Advance Industries Service & Repair Forum

I'm sorry, but something seems to be off with the board on the Advance Industries 116220 D 107243-0002 machine. It appears to have stopped functioning correctly.

—> Purchase or Repair: Ticket Image

— Posted by ken castro on 2009-03-11

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by JORGE TALERO on 2009-05-25 01:00
Hello, I'm reaching out regarding the Advance Industries 116220 D 107243-0002 board. I was instructed to either repair or replace it, but I'm uncertain of its function. Could you please advise if this item can be repaired or if a new one needs to be purchased? I'm aiming to

—> Purchase or Repair:
#Advance Industries by tricarick on 2015-01-06 13:41
Gate control board on Industries 116220 D 107243-0002 just failed. Will troubleshoot and replace ASAP.

—> Purchase or Repair:
#Advance Industries by GEORGE SUTTON on 2009-02-23 12:04
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior - it is not functioning as it normally does.

—> Purchase or Repair:
#Advance Industries by Luis Raul Godinez on 2006-11-16 11:57
The Advance Industries 116220-D 107243-0002 is a control board unit that is not functioning.

—> Purchase or Repair:
#Advance Industries by RS on 2009-12-26 00:04
I will reach out to Advance Industries regarding the Advance Industries 116220 D 107243-0002 board to inquire about support and parts availability.

—> Purchase or Repair:
#Advance Industries by Sandra Contreras on 2009-12-11 02:24
Hello, I hope you're doing well. I was asked to get the Advance Industries 116220 D 107243-0002 board fixed or replaced. Before making a decision, may I know if it's possible to repair this board or if it needs to be purchased new? I'm trying to get this resolved as soon as possible. Thank you for y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Samuel Morales on 2009-04-04 08:42
The Advance Industries 116220 D 107243-0002 board is not powering on, hindering production.

—> Purchase or Repair:
#Advance Industries by HOWAR on 2009-06-08 11:55
Could you kindly confirm if the Advance Industries 116220 D 107243-0002 board is still supported, and if there are replacement parts available for this unit? Thank you.

—> Purchase or Repair:
#Advance Industries by david ambler on 2010-09-08 12:31
Remote shows FCC# only the garage door opener is overhead door 450A I would like to find another spare remote.It is medium brown in color with a brown button and an ivory color button .The remote operates 2 doors and has 2 code selection modules one for each door.

—> Purchase or Repair:
#Advance Industries by Israel on 2014-12-12 03:16
I need an immediate update on the status of the Advance Industries 116220 D 107243-0002 circuit board. The unit is still down. Please provide a response

—> Purchase or Repair:
#Advance Industries by wiley on 2009-11-17 19:47
Hello, I'm inquiring about the Advance Industries 116220 D 107243-0002 board. Can this item be repaired or replaced? I'm trying to get this sorted as soon as possible. Thank you!

—> Purchase or Repair:
#Advance Industries by Gary Abbott on 2009-05-13 18:54
The Advance Industries 116220 D 107243-0002 board unit is currently not functioning. Maintenance team is troubleshooting the issue.

—> Purchase or Repair:
#Advance Industries by j williams on 2005-12-28 08:12
Advance Industries 116220D 107243-0002 logic timer board malfunctioning, halting production line. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by danny morales on 2012-04-04 03:50
I have this board in my gate opener and need to find owner manual or just need to find out how to hook up the coaxial receiver to this board 760 252 9000

—> Purchase or Repair:
#Advance Industries by ismael on 2014-02-19 07:19
The Advance Industries 116220 D 107243-0002 circuit board malfunctioned causing unexpected downtime earlier today around 1130 am. Need to resolve this issue before the next shift starts. Any insights or suggestions would be greatly appreciated.

—> Purchase or Repair:
#Advance Industries by Greenlaw on 2009-08-24 14:26
I'm currently experiencing an issue with the Advance Industries 116220 D 107243-0002 board. It seems like something has stopped working, and I'm unsure about what the specific problem is. Your assistance in resolving this would be greatly appreciated.

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-03-28 13:52
Can you tell me if it is possible to get a replacement remote for a Touch n Go remote I purchaced in 1985. It is coded 390-19. there is an antenna model 702, ser#751015 if that helps. also the door opener is a model R80-az. Thank you

—> Purchase or Repair:
#Advance Industries by Nabil Ghanem on 2009-11-18 09:51
The Advance Industries 116220 D 107243-0002 board is malfunctioning, causing a complete halt in the production line. Urgent repair service is required to address the issue

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board is malfunctioning, halting the production line. Urgent repair needed to resume operations

—> Purchase or Repair:
#Advance Industries by martin zarate on 2005-12-30 01:51
The logic timer board on our Advance Industries 116220D 107243-0002 is malfunctioning, causing an interruption in the production line. We need immediate repair service to rectify the issue and resume operations swiftly.

—> Purchase or Repair:
#Advance Industries by virenderm mudgil on 2015-08-12 16:20
Could you please provide information on whether the Advance Industries 116220 D 107243-0002 Gate Control Board is still supported or if replacement parts are available?

—> Purchase or Repair:
#Advance Industries by Jerry Fields on 2011-05-12 15:21
I need to purchase 2 ea. Advance Industries Garage Door OpenersFCC ID: BSH8YN213

—> Purchase or Repair:
#Advance Industries by Igor Tustanowski on 2009-01-18 04:58
Do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit went down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by michael on 2009-05-08 12:48
I HAVE A KEW 16 40 HA, AND IM HAVING PROBLEMS TRYING TO FIX IT!IT WONT RUN AT ALL,THOUGHT IT MIGHT BE THE COIL , CHECKED THE WIERING! AND STILL NOTHING? HELPMANY THANKS MICHAEL

—> Purchase or Repair:
#Advance Industries by collavet on 2015-07-11 01:32
Gate control board on Advance Industries 116220 D 107243-0002 just failed. Heading to assess and replace it ASAP to minimize downtime.

