Advance Industries Service & Repair Forum

Hello, I'm inquiring about the Advance Industries 116220 D 107243-0002 board. Can this be repaired or purchased as a replacement? I'm looking to address this as soon as possible. Thank you!

—> Purchase or Repair: Ticket Image

— Posted by Waarvik on 2009-03-09

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Sandra Contreras on 2009-12-11 02:24
Hello, I hope you're doing well. I was asked to get the Advance Industries 116220 D 107243-0002 board fixed or replaced. Before making a decision, may I know if it's possible to repair this board or if it needs to be purchased new? I'm trying to get this resolved as soon as possible. Thank you for y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by ADNAN HRNJIC on 2014-02-12 18:58
Hi there! Just wanted to bring to your attention that the Advance Industries 116220 D 107243-0002 circuit board malfunctioned earlier today at 330 PM, causing downtime for the production line. Could you please provide insights on what might have caused the issue? Thank you!

—> Purchase or Repair:
#Advance Industries by chris corey on 2016-02-17 20:03
im looking to replace a bsh8yn229 remote

—> Purchase or Repair:
#Advance Industries by sutrisno on 2015-07-24 14:43
The Advance Industries 116220 D 107243-0002 Gate Control Board is not working properly.

—> Purchase or Repair:
#Advance Industries by Juergen.Arpe on 2009-12-29 13:17
I've noticed an issue with the Advance Industries 116220 D 107243-0002. It seems like something on the board has stopped working, but I'm not entirely sure what it does. I will report it to the appropriate department for further investigation.

—> Purchase or Repair:
#Advance Industries by Brian Sutherland on 2009-12-11 01:24
I have an Advance Industries 116220 D 107243-0002 board that is not functioning properly. Looking for a repair service to fix it

—> Purchase or Repair:
#Advance Industries by wiley on 2009-11-17 19:47
Hello, I'm inquiring about the Advance Industries 116220 D 107243-0002 board. Can this item be repaired or replaced? I'm trying to get this sorted as soon as possible. Thank you!

—> Purchase or Repair:
#Advance Industries by john.gilmore on 2011-10-31 13:04
I purchased a house with a garage door opener made by advance industries . The remote will only work if you have direct line of site with opener. I have put in fresh batteries. It appears to be very old.Any suggestions would be appreciated.Thanks

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-03-28 13:52
Can you tell me if it is possible to get a replacement remote for a Touch n Go remote I purchaced in 1985. It is coded 390-19. there is an antenna model 702, ser#751015 if that helps. also the door opener is a model R80-az. Thank you

—> Purchase or Repair:
#Advance Industries by Josef on 2009-11-12 04:34
Hello, do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit is down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by Lee Hodson on 2015-03-31 07:04
The Advance Industries 116220 D 107243-0002 Gate Control Board is not working.

—> Purchase or Repair:
I need assistance with Advance Industries part number 116220 D 107243-0002, which is a Gate Control Board. My client is experiencing issues with this board and we would like more information on possible repairs or replacements. Thank you.

—> Purchase or Repair:
#Advance Industries by Samuel Morales on 2009-04-04 08:42
The Advance Industries 116220 D 107243-0002 board is not powering on, hindering production.

—> Purchase or Repair:
#Advance Industries by Jerry Fields on 2011-05-12 15:21
I need to purchase 2 ea. Advance Industries Garage Door OpenersFCC ID: BSH8YN213

—> Purchase or Repair:
#Advance Industries by Derek Baker on 2014-04-02 00:07
The circuit board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a production line disruption. Urgent repair service needed to rectify the issue

—> Purchase or Repair:
#Advance Industries by khulaif abdullah on 2009-08-30 23:06
The Advance Industries 116220 D 107243-0002 board is not working. — See more:

—> Purchase or Repair:
#Advance Industries by niaraki on 2009-12-26 10:17
The unit isn't working, please investigate.

—> Purchase or Repair:
#Advance Industries by Malcolm on 2009-05-26 15:51
Hello, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. I'd like to inquire about pricing and availability as I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Rudy Martens on 2009-12-17 22:53
Machine displaying error code X32 upon startup.

—> Purchase or Repair:
#Advance Industries by Clarence Wilson on 2009-01-31 00:29
The Advance Industries 116220 D 107243-0002 board is malfunctioning. Maintenance team needs assistance to address the issue.

—> Purchase or Repair:
#Advance Industries by PARDI on 2009-02-13 13:46
the Advance Industries 116220 D board in unit 107243-0002 went down mid-shift. Please check it out and troubleshoot in the morning. Thanks!

—> Purchase or Repair:
#Advance Industries by ODonovan on 2009-11-09 14:40
Hi there, I am reaching out on behalf of our client regarding part number 116220 D 107243-0002, which involves a board issue. Can you please provide more information on the repair process and estimated cost? Thank you.

—> Purchase or Repair:
#Advance Industries by j williams on 2005-12-28 08:12
Advance Industries 116220D 107243-0002 logic timer board malfunctioning, halting production line. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by Ostermann on 2009-06-24 14:44
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by CHE on 2009-10-18 17:47
I'm experiencing some issues with the Advance Industries 116220 D 107243-0002. It seems like there might be a problem with the board, as something has stopped working. I'll make sure to get this checked out and fixed as soon as possible.

