Advance Industries Service & Repair Forum

The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need immediate repair service to resolve this critical issue and get the production line back up and running.

—> Purchase or Repair: Ticket Image

— Posted by Tibbetts on 2009-03-17

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by lajcsi on 2009-12-26 08:17
The board on Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. Urgent repair or replacement is needed to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by aldape on 2014-12-28 14:06
The Advance Industries 116220 D 107243-0002 Circuit Board is not functioning as expected. It is exhibiting irregular behavior that is not in line with its normal operations.

—> Purchase or Repair:
#Advance Industries by naden on 2009-08-14 20:50
Looking for repair on Advance Industries 116220 D 107243-0002 board. Currently not functioning or powering up. Need someone to diagnose and fix the issue

—> Purchase or Repair:
#Advance Industries by Paul Leland on 2009-07-02 00:20
We have the circuit board listed above in our gate operator and the manual timing wheel on the board seems to be eradic as I put it to min. and the gate stays open approx 9 minutes. Before I played with it today, the gate would stay all the way open for 1 1/2 seconds before closing.Any suggestions?—…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by lora linville on 2009-05-18 17:43
Hello, I am reaching out on behalf of a client who is in need of assistance with an Advance Industries 116220 D 107243-0002 board. They have indicated that there seems to be an issue with the board. Can you please provide information on potential repair options and cost estimates? Thank you.—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Dumangas on 2009-03-18 01:00
I'm facing a problem with the Advance Industries 116220 D 107243-0002 board. It seems that something has stopped working, but I'm not exactly sure what the issue is. I will need to investigate further to determine the cause of the malfunction.

—> Purchase or Repair:
#Advance Industries by david ambler on 2010-09-08 12:31
Remote shows FCC# only the garage door opener is overhead door 450A I would like to find another spare remote.It is medium brown in color with a brown button and an ivory color button .The remote operates 2 doors and has 2 code selection modules one for each door.

—> Purchase or Repair:
#Advance Industries by Howard O Line on 2009-05-15 13:24
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by Josue Canaves on 2009-03-09 15:11
Advance Industries 116220 D 107243-0002 is showing error code E005 and is not responding to touch commands. Please advise on possible troubleshooting steps. Thank you.

—> Purchase or Repair:
#Advance Industries by Stalzer on 2009-07-27 04:35
The Advance Industries 116220 D 107243-0002 board unit is not working properly. Maintenance team needs to check and repair it.

—> Purchase or Repair:
#Advance Industries by orru on 2009-07-18 12:38
Board on Advance Industries 116220 D 107243-0002 malfunctioning. Urgent repair needed to resume production. Line stoppage impacting output. Address immediately to avoid further delays.

—> Purchase or Repair:
#Advance Industries by Thanh on 2009-09-10 02:15
Hi there, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you confirm the pricing and availability for this model? My team recommended reaching out as we are looking to source one quickly. Thank you!

—> Purchase or Repair:
#Advance Industries by Laura Phipps on 2009-03-09 20:11
My Advance Industries 116220 D 107243-0002 board is not functioning properly and needs repair as soon as possible to prevent any production delays. Looking for a skilled technician who can troubleshoot and fix the issue

—> Purchase or Repair:
#Advance Industries by Clarence Wilson on 2009-01-31 00:29
The Advance Industries 116220 D 107243-0002 board is malfunctioning. Maintenance team needs assistance to address the issue.

—> Purchase or Repair:
#Advance Industries by Russell Diaz on 2009-05-06 18:25
I work for Overhead Door Company of Las Cruces and we have the logic timer board in stock, but nobody hear seems to know what it goes into. We assume it\'s for a gate operator but we don\'t lnow which model> I believe it maybe for several different models.Can you help?Thanks

—> Purchase or Repair:
#Advance Industries by Donald Marcotte on 2013-01-21 16:15
I am looking for a circuit board Advanced Industries model No. 116220 D P/N 107243-0002 LOGIC TIMER

—> Purchase or Repair:
#Advance Industries by Volpe on 2009-12-23 00:34
The Advance Industries 116220 D 107243-0002 board went down mid-shift. Please follow up during the day.

—> Purchase or Repair:
#Advance Industries by ken castro on 2009-03-11 10:11
I'm sorry, but something seems to be off with the board on the Advance Industries 116220 D 107243-0002 machine. It appears to have stopped functioning correctly.

—> Purchase or Repair:
#Advance Industries by danny morales on 2012-04-04 03:50
I have this board in my gate opener and need to find owner manual or just need to find out how to hook up the coaxial receiver to this board 760 252 9000

—> Purchase or Repair:
#Advance Industries by Meglen on 2009-11-28 16:40
Hello, do you have an Advance Industries 116220 D 107243-0002 board available for repair or purchase? Thank you.

—> Purchase or Repair:
#Advance Industries by reidar on 2009-08-22 09:23
Hello, I hope this message finds you well. I would like to inquire if the Advance Industries 116220 D 107243-0002 board can be repaired or if a replacement can be purchased. I am trying to

—> Purchase or Repair:
#Advance Industries by Peter Komrhel on 2009-11-25 17:15
Hello, we are in need of repair information for the Advance Industries 116220 D 107243-0002 board. Could you please provide us with details on how we can get this fixed as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by shathi on 2009-10-23 11:15
I'm currently experiencing a problem with the Advance Industries 116220 D 107243-0002 machine. It seems that something stopped working and I'm not quite sure what the issue is. Any help or guidance you could provide would be greatly appreciated.

—> Purchase or Repair:
#Advance Industries by atilla on 2009-06-23 01:10
Hello, I am interested in purchasing the Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are in urgent need of sourcing one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by WILLIAMSON on 2009-01-26 16:35
The board for the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need urgent repair service to resolve the issue and get the production line running smoothly again.

