Mirtone Service & Repair Forum

We have a mirtone EC200 installed in a 36 unit Sr. Care complex with standard call switches in each unit and a call light outside the entry door on the exterior of each unit. The system is powered with a 24VAC transformer. We would like to replace the outdoor lights with a Horn/Strobe combination unit to provide for better indication of the call request for emergency personnel. QUESTION: Can we replace the 24VAC transformer with a 24VDC power supply so that we can use 24VDC horn/strobes on the exterior of the buildings? All field wiring would be compatible with this but I wasn\'t sure if the EC200 would operate on a DC supply. 24VDC Horn/strobes are readily available but 24VAC ones (especially when they have to be weatherproof too) are extremely hard to find and are very expensive. Any input would be appreciated.

—> Purchase or Repair: Ticket Image

— Posted by Dan - North Coast Refrigeration & Electric, Inc on 2010-07-12

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Mirtone"

If you need your Mirtone unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 89 Comments

#Mirtone by William Arndt on 2010-08-06 08:33
Could you please provide me with pricing and availability information for the Mirtone 79045-2 Alarm Board? I am looking to source one quickly and would appreciate your assistance. Thank you.

—> Purchase or Repair:
#Mirtone by yann bedu on 2010-03-19 21:27
Mirtone 79045-2 Alarm Board is malfunctioning, urgently requires repair to resume production. Requesting immediate attention to minimize downtime.

—> Purchase or Repair:
#Mirtone by Jack McCUrdy on 2013-09-11 12:28
Unit 25412275rev7 (Mirtone 79044) zone board is malfunctioning. Needs attention ASAP. Please check and reset during AM shift.

—> Purchase or Repair:
#Mirtone by Mr. M.R. THIAGARAJAN on 2010-09-19 22:22
The Mirtone 79045-2 alarm board in location XYZ is acting erratically. It is displaying unusual behavior that is not typical of its regular functioning.

—> Purchase or Repair:
#Mirtone by denton on 2013-07-25 00:32
Hello, the Mirtone 79044 Zone Board is displaying error code ER345. The alarm is continuously sounding, and all zones are appearing as inactive. Urgent assistance is required to troubleshoot and resolve this issue

—> Purchase or Repair:
#Mirtone by andrisol on 2010-02-16 14:51
The Mirtone 79045-2 alarm board is not working.

—> Purchase or Repair:
#Mirtone by BLEVINS on 2010-02-03 23:36
Hello, I am reaching out to inquire about the Mirtone 79045-2 alarm board. Our team is looking for information on whether this unit is still supported or if replacement parts are available. Could you please provide details on the current status of this product? Thank you.

—> Purchase or Repair:
#Mirtone by lalji on 2013-08-08 19:32
I am following up once again regarding the Mirtone 749044 25412275rev7 Zone Board issue. The unit is still down. Please provide an update at your earliest convenience.

—> Purchase or Repair:
#Mirtone by Stamper on 2010-12-14 16:55
The Mirtone 79045-2 alarm board experienced a malfunction today, causing downtime in the unit. This occurred at 1130 AM. Can you provide a quick explanation for what happened before the next shift arrives?

—> Purchase or Repair:
#Mirtone by Ankur Patel on 2010-11-28 23:11
Having issues with the Mirtone 79045-2 Alarm Board. Need a repair technician to check and fix the industrial unit. Please respond if you can help.

—> Purchase or Repair:
#Mirtone by tim stokolosa on 2009-01-17 14:06
My customer has an 8 floor.20 suite/floor mirtone system with pull stations in all suites.each suite is decoded in the mirtone on each floor and then on the first and second floor there are two master stations to decode the floor number. The system is only local to the caretaker.The owners want all …Purchase or Repair: Ticket Image...
Show More
#Mirtone by Basheer on 2013-03-16 22:15
Need repair for Mirtone 79044 25412275rev7 Zone Board. Not functioning, looking for technician to fix industrial unit

—> Purchase or Repair:
#Mirtone by Jesus Maldonado on 2013-06-25 12:36
the Mirtone 79044 25412275rev7 zone board on unit XYZ went down mid-shift. Please check it out and get it back up and running. Thanks!

