Advance Industries Service & Repair Forum

Please provide guidance on whether the Advance Industries 116220 D 107243-0002 board is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair: Ticket Image

— Posted by Nicandro on 2009-11-25

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Ethan on 2009-11-20 19:54
The board on our Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in our production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
Experiencing issues with Advance Industries 116220 D 107243-0002 board, not functioning properly. Urgently seeking repair services.

—> Purchase or Repair:
#Advance Industries by troy gowan on 2010-09-16 21:08
I have a overhead garage doors opener. model 100. I am looking for a replacment remot and reciverreciver number is 107224-0014

—> Purchase or Repair:
#Advance Industries by ADNAN HRNJIC on 2014-02-12 18:58
Hi there! Just wanted to bring to your attention that the Advance Industries 116220 D 107243-0002 circuit board malfunctioned earlier today at 330 PM, causing downtime for the production line. Could you please provide insights on what might have caused the issue? Thank you!

—> Purchase or Repair:
#Advance Industries by Joe ODonovan on 2009-01-04 10:39
Hi, the Advance Industries 116220 D 107243-0002 is displaying Error Code 12 and the power indicator light is blinking red. The equipment is not responding to any commands. Please advise on troubleshooting steps or repairs needed. Thank you.

—> Purchase or Repair:
#Advance Industries by MARK J LIFITE on 2009-03-12 03:11
the Advance Industries 116220 D board in unit 107243-0002 is toast. Needs urgent replacement. Sorted it temporarily, but get a new one pronto to avoid further downtime. Cheers!

—> Purchase or Repair:
#Advance Industries by Ray Hellmann on 2014-05-02 18:20
The Advance Industries 116220 D 107243-0002 circuit board is not working.

—> Purchase or Repair:
#Advance Industries by Jeremiah Albright on 2009-09-03 07:12
Hello, the Advance Industries 116220 D 107243-0002 is currently down. The display is showing Error Code 4 and there is a constant alarm going off. Please advise on potential causes and next steps for repair. Thank you.

—> Purchase or Repair:
#Advance Industries by fahtom on 2009-10-19 14:22
The Advance Industries 116220 D 107243-0002 is showing error code E345 and is not starting up properly. Please advise on troubleshooting steps ASAP.

—> Purchase or Repair:
#Advance Industries by Joseph Snow on 2011-01-21 14:15
Need a manual for a 24 volt AC power door opener, in order to hook it up

—> Purchase or Repair:
#Advance Industries by Donald Marcotte on 2013-01-21 16:15
I am looking for a circuit board Advanced Industries model No. 116220 D P/N 107243-0002 LOGIC TIMER

—> Purchase or Repair:
#Advance Industries by monty clifcorn on 2014-09-23 23:23
The tag over three box relays says MFD. ADVANCE INDUSTRIES, APPLETON, WIS. with the controller model no. tagged on the circuit board. I may need a new board or repair to the board. One of the relays continues a slow click as long as the opener is plugged in to power. Please advise. Thanks.—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Mitch on 2015-03-31 15:34
Contact me if you still need themMiMarch 31 2015

—> Purchase or Repair:
#Advance Industries by Thanh on 2009-09-10 02:15
Hi there, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you confirm the pricing and availability for this model? My team recommended reaching out as we are looking to source one quickly. Thank you!

—> Purchase or Repair:
#Advance Industries by MARTIN Alain on 2015-08-06 09:20
Gate Control Board on 116220 D 107243-0002 failed, needs immediate replacement. Proceeding to next machine for scheduled inspection.

—> Purchase or Repair:
#Advance Industries by mangesh shanbhag on 2009-10-20 19:32
The Advance Industries 116220 D 107243-0002 board is not working as reported.

—> Purchase or Repair:
#Advance Industries by Burhanettin SEN on 2009-12-18 19:06
The board for the Advance Industries 116220 D 107243-0002 unit is exhibiting unexpected behavior. It is not functioning as it typically does.

—> Purchase or Repair:
#Advance Industries by Howard O Line on 2009-05-15 13:24
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by Jacky on 2009-03-29 04:00
I would like to inquire if you have an Advance Industries 116220 D 107243-0002 board available for purchase or repair. Thank you.

—> Purchase or Repair:
#Advance Industries by leila on 2009-10-26 13:23
Hello, we have an Advance Industries 116220 D 107243-0002 board that requires repair. Could you please provide us with the repair information as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by Hasan Ahmed Syed on 2006-10-26 23:27
The control board (116220-D 107243-0002) on the production line is malfunctioning, causing disruptions and delays. Immediate repair service is needed to restore full production capacity.

—> Purchase or Repair:
#Advance Industries by Bonnie Pierson on 2009-08-19 20:31
The Advance Industries 116220 D 107243-0002 board is not functioning and needs attention from the maintenance team.

—> Purchase or Repair:
#Advance Industries by shathi on 2009-10-23 11:15
I'm currently experiencing a problem with the Advance Industries 116220 D 107243-0002 machine. It seems that something stopped working and I'm not quite sure what the issue is. Any help or guidance you could provide would be greatly appreciated.

—> Purchase or Repair:
#Advance Industries by Nathan Franco on 2009-08-20 21:45
Hi, we are inquiring about part number 116220 D 107243-0002 for Advance Industries. The component is described as a board. Could you provide details on its repair availability and estimated turnaround time? Thank you.

—> Purchase or Repair:
#Advance Industries by berrier on 2009-09-25 02:48
I'm sorry to inform you that something seems to have stopped working with your Advance Industries 116220 D 107243-0002. We're not entirely sure what the issue is, but we are looking into it to get it resolved as soon as possible. Thank you for your patience and understanding.

