Advance Industries Service & Repair Forum

We experienced unexpected downtime with the Advance Industries 116220 D 107243-0002 board last night at 1000 pm. Please investigate and provide feedback urgently.

—> Purchase or Repair: Ticket Image

— Posted by Pertijs on 2009-11-24

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Dave Mitton on 2009-10-16 17:31
Do you have any Advance Industries 116220 D 107243-0002 boards available for sale or repair to keep production running?

—> Purchase or Repair:
#Advance Industries by Adlen on 2009-03-21 19:21
We are experiencing a critical failure in the circuit board of the Advance Industries 116220 D 107243-0002 equipment. Production has come to a halt and we require immediate repair service to get the line running again. Please prioritize this issue.

—> Purchase or Repair:
#Advance Industries by nagarajan.g on 2009-03-09 12:11
Board on Advance Industries 116220 D 107243-0002 malfunctioned, needs immediate attention. Will investigate further and report back soon.

—> Purchase or Repair:
#Advance Industries by Waarvik on 2009-03-09 23:11
Hello, I'm inquiring about the Advance Industries 116220 D 107243-0002 board. Can this be repaired or purchased as a replacement? I'm looking to address this as soon as possible. Thank you!

—> Purchase or Repair:
#Advance Industries by Donald Fellwock on 2009-02-07 12:25
The Advance Industries 116220 D 107243-0002 board malfunctioned today during the afternoon shift, causing significant downtime. Can you please provide a quick explanation of what might have caused the issue before the next shift begins? Thank you.

—> Purchase or Repair:
#Advance Industries by Leonce Collins on 2007-01-13 16:23
Need logic board 116220DModel 107243-0002Do you have that availableLeonce Collins504-722-4729

—> Purchase or Repair:
#Advance Industries by Stephen Thompson on 2009-11-06 21:59
Machine producing blank boards, unable to cut components.

—> Purchase or Repair:
#Advance Industries by Marques Cedric on 2014-12-16 22:44
Equipment ID Advance Industries 116220 D 107243-0002Issue Machine not powering up, displaying Error Code 302. Investigation needed ASAP. Please advise on next steps.

—> Purchase or Repair:
#Advance Industries by Savoskin on 2009-11-25 04:52
Need help fixing Advance Industries 116220 D 107243-0002 board. We can't get it to power up, all lights remain off. Send someone ASAP. Thanks!

—> Purchase or Repair:
#Advance Industries by Rotolo on 2006-11-08 21:57
Hi Repair Service Team, the control board on the Advance Industries 116220-D 107243-0002 is malfunctioning, affecting the production line. Please address this issue urgently to resume operations

—> Purchase or Repair:
#Advance Industries by Shem Petersen on 2009-10-27 06:14
The Advance Industries 116220 D 107243-0002 board unit is not functioning properly, please check and repair. Thank you.

—> Purchase or Repair:
#Advance Industries by Derek Baker on 2014-04-02 00:07
The circuit board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a production line disruption. Urgent repair service needed to rectify the issue

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board just failed on machine 5. Need to replace ASAP to avoid downtime.

—> Purchase or Repair:
do you have the light board that plugs into the 116220d timer board

—> Purchase or Repair:
#Advance Industries by Bonnie Briggs on 2021-03-31 20:15
I have 2 remote garage door openers made by Advance Industries, Shelbyville, IN. One works very well. The other was kept in storage and the battery inside leaked and corroded the battery connector. These use a 9-volt battery. The FCC ID number is BSH8YN106546 and the MFG. number is 081587. The Freq.…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Steve Tryon on 2015-07-20 09:20
Hi, our Advance Industries 116220 D 107243-0002 gate control board is displaying error code E7 and the gate is not responding to commands. We need urgent assistance to get this equipment back up and running.

—> Purchase or Repair:
#Advance Industries by bharat patel on 2009-05-25 12:22
Hello, Could you please provide repair information for a malfunctioning Advance Industries 116220 D 107243-0002 board? Any help would be greatly appreciated. Thank you.

—> Purchase or Repair:
#Advance Industries by Mike Johnson on 2009-08-04 11:48
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a production line stoppage. Please address this issue urgently to resume operations.

—> Purchase or Repair:
#Advance Industries by thembani on 2009-03-18 13:39
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-03-22 13:15
I have a touch n\'go remote garage door opener (390-19 mhz) for my overhead door garage opener and it works fine. I would love to get another one. I believe this has a date of 1985 on it and don\'t know if these are still possible to get. Any help? Thank yo

—> Purchase or Repair:
#Advance Industries by Greenlaw on 2009-08-24 14:26
I'm currently experiencing an issue with the Advance Industries 116220 D 107243-0002 board. It seems like something has stopped working, and I'm unsure about what the specific problem is. Your assistance in resolving this would be greatly appreciated.

—> Purchase or Repair:
#Advance Industries by leila on 2009-10-26 13:23
Hello, we have an Advance Industries 116220 D 107243-0002 board that requires repair. Could you please provide us with the repair information as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by Raskar on 2009-11-10 01:23
Board 107243-0002 in Advanced Industries 116220 D just failed. Need to swap it out ASAP to keep the equipment running.

—> Purchase or Repair:
#Advance Industries by julius on 2009-12-05 17:34
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. Urgent action needed for repair to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by orru on 2009-07-18 12:38
Board on Advance Industries 116220 D 107243-0002 malfunctioning. Urgent repair needed to resume production. Line stoppage impacting output. Address immediately to avoid further delays.

