Advance Industries Service & Repair Forum

I have 2 remote garage door openers made by Advance Industries, Shelbyville, IN. One works very well. The other was kept in storage and the battery inside leaked and corroded the battery connector. These use a 9-volt battery. The FCC ID number is BSH8YN106546 and the MFG. number is 081587. The Freq. number is 380-BBD. I need to have this garage door opener either repaired or replaced. Please advise.Thank you so much

—> Purchase or Repair: Ticket Image

— Posted by Bonnie Briggs on 2021-03-31

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Premanku on 2015-07-28 02:20
the Advance Industries 116220 D 107243-0002 gate control board is down. Needs immediate attention tomorrow. - Night Shift Maintenance Crew

—> Purchase or Repair:
#Advance Industries by Helvie on 2009-12-04 02:00
Please advise if the Advance Industries 116220 D 107243-0002 board is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Advance Industries by Sandra Contreras on 2009-12-11 02:24
Hello, I hope you're doing well. I was asked to get the Advance Industries 116220 D 107243-0002 board fixed or replaced. Before making a decision, may I know if it's possible to repair this board or if it needs to be purchased new? I'm trying to get this resolved as soon as possible. Thank you for y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Dumangas on 2009-03-18 01:00
I'm facing a problem with the Advance Industries 116220 D 107243-0002 board. It seems that something has stopped working, but I'm not exactly sure what the issue is. I will need to investigate further to determine the cause of the malfunction.

—> Purchase or Repair:
#Advance Industries by Mike Johnson on 2009-08-04 11:48
The board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a production line stoppage. Please address this issue urgently to resume operations.

—> Purchase or Repair:
#Advance Industries by WILLIAMSON on 2009-01-26 16:35
The board for the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need urgent repair service to resolve the issue and get the production line running smoothly again.

—> Purchase or Repair:
#Advance Industries by Dennis Sytsma on 2010-11-10 22:38
I need repair or replacement information regarding COPS board for the R-200 PN # 108939-0001 and other part numbers. Made by McKinney electronics for residential slide gate operator. Orginial part number was 940036-2 that came in a box marked overhead door company with no address. I purchased this s…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Donald Marcotte on 2013-01-21 16:15
I am looking for a circuit board Advanced Industries model No. 116220 D P/N 107243-0002 LOGIC TIMER

—> Purchase or Repair:
#Advance Industries by Paul Leland on 2009-07-02 00:20
We have the circuit board listed above in our gate operator and the manual timing wheel on the board seems to be eradic as I put it to min. and the gate stays open approx 9 minutes. Before I played with it today, the gate would stay all the way open for 1 1/2 seconds before closing.Any suggestions?—…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by john.gilmore on 2011-10-31 13:04
I purchased a house with a garage door opener made by advance industries . The remote will only work if you have direct line of site with opener. I have put in fresh batteries. It appears to be very old.Any suggestions would be appreciated.Thanks

—> Purchase or Repair:
#Advance Industries by Davette on 2014-05-06 16:20
The Advance Industries 116220 D 107243-0002 unit is not working.

—> Purchase or Repair:
#Advance Industries by naden on 2009-08-14 20:50
Looking for repair on Advance Industries 116220 D 107243-0002 board. Currently not functioning or powering up. Need someone to diagnose and fix the issue

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-04-02 13:14
I am looking for another or a replacement for the Touch n go (390-19mhz) remote that I now have. As far as I can tell it was from 1985 and is analog. It is for my \"Overhead Door\" garage door opener from the early 1970\'s. I would love to get another one for my wifes car. Thank you—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Guibord on 2015-08-07 12:20
The Advance Industries 116220 D 107243-0002 gate control board is not functioning correctly.

—> Purchase or Repair:
#Advance Industries by rodriguez on 2009-12-08 15:51
Can the Advance Industries 116220 D 107243-0002 board be repaired or bought? Just trying to check this off my to-do list.

