Advance Industries Service & Repair Forum

Advance Industries 116220-D 107243-0002 control board malfunctioning, affecting production line speed and accuracy. Immediate repair required to resume operations.

—> Purchase or Repair: Ticket Image

— Posted by Tchatchui on 2006-06-22

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Ron on 2009-08-21 11:38
Hello, I'm reaching out to inquire about repair information for an Advance Industries 116220 D 107243-0002 board that has stopped working. Could you provide details on how we can repair or replace it quickly? Thank you.

—> Purchase or Repair:
Hello, I'm reaching out to inquire about the Advance Industries 116220 D 107243-0002 board. We are looking to determine if this unit is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Advance Industries by Monroe Dodd on 2009-03-17 19:53
Hey, a unit went down mid-shift. Issue with Advance Industries 116220 D 107243-0002 board. Need to check and fix it ASAP.

—> Purchase or Repair:
#Advance Industries by Savoskin on 2009-11-25 04:52
Need help fixing Advance Industries 116220 D 107243-0002 board. We can't get it to power up, all lights remain off. Send someone ASAP. Thanks!

—> Purchase or Repair:
#Advance Industries by troy gowan on 2010-09-16 21:08
I have a overhead garage doors opener. model 100. I am looking for a replacment remot and reciverreciver number is 107224-0014

—> Purchase or Repair:
#Advance Industries by Paul Leland on 2009-07-02 00:20
We have the circuit board listed above in our gate operator and the manual timing wheel on the board seems to be eradic as I put it to min. and the gate stays open approx 9 minutes. Before I played with it today, the gate would stay all the way open for 1 1/2 seconds before closing.Any suggestions?—…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by virenderm mudgil on 2015-08-12 16:20
Could you please provide information on whether the Advance Industries 116220 D 107243-0002 Gate Control Board is still supported or if replacement parts are available?

—> Purchase or Repair:
The circuit board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need immediate repair service to resolve this issue and get the line running smoothly again.

—> Purchase or Repair:
#Advance Industries by Carmona on 2009-10-26 12:23
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair? Production is down and we need a replacement urgently. Thank you.

—> Purchase or Repair:
#Advance Industries by Larry Freeze on 2011-06-13 20:56
Would like information on the purchase of two remote units. The main door remote unit has lable #107224-0002. The other unit was run over by the car and is unavilable. Please send info on how to purchase replacable items . Thank you Larry Freeze 302 Guava Pl Brea, Ca. 92821f

—> Purchase or Repair:
#Advance Industries by Brian Chiddick on 2009-09-01 17:31
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by Strube on 2009-12-24 12:33
Do you have a board available for Advance Industries 116220 D 107243-0002? Our unit is down, and we need to keep production running.

—> Purchase or Repair:
#Advance Industries by Tchatchui on 2006-06-22 14:29
Advance Industries 116220-D 107243-0002 control board malfunctioning, affecting production line speed and accuracy. Immediate repair required to resume operations.

—> Purchase or Repair:
#Advance Industries by sumesh on 2009-07-19 20:15
Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 board. I was told to get this fixed or replaced, but I'm not sure what it does. Can this board be repaired or purchased as a replacement? I'm looking to check this off my to-do list. Thank you.

—> Purchase or Repair:
#Advance Industries by John D on 2020-08-30 20:28
I have an Overhead Garage Door Opener Model 100. I am looking for a replacement receiver P/N 107224-0014.

—> Purchase or Repair:
#Advance Industries by mohammed on 2009-06-26 13:28
The unit "Advance Industries 116220 D 107243-0002" is not functioning. Please have a look at it. Thank you.

—> Purchase or Repair:
#Advance Industries by lora linville on 2009-05-18 17:43
Hello, I am reaching out on behalf of a client who is in need of assistance with an Advance Industries 116220 D 107243-0002 board. They have indicated that there seems to be an issue with the board. Can you please provide information on potential repair options and cost estimates? Thank you.—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Manoj Bhandarkar on 2009-12-03 20:32
Hi there, I need repair info for Advance Industries 116220 D 107243-0002 board. Can you provide details ASAP? Thank you!

—> Purchase or Repair:
#Advance Industries by atilla on 2009-06-23 01:10
Hello, I am interested in purchasing the Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are in urgent need of sourcing one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Donald Fellwock on 2009-02-07 12:25
The Advance Industries 116220 D 107243-0002 board malfunctioned today during the afternoon shift, causing significant downtime. Can you please provide a quick explanation of what might have caused the issue before the next shift begins? Thank you.

—> Purchase or Repair:
#Advance Industries by Sabin on 2009-11-23 23:58
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse. Please provide a description of the abnormal actions you are observing.

—> Purchase or Repair:
#Advance Industries by JORGE TALERO on 2009-05-25 01:00
Hello, I'm reaching out regarding the Advance Industries 116220 D 107243-0002 board. I was instructed to either repair or replace it, but I'm uncertain of its function. Could you please advise if this item can be repaired or if a new one needs to be purchased? I'm aiming to

—> Purchase or Repair:
#Advance Industries by Jose Diaz on 2006-11-08 22:57
The control board on our Advance Industries 116220-D 107243-0002 is malfunctioning, causing a production line halt. We need urgent repair service to address this issue and resume operations

—> Purchase or Repair:
#Advance Industries by Luis Raul Godinez on 2006-11-16 11:57
The Advance Industries 116220-D 107243-0002 is a control board unit that is not functioning.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board just failed on machine 5. Need to replace ASAP to avoid downtime.