—> Purchase or Repair:
#Advance Industries by Luis Raul Godinez on 2006-11-16 11:57
The Advance Industries 116220-D 107243-0002 is a control board unit that is not functioning.

—> Purchase or Repair:
#Advance Industries by Beniamin on 2009-12-16 23:16
Board on Advance Industries 116220 D 107243-0002 just went down. Need replacement ASAP to restore operation.

—> Purchase or Repair:
#Advance Industries by Jerry Fields on 2011-05-12 15:21
I need to purchase 2 ea. Advance Industries Garage Door OpenersFCC ID: BSH8YN213

—> Purchase or Repair:
#Advance Industries by nevardo vera on 2005-10-27 01:00
Advance Industries 116220D 107243-0002 logic timer board is malfunctioning, causing a disruption in the production line. Need urgent repair to resume operations

—> Purchase or Repair:
#Advance Industries by ODonovan on 2009-11-09 14:40
Hi there, I am reaching out on behalf of our client regarding part number 116220 D 107243-0002, which involves a board issue. Can you please provide more information on the repair process and estimated cost? Thank you.

—> Purchase or Repair:
#Advance Industries by Ann Ratay on 2016-02-10 02:03
We have 2 overhead garage doors........... but no remotes. They are both Model 55A Garage Door Opener System by The Overhead Door Co. They were installed about 1985. Wondering if there are replacement remotes we can purchase anywhere.Would appreciate any information or help you could provide concern…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Jeremiah Albright on 2009-09-03 07:12
Hello, the Advance Industries 116220 D 107243-0002 is currently down. The display is showing Error Code 4 and there is a constant alarm going off. Please advise on potential causes and next steps for repair. Thank you.

—> Purchase or Repair:
#Advance Industries by Mr.Simon on 2015-07-30 16:20
Can the Advance Industries 116220 D 107243-0002 Gate Control Board be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Advance Industries by SUSAN on 2009-05-05 04:44
Do you have another Advance Industries 116220 D board available for sale or repair? Production is currently down and we need to keep things running.

—> Purchase or Repair:
#Advance Industries by Lind on 2014-05-03 05:20
Advance Industries 116220 D 107243-0002 experiencing extensive circuit board failures disrupting production line. Urgent repair service needed to restore operations ASAP.

—> Purchase or Repair:
#Advance Industries by Hasan Ahmed Syed on 2006-10-26 23:27
The control board (116220-D 107243-0002) on the production line is malfunctioning, causing disruptions and delays. Immediate repair service is needed to restore full production capacity.

—> Purchase or Repair:
#Advance Industries by Corey love on 2009-03-11 04:11
Could you please provide me with pricing and availability details for the Advance Industries 116220 D 107243-0002 board? I am looking to source one quickly and would appreciate your

—> Purchase or Repair:
Hello, I'm reaching out to inquire about the Advance Industries 116220 D 107243-0002 board. We are looking to determine if this unit is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
Dear Sir/Madam,I am looking for a part that you have in store. That is part model no. 116220 D. I would like to know how much this part will cost me.I am looking forward for a reply.yours sincerly, Nando Semeleer.

—> Purchase or Repair:
#Advance Industries by PARDI on 2009-02-13 13:46
the Advance Industries 116220 D board in unit 107243-0002 went down mid-shift. Please check it out and troubleshoot in the morning. Thanks!

—> Purchase or Repair:
#Advance Industries by salah on 2009-03-12 02:11
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair? The unit went down, and we need to keep production running.

—> Purchase or Repair:
#Advance Industries by Bonnie Briggs on 2021-03-31 20:15
I have 2 remote garage door openers made by Advance Industries, Shelbyville, IN. One works very well. The other was kept in storage and the battery inside leaked and corroded the battery connector. These use a 9-volt battery. The FCC ID number is BSH8YN106546 and the MFG. number is 081587. The Freq.…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Gordon Truex on 2014-04-02 13:14
I am looking for another or a replacement for the Touch n go (390-19mhz) remote that I now have. As far as I can tell it was from 1985 and is analog. It is for my \"Overhead Door\" garage door opener from the early 1970\'s. I would love to get another one for my wifes car. Thank you—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Gordon Truex on 2014-03-22 13:20
I forgot to mention the model of the door opener is R80-az It is 115volts and 60amps 1/3 hp. There is a separate antenna mod 702 ser#751015 code 390-19 Thank you

—> Purchase or Repair:
#Advance Industries by Monroe Dodd on 2009-03-17 19:53
Hey, a unit went down mid-shift. Issue with Advance Industries 116220 D 107243-0002 board. Need to check and fix it ASAP.

—> Purchase or Repair:
#Advance Industries by wildbill on 2017-07-26 18:11
The logic timer board was used in the Crusader C-300 and C-350 slide gate operators by McKinney Electronics/Overhead Door. I would be interested in purchasing this board if it is still available and known to be functional. Mine has the same issue as described in the iernc post by David Prevo in Oct.…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Manoj Bhandarkar on 2009-12-03 20:32
Hi there, I need repair info for Advance Industries 116220 D 107243-0002 board. Can you provide details ASAP? Thank you!

—> Purchase or Repair:
#Advance Industries by Juergen.Arpe on 2009-12-29 13:17
I've noticed an issue with the Advance Industries 116220 D 107243-0002. It seems like something on the board has stopped working, but I'm not entirely sure what it does. I will report it to the appropriate department for further investigation.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board just failed on machine 5. Need to replace ASAP to avoid downtime.

—> Purchase or Repair:
#Advance Industries by tukaram on 2009-08-31 10:26
Hello, I am in need of repair info for an Advance Industries 116220 D 107243-0002 board. Can you please provide details on how to get this fixed? Thank you.
—> See more:

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.