—> Purchase or Repair:
#Advance Industries by ADNAN HRNJIC on 2014-02-12 18:58
Hi there! Just wanted to bring to your attention that the Advance Industries 116220 D 107243-0002 circuit board malfunctioned earlier today at 330 PM, causing downtime for the production line. Could you please provide insights on what might have caused the issue? Thank you!

—> Purchase or Repair:
#Advance Industries by Scheele on 2014-11-18 00:25
We experienced downtime with Advance Industries 116220 D 107243-0002 due to a faulty circuit board at 1030 pm last night. Need a quick resolution before the next shift starts.

—> Purchase or Repair:
#Advance Industries by NIKHIL DOSHI on 2009-10-18 18:47
Hi there, I hope this message finds you well. We have an Advance Industries 116220 D 107243-0002 board that we're looking to find a replacement or repair option for. This unit is older, and we're unsure if it's still supported or if parts are still available for it. Could you please let us know if s…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Dave Mitton on 2009-10-16 17:31
Do you have any Advance Industries 116220 D 107243-0002 boards available for sale or repair to keep production running?

—> Purchase or Repair:
#Advance Industries by Tchatchui on 2006-06-22 14:29
Advance Industries 116220-D 107243-0002 control board malfunctioning, affecting production line speed and accuracy. Immediate repair required to resume operations.

—> Purchase or Repair:
#Advance Industries by Derek Baker on 2014-04-02 00:07
The circuit board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a production line disruption. Urgent repair service needed to rectify the issue

—> Purchase or Repair:
#Advance Industries by McSpadden on 2009-11-17 20:23
I'm sorry, but something seems to be off with the Advance Industries 116220 D 107243-0002 board. It appears to have stopped working properly.

—> Purchase or Repair:
#Advance Industries by Joe ODonovan on 2009-01-04 10:39
Hi, the Advance Industries 116220 D 107243-0002 is displaying Error Code 12 and the power indicator light is blinking red. The equipment is not responding to any commands. Please advise on troubleshooting steps or repairs needed. Thank you.

—> Purchase or Repair:
#Advance Industries by Palmer Rodgers on 2009-06-12 20:28
Hey there, can you provide repair info for Advance Industries 116220 D 107243-0002 circuit board? It stopped working and we need a replacement or repair solution urgently. Thank you for your

—> Purchase or Repair:
#Advance Industries by bahat on 2009-11-15 01:37
Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 board. Could you please let me know if it can be repaired or if a replacement can be purchased? I am trying to

—> Purchase or Repair:
#Advance Industries by Leonce Collins on 2007-01-13 16:23
Need logic board 116220DModel 107243-0002Do you have that availableLeonce Collins504-722-4729

—> Purchase or Repair:
#Advance Industries by Chu on 2009-02-23 05:06
Hello, I represent a client who is experiencing some issues with an Advance Industries 116220 D 107243-0002 board. Could you please provide some information on potential repair options and costs for this specific part?Thank you.

—> Purchase or Repair:
#Advance Industries by collavet on 2015-07-11 01:32
Gate control board on Advance Industries 116220 D 107243-0002 just failed. Heading to assess and replace it ASAP to minimize downtime.

—> Purchase or Repair:
#Advance Industries by Cases on 2009-02-01 15:49
Hello, I am reaching out on behalf of my client regarding part number 116220 D 107243-0002 from Advance Industries. The description of the issue is related to the board. Could you please provide information on repair services available for this part? Thank you.

—> Purchase or Repair:
#Advance Industries by Ikerman on 2009-03-11 13:11
Hello, I'm interested in purchasing an Advance Industries 116220 D 107243-0002 board. Could you please provide information on pricing and availability? We are looking to source one quickly. Thank you.

—> Purchase or Repair:
#Advance Industries by Monroe Dodd on 2009-03-17 19:53
Hey, a unit went down mid-shift. Issue with Advance Industries 116220 D 107243-0002 board. Need to check and fix it ASAP.