—> Purchase or Repair:
#Advance Industries by JIM on 2008-10-01 19:53
COULD YOU POINT ME IN THE RIGHT DIRECTION FOR A MANUAL FOR A 116220D? I;M TRYING TO DISABLE THE TIMER OR ADD PHOTO EYES.

—> Purchase or Repair:
#Advance Industries by danny morales on 2012-04-04 04:00
I have this board in my gate opener and trying to find out how to hook up a coaxial receiver and a owners manual thank you

—> Purchase or Repair:
#Advance Industries by Raskar on 2009-11-10 01:23
Board 107243-0002 in Advanced Industries 116220 D just failed. Need to swap it out ASAP to keep the equipment running.

—> Purchase or Repair:
#Advance Industries by Cecilia Lobos on 2009-11-09 13:40
Hello, I hope this message finds you well. I am inquiring about the Advance Industries 116220 D 107243-0002 board. I would like to know if it is possible to have it repaired or if a replacement can be purchased. I am trying to

—> Purchase or Repair:
#Advance Industries by Annadurdiev on 2009-10-11 14:22
The Advance Industries 116220 D 107243-0002 unit is currently down. Maintenance team has been notified.

—> Purchase or Repair:
#Advance Industries by Ziganay on 2009-07-08 06:22
Hello, my Advance Industries 116220 D 107243-0002 board is malfunctioning and in need of repairs. Looking for a technician to help resolve the issue quickly.

—> Purchase or Repair:
#Advance Industries by daniele on 2009-11-29 14:19
I've noticed that the Advance Industries 116220 D 107243-0002 is experiencing issues seems like something stopped working on the board. It may require further inspection to determine the exact problem.

—> Purchase or Repair:
#Advance Industries by Ethan on 2009-11-20 19:54
The board on our Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in our production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
#Advance Industries by Pertijs on 2009-11-24 18:15
We experienced unexpected downtime with the Advance Industries 116220 D 107243-0002 board last night at 1000 pm. Please investigate and provide feedback urgently.

—> Purchase or Repair:
#Advance Industries by fodewhondople on 2009-11-15 03:37
The Advance Industries 116220 D 107243-0002 unit is still down. Please reply and update me on the status.

—> Purchase or Repair:
#Advance Industries by Rajneesh on 2009-01-24 03:59
The Advance Industries 116220 D 107243-0002 board is showing error code E23 and is not responding to any commands. Need urgent assistance to troubleshoot and fix the issue. Thank you.

—> Purchase or Repair:
#Advance Industries by Weir on 2009-09-02 19:21
Please prioritize addressing the malfunction on the Advance Industries 116220 D 107243-0002 board as it's significantly impacting our production line. Your urgent attention to this matter is required to resume operations

—> Purchase or Repair:
#Advance Industries by Bobby Moses jr on 2014-02-14 23:58
Can the Advance Industries 116220 D 107243-0002 circuit board be repaired or bought? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board is not working. That's all we know from the shop.

—> Purchase or Repair:
#Advance Industries by jorge Enriquez on 2015-07-20 23:20
Gate Control Board on Advance Industries 116220 D 107243-0002 just failed. Need replacement ASAP to resume operations.

—> Purchase or Repair:
#Advance Industries by Clarence Wilson on 2009-01-31 00:29
The Advance Industries 116220 D 107243-0002 board is malfunctioning. Maintenance team needs assistance to address the issue.

—> Purchase or Repair:
#Advance Industries by manny on 2005-12-21 00:47
Logic timer board in Advance Industries 116220D 107243-0002 is malfunctioning, halting production line. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by Dennis McCollums on 2009-11-19 17:31
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse.

—> Purchase or Repair:
#Advance Industries by Lee gregory on 2009-07-23 18:55
Hello, we are in need of repair information for an Advance Industries 116220 D 107243-0002 board. Can you please provide details on how to fix or replace it? Thank you.

—> Purchase or Repair:
#Advance Industries by Stacey on 2014-10-17 16:03
Machine 116220 D 107243-0002 is not booting up, displaying "Error Code 34".

—> Purchase or Repair:
#Advance Industries by mark casey on 2012-06-07 20:32
I have manual for this oard if you still need it

—> Purchase or Repair:
#Advance Industries by Babur on 2009-11-19 16:31
Machine not powering up.

—> Purchase or Repair:
#Advance Industries by Luley on 2009-05-17 18:18
Drive or board failure on Advance Industries 116220 D 107243-0002. Need immediate attention to prevent downtime.

—> Purchase or Repair:
#Advance Industries by coflienoblofs on 2009-12-03 23:32
the Advance Industries 116220 D 107243-0002 board went down mid-shift. Needs checking first thing in the AM. - Night shift team

—> Purchase or Repair:
#Advance Industries by Susnjevic on 2009-07-28 15:42
I'm currently facing an issue with the Advance Industries 116220 D 107243-0002. It seems like there's a problem with the board, causing the machine to stop working properly. I will need to investigate further to determine the exact nature of the issue.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.