Advance Industries Service & Repair Forum

We are still waiting for a response regarding the Advance Industries 116220 D 107243-0002 board. Please provide an update as soon as possible as the unit is still down. Thank you.

—> Purchase or Repair: Ticket Image

— Posted by Royce D. Cooper on 2009-05-19

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Hubie Colquitt on 2009-06-14 18:56
Could you please provide repair information for the Advance Industries 116220 D 107243-0002 board? Our team on-site urgently needs to replace it. Thank you.

—> Purchase or Repair:
#Advance Industries by Golub on 2009-10-22 20:59
Advance Industries 116220 D 107243-0002 is down with Error Code E12 indicating a board issue. Please advise on next steps for repair. Thank you.

—> Purchase or Repair:
#Advance Industries by PROM on 2009-11-25 02:52
Hi, I am checking off my to-do list and wanted to ask if the Advance Industries 116220 D 107243-0002 board can be repaired or if a new one needs to be purchased? Thank you!

—> Purchase or Repair:
#Advance Industries by Paul Leland on 2009-07-02 00:20
We have the circuit board listed above in our gate operator and the manual timing wheel on the board seems to be eradic as I put it to min. and the gate stays open approx 9 minutes. Before I played with it today, the gate would stay all the way open for 1 1/2 seconds before closing.Any suggestions?—…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Ziganay on 2009-07-08 06:22
Hello, my Advance Industries 116220 D 107243-0002 board is malfunctioning and in need of repairs. Looking for a technician to help resolve the issue quickly.

—> Purchase or Repair:
#Advance Industries by Lebedev on 2014-12-18 09:44
Machine is not powering on.

—> Purchase or Repair:
#Advance Industries by Howard on 2009-10-20 17:32
We experienced downtime with the Advance Industries 116220 D 107243-0002 unit today due to a board issue. The incident occurred during the night shift around 1130 PM. Can you provide insights on what might have caused it before the next shift begins?

—> Purchase or Repair:
#Advance Industries by HOWAR on 2009-06-08 11:55
Could you kindly confirm if the Advance Industries 116220 D 107243-0002 board is still supported, and if there are replacement parts available for this unit? Thank you.

—> Purchase or Repair:
#Advance Industries by Stacey on 2014-10-17 16:03
Machine 116220 D 107243-0002 is not booting up, displaying "Error Code 34".

—> Purchase or Repair:
#Advance Industries by Ray Hellmann on 2014-05-02 18:20
The Advance Industries 116220 D 107243-0002 circuit board is not working.

—> Purchase or Repair:
#Advance Industries by ADNAN HRNJIC on 2014-02-12 18:58
Hi there! Just wanted to bring to your attention that the Advance Industries 116220 D 107243-0002 circuit board malfunctioned earlier today at 330 PM, causing downtime for the production line. Could you please provide insights on what might have caused the issue? Thank you!

—> Purchase or Repair:
#Advance Industries by Rodrigo Avendano on 2009-08-17 16:02
Can you please provide information on repairs for Advance Industries 116220 D 107243-0002 board? The client is experiencing issues and needs guidance.

—> Purchase or Repair:
#Advance Industries by Aldo G. Quilang on 2009-05-02 02:09
Hello, I am interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
The circuit board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need immediate repair service to resolve this issue and get the line running smoothly again.

—> Purchase or Repair:
#Advance Industries by Dumangas on 2009-03-18 01:00
I'm facing a problem with the Advance Industries 116220 D 107243-0002 board. It seems that something has stopped working, but I'm not exactly sure what the issue is. I will need to investigate further to determine the cause of the malfunction.

—> Purchase or Repair:
#Advance Industries by Mr.Simon on 2015-07-30 16:20
Can the Advance Industries 116220 D 107243-0002 Gate Control Board be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Advance Industries by mangesh shanbhag on 2009-10-20 19:32
The Advance Industries 116220 D 107243-0002 board is not working as reported.

—> Purchase or Repair:
#Advance Industries by John D on 2020-08-30 20:28
I have an Overhead Garage Door Opener Model 100. I am looking for a replacement receiver P/N 107224-0014.

—> Purchase or Repair:
#Advance Industries by huanmatusp on 2009-08-01 15:02
Drive 107243-0002 on Advance Industries 116220 D failed, need replacement ASAP. Keep line running smoothly.

—> Purchase or Repair:
#Advance Industries by Jarod Ballardo on 2009-05-29 07:06
The Advance Industries 116220 D 107243-0002 board is not working as per the shop.

—> Purchase or Repair:
#Advance Industries by Ikerman on 2009-03-11 13:11
Hello, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Premanku on 2015-07-28 02:20
the Advance Industries 116220 D 107243-0002 gate control board is down. Needs immediate attention tomorrow. - Night Shift Maintenance Crew

—> Purchase or Repair:
#Advance Industries by tukaram on 2009-08-31 10:26
Hello, I am in need of repair info for an Advance Industries 116220 D 107243-0002 board. Can you please provide details on how to get this fixed? Thank you.
—> See more:

—> Purchase or Repair:
#Advance Industries by DeeAnne on 2005-08-30 23:03
Hi,I am in desparate need of a wiring diagram for an Advance industries 116220D board for a Mckinney Electronics operator. We need to add a reflective detector and the board we have does not have a labelled terminal block. We would appreciate any information you might have.Thanks,DeeAnne—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Michelle Hurley on 2014-01-07 19:22
We experienced downtime with the Advance Industries 116220 D 107243-0002 circuit board earlier today around 230 PM. Can you provide some insight into what might have caused the issue? It's crucial information we need before the next shift begins. Thank you!

