Advance Industries Service & Repair Forum

I'm currently experiencing a problem with the Advance Industries 116220 D 107243-0002 machine. It seems that something stopped working and I'm not quite sure what the issue is. Any help or guidance you could provide would be greatly appreciated.

—> Purchase or Repair: Ticket Image

— Posted by shathi on 2009-10-23

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by john.gilmore on 2011-10-31 13:04
I purchased a house with a garage door opener made by advance industries . The remote will only work if you have direct line of site with opener. I have put in fresh batteries. It appears to be very old.Any suggestions would be appreciated.Thanks

—> Purchase or Repair:
#Advance Industries by Igor Tustanowski on 2009-01-18 04:58
Do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit went down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by GEORGE SUTTON on 2009-02-23 12:04
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior - it is not functioning as it normally does.

—> Purchase or Repair:
#Advance Industries by Luley on 2009-05-17 18:18
Drive or board failure on Advance Industries 116220 D 107243-0002. Need immediate attention to prevent downtime.

—> Purchase or Repair:
#Advance Industries by Dennis Sytsma on 2010-11-10 22:38
I need repair or replacement information regarding COPS board for the R-200 PN # 108939-0001 and other part numbers. Made by McKinney electronics for residential slide gate operator. Orginial part number was 940036-2 that came in a box marked overhead door company with no address. I purchased this s…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Leach on 2014-04-03 17:29
The circuit board in Advance Industries 116220 D 107243-0002 just went out, causing a machine shutdown. Need immediate replacement to keep the line running.

—> Purchase or Repair:
#Advance Industries by Waarvik on 2009-03-09 23:11
Hello, I'm inquiring about the Advance Industries 116220 D 107243-0002 board. Can this be repaired or purchased as a replacement? I'm looking to address this as soon as possible. Thank you!

—> Purchase or Repair:
#Advance Industries by Ethan on 2009-11-20 19:54
The board on our Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in our production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
#Advance Industries by JIM on 2008-10-01 19:53
COULD YOU POINT ME IN THE RIGHT DIRECTION FOR A MANUAL FOR A 116220D? I;M TRYING TO DISABLE THE TIMER OR ADD PHOTO EYES.

—> Purchase or Repair:
#Advance Industries by Thomasvog on 2009-12-29 11:17
One of the Advance Industries 116220 D 107243-0002 units in the warehouse is behaving unusually. It is not functioning as it typically does. Please take a look at it when you get a chance. Thank you.

—> Purchase or Repair:
#Advance Industries by jarvis on 2009-11-04 10:40
the Advance Industries 116220 D 107243-0002 board went down mid-shift. Need someone to check it out and troubleshoot ASAP. Thanks!

—> Purchase or Repair:
#Advance Industries by Jacky on 2009-03-29 04:00
I would like to inquire if you have an Advance Industries 116220 D 107243-0002 board available for purchase or repair. Thank you.

—> Purchase or Repair:
The circuit board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need immediate repair service to resolve this issue and get the line running smoothly again.

—> Purchase or Repair:
#Advance Industries by Clarence Wilson on 2009-01-31 00:29
The Advance Industries 116220 D 107243-0002 board is malfunctioning. Maintenance team needs assistance to address the issue.

—> Purchase or Repair:
#Advance Industries by atilla on 2009-06-23 01:10
Hello, I am interested in purchasing the Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are in urgent need of sourcing one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Nash on 2015-07-25 03:20
The Advance Industries 116220 D 107243-0002 Gate Control Board is displaying error code E203 and the gate is not responding to any commands. Please advise on troubleshooting steps or repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by danny morales on 2012-04-04 04:00
I have this board in my gate opener and trying to find out how to hook up a coaxial receiver and a owners manual thank you

—> Purchase or Repair:
#Advance Industries by Rajneesh on 2009-01-24 03:59
The Advance Industries 116220 D 107243-0002 board is showing error code E23 and is not responding to any commands. Need urgent assistance to troubleshoot and fix the issue. Thank you.

—> Purchase or Repair:
#Advance Industries by Rodrigo Avendano on 2009-08-17 16:02
Can you please provide information on repairs for Advance Industries 116220 D 107243-0002 board? The client is experiencing issues and needs guidance.

—> Purchase or Repair:
I need a status update on the Advance Industries 116220 D 107243-0002 Circuit Board. The unit is still down. Please reply

—> Purchase or Repair:
#Advance Industries by naden on 2009-08-14 20:50
Looking for repair on Advance Industries 116220 D 107243-0002 board. Currently not functioning or powering up. Need someone to diagnose and fix the issue

—> Purchase or Repair:
#Advance Industries by Palmer Rodgers on 2009-06-12 20:28
Hey there, can you provide repair info for Advance Industries 116220 D 107243-0002 circuit board? It stopped working and we need a replacement or repair solution urgently. Thank you for your

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-03-22 13:20
I forgot to mention the model of the door opener is R80-az It is 115volts and 60amps 1/3 hp. There is a separate antenna mod 702 ser#751015 code 390-19 Thank you

—> Purchase or Repair:
#Advance Industries by Aldo G. Quilang on 2009-05-02 02:09
Hello, I am interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Jeremiah Albright on 2009-09-03 07:12
Hello, the Advance Industries 116220 D 107243-0002 is currently down. The display is showing Error Code 4 and there is a constant alarm going off. Please advise on potential causes and next steps for repair. Thank you.