—> Purchase or Repair:
#Advance Industries by dennis yost on 2013-12-27 15:43
i need to replace 1 black box for a horton opener brand name - Horton easy access number on the board inside box - 107846-0001 Freq - 360 Mfg - 92 48 Fcc Id: BSH8YN107846Unable to find item on Google or EbayIs it still available? thanks dennis

—> Purchase or Repair:
#Advance Industries by Israel on 2014-12-12 03:16
I need an immediate update on the status of the Advance Industries 116220 D 107243-0002 circuit board. The unit is still down. Please provide a response

—> Purchase or Repair:
#Advance Industries by Rajneesh on 2009-01-24 03:59
The Advance Industries 116220 D 107243-0002 board is showing error code E23 and is not responding to any commands. Need urgent assistance to troubleshoot and fix the issue. Thank you.

—> Purchase or Repair:
#Advance Industries by Fred H Black on 2009-08-31 13:26
Drive or board (116220 D 107243-0002) failed in machine. Heading to assess issue now.

—> Purchase or Repair:
#Advance Industries by Juergen.Arpe on 2009-12-29 13:17
I've noticed an issue with the Advance Industries 116220 D 107243-0002. It seems like something on the board has stopped working, but I'm not entirely sure what it does. I will report it to the appropriate department for further investigation.

—> Purchase or Repair:
#Advance Industries by Toniolli on 2009-03-09 18:49
The Advance Industries 116220 D 107243-0002 board is not functioning normally. It is displaying unusual behavior and not performing its regular functions.

—> Purchase or Repair:
#Advance Industries by Conrad on 2015-05-15 21:48
Remote control: Crusader Solid State Model 200SS/202SS

—> Purchase or Repair:
#Advance Industries by sutrisno on 2015-07-24 14:43
The Advance Industries 116220 D 107243-0002 Gate Control Board is not working properly.

—> Purchase or Repair:
#Advance Industries by Laura Phipps on 2009-03-09 20:11
My Advance Industries 116220 D 107243-0002 board is not functioning properly and needs repair as soon as possible to prevent any production delays. Looking for a skilled technician who can troubleshoot and fix the issue

—> Purchase or Repair:
#Advance Industries by naeem ahmed on 2009-07-05 20:41
The Advance Industries 116220 D 107243-0002 unit is not functioning correctly. The maintenance team needs assistance with it.

—> Purchase or Repair:
#Advance Industries by aziz fayek aziz on 2009-10-20 12:32
Issue The Advance Industries 116220 D 107243-0002 board is not powering on.

—> Purchase or Repair:
#Advance Industries by Howard O Line on 2009-05-15 13:24
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by daniele on 2009-11-29 14:19
I've noticed that the Advance Industries 116220 D 107243-0002 is experiencing issues seems like something stopped working on the board. It may require further inspection to determine the exact problem.

—> Purchase or Repair:
#Advance Industries by Stacey on 2014-10-17 16:03
Machine 116220 D 107243-0002 is not booting up, displaying "Error Code 34".

—> Purchase or Repair:
#Advance Industries by Shem Petersen on 2009-10-27 06:14
The Advance Industries 116220 D 107243-0002 board unit is not functioning properly, please check and repair. Thank you.

—> Purchase or Repair:
#Advance Industries by Josef on 2009-11-12 04:34
Hello, do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit is down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by J.Y. on 2009-10-14 20:43
The Advance Industries 116220 D 107243-0002 unit is still down. Please provide an update as soon as possible.

—> Purchase or Repair:
#Advance Industries by Michelle Hurley on 2014-01-07 19:22
We experienced downtime with the Advance Industries 116220 D 107243-0002 circuit board earlier today around 230 PM. Can you provide some insight into what might have caused the issue? It's crucial information we need before the next shift begins. Thank you!

—> Purchase or Repair:
#Advance Industries by Mitch on 2015-03-31 15:34
Contact me if you still need themMiMarch 31 2015

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.