—> Purchase or Repair:
#Advance Industries by ENGLISH on 2009-03-11 18:11
The Advance Industries 116220 D 107243-0002 board is not functioning properly. Please address the issue

—> Purchase or Repair:
#Advance Industries by HOWAR on 2009-06-08 11:55
Could you kindly confirm if the Advance Industries 116220 D 107243-0002 board is still supported, and if there are replacement parts available for this unit? Thank you.

—> Purchase or Repair:
#Advance Industries by monty clifcorn on 2014-09-23 23:23
The tag over three box relays says MFD. ADVANCE INDUSTRIES, APPLETON, WIS. with the controller model no. tagged on the circuit board. I may need a new board or repair to the board. One of the relays continues a slow click as long as the opener is plugged in to power. Please advise. Thanks.—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Babur on 2009-11-19 16:31
Machine not powering up.

—> Purchase or Repair:
#Advance Industries by GEORGE SUTTON on 2009-02-23 12:04
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior - it is not functioning as it normally does.

—> Purchase or Repair:
#Advance Industries by farag on 2009-11-09 16:40
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse. The unit is not functioning as expected, behaving strangely.

—> Purchase or Repair:
#Advance Industries by Jose Diaz on 2006-11-08 22:57
The control board on our Advance Industries 116220-D 107243-0002 is malfunctioning, causing a production line halt. We need urgent repair service to address this issue and resume operations

—> Purchase or Repair:
#Advance Industries by Rodrigo Avendano on 2009-08-17 16:02
Can you please provide information on repairs for Advance Industries 116220 D 107243-0002 board? The client is experiencing issues and needs guidance.

—> Purchase or Repair:
#Advance Industries by orru on 2009-07-18 12:38
Board on Advance Industries 116220 D 107243-0002 malfunctioning. Urgent repair needed to resume production. Line stoppage impacting output. Address immediately to avoid further delays.

—> Purchase or Repair:
#Advance Industries by Nash on 2015-07-25 03:20
The Advance Industries 116220 D 107243-0002 Gate Control Board is displaying error code E203 and the gate is not responding to any commands. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by Golub on 2009-10-22 20:59
Advance Industries 116220 D 107243-0002 is down with Error Code E12 indicating a board issue. Please advise on next steps for repair. Thank you.

—> Purchase or Repair:
#Advance Industries by MesusantAnges on 2009-12-29 10:17
Equipment 116220 D 107243-0002 is down. Error code 005 blinking red on display. Unable to power on or operate. Please advise on next steps. Thank you.

—> Purchase or Repair:
I'm working with Advance Industries 116220 D 107243-0002, and the board seems to be the issue. The equipment is down, and I'm not sure why. No error code is displaying. Please advise on next steps to troubleshoot.

—> Purchase or Repair:
#Advance Industries by bekZitteeGeom on 2006-04-11 19:35
The control board on the Advance Industries 116220-D 107243-0002 is malfunctioning, causing a significant disruption to the production line. Immediate repair or replacement is necessary to resume operations without further delay.

—> Purchase or Repair:
#Advance Industries by Strube on 2009-12-24 12:33
Do you have a board available for Advance Industries 116220 D 107243-0002? Our unit is down, and we need to keep production running.

—> Purchase or Repair:
#Advance Industries by mohammed on 2009-06-26 13:28
The unit "Advance Industries 116220 D 107243-0002" is not functioning. Please have a look at it. Thank you.

—> Purchase or Repair:
#Advance Industries by tricarick on 2015-01-06 13:41
Gate control board on Industries 116220 D 107243-0002 just failed. Will troubleshoot and replace ASAP.

—> Purchase or Repair:
#Advance Industries by SUSAN on 2009-05-05 04:44
Do you have another Advance Industries 116220 D board available for sale or repair? Production is currently down and we need to keep things running.

—> Purchase or Repair:
#Advance Industries by Burhanettin SEN on 2009-12-18 19:06
The board for the Advance Industries 116220 D 107243-0002 unit is exhibiting unexpected behavior. It is not functioning as it typically does.

—> Purchase or Repair:
#Advance Industries by Luis Raul Godinez on 2006-11-16 11:57
The Advance Industries 116220-D 107243-0002 is a control board unit that is not functioning.

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-03-22 13:15
I have a touch n\'go remote garage door opener (390-19 mhz) for my overhead door garage opener and it works fine. I would love to get another one. I believe this has a date of 1985 on it and don\'t know if these are still possible to get. Any help? Thank yo

—> Purchase or Repair:
#Advance Industries by Williams on 2009-11-13 00:48
I have been searching everywhere for an opener to my garage door.It is an older model manufactured by Overhead Door with a transformer attached manufactured by Advance Industries class 2 year \'92 model.If you have a solution please email me or call me at (903)819-5907.

—> Purchase or Repair:
#Advance Industries by Gary Abbott on 2009-05-13 18:54
The Advance Industries 116220 D 107243-0002 board unit is currently not functioning. Maintenance team is troubleshooting the issue.

—> Purchase or Repair:
#Advance Industries by ken castro on 2009-03-11 10:11
I'm sorry, but something seems to be off with the board on the Advance Industries 116220 D 107243-0002 machine. It appears to have stopped functioning correctly.

—> Purchase or Repair:
#Advance Industries by Thomasvog on 2009-12-29 11:17
One of the Advance Industries 116220 D 107243-0002 units in the warehouse is behaving unusually. It is not functioning as it typically does. Please take a look at it when you get a chance. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.