Advance Industries Service & Repair Forum

Board 107243-0002 in Advanced Industries 116220 D just failed. Need to swap it out ASAP to keep the equipment running.

—> Purchase or Repair: Ticket Image

— Posted by Raskar on 2009-11-10

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Advance Industries"

If you need your Advance Industries unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 270 Comments

#Advance Industries by Ethan on 2009-11-20 19:54
The board on our Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in our production line. Please address this issue urgently to minimize downtime.

—> Purchase or Repair:
#Advance Industries by aziz fayek aziz on 2009-10-20 12:32
Issue The Advance Industries 116220 D 107243-0002 board is not powering on.

—> Purchase or Repair:
#Advance Industries by ENGLISH on 2009-03-11 18:11
The Advance Industries 116220 D 107243-0002 board is not functioning properly. Please address the issue

—> Purchase or Repair:
#Advance Industries by Hubie Colquitt on 2009-06-14 18:56
Could you please provide repair information for the Advance Industries 116220 D 107243-0002 board? Our team on-site urgently needs to replace it. Thank you.

—> Purchase or Repair:
#Advance Industries by Dave Mitton on 2009-10-16 17:31
Do you have any Advance Industries 116220 D 107243-0002 boards available for sale or repair to keep production running?

—> Purchase or Repair:
#Advance Industries by wildbill on 2017-07-26 18:11
The logic timer board was used in the Crusader C-300 and C-350 slide gate operators by McKinney Electronics/Overhead Door. I would be interested in purchasing this board if it is still available and known to be functional. Mine has the same issue as described in the iernc post by David Prevo in Oct.…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Stephen Thompson on 2009-11-06 21:59
Machine producing blank boards, unable to cut components.

—> Purchase or Repair:
The Advance Industries 116220 D 107243-0002 board just failed on machine 5. Need to replace ASAP to avoid downtime.

—> Purchase or Repair:
#Advance Industries by aldape on 2014-12-28 14:06
The Advance Industries 116220 D 107243-0002 Circuit Board is not functioning as expected. It is exhibiting irregular behavior that is not in line with its normal operations.

—> Purchase or Repair:
#Advance Industries by Premanku on 2015-07-28 02:20
the Advance Industries 116220 D 107243-0002 gate control board is down. Needs immediate attention tomorrow. - Night Shift Maintenance Crew

—> Purchase or Repair:
#Advance Industries by Josef on 2009-11-12 04:34
Hello, do you have a replacement board available for Advance Industries 116220 D 107243-0002? Our unit is down and we need to keep production running. Thank you.

—> Purchase or Repair:
#Advance Industries by Meglen on 2009-11-28 16:40
Hello, do you have an Advance Industries 116220 D 107243-0002 board available for repair or purchase? Thank you.

—> Purchase or Repair:
#Advance Industries by Afonso Lemos on 2015-07-24 10:20
I suggest sending this message to the manufacturer "Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 Gate Control Board. Our team is looking for information on whether this unit is still supported or if replacement parts are available. Could you please provide some guidance on…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Steven Lorke on 2014-06-27 21:50
Machine is not powering on.

—> Purchase or Repair:
#Advance Industries by collavet on 2015-07-11 01:32
Gate control board on Advance Industries 116220 D 107243-0002 just failed. Heading to assess and replace it ASAP to minimize downtime.

—> Purchase or Repair:
#Advance Industries by JORGE TALERO on 2009-05-25 01:00
Hello, I'm reaching out regarding the Advance Industries 116220 D 107243-0002 board. I was instructed to either repair or replace it, but I'm uncertain of its function. Could you please advise if this item can be repaired or if a new one needs to be purchased? I'm aiming to

—> Purchase or Repair:
#Advance Industries by Sabin on 2009-11-23 23:58
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior in the warehouse. Please provide a description of the abnormal actions you are observing.

—> Purchase or Repair:
#Advance Industries by Ricardo Rivas on 2009-07-29 13:53
The Advance Industries 116220 D 107243-0002 board is showing Error Code 3B. Equipment not powering on properly. Need urgent repair.