—> Purchase or Repair:
#Advance Industries by bekZitteeGeom on 2006-04-11 19:35
The control board on the Advance Industries 116220-D 107243-0002 is malfunctioning, causing a significant disruption to the production line. Immediate repair or replacement is necessary to resume operations without further delay.

—> Purchase or Repair:
#Advance Industries by Paul Leland on 2009-07-02 00:20
We have the circuit board listed above in our gate operator and the manual timing wheel on the board seems to be eradic as I put it to min. and the gate stays open approx 9 minutes. Before I played with it today, the gate would stay all the way open for 1 1/2 seconds before closing.Any suggestions?—…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by j williams on 2005-12-28 08:12
Advance Industries 116220D 107243-0002 logic timer board malfunctioning, halting production line. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by Stephen Thompson on 2009-11-06 21:59
Machine producing blank boards, unable to cut components.

—> Purchase or Repair:
#Advance Industries by Steven Lorke on 2014-06-27 21:50
Machine is not powering on.

—> Purchase or Repair:
#Advance Industries by Toniolli on 2009-03-09 18:49
The Advance Industries 116220 D 107243-0002 board is not functioning normally. It is displaying unusual behavior and not performing its regular functions.

—> Purchase or Repair:
#Advance Industries by furqan on 2009-12-07 14:18
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in our warehouse. It is not performing its usual functions.

—> Purchase or Repair:
#Advance Industries by Cases on 2009-02-01 15:49
Hello, I am reaching out on behalf of my client regarding part number 116220 D 107243-0002 from Advance Industries. The description of the issue is related to the board. Could you please provide information on repair services available for this part? Thank you.

—> Purchase or Repair:
#Advance Industries by Afonso Lemos on 2015-07-24 10:20
I suggest sending this message to the manufacturer "Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 Gate Control Board. Our team is looking for information on whether this unit is still supported or if replacement parts are available. Could you please provide some guidance on…Purchase or Repair: Ticket Image...
Show More
The Advance Industries 116220 D 107243-0002 board is not working. That's all we know from the shop.

—> Purchase or Repair:
#Advance Industries by virenderm mudgil on 2015-08-12 16:20
Could you please provide information on whether the Advance Industries 116220 D 107243-0002 Gate Control Board is still supported or if replacement parts are available?

—> Purchase or Repair:
#Advance Industries by Mike Johnson on 2009-08-04 11:48
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a production line stoppage. Please address this issue urgently to resume operations.

—> Purchase or Repair:
#Advance Industries by Paco on 2009-12-19 18:47
The Advance Industries 116220 D 107243-0002 board is not working as reported.

—> Purchase or Repair:
#Advance Industries by Russell Diaz on 2009-05-06 18:25
I work for Overhead Door Company of Las Cruces and we have the logic timer board in stock, but nobody hear seems to know what it goes into. We assume it\'s for a gate operator but we don\'t lnow which model> I believe it maybe for several different models.Can you help?Thanks

—> Purchase or Repair:
#Advance Industries by Donald Fellwock on 2009-02-07 12:25
The Advance Industries 116220 D 107243-0002 board malfunctioned today during the afternoon shift, causing significant downtime. Can you please provide a quick explanation of what might have caused the issue before the next shift begins? Thank you.

—> Purchase or Repair:
#Advance Industries by HESAM on 2009-08-13 05:45
Hello, I need someone to repair my Advance Industries 116220 D 107243-0002 board. It's malfunctioning and affecting our production. Your urgent attention is greatly appreciated.

—> Purchase or Repair:
#Advance Industries by fodewhondople on 2009-11-15 03:37
The Advance Industries 116220 D 107243-0002 unit is still down. Please reply and update me on the status.

—> Purchase or Repair:
#Advance Industries by lajcsi on 2009-12-26 08:17
The board on Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. Urgent repair or replacement is needed to resume operations immediately.

—> Purchase or Repair:
Advance Industries 116220 D 107243-0002 board went down mid-shift. Need someone to follow up during the day.

—> Purchase or Repair:
#Advance Industries by Fredrick Goll on 2009-07-13 21:44
I have two remotes and a receiver that I believe were made by Advance Industries, Shelbyville, Indiana. One of the remotes works only intermitently. I would like to repair or replace the remote or replace two remotes and the receiver unit on the Overhead Garage Door Opener. The opener works fine.I y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by John D on 2020-08-30 20:28
I have an Overhead Garage Door Opener Model 100. I am looking for a replacement receiver P/N 107224-0014.

—> Purchase or Repair:
#Advance Industries by naden on 2009-08-14 20:50
Looking for repair on Advance Industries 116220 D 107243-0002 board. Currently not functioning or powering up. Need someone to diagnose and fix the issue

—> Purchase or Repair:
#Advance Industries by Tchatchui on 2006-06-22 14:29
Advance Industries 116220-D 107243-0002 control board malfunctioning, affecting production line speed and accuracy. Immediate repair required to resume operations.

—> Purchase or Repair:
#Advance Industries by nardini on 2009-10-05 07:41
The Advance Industries 116220 D 107243-0002 board malfunctioned earlier today, causing significant downtime in the production. This occurred at 1030 AM, disrupting our operations. I need a quick resolution or workaround before the next shift starts. Thank you.

—> Purchase or Repair:
#Advance Industries by sazib on 2009-10-19 13:22
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair? Our unit is down and we need to keep production running.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.