—> Purchase or Repair:
#Advance Industries by Israel on 2014-12-12 03:16
I need an immediate update on the status of the Advance Industries 116220 D 107243-0002 circuit board. The unit is still down. Please provide a response

—> Purchase or Repair:
#Advance Industries by Alexandros on 2009-11-19 10:02
Can this Advance Industries 116220 D 107243-0002 board be repaired or replaced? I'm just trying to check this off my to-do list.

—> Purchase or Repair:
#Advance Industries by Fredrick Goll on 2009-07-13 21:44
I have two remotes and a receiver that I believe were made by Advance Industries, Shelbyville, Indiana. One of the remotes works only intermitently. I would like to repair or replace the remote or replace two remotes and the receiver unit on the Overhead Garage Door Opener. The opener works fine.I y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Josef on 2009-11-12 04:34
Hello, do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit is down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by rodriguez on 2009-12-08 15:51
Can the Advance Industries 116220 D 107243-0002 board be repaired or bought? Just trying to check this off my to-do list.

—> Purchase or Repair:
#Advance Industries by danny morales on 2012-04-04 04:00
I have this board in my gate opener and trying to find out how to hook up a coaxial receiver and a owners manual thank you

—> Purchase or Repair:
#Advance Industries by collavet on 2015-07-11 01:32
Gate control board on Advance Industries 116220 D 107243-0002 just failed. Heading to assess and replace it ASAP to minimize downtime.

—> Purchase or Repair:
#Advance Industries by ODonovan on 2009-11-09 14:40
Hi there, I am reaching out on behalf of our client regarding part number 116220 D 107243-0002, which involves a board issue. Can you please provide more information on the repair process and estimated cost? Thank you.

—> Purchase or Repair:
#Advance Industries by Luis Raul Godinez on 2006-11-16 11:57
The Advance Industries 116220-D 107243-0002 is a control board unit that is not functioning.

—> Purchase or Repair:
#Advance Industries by Nicandro on 2009-11-25 22:15
Please provide guidance on whether the Advance Industries 116220 D 107243-0002 board is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Advance Industries by john.gilmore on 2011-10-31 13:04
I purchased a house with a garage door opener made by advance industries . The remote will only work if you have direct line of site with opener. I have put in fresh batteries. It appears to be very old.Any suggestions would be appreciated.Thanks

—> Purchase or Repair:
#Advance Industries by Steve DeLurgio on 2009-03-11 22:11
Hello, can the Advance Industries 116220 D 107243-0002 board be repaired or purchased? I'm trying to resolve this as part of my to-do list. Thank you.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board is not working. That's all we know from the shop.

—> Purchase or Repair:
#Advance Industries by Rodriguez. on 2009-09-10 03:15
Do you have another Advance Industries 116220 D 107243-0002 board available for sale to keep production running? Thank you.

—> Purchase or Repair:
#Advance Industries by berrier on 2009-09-25 02:48
I'm sorry to inform you that something seems to have stopped working with your Advance Industries 116220 D 107243-0002. We're not entirely sure what the issue is, but we are looking into it to get it resolved as soon as possible. Thank you for your patience and understanding.

—> Purchase or Repair:
#Advance Industries by danny morales on 2012-04-04 03:50
I have this board in my gate opener and need to find owner manual or just need to find out how to hook up the coaxial receiver to this board 760 252 9000

—> Purchase or Repair:
#Advance Industries by Joseph Snow on 2011-01-21 14:15
Need a manual for a 24 volt AC power door opener, in order to hook it up

—> Purchase or Repair:
#Advance Industries by Cecilia Lobos on 2009-11-09 13:40
Hello, I hope this message finds you well. I am inquiring about the Advance Industries 116220 D 107243-0002 board. I would like to know if it is possible to have it repaired or if a replacement can be purchased. I am trying to

—> Purchase or Repair:
#Advance Industries by Gaudette on 2009-07-13 09:11
I'm experiencing a problem with the Advance Industries 116220 D 107243-0002 - it seems like the board is malfunctioning. I'm not entirely sure what this model does, but something has definitely stopped working.

—> Purchase or Repair:
#Advance Industries by lajcsi on 2009-12-26 08:17
The board on Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. Urgent repair or replacement is needed to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by Paco on 2009-12-19 18:47
The Advance Industries 116220 D 107243-0002 board is not working as reported.

—> Purchase or Repair:
Experiencing issues with Advance Industries 116220 D 107243-0002 board, not functioning properly. Urgently seeking repair services.

—> Purchase or Repair:
#Advance Industries by Carolyn McCrary on 2009-12-14 06:48
"Unit 116220 D 107243-0002 board failure during night shift. Needs attention ASAP. - Maintenance Crew"

—> Purchase or Repair:
#Advance Industries by Kei Saito on 2005-12-09 21:47
The Advance Industries 116220D logic timer board with model number 107243-0002 is behaving unexpectedly. It is not operating as usual and displaying strange characteristics. Please investigate the issue further to determine the cause of the abnormal behavior.

—> Purchase or Repair:
#Advance Industries by Josue Canaves on 2009-03-09 15:11
Advance Industries 116220 D 107243-0002 is showing error code E005 and is not responding to touch commands. Please advise on possible troubleshooting steps. Thank you.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.