Advance Industries Service & Repair Forum

I'm currently facing an issue with the Advance Industries 116220 D 107243-0002. It seems like there's a problem with the board, causing the machine to stop working properly. I will need to investigate further to determine the exact nature of the issue.

—> Purchase or Repair: Ticket Image

— Posted by Susnjevic on 2009-07-28

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Bonnie Briggs on 2021-03-31 20:15
I have 2 remote garage door openers made by Advance Industries, Shelbyville, IN. One works very well. The other was kept in storage and the battery inside leaked and corroded the battery connector. These use a 9-volt battery. The FCC ID number is BSH8YN106546 and the MFG. number is 081587. The Freq.…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by reidar on 2009-08-22 09:23
Hello, I hope this message finds you well. I would like to inquire if the Advance Industries 116220 D 107243-0002 board can be repaired or if a replacement can be purchased. I am trying to

—> Purchase or Repair:
#Advance Industries by Nicandro on 2009-11-25 22:15
Please provide guidance on whether the Advance Industries 116220 D 107243-0002 board is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Advance Industries by Juan Martinez on 2009-12-29 09:17
Do you have an Advance Industries 116220 D 107243-0002 board available for repair or sale? Production is currently down and we need to keep it running. Thank you.

—> Purchase or Repair:
#Advance Industries by farag on 2009-11-09 16:40
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse. The unit is not functioning as expected, behaving strangely.

—> Purchase or Repair:
#Advance Industries by Joe ODonovan on 2009-01-04 10:39
Hi, the Advance Industries 116220 D 107243-0002 is displaying Error Code 12 and the power indicator light is blinking red. The equipment is not responding to any commands. Please advise on troubleshooting steps or repairs needed. Thank you.

—> Purchase or Repair:
#Advance Industries by john.gilmore on 2011-10-31 13:04
I purchased a house with a garage door opener made by advance industries . The remote will only work if you have direct line of site with opener. I have put in fresh batteries. It appears to be very old.Any suggestions would be appreciated.Thanks

—> Purchase or Repair:
#Advance Industries by DeeAnne on 2005-08-30 23:03
Hi,I am in desparate need of a wiring diagram for an Advance industries 116220D board for a Mckinney Electronics operator. We need to add a reflective detector and the board we have does not have a labelled terminal block. We would appreciate any information you might have.Thanks,DeeAnne—> …Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Babur on 2009-11-19 16:31
Machine not powering up.

—> Purchase or Repair:
#Advance Industries by Olga on 2009-12-04 01:00
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair? We need it urgently to keep production running.

—> Purchase or Repair:
#Advance Industries by Temitope Egunjobi on 2014-11-28 17:16
The Advance Industries 116220 D 107243-0002 unit is currently not functioning. Maintenance team is aware and investigating the issue.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board is not working. That's all we know from the shop.

—> Purchase or Repair:
#Advance Industries by Leach on 2014-04-03 17:29
The circuit board in Advance Industries 116220 D 107243-0002 just went out, causing a machine shutdown. Need immediate replacement to keep the line running.

—> Purchase or Repair:
#Advance Industries by Afonso Lemos on 2015-07-24 10:20
I suggest sending this message to the manufacturer "Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 Gate Control Board. Our team is looking for information on whether this unit is still supported or if replacement parts are available. Could you please provide some guidance on…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by david ambler on 2010-09-08 12:31
Remote shows FCC# only the garage door opener is overhead door 450A I would like to find another spare remote.It is medium brown in color with a brown button and an ivory color button .The remote operates 2 doors and has 2 code selection modules one for each door.

—> Purchase or Repair:
#Advance Industries by CrurordVoxy on 2014-02-20 08:00
Experiencing issues with Advance Industries circuit board 116220 D 107243-0002, causing production downtime. Need repair service ASAP to get the industrial unit operational again.

—> Purchase or Repair:
#Advance Industries by Ostermann on 2009-06-24 14:44
The Advance Industries 116220 D 107243-0002 board is not working.

—> Purchase or Repair:
#Advance Industries by Fredrick Goll on 2009-07-13 21:44
I have two remotes and a receiver that I believe were made by Advance Industries, Shelbyville, Indiana. One of the remotes works only intermitently. I would like to repair or replace the remote or replace two remotes and the receiver unit on the Overhead Garage Door Opener. The opener works fine.I y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Marques Cedric on 2014-12-16 22:44
Equipment ID Advance Industries 116220 D 107243-0002Issue Machine not powering up, displaying Error Code 302. Investigation needed ASAP. Please advise on next steps.

—> Purchase or Repair:
Hello, I'm reaching out to inquire about the Advance Industries 116220 D 107243-0002 board. We are looking to determine if this unit is still supported or if replacement parts are available. Thank you.

—> Purchase or Repair:
#Advance Industries by orru on 2009-07-18 12:38
Board on Advance Industries 116220 D 107243-0002 malfunctioning. Urgent repair needed to resume production. Line stoppage impacting output. Address immediately to avoid further delays.

—> Purchase or Repair:
#Advance Industries by Cases on 2009-02-01 15:49
Hello, I am reaching out on behalf of my client regarding part number 116220 D 107243-0002 from Advance Industries. The description of the issue is related to the board. Could you please provide information on repair services available for this part? Thank you.

—> Purchase or Repair:
#Advance Industries by Ray Hellmann on 2014-05-02 18:20
The Advance Industries 116220 D 107243-0002 circuit board is not working.

—> Purchase or Repair:
#Advance Industries by Josef on 2009-11-12 04:34
Hello, do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit is down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by PARDI on 2009-02-13 13:46
the Advance Industries 116220 D board in unit 107243-0002 went down mid-shift. Please check it out and troubleshoot in the morning. Thanks!