—> Purchase or Repair:
#Advance Industries by Crispian on 2009-05-23 15:59
The Advance Industries 116220 D 107243-0002 board malfunctioned and caused downtime today during the afternoon shift. Need resolution urgently.

—> Purchase or Repair:
#Advance Industries by JERE L. WILSON on 2009-05-31 09:37
Please provide an update on the status of the Advance Industries 116220 D 107243-0002 board. The unit is still not functioning, and we need assistance urgently. Your

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-04-02 13:14
I am looking for another or a replacement for the Touch n go (390-19mhz) remote that I now have. As far as I can tell it was from 1985 and is analog. It is for my \"Overhead Door\" garage door opener from the early 1970\'s. I would love to get another one for my wifes car. Thank you—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Howard on 2009-10-20 17:32
We experienced downtime with the Advance Industries 116220 D 107243-0002 unit today due to a board issue. The incident occurred during the night shift around 1130 PM. Can you provide insights on what might have caused it before the next shift begins?

—> Purchase or Repair:
#Advance Industries by CrurordVoxy on 2014-02-20 08:00
Experiencing issues with Advance Industries circuit board 116220 D 107243-0002, causing production downtime. Need repair service ASAP to get the industrial unit operational again.

—> Purchase or Repair:
I'm working with Advance Industries 116220 D 107243-0002, and the board seems to be the issue. The equipment is down, and I'm not sure why. No error code is displaying. Please advise on next steps to troubleshoot.

—> Purchase or Repair:
#Advance Industries by manny on 2005-12-21 00:47
Logic timer board in Advance Industries 116220D 107243-0002 is malfunctioning, halting production line. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by Olga on 2009-12-04 01:00
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair? We need it urgently to keep production running.

—> Purchase or Repair:
#Advance Industries by Thomasvog on 2009-12-29 11:17
One of the Advance Industries 116220 D 107243-0002 units in the warehouse is behaving unusually. It is not functioning as it typically does. Please take a look at it when you get a chance. Thank you.

—> Purchase or Repair:
#Advance Industries by HESAM on 2009-08-13 05:45
Hello, I need someone to repair my Advance Industries 116220 D 107243-0002 board. It's malfunctioning and affecting our production. Your urgent attention is greatly appreciated.

—> Purchase or Repair:
#Advance Industries by Kei Saito on 2005-12-09 21:47
The Advance Industries 116220D logic timer board with model number 107243-0002 is behaving unexpectedly. It is not operating as usual and displaying strange characteristics. Please investigate the issue further to determine the cause of the abnormal behavior.

—> Purchase or Repair:
#Advance Industries by Curran on 2009-09-14 12:12
Looking for repair for an Advance Industries 116220 D 107243-0002 board. Unit not functioning, need a technician ASAP.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board is not working. That's all we know from the shop.

—> Purchase or Repair:
#Advance Industries by Gaudette on 2009-07-13 09:11
I'm experiencing a problem with the Advance Industries 116220 D 107243-0002 - it seems like the board is malfunctioning. I'm not entirely sure what this model does, but something has definitely stopped working.

—> Purchase or Repair:
#Advance Industries by Rudy Martens on 2009-12-17 22:53
Machine displaying error code X32 upon startup.

—> Purchase or Repair:
#Advance Industries by Bonnie Briggs on 2021-03-31 20:15
I have 2 remote garage door openers made by Advance Industries, Shelbyville, IN. One works very well. The other was kept in storage and the battery inside leaked and corroded the battery connector. These use a 9-volt battery. The FCC ID number is BSH8YN106546 and the MFG. number is 081587. The Freq.…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Gustavo Gil on 2009-07-29 01:00
The Advance Industries 116220 D 107243-0002 board is showing error code E102. Equipment is not powering up despite multiple restart attempts. Please advise.

—> Purchase or Repair:
#Advance Industries by Strube on 2009-12-24 12:33
Do you have a board available for Advance Industries 116220 D 107243-0002? Our unit is down, and we need to keep production running.

—> Purchase or Repair:
#Advance Industries by rodriguez on 2009-12-08 15:51
Can the Advance Industries 116220 D 107243-0002 board be repaired or bought? Just trying to check this off my to-do list.

—> Purchase or Repair:
do you have the light board that plugs into the 116220d timer board

—> Purchase or Repair:
#Advance Industries by Joseph Snow on 2011-01-21 14:15
Need a manual for a 24 volt AC power door opener, in order to hook it up

—> Purchase or Repair:
#Advance Industries by coflienoblofs on 2009-12-03 23:32
the Advance Industries 116220 D 107243-0002 board went down mid-shift. Needs checking first thing in the AM. - Night shift team

—> Purchase or Repair:
#Advance Industries by Robberechts Senne on 2009-11-11 23:30
The Advance Industries 116220 D 107243-0002 board malfunctioned mid-shift. Need follow-up during the day.

—> Purchase or Repair:
#Advance Industries by Paul Leland on 2009-07-02 00:20
We have the circuit board listed above in our gate operator and the manual timing wheel on the board seems to be eradic as I put it to min. and the gate stays open approx 9 minutes. Before I played with it today, the gate would stay all the way open for 1 1/2 seconds before closing.Any suggestions?—…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Susnjevic on 2009-07-28 15:42
I'm currently facing an issue with the Advance Industries 116220 D 107243-0002. It seems like there's a problem with the board, causing the machine to stop working properly. I will need to investigate further to determine the exact nature of the issue.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.