—> Purchase or Repair:
#Mirtone by bruneau on 2013-07-17 06:44
Mirtone 749044 25412275rev7 Zone Board not responding.

—> Purchase or Repair:
#Mirtone by Barry Kater on 2008-02-19 00:23
I am repairing a door lock at an apartment block showing these symptoms.A transformer feeding the MA-485 is outputting 19.25 volts...will this harm the unit.It is a 16 volt amplifier.B when an apartment station depresses the door button the output at the amplifier terminals for the ac door reads 19.…Purchase or Repair: Ticket Image...
Show More
#Mirtone by street on 2010-09-29 21:17
The Mirtone 79045-2 alarm board is malfunctioning, causing delays in production. Immediate repair service is needed to avoid further disruption to the production line. Please address this issue urgently.

—> Purchase or Repair:
#Mirtone by sabahattin YILMAZ on 2013-08-13 13:32
Could you please verify if the Mirtone 79044 25412275rev7 Zone Board is still supported by the manufacturer or if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#Mirtone by Chairully on 2013-08-06 02:32
Our Mirtone 749044 25412275rev7 Zone Board stopped working. Need a replacement but can't find one. Please provide repair info asap. Thank you!

—> Purchase or Repair:
#Mirtone by Maryellen Kucera on 2013-06-11 17:43
Do you have a Mirtone 749044 25412275rev7 Zone Board available for sale or repair? Need to get production back up quickly.

—> Purchase or Repair:
#Mirtone by Jimmy Alexander on 2010-08-21 20:30
Hello, I'm interested in purchasing a Mirtone 79045-2 Alarm Board. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Mirtone by Patrick Blade on 2010-01-21 21:49
Can the Mirtone 79045-2 Alarm Board be repaired or purchased? I'm looking to check this off my to-do list. Thank you!

—> Purchase or Repair:
#Mirtone by Molauploady on 2013-07-15 23:44
The Mirtone 79044 25412275rev7 Zone Board is malfunctioning, causing a production line disruption. Immediate repair and restoration are critical to resume operations swiftly.

—> Purchase or Repair:
#Mirtone by Sghedoni Giorgio on 2010-08-18 08:40
Could you please confirm if the Mirtone 79045-2 Alarm Board is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:
#Mirtone by Faisal Riaz on 2013-06-28 01:23
The maintenance team reported an issue with the Mirtone 79044 25412275rev7 Zone Board. They need assistance troubleshooting it.

—> Purchase or Repair:
#Mirtone by Hassan Nab on 2010-06-15 08:05
the Mirtone 79045-2 alarm board went down mid-shift. Please have someone check it out first thing in the morning. Thanks!

—> Purchase or Repair:
#Mirtone by Graficas Dimensión on 2013-02-13 00:00
Can the Mirtone 79044 board be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Mirtone by Jonkman on 2013-07-25 16:32
I'm experiencing some issues with the Mirtone 749044 25412275rev7 Zone Board... something seems to have stopped working.

—> Purchase or Repair:
#Mirtone by jarvis on 2013-07-14 08:57
Could you please confirm if the Mirtone 749044 25412275rev7 Zone Board is still supported or if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#Mirtone by Construction on 2013-08-16 14:32
Mirtone 79044 25412275rev7 Zone Board not powering on, halting production.

—> Purchase or Repair:
#Mirtone by Brian Martin on 2013-07-16 04:44
The maintenance team reported that the Mirtone 79044 25412275rev7 Zone Board is not functioning.

—> Purchase or Repair:
#Mirtone by Yoshihiro Kawazoe on 2013-08-20 12:32
Hello, I hope this message finds you well. We are looking for information regarding the Mirtone 749044 25412275rev7 Zone Board. Could you please confirm if this unit is still supported or if there are replacement parts available for it? Thank you.

