Advance Industries Service & Repair Forum

Logic timer board in Advance Industries 116220D 107243-0002 is malfunctioning, halting production line. Urgent repair needed to resume operations immediately.

—> Purchase or Repair: Ticket Image

— Posted by manny on 2005-12-21

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by JIM on 2008-10-01 19:53
COULD YOU POINT ME IN THE RIGHT DIRECTION FOR A MANUAL FOR A 116220D? I;M TRYING TO DISABLE THE TIMER OR ADD PHOTO EYES.

—> Purchase or Repair:
#Advance Industries by Howard on 2009-10-20 17:32
We experienced downtime with the Advance Industries 116220 D 107243-0002 unit today due to a board issue. The incident occurred during the night shift around 1130 PM. Can you provide insights on what might have caused it before the next shift begins?

—> Purchase or Repair:
#Advance Industries by JERE L. WILSON on 2009-05-31 09:37
Please provide an update on the status of the Advance Industries 116220 D 107243-0002 board. The unit is still not functioning, and we need assistance urgently. Your

—> Purchase or Repair:
#Advance Industries by Greenlaw on 2009-08-24 14:26
I'm currently experiencing an issue with the Advance Industries 116220 D 107243-0002 board. It seems like something has stopped working, and I'm unsure about what the specific problem is. Your assistance in resolving this would be greatly appreciated.

—> Purchase or Repair:
#Advance Industries by Dumangas on 2009-03-18 01:00
I'm facing a problem with the Advance Industries 116220 D 107243-0002 board. It seems that something has stopped working, but I'm not exactly sure what the issue is. I will need to investigate further to determine the cause of the malfunction.

—> Purchase or Repair:
#Advance Industries by Helvie on 2009-12-04 02:00
Please advise if the Advance Industries 116220 D 107243-0002 board is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Advance Industries by Premanku on 2015-07-28 02:20
the Advance Industries 116220 D 107243-0002 gate control board is down. Needs immediate attention tomorrow. - Night Shift Maintenance Crew

—> Purchase or Repair:
#Advance Industries by Nikita on 2009-06-27 12:07
Hello, we have an issue with the Advance Industries 116220 D 107243-0002 board. Could you please provide repair information or a replacement as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by Leach on 2014-04-03 17:29
The circuit board in Advance Industries 116220 D 107243-0002 just went out, causing a machine shutdown. Need immediate replacement to keep the line running.

—> Purchase or Repair:
#Advance Industries by Tibbits on 2009-03-11 02:11
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair to keep production running?

—> Purchase or Repair:
#Advance Industries by J.Y. on 2009-10-14 20:43
The Advance Industries 116220 D 107243-0002 unit is still down. Please provide an update as soon as possible.

—> Purchase or Repair:
#Advance Industries by Bonnie Pierson on 2009-08-19 20:31
The Advance Industries 116220 D 107243-0002 board is not functioning and needs attention from the maintenance team.

—> Purchase or Repair:
#Advance Industries by wiley on 2009-11-17 19:47
Hello, I'm inquiring about the Advance Industries 116220 D 107243-0002 board. Can this item be repaired or replaced? I'm trying to get this sorted as soon as possible. Thank you!

—> Purchase or Repair:
#Advance Industries by Stacey on 2014-10-17 16:03
Machine 116220 D 107243-0002 is not booting up, displaying "Error Code 34".

—> Purchase or Repair:
#Advance Industries by Igor Tustanowski on 2009-01-18 04:58
Do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit went down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by lajcsi on 2009-12-26 08:17
The board on Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. Urgent repair or replacement is needed to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by Williams on 2009-11-13 00:48
I have been searching everywhere for an opener to my garage door.It is an older model manufactured by Overhead Door with a transformer attached manufactured by Advance Industries class 2 year \'92 model.If you have a solution please email me or call me at (903)819-5907.

—> Purchase or Repair:
#Advance Industries by Mike Johnson on 2009-08-04 11:48
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a production line stoppage. Please address this issue urgently to resume operations.

—> Purchase or Repair:
#Advance Industries by Dave Mitton on 2009-10-16 17:31
Do you have any Advance Industries 116220 D 107243-0002 boards available for sale or repair to keep production running?

—> Purchase or Repair:
#Advance Industries by Mitch on 2015-03-31 15:34
Contact me if you still need themMiMarch 31 2015

—> Purchase or Repair:
#Advance Industries by McSpadden on 2009-11-17 20:23
I'm sorry, but something seems to be off with the Advance Industries 116220 D 107243-0002 board. It appears to have stopped working properly.

—> Purchase or Repair:
#Advance Industries by shathi on 2009-10-23 11:15
I'm currently experiencing a problem with the Advance Industries 116220 D 107243-0002 machine. It seems that something stopped working and I'm not quite sure what the issue is. Any help or guidance you could provide would be greatly appreciated.

—> Purchase or Repair:
#Advance Industries by Sabin on 2009-11-23 23:58
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse. Please provide a description of the abnormal actions you are observing.

—> Purchase or Repair:
#Advance Industries by Alexandros on 2009-11-19 10:02
Can this Advance Industries 116220 D 107243-0002 board be repaired or replaced? I'm just trying to check this off my to-do list.

—> Purchase or Repair:
#Advance Industries by aziz fayek aziz on 2009-10-20 12:32
Issue The Advance Industries 116220 D 107243-0002 board is not powering on.