—> Purchase or Repair:
#Advance Industries by Steve DeLurgio on 2009-03-11 22:11
Hello, can the Advance Industries 116220 D 107243-0002 board be repaired or purchased? I'm trying to resolve this as part of my to-do list. Thank you.

—> Purchase or Repair:
#Advance Industries by jorge Enriquez on 2015-07-20 23:20
Gate Control Board on Advance Industries 116220 D 107243-0002 just failed. Need replacement ASAP to resume operations.

—> Purchase or Repair:
#Advance Industries by Larry Freeze on 2011-06-13 20:56
Would like information on the purchase of two remote units. The main door remote unit has lable #107224-0002. The other unit was run over by the car and is unavilable. Please send info on how to purchase replacable items . Thank you Larry Freeze 302 Guava Pl Brea, Ca. 92821f

—> Purchase or Repair:
#Advance Industries by PROM on 2009-11-25 02:52
Hi, I am checking off my to-do list and wanted to ask if the Advance Industries 116220 D 107243-0002 board can be repaired or if a new one needs to be purchased? Thank you!

—> Purchase or Repair:
#Advance Industries by Howard on 2009-10-20 17:32
We experienced downtime with the Advance Industries 116220 D 107243-0002 unit today due to a board issue. The incident occurred during the night shift around 1130 PM. Can you provide insights on what might have caused it before the next shift begins?

—> Purchase or Repair:
#Advance Industries by Derek Baker on 2014-04-02 00:07
The circuit board on the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a production line disruption. Urgent repair service needed to rectify the issue

—> Purchase or Repair:
#Advance Industries by mohammed on 2009-06-26 13:28
The unit "Advance Industries 116220 D 107243-0002" is not functioning. Please have a look at it. Thank you.

—> Purchase or Repair:
#Advance Industries by Joseph Conner on 2009-03-11 17:11
Please provide an update on the status of our Advance Industries 116220 D 107243-0002 board. The unit is still down, and we require immediate attention. Your

—> Purchase or Repair:
#Advance Industries by wildbill on 2017-07-26 18:11
The logic timer board was used in the Crusader C-300 and C-350 slide gate operators by McKinney Electronics/Overhead Door. I would be interested in purchasing this board if it is still available and known to be functional. Mine has the same issue as described in the iernc post by David Prevo in Oct.…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Rudy Martens on 2009-12-17 22:53
Machine displaying error code X32 upon startup.

—> Purchase or Repair:
#Advance Industries by Russell Diaz on 2009-05-06 18:25
I work for Overhead Door Company of Las Cruces and we have the logic timer board in stock, but nobody hear seems to know what it goes into. We assume it\'s for a gate operator but we don\'t lnow which model> I believe it maybe for several different models.Can you help?Thanks

—> Purchase or Repair:
#Advance Industries by Lee gregory on 2009-07-23 18:55
Hello, we are in need of repair information for an Advance Industries 116220 D 107243-0002 board. Can you please provide details on how to fix or replace it? Thank you.

—> Purchase or Repair:
#Advance Industries by McSpadden on 2009-11-17 20:23
I'm sorry, but something seems to be off with the Advance Industries 116220 D 107243-0002 board. It appears to have stopped working properly.

—> Purchase or Repair:
#Advance Industries by Jarod Ballardo on 2009-05-29 07:06
The Advance Industries 116220 D 107243-0002 board is not working as per the shop.

—> Purchase or Repair:
#Advance Industries by Hubie Colquitt on 2009-06-14 18:56
Could you please provide repair information for the Advance Industries 116220 D 107243-0002 board? Our team on-site urgently needs to replace it. Thank you.

—> Purchase or Repair:
#Advance Industries by Sylvia laoutas on 2009-03-10 23:11
The unit Advance Industries 116220 D 107243-0002 is exhibiting abnormal behavior in the warehouse. It is not functioning as usual, acting strangely.

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-03-22 13:20
I forgot to mention the model of the door opener is R80-az It is 115volts and 60amps 1/3 hp. There is a separate antenna mod 702 ser#751015 code 390-19 Thank you

—> Purchase or Repair:
#Advance Industries by nagarajan.g on 2009-03-09 12:11
Board on Advance Industries 116220 D 107243-0002 malfunctioned, needs immediate attention. Will investigate further and report back soon.

—> Purchase or Repair:
#Advance Industries by SUSAN on 2009-05-05 04:44
Do you have another Advance Industries 116220 D board available for sale or repair? Production is currently down and we need to keep things running.

—> Purchase or Repair:
#Advance Industries by Beniamin on 2009-12-16 23:16
Board on Advance Industries 116220 D 107243-0002 just went down. Need replacement ASAP to restore operation.

—> Purchase or Repair:
#Advance Industries by JORGE TALERO on 2009-05-25 01:00
Hello, I'm reaching out regarding the Advance Industries 116220 D 107243-0002 board. I was instructed to either repair or replace it, but I'm uncertain of its function. Could you please advise if this item can be repaired or if a new one needs to be purchased? I'm aiming to

—> Purchase or Repair:
#Advance Industries by Bobby Moses jr on 2014-02-14 23:58
Can the Advance Industries 116220 D 107243-0002 circuit board be repaired or bought? I'm trying to check this off my to-do list. Thank you.

—> Purchase or Repair:
#Advance Industries by Israel on 2014-12-12 03:16
I need an immediate update on the status of the Advance Industries 116220 D 107243-0002 circuit board. The unit is still down. Please provide a response

—> Purchase or Repair:
#Advance Industries by Guibord on 2015-08-07 12:20
The Advance Industries 116220 D 107243-0002 gate control board is not functioning correctly.

—> Purchase or Repair:
#Advance Industries by Dennis McCollums on 2009-11-19 17:31
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.