diagram for an Advance industries 116220D board for a Mckinney Electronics operator. We need to add a reflective detector and the board we have does not have a labelled terminal block. We would appreciate any information you might have.Thanks,DeeAnne—> …Purchase or Repair: Ticket Image...
Show More

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.