—> Purchase or Repair:
#Advance Industries by Rudy Martens on 2009-12-17 22:53
Machine displaying error code X32 upon startup.

—> Purchase or Repair:
#Advance Industries by Susnjevic on 2009-07-28 15:42
I'm currently facing an issue with the Advance Industries 116220 D 107243-0002. It seems like there's a problem with the board, causing the machine to stop working properly. I will need to investigate further to determine the exact nature of the issue.

—> Purchase or Repair:
#Advance Industries by Steven Lorke on 2014-06-27 21:50
Machine is not powering on.

—> Purchase or Repair:
#Advance Industries by Beniamin on 2009-12-16 23:16
Board on Advance Industries 116220 D 107243-0002 just went down. Need replacement ASAP to restore operation.

—> Purchase or Repair:
Advance Industries 116220 D 107243-0002 board went down mid-shift. Need someone to follow up during the day.

—> Purchase or Repair:
#Advance Industries by orru on 2009-07-18 12:38
Board on Advance Industries 116220 D 107243-0002 malfunctioning. Urgent repair needed to resume production. Line stoppage impacting output. Address immediately to avoid further delays.

—> Purchase or Repair:
#Advance Industries by Robberechts Senne on 2009-11-11 23:30
The Advance Industries 116220 D 107243-0002 board malfunctioned mid-shift. Need follow-up during the day.

—> Purchase or Repair:
#Advance Industries by Waarvik on 2009-03-09 23:11
Hello, I'm inquiring about the Advance Industries 116220 D 107243-0002 board. Can this be repaired or purchased as a replacement? I'm looking to address this as soon as possible. Thank you!

—> Purchase or Repair:
#Advance Industries by Hasan Ahmed Syed on 2006-10-26 23:27
The control board (116220-D 107243-0002) on the production line is malfunctioning, causing disruptions and delays. Immediate repair service is needed to restore full production capacity.

—> Purchase or Repair:
#Advance Industries by Jacky on 2009-03-29 04:00
I would like to inquire if you have an Advance Industries 116220 D 107243-0002 board available for purchase or repair. Thank you.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board just failed on machine 5. Need to replace ASAP to avoid downtime.

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-03-28 13:52
Can you tell me if it is possible to get a replacement remote for a Touch n Go remote I purchaced in 1985. It is coded 390-19. there is an antenna model 702, ser#751015 if that helps. also the door opener is a model R80-az. Thank you

—> Purchase or Repair:
#Advance Industries by aziz fayek aziz on 2009-10-20 12:32
Issue The Advance Industries 116220 D 107243-0002 board is not powering on.

—> Purchase or Repair:
#Advance Industries by Tibbetts on 2009-03-17 00:45
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need immediate repair service to resolve this critical issue and get the production line back up and running.

—> Purchase or Repair:
#Advance Industries by Donald Marcotte on 2013-01-21 16:15
I am looking for a circuit board Advanced Industries model No. 116220 D P/N 107243-0002 LOGIC TIMER

—> Purchase or Repair:
#Advance Industries by Adlen on 2009-03-21 19:21
We are experiencing a critical failure in the circuit board of the Advance Industries 116220 D 107243-0002 equipment. Production has come to a halt and we require immediate repair service to get the line running again. Please prioritize this issue.

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-03-22 13:20
I forgot to mention the model of the door opener is R80-az It is 115volts and 60amps 1/3 hp. There is a separate antenna mod 702 ser#751015 code 390-19 Thank you

—> Purchase or Repair:
#Advance Industries by Bonnie Pierson on 2009-08-19 20:31
The Advance Industries 116220 D 107243-0002 board is not functioning and needs attention from the maintenance team.

—> Purchase or Repair:
Dear Sir/Madam,I am looking for a part that you have in store. That is part model no. 116220 D. I would like to know how much this part will cost me.I am looking forward for a reply.yours sincerly, Nando Semeleer.

—> Purchase or Repair:
#Advance Industries by vu on 2009-12-31 18:48
Hello, I hope this message finds you well. I am reaching out regarding the Advance Industries 116220 D 107243-0002 board. Our team is looking to locate a replacement or repair option for this unit. Since it is older and we are unsure of the manufacturer, could you please confirm if this unit is stil…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Burhanettin SEN on 2009-12-18 19:06
The board for the Advance Industries 116220 D 107243-0002 unit is exhibiting unexpected behavior. It is not functioning as it typically does.

—> Purchase or Repair:
#Advance Industries by Stalzer on 2009-07-27 04:35
The Advance Industries 116220 D 107243-0002 board unit is not working properly. Maintenance team needs to check and repair it.

—> Purchase or Repair:
#Advance Industries by Charles Donnell on 2009-12-29 14:17
The Advance Industries 116220 D 107243-0002 board is currently not functioning. Please check it out as soon as possible. Thank you.

—> Purchase or Repair:
#Advance Industries by leila on 2009-10-26 13:23
Hello, we have an Advance Industries 116220 D 107243-0002 board that requires repair. Could you please provide us with the repair information as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by Carolyn McCrary on 2009-12-14 06:48
"Unit 116220 D 107243-0002 board failure during night shift. Needs attention ASAP. - Maintenance Crew"

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.