—> Purchase or Repair:
#Advance Industries by troy gowan on 2010-09-16 21:08
I have a overhead garage doors opener. model 100. I am looking for a replacment remot and reciverreciver number is 107224-0014

—> Purchase or Repair:
#Advance Industries by Weir on 2009-09-02 19:21
Please prioritize addressing the malfunction on the Advance Industries 116220 D 107243-0002 board as it's significantly impacting our production line. Your urgent attention to this matter is required to resume operations

—> Purchase or Repair:
#Advance Industries by Joseph Conner on 2009-03-11 17:11
Please provide an update on the status of our Advance Industries 116220 D 107243-0002 board. The unit is still down, and we require immediate attention. Your

—> Purchase or Repair:
do you have the light board that plugs into the 116220d timer board

—> Purchase or Repair:
#Advance Industries by wildbill on 2017-07-26 18:11
The logic timer board was used in the Crusader C-300 and C-350 slide gate operators by McKinney Electronics/Overhead Door. I would be interested in purchasing this board if it is still available and known to be functional. Mine has the same issue as described in the iernc post by David Prevo in Oct.…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Russell Diaz on 2009-05-06 18:25
I work for Overhead Door Company of Las Cruces and we have the logic timer board in stock, but nobody hear seems to know what it goes into. We assume it\'s for a gate operator but we don\'t lnow which model> I believe it maybe for several different models.Can you help?Thanks

—> Purchase or Repair:
#Advance Industries by Steve DeLurgio on 2009-03-11 22:11
Hello, can the Advance Industries 116220 D 107243-0002 board be repaired or purchased? I'm trying to resolve this as part of my to-do list. Thank you.

—> Purchase or Repair:
#Advance Industries by Gaudette on 2009-07-13 09:11
I'm experiencing a problem with the Advance Industries 116220 D 107243-0002 - it seems like the board is malfunctioning. I'm not entirely sure what this model does, but something has definitely stopped working.

—> Purchase or Repair:
#Advance Industries by Michelle Hurley on 2014-01-07 19:22
We experienced downtime with the Advance Industries 116220 D 107243-0002 circuit board earlier today around 230 PM. Can you provide some insight into what might have caused the issue? It's crucial information we need before the next shift begins. Thank you!

—> Purchase or Repair:
#Advance Industries by Marques Cedric on 2014-12-16 22:44
Equipment ID Advance Industries 116220 D 107243-0002Issue Machine not powering up, displaying Error Code 302. Investigation needed ASAP. Please advise on next steps.

—> Purchase or Repair:
#Advance Industries by Gustavo Gil on 2009-07-29 01:00
The Advance Industries 116220 D 107243-0002 board is showing error code E102. Equipment is not powering up despite multiple restart attempts. Please advise.

—> Purchase or Repair:
#Advance Industries by Mr.Simon on 2015-07-30 16:20
Can the Advance Industries 116220 D 107243-0002 Gate Control Board be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Advance Industries by Scheele on 2014-11-18 00:25
We experienced downtime with Advance Industries 116220 D 107243-0002 due to a faulty circuit board at 1030 pm last night. Need a quick resolution before the next shift starts.

—> Purchase or Repair:
#Advance Industries by Rudy Martens on 2009-12-17 22:53
Machine displaying error code X32 upon startup.

—> Purchase or Repair:
#Advance Industries by Schanz on 2009-01-13 23:00
Hello, I am contacting you on behalf of our client regarding Advance Industries 116220 D 107243-0002. They are experiencing issues with the board and are seeking assistance. Please provide details on how we can proceed with repair or replacement. Thank you.

—> Purchase or Repair:
#Advance Industries by sutrisno on 2015-07-24 14:43
The Advance Industries 116220 D 107243-0002 Gate Control Board is not working properly.

—> Purchase or Repair:
#Advance Industries by Sandra Contreras on 2009-12-11 02:24
Hello, I hope you're doing well. I was asked to get the Advance Industries 116220 D 107243-0002 board fixed or replaced. Before making a decision, may I know if it's possible to repair this board or if it needs to be purchased new? I'm trying to get this resolved as soon as possible. Thank you for y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by dennis yost on 2013-12-27 15:43
i need to replace 1 black box for a horton opener brand name - Horton easy access number on the board inside box - 107846-0001 Freq - 360 Mfg - 92 48 Fcc Id: BSH8YN107846Unable to find item on Google or EbayIs it still available? thanks dennis

—> Purchase or Repair:
#Advance Industries by John D on 2020-08-30 20:28
I have an Overhead Garage Door Opener Model 100. I am looking for a replacement receiver P/N 107224-0014.

—> Purchase or Repair:
#Advance Industries by Patrick Deschamps on 2015-02-11 03:04
I need assistance with my Advance Industries 116220 D 107243-0002 Gate Control Board. The unit is currently down, and I need to keep production running. Do you have a replacement available for sale or repair? Thank you.

—> Purchase or Repair:
#Advance Industries by Nash on 2015-07-25 03:20
The Advance Industries 116220 D 107243-0002 Gate Control Board is displaying error code E203 and the gate is not responding to any commands. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by Israel on 2014-12-12 03:16
I need an immediate update on the status of the Advance Industries 116220 D 107243-0002 circuit board. The unit is still down. Please provide a response

—> Purchase or Repair:
#Advance Industries by Dennis Sytsma on 2010-11-10 22:38
I need repair or replacement information regarding COPS board for the R-200 PN # 108939-0001 and other part numbers. Made by McKinney electronics for residential slide gate operator. Orginial part number was 940036-2 that came in a box marked overhead door company with no address. I purchased this s…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by leila on 2009-10-26 13:23
Hello, we have an Advance Industries 116220 D 107243-0002 board that requires repair. Could you please provide us with the repair information as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by PARDI on 2009-02-13 13:46
the Advance Industries 116220 D board in unit 107243-0002 went down mid-shift. Please check it out and troubleshoot in the morning. Thanks!

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.