Advance Industries Service & Repair Forum

We experienced unexpected downtime with the Advance Industries 116220 D 107243-0002 board last night at 1000 pm. Please investigate and provide feedback urgently.

—> Purchase or Repair: Ticket Image

— Posted by Pertijs on 2009-11-24

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Nicandro on 2009-11-25 22:15
Please provide guidance on whether the Advance Industries 116220 D 107243-0002 board is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Advance Industries by JIM on 2008-10-01 19:53
COULD YOU POINT ME IN THE RIGHT DIRECTION FOR A MANUAL FOR A 116220D? I;M TRYING TO DISABLE THE TIMER OR ADD PHOTO EYES.

—> Purchase or Repair:
#Advance Industries by Cherrington on 2015-08-10 00:20
Hello, our Advance Industries 116220 D 107243-0002 Gate Control Board is displaying error code E05 and the gate is not responding to any commands. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by Brian Chiddick on 2009-09-01 17:31
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by wiley on 2009-11-17 19:47
Hello, I'm inquiring about the Advance Industries 116220 D 107243-0002 board. Can this item be repaired or replaced? I'm trying to get this sorted as soon as possible. Thank you!

—> Purchase or Repair:
#Advance Industries by Bonnie Briggs on 2021-03-31 20:15
I have 2 remote garage door openers made by Advance Industries, Shelbyville, IN. One works very well. The other was kept in storage and the battery inside leaked and corroded the battery connector. These use a 9-volt battery. The FCC ID number is BSH8YN106546 and the MFG. number is 081587. The Freq.…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Leach on 2014-04-03 17:29
The circuit board in Advance Industries 116220 D 107243-0002 just went out, causing a machine shutdown. Need immediate replacement to keep the line running.

—> Purchase or Repair:
#Advance Industries by Ronaldabamy on 2009-10-25 16:46
Machine displaying error code "E02 - Main Board Failure."

—> Purchase or Repair:
#Advance Industries by Russell Diaz on 2009-05-06 18:25
I work for Overhead Door Company of Las Cruces and we have the logic timer board in stock, but nobody hear seems to know what it goes into. We assume it\'s for a gate operator but we don\'t lnow which model> I believe it maybe for several different models.Can you help?Thanks

—> Purchase or Repair:
#Advance Industries by manny on 2005-12-21 00:47
Logic timer board in Advance Industries 116220D 107243-0002 is malfunctioning, halting production line. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by Williams on 2009-11-13 00:48
I have been searching everywhere for an opener to my garage door.It is an older model manufactured by Overhead Door with a transformer attached manufactured by Advance Industries class 2 year \'92 model.If you have a solution please email me or call me at (903)819-5907.

—> Purchase or Repair:
#Advance Industries by Udoh on 2009-12-18 22:06
Hello, I am interested in the Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Howard on 2009-10-20 17:32
We experienced downtime with the Advance Industries 116220 D 107243-0002 unit today due to a board issue. The incident occurred during the night shift around 1130 PM. Can you provide insights on what might have caused it before the next shift begins?

—> Purchase or Repair:
#Advance Industries by Nabil Ghanem on 2009-11-18 09:51
The Advance Industries 116220 D 107243-0002 board is malfunctioning, causing a complete halt in the production line. Urgent repair service is required to address the issue

—> Purchase or Repair:
#Advance Industries by Dennis McCollums on 2009-11-19 17:31
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse.

—> Purchase or Repair:
#Advance Industries by Gustavo Gil on 2009-07-29 01:00
The Advance Industries 116220 D 107243-0002 board is showing error code E102. Equipment is not powering up despite multiple restart attempts. Please advise.

—> Purchase or Repair:
#Advance Industries by Kei Saito on 2005-12-09 21:47
The Advance Industries 116220D logic timer board with model number 107243-0002 is behaving unexpectedly. It is not operating as usual and displaying strange characteristics. Please investigate the issue further to determine the cause of the abnormal behavior.

—> Purchase or Repair:
Advance Industries 116220 D 107243-0002 board went down mid-shift. Need someone to follow up during the day.

—> Purchase or Repair:
#Advance Industries by Dave Mitton on 2009-10-16 17:31
Do you have any Advance Industries 116220 D 107243-0002 boards available for sale or repair to keep production running?

—> Purchase or Repair:
#Advance Industries by Gaudette on 2009-07-13 09:11
I'm experiencing a problem with the Advance Industries 116220 D 107243-0002 - it seems like the board is malfunctioning. I'm not entirely sure what this model does, but something has definitely stopped working.

—> Purchase or Repair:
#Advance Industries by ADNAN HRNJIC on 2014-02-12 18:58
Hi there! Just wanted to bring to your attention that the Advance Industries 116220 D 107243-0002 circuit board malfunctioned earlier today at 330 PM, causing downtime for the production line. Could you please provide insights on what might have caused the issue? Thank you!

—> Purchase or Repair:
#Advance Industries by Schanz on 2009-01-13 23:00
Hello, I am contacting you on behalf of our client regarding Advance Industries 116220 D 107243-0002. They are experiencing issues with the board and are seeking assistance. Please provide details on how we can proceed with repair or replacement. Thank you.

—> Purchase or Repair:
#Advance Industries by Ikerman on 2009-03-11 13:11
Hello, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
Dear Sir/Madam,I am looking for a part that you have in store. That is part model no. 116220 D. I would like to know how much this part will cost me.I am looking forward for a reply.yours sincerly, Nando Semeleer.

