Advance Industries Service & Repair Forum

Hi,I am in desparate need of a wiring diagram for an Advance industries 116220D board for a Mckinney Electronics operator. We need to add a reflective detector and the board we have does not have a labelled terminal block. We would appreciate any information you might have.Thanks,DeeAnne

—> Purchase or Repair: Ticket Image

— Posted by DeeAnne on 2005-08-30

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Jacky on 2009-03-29 04:00
I would like to inquire if you have an Advance Industries 116220 D 107243-0002 board available for purchase or repair. Thank you.

—> Purchase or Repair:
#Advance Industries by NOE VALADEZ on 2009-09-24 02:07
Could you please provide details on repair services and estimated costs for Advance Industries 116220 D 107243-0002 board in need of service? Thank you.

—> Purchase or Repair:
#Advance Industries by Derek Baker on 2014-04-02 00:07
The circuit board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a production line disruption. Urgent repair service needed to rectify the issue

—> Purchase or Repair:
#Advance Industries by Lebedev on 2014-12-18 09:44
Machine is not powering on.

—> Purchase or Repair:
#Advance Industries by Nash on 2015-07-25 03:20
The Advance Industries 116220 D 107243-0002 Gate Control Board is displaying error code E203 and the gate is not responding to any commands. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by Sandra Contreras on 2009-12-11 02:24
Hello, I hope you're doing well. I was asked to get the Advance Industries 116220 D 107243-0002 board fixed or replaced. Before making a decision, may I know if it's possible to repair this board or if it needs to be purchased new? I'm trying to get this resolved as soon as possible. Thank you for y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Magaly Polo A. on 2009-11-16 16:58
The Advance Industries 116220 D 107243-0002 board is behaving unusually. It is not functioning as it normally does, exhibiting strange behavior.

—> Purchase or Repair:
#Advance Industries by lora linville on 2009-05-18 17:43
Hello, I am reaching out on behalf of a client who is in need of assistance with an Advance Industries 116220 D 107243-0002 board. They have indicated that there seems to be an issue with the board. Can you please provide information on potential repair options and cost estimates? Thank you.—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Lee Hodson on 2015-03-31 07:04
The Advance Industries 116220 D 107243-0002 Gate Control Board is not working.

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-03-28 13:52
Can you tell me if it is possible to get a replacement remote for a Touch n Go remote I purchaced in 1985. It is coded 390-19. there is an antenna model 702, ser#751015 if that helps. also the door opener is a model R80-az. Thank you

—> Purchase or Repair:
#Advance Industries by Cherrington on 2015-08-10 00:20
Hello, our Advance Industries 116220 D 107243-0002 Gate Control Board is displaying error code E05 and the gate is not responding to any commands. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by Reichling on 2009-12-03 08:09
The Advance Industries 116220 D 107243-0002 is malfunctioning. It is a board unit, but I'm not entirely sure about its function.

—> Purchase or Repair:
#Advance Industries by Curran on 2009-09-14 12:12
Looking for repair for an Advance Industries 116220 D 107243-0002 board. Unit not functioning, need a technician ASAP.

—> Purchase or Repair:
I'm following up again about the Advance Industries 116220 D 107243-0002 board. The unit is still down. Please provide an update

—> Purchase or Repair:
#Advance Industries by Laura Phipps on 2009-03-09 20:11
My Advance Industries 116220 D 107243-0002 board is not functioning properly and needs repair as soon as possible to prevent any production delays. Looking for a skilled technician who can troubleshoot and fix the issue

—> Purchase or Repair:
#Advance Industries by Malcolm on 2009-05-26 15:51
Hello, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. I'd like to inquire about pricing and availability as I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Genoa on 2015-07-25 09:20
Hello, I'm inquiring about part number 116220 D 107243-0002, which is a Gate Control Board for Advance Industries. My client is experiencing some issues with this particular part and would like to get more information on repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by Corey love on 2009-03-11 04:11
Could you please provide me with pricing and availability details for the Advance Industries 116220 D 107243-0002 board? I am looking to source one quickly and would appreciate your

—> Purchase or Repair:
#Advance Industries by dennis yost on 2013-12-27 15:43
i need to replace 1 black box for a horton opener brand name - Horton easy access number on the board inside box - 107846-0001 Freq - 360 Mfg - 92 48 Fcc Id: BSH8YN107846Unable to find item on Google or EbayIs it still available? thanks dennis

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-03-22 13:15
I have a touch n\'go remote garage door opener (390-19 mhz) for my overhead door garage opener and it works fine. I would love to get another one. I believe this has a date of 1985 on it and don\'t know if these are still possible to get. Any help? Thank yo

—> Purchase or Repair:
#Advance Industries by danny morales on 2012-04-04 04:00
I have this board in my gate opener and trying to find out how to hook up a coaxial receiver and a owners manual thank you

—> Purchase or Repair:
#Advance Industries by Thanh on 2009-09-10 02:15
Hi there, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you confirm the pricing and availability for this model? My team recommended reaching out as we are looking to source one quickly. Thank you!

—> Purchase or Repair:
#Advance Industries by atilla on 2009-06-23 01:10
Hello, I am interested in purchasing the Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are in urgent need of sourcing one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by art on 2009-03-10 21:11
I'm currently experiencing an issue with the Advance Industries 116220 D 107243-0002 machine. It appears that the board may not be functioning properly as something has stopped working. I will need assistance to diagnose and resolve this issue as soon as possible.

—> Purchase or Repair:
#Advance Industries by Mike Johnson on 2009-08-04 11:48
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a production line stoppage. Please address this issue urgently to resume operations.

—> Purchase or Repair:
#Advance Industries by furqan on 2009-12-07 14:18
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in our warehouse. It is not performing its usual functions.