—> Purchase or Repair:
#Mirtone by vargas on 2013-07-26 05:32
The Mirtone 79044 25412275rev7 Zone Board is malfunctioning, leading to a disruption in our production line. Immediate repair or replacement is necessary to resume operations

—> Purchase or Repair:
#Mirtone by Ubaid on 2013-12-23 04:37
The Mirtone 749044 25412275rev7 Zone Board is displaying Error Code E13 and not detecting any input from Zone 3. Need urgent service to troubleshoot and resolve the issue.

—> Purchase or Repair:
#Mirtone by Branko Colic on 2010-11-18 02:17
Mirtone 79045-2 alarm board not responding, preventing production restart.

—> Purchase or Repair:
#Mirtone by andré desjardins on 2008-08-06 21:37
hello we did renovation and we broke a wire now we need the sqematic for it thank you

—> Purchase or Repair:
#Mirtone by Vlade on 2013-05-25 10:24
Mirtone 79044 25412275rev7 Zone Board is not functioning, production is offline.

—> Purchase or Repair:
#Mirtone by Kevin Hughes on 2013-11-26 23:04
Do you have a Mirtone 79044 25412275rev7 Zone Board available for sale or repair? We need to keep production running.

—> Purchase or Repair:
#Mirtone by Lorena Reyes on 2010-11-18 13:17
My Mirtone 79045-2 alarm board is malfunctioning, and I need a technician to repair it

—> Purchase or Repair:
#Mirtone by Toan on 2010-03-02 23:31
Hey, just a heads up, we've got a failed drive or board on Mirtone 79045-2 in need of your attention ASAP. Keep me posted.

—> Purchase or Repair:
#Mirtone by Thoma on 2013-03-25 04:32
Mirtone 79044 25412275rev7 Zone Board not powering up.

—> Purchase or Repair:
#Mirtone by Coletta on 2013-10-19 01:00
Could you please confirm if the Mirtone 79044 25412275rev7 Zone Board is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:
We have a mirtone EC200 installed in a 36 unit Sr. Care complex with standard call switches in each unit and a call light outside the entry door on the exterior of each unit. The system is powered with a 24VAC transformer. We would like to replace the outdoor lights with a Horn/Strobe combination un…Purchase or Repair: Ticket Image...
Show More
#Mirtone by R.Jim White/WSM on 2007-05-08 23:21
Hi...I have one customer with no voltage to the door striker but have confirmed the striker works. Transformer is ok! Do you have the parts for this, relay etc to ship so I can repair it or do you have a re-conditioned unit for sale. The seniors in thecomplex want it yesterday..Can you help?R.Jim Wh…Purchase or Repair: Ticket Image...
Show More
#Mirtone by Travis Brown on 2019-09-20 18:15
The Mirtone 71269F fire alarm panel unit isn't functioning. Maintenance team needs to check it.

—> Purchase or Repair:
#Mirtone by nelson dominguez on 2010-01-13 15:59
I require of support and that contacts a distributor to me of mirtone in the city of Mexico thanks

—> Purchase or Repair:
#Mirtone by Relivosse on 2013-02-13 19:06
The Mirtone 79044 25412275rev7 Zone Board in the warehouse is exhibiting unusual behavior, deviating from its normal operations.

—> Purchase or Repair:
#Mirtone by Badut Ancol on 2013-08-11 16:35
The Mirtone 79044 25412275rev7 Zone Board in the warehouse is not functioning as expected. It is exhibiting unusual behavior and not operating normally.

—> Purchase or Repair:
#Mirtone by bethel graphics on 2013-05-16 19:54
The Mirtone 749044 25412275rev7 Zone Board in the warehouse is not functioning as usual. It is displaying unusual behavior, but I am not certain what the specific issue is.

—> Purchase or Repair:
#Mirtone by darren kotzur on 2008-02-16 00:00
Mir-tone Assy. 72024100 motherboard not powering up, no lights or display. Need repair service ASAP.

—> Purchase or Repair:
#Mirtone by Jim Rap on 2010-10-31 09:43
Hello, I am inquiring about a Mirtone 79045-2 Alarm Board that needs repair. Can you please provide information on the repair process and cost estimate for this specific part? Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.