—> Purchase or Repair:
#Advance Industries by Waarvik on 2009-03-09 23:11
Hello, I'm inquiring about the Advance Industries 116220 D 107243-0002 board. Can this be repaired or purchased as a replacement? I'm looking to address this as soon as possible. Thank you!

—> Purchase or Repair:
I noticed that the Advance Industries 116220 D 107243-0002 is experiencing an issue with the board. It seems like something has stopped working, but I'm not entirely sure what the specific problem is. I'll try to gather more information to provide a clearer picture of the situation.—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Raskar on 2009-11-10 01:23
Board 107243-0002 in Advanced Industries 116220 D just failed. Need to swap it out ASAP to keep the equipment running.

—> Purchase or Repair:
#Advance Industries by Manoj Bhandarkar on 2009-12-03 20:32
Hi there, I need repair info for Advance Industries 116220 D 107243-0002 board. Can you provide details ASAP? Thank you!

—> Purchase or Repair:
#Advance Industries by Robberechts Senne on 2009-11-11 23:30
The Advance Industries 116220 D 107243-0002 board malfunctioned mid-shift. Need follow-up during the day.

—> Purchase or Repair:
#Advance Industries by Lee Hodson on 2015-03-31 07:04
The Advance Industries 116220 D 107243-0002 Gate Control Board is not working.

—> Purchase or Repair:
Please contact me asap about my board repair, I thank it was shiped on friday, thats what i need to know. Thank you Bret Moore

—> Purchase or Repair:
#Advance Industries by bharat patel on 2009-05-25 12:22
Hello, Could you please provide repair information for a malfunctioning Advance Industries 116220 D 107243-0002 board? Any help would be greatly appreciated. Thank you.

—> Purchase or Repair:
#Advance Industries by ismael on 2014-02-19 07:19
The Advance Industries 116220 D 107243-0002 circuit board malfunctioned causing unexpected downtime earlier today around 1130 am. Need to resolve this issue before the next shift starts. Any insights or suggestions would be greatly appreciated.

—> Purchase or Repair:
#Advance Industries by CrurordVoxy on 2014-02-20 08:00
Experiencing issues with Advance Industries circuit board 116220 D 107243-0002, causing production downtime. Need repair service ASAP to get the industrial unit operational again.

—> Purchase or Repair:
#Advance Industries by Lebedev on 2014-12-18 09:44
Machine is not powering on.

—> Purchase or Repair:
#Advance Industries by Jarod Ballardo on 2009-05-29 07:06
The Advance Industries 116220 D 107243-0002 board is not working as per the shop.

—> Purchase or Repair:
#Advance Industries by aziz fayek aziz on 2009-10-20 12:32
Issue The Advance Industries 116220 D 107243-0002 board is not powering on.

—> Purchase or Repair:
#Advance Industries by Jerry Fields on 2011-05-12 15:21
I need to purchase 2 ea. Advance Industries Garage Door OpenersFCC ID: BSH8YN213

—> Purchase or Repair:
#Advance Industries by Joseph Snow on 2011-01-21 14:15
Need a manual for a 24 volt AC power door opener, in order to hook it up

—> Purchase or Repair:
#Advance Industries by j williams on 2005-12-28 08:12
Advance Industries 116220D 107243-0002 logic timer board malfunctioning, halting production line. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
I need assistance with Advance Industries part number 116220 D 107243-0002, which is a Gate Control Board. My client is experiencing issues with this board and we would like more information on possible repairs or replacements. Thank you.

—> Purchase or Repair:
#Advance Industries by tukaram on 2009-08-31 10:26
Hello, I am in need of repair info for an Advance Industries 116220 D 107243-0002 board. Can you please provide details on how to get this fixed? Thank you.
—> See more:

—> Purchase or Repair:
#Advance Industries by Charles Donnell on 2009-12-29 14:17
The Advance Industries 116220 D 107243-0002 board is currently not functioning. Please check it out as soon as possible. Thank you.

—> Purchase or Repair:
#Advance Industries by mangesh shanbhag on 2009-10-20 19:32
The Advance Industries 116220 D 107243-0002 board is not working as reported.

—> Purchase or Repair:
#Advance Industries by sazib on 2009-10-19 13:22
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair? Our unit is down and we need to keep production running.

—> Purchase or Repair:
#Advance Industries by Stanleycib on 2015-10-28 11:28
Hey, the Gate Control Board (116220 D 107243-0002) just failed. Need to replace it ASAP to get the machine back online.

—> Purchase or Repair:
#Advance Industries by Paco on 2009-12-19 18:47
The Advance Industries 116220 D 107243-0002 board is not working as reported.

—> Purchase or Repair:
#Advance Industries by J.Y. on 2009-10-14 20:43
The Advance Industries 116220 D 107243-0002 unit is still down. Please provide an update as soon as possible.

—> Purchase or Repair:
#Advance Industries by bahat on 2009-11-15 01:37
Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 board. Could you please let me know if it can be repaired or if a replacement can be purchased? I am trying to

—> Purchase or Repair:
#Advance Industries by art on 2009-03-10 21:11
I'm currently experiencing an issue with the Advance Industries 116220 D 107243-0002 machine. It appears that the board may not be functioning properly as something has stopped working. I will need assistance to diagnose and resolve this issue as soon as possible.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.