—> Purchase or Repair:
#Advance Industries by CrurordVoxy on 2014-02-20 08:00
Experiencing issues with Advance Industries circuit board 116220 D 107243-0002, causing production downtime. Need repair service ASAP to get the industrial unit operational again.

—> Purchase or Repair:
#Advance Industries by Ricardo Rivas on 2009-07-29 13:53
The Advance Industries 116220 D 107243-0002 board is showing Error Code 3B. Equipment not powering on properly. Need urgent repair.

—> Purchase or Repair:
#Advance Industries by Tibbetts on 2009-03-17 00:45
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need immediate repair service to resolve this critical issue and get the production line back up and running.

—> Purchase or Repair:
#Advance Industries by Carmona on 2009-10-26 12:23
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair? Production is down and we need a replacement urgently. Thank you.

—> Purchase or Repair:
#Advance Industries by Sabin on 2009-11-23 23:58
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse. Please provide a description of the abnormal actions you are observing.

—> Purchase or Repair:
I need assistance with Advance Industries part number 116220 D 107243-0002, which is a Gate Control Board. My client is experiencing issues with this board and we would like more information on possible repairs or replacements. Thank you.

—> Purchase or Repair:
#Advance Industries by Scheele on 2014-11-18 00:25
We experienced downtime with Advance Industries 116220 D 107243-0002 due to a faulty circuit board at 1030 pm last night. Need a quick resolution before the next shift starts.

—> Purchase or Repair:
#Advance Industries by Thanh on 2009-09-10 02:15
Hi there, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you confirm the pricing and availability for this model? My team recommended reaching out as we are looking to source one quickly. Thank you!

—> Purchase or Repair:
#Advance Industries by Jarod Ballardo on 2009-05-29 07:06
The Advance Industries 116220 D 107243-0002 board is not working as per the shop.

—> Purchase or Repair:
#Advance Industries by bekZitteeGeom on 2006-04-11 19:35
The control board on the Advance Industries 116220-D 107243-0002 is malfunctioning, causing a significant disruption to the production line. Immediate repair or replacement is necessary to resume operations without further delay.

—> Purchase or Repair:
#Advance Industries by Joseph Snow on 2011-01-21 14:15
Need a manual for a 24 volt AC power door opener, in order to hook it up

—> Purchase or Repair:
#Advance Industries by McSpadden on 2009-11-17 20:23
I'm sorry, but something seems to be off with the Advance Industries 116220 D 107243-0002 board. It appears to have stopped working properly.

—> Purchase or Repair:
#Advance Industries by Raskar on 2009-11-10 01:23
Board 107243-0002 in Advanced Industries 116220 D just failed. Need to swap it out ASAP to keep the equipment running.

—> Purchase or Repair:
#Advance Industries by Laura Phipps on 2009-03-09 20:11
My Advance Industries 116220 D 107243-0002 board is not functioning properly and needs repair as soon as possible to prevent any production delays. Looking for a skilled technician who can troubleshoot and fix the issue

—> Purchase or Repair:
#Advance Industries by Susnjevic on 2009-07-28 15:42
I'm currently facing an issue with the Advance Industries 116220 D 107243-0002. It seems like there's a problem with the board, causing the machine to stop working properly. I will need to investigate further to determine the exact nature of the issue.

—> Purchase or Repair:
#Advance Industries by Ron on 2009-08-21 11:38
Hello, I'm reaching out to inquire about repair information for an Advance Industries 116220 D 107243-0002 board that has stopped working. Could you provide details on how we can repair or replace it quickly? Thank you.

—> Purchase or Repair:
#Advance Industries by RAEMISCH on 2009-07-22 21:46
Advance Industries 116220 D 107243-0002 is displaying error code E345. Equipment is not powering on. Need immediate assistance to troubleshoot and resume operations.

—> Purchase or Repair:
#Advance Industries by RS on 2009-12-26 00:04
I will reach out to Advance Industries regarding the Advance Industries 116220 D 107243-0002 board to inquire about support and parts availability.

—> Purchase or Repair:
#Advance Industries by Donald Fellwock on 2009-02-07 12:25
The Advance Industries 116220 D 107243-0002 board malfunctioned today during the afternoon shift, causing significant downtime. Can you please provide a quick explanation of what might have caused the issue before the next shift begins? Thank you.

—> Purchase or Repair:
#Advance Industries by Howard O Line on 2009-05-15 13:24
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by aziz fayek aziz on 2009-10-20 12:32
Issue The Advance Industries 116220 D 107243-0002 board is not powering on.

—> Purchase or Repair:
#Advance Industries by Steven Lorke on 2014-06-27 21:50
Machine is not powering on.

—> Purchase or Repair:
#Advance Industries by Juergen.Arpe on 2009-12-29 13:17
I've noticed an issue with the Advance Industries 116220 D 107243-0002. It seems like something on the board has stopped working, but I'm not entirely sure what it does. I will report it to the appropriate department for further investigation.

—> Purchase or Repair:
#Advance Industries by Davette on 2014-05-06 16:20
The Advance Industries 116220 D 107243-0002 unit is not working.

—> Purchase or Repair:
#Advance Industries by Canna on 2014-05-04 10:20
I'm reaching out on behalf of a client who needs assistance with an Advance Industries 116220 D 107243-0002 circuit board. Can you provide details on repair options and costs for this item? Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.