—> Purchase or Repair:
#Advance Industries by Cecilia Lobos on 2009-11-09 13:40
Hello, I hope this message finds you well. I am inquiring about the Advance Industries 116220 D 107243-0002 board. I would like to know if it is possible to have it repaired or if a replacement can be purchased. I am trying to

—> Purchase or Repair:
#Advance Industries by wiley on 2009-11-17 19:47
Hello, I'm inquiring about the Advance Industries 116220 D 107243-0002 board. Can this item be repaired or replaced? I'm trying to get this sorted as soon as possible. Thank you!

—> Purchase or Repair:
#Advance Industries by Paul Leland on 2009-07-02 00:20
We have the circuit board listed above in our gate operator and the manual timing wheel on the board seems to be eradic as I put it to min. and the gate stays open approx 9 minutes. Before I played with it today, the gate would stay all the way open for 1 1/2 seconds before closing.Any suggestions?—…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Gustavo Gil on 2009-07-29 01:00
The Advance Industries 116220 D 107243-0002 board is showing error code E102. Equipment is not powering up despite multiple restart attempts. Please advise.

—> Purchase or Repair:
#Advance Industries by Marques Cedric on 2014-12-16 22:44
Equipment ID Advance Industries 116220 D 107243-0002Issue Machine not powering up, displaying Error Code 302. Investigation needed ASAP. Please advise on next steps.

—> Purchase or Repair:
#Advance Industries by Carolyn McCrary on 2009-12-14 06:48
"Unit 116220 D 107243-0002 board failure during night shift. Needs attention ASAP. - Maintenance Crew"

—> Purchase or Repair:
#Advance Industries by Temitope Egunjobi on 2014-11-28 17:16
The Advance Industries 116220 D 107243-0002 unit is currently not functioning. Maintenance team is aware and investigating the issue.

—> Purchase or Repair:
#Advance Industries by Gaudette on 2009-07-13 09:11
I'm experiencing a problem with the Advance Industries 116220 D 107243-0002 - it seems like the board is malfunctioning. I'm not entirely sure what this model does, but something has definitely stopped working.

—> Purchase or Repair:
#Advance Industries by Lind on 2014-05-03 05:20
Advance Industries 116220 D 107243-0002 experiencing extensive circuit board failures disrupting production line. Urgent repair service needed to restore operations ASAP.

—> Purchase or Repair:
#Advance Industries by McSpadden on 2009-11-17 20:23
I'm sorry, but something seems to be off with the Advance Industries 116220 D 107243-0002 board. It appears to have stopped working properly.

—> Purchase or Repair:
#Advance Industries by Dennis McCollums on 2009-11-19 17:31
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse.

—> Purchase or Repair:
#Advance Industries by Waarvik on 2009-03-09 23:11
Hello, I'm inquiring about the Advance Industries 116220 D 107243-0002 board. Can this be repaired or purchased as a replacement? I'm looking to address this as soon as possible. Thank you!

—> Purchase or Repair:
#Advance Industries by nagarajan.g on 2009-03-09 12:11
Board on Advance Industries 116220 D 107243-0002 malfunctioned, needs immediate attention. Will investigate further and report back soon.

—> Purchase or Repair:
#Advance Industries by said benhamad on 2009-11-16 22:17
Hello, we have a faulty board (Advance Industries 116220 D 107243-0002) that needs to be repaired or replaced. Can you please provide us with repair information as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by Aldo G. Quilang on 2009-05-02 02:09
Hello, I am interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Dumangas on 2009-03-18 01:00
I'm facing a problem with the Advance Industries 116220 D 107243-0002 board. It seems that something has stopped working, but I'm not exactly sure what the issue is. I will need to investigate further to determine the cause of the malfunction.

—> Purchase or Repair:
#Advance Industries by Savoskin on 2009-11-25 04:52
Need help fixing Advance Industries 116220 D 107243-0002 board. We can't get it to power up, all lights remain off. Send someone ASAP. Thanks!

—> Purchase or Repair:
#Advance Industries by Erdeljac on 2009-11-06 02:18
Hello, I'm reaching out for repair info on an Advance Industries 116220 D 107243-0002 board that stopped working. Can you provide details on where and how it can be repaired? Thanks.

—> Purchase or Repair:
#Advance Industries by Josue Canaves on 2009-03-09 15:11
Advance Industries 116220 D 107243-0002 is showing error code E005 and is not responding to touch commands. Please advise on possible troubleshooting steps. Thank you.

—> Purchase or Repair:
#Advance Industries by DeeAnne on 2005-08-30 23:03
Hi,I am in desparate need of a wiring diagram for an Advance industries 116220D board for a Mckinney Electronics operator. We need to add a reflective detector and the board we have does not have a labelled terminal block. We would appreciate any information you might have.Thanks,DeeAnne—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Chu on 2009-02-23 05:06
Hello, I represent a client who is experiencing some issues with an Advance Industries 116220 D 107243-0002 board. Could you please provide some information on potential repair options and costs for this specific part?Thank you.

—> Purchase or Repair:
Please contact me asap about my board repair, I thank it was shiped on friday, thats what i need to know. Thank you Bret Moore

—> Purchase or Repair:
#Advance Industries by vu on 2009-12-31 18:48
Hello, I hope this message finds you well. I am reaching out regarding the Advance Industries 116220 D 107243-0002 board. Our team is looking to locate a replacement or repair option for this unit. Since it is older and we are unsure of the manufacturer, could you please confirm if this unit is stil…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Sylvia laoutas on 2009-03-10 23:11
The unit Advance Industries 116220 D 107243-0002 is exhibiting abnormal behavior in the warehouse. It is not functioning as usual, acting strangely.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.