—> Purchase or Repair:
#Advance Industries by bekZitteeGeom on 2006-04-11 19:35
The control board on the Advance Industries 116220-D 107243-0002 is malfunctioning, causing a significant disruption to the production line. Immediate repair or replacement is necessary to resume operations without further delay.

—> Purchase or Repair:
#Advance Industries by virenderm mudgil on 2015-08-12 16:20
Could you please provide information on whether the Advance Industries 116220 D 107243-0002 Gate Control Board is still supported or if replacement parts are available?

—> Purchase or Repair:
#Advance Industries by Nikita on 2009-06-27 12:07
Hello, we have an issue with the Advance Industries 116220 D 107243-0002 board. Could you please provide repair information or a replacement as soon as possible? Thank you.

—> Purchase or Repair:
Experiencing issues with Advance Industries 116220 D 107243-0002 board, not functioning properly. Urgently seeking repair services.

—> Purchase or Repair:
#Advance Industries by Strube on 2009-12-24 12:33
Do you have a board available for Advance Industries 116220 D 107243-0002? Our unit is down, and we need to keep production running.

—> Purchase or Repair:
#Advance Industries by Scheele on 2014-11-18 00:25
We experienced downtime with Advance Industries 116220 D 107243-0002 due to a faulty circuit board at 1030 pm last night. Need a quick resolution before the next shift starts.

—> Purchase or Repair:
#Advance Industries by WILLIAMSON on 2009-01-26 16:35
The board for the Advance Industries 116220 D 107243-0002 is malfunctioning, causing a halt in production. We need urgent repair service to resolve the issue and get the production line running smoothly again.

—> Purchase or Repair:
#Advance Industries by Genoa on 2015-07-25 09:20
Hello, I'm inquiring about part number 116220 D 107243-0002, which is a Gate Control Board for Advance Industries. My client is experiencing some issues with this particular part and would like to get more information on repair options. Thank you.

—> Purchase or Repair:
#Advance Industries by j williams on 2005-12-28 08:12
Advance Industries 116220D 107243-0002 logic timer board malfunctioning, halting production line. Urgent repair needed to resume operations immediately.

—> Purchase or Repair:
#Advance Industries by sumesh on 2009-07-19 20:15
Hello, I am inquiring about the Advance Industries 116220 D 107243-0002 board. I was told to get this fixed or replaced, but I'm not sure what it does. Can this board be repaired or purchased as a replacement? I'm looking to check this off my to-do list. Thank you.

—> Purchase or Repair:
#Advance Industries by Fredrick Goll on 2009-07-13 21:44
I have two remotes and a receiver that I believe were made by Advance Industries, Shelbyville, Indiana. One of the remotes works only intermitently. I would like to repair or replace the remote or replace two remotes and the receiver unit on the Overhead Garage Door Opener. The opener works fine.I y…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Mr.Simon on 2015-07-30 16:20
Can the Advance Industries 116220 D 107243-0002 Gate Control Board be repaired or bought? I'm trying to check this off my to-do list.

—> Purchase or Repair:
#Advance Industries by art on 2009-03-10 21:11
I'm currently experiencing an issue with the Advance Industries 116220 D 107243-0002 machine. It appears that the board may not be functioning properly as something has stopped working. I will need assistance to diagnose and resolve this issue as soon as possible.

—> Purchase or Repair:
#Advance Industries by GEORGE SUTTON on 2009-02-23 12:04
The Advance Industries 116220 D 107243-0002 board is exhibiting unusual behavior - it is not functioning as it normally does.

—> Purchase or Repair:
#Advance Industries by danny morales on 2012-04-04 04:00
I have this board in my gate opener and trying to find out how to hook up a coaxial receiver and a owners manual thank you

—> Purchase or Repair:
#Advance Industries by tukaram on 2009-08-31 10:26
Hello, I am in need of repair info for an Advance Industries 116220 D 107243-0002 board. Can you please provide details on how to get this fixed? Thank you.
—> See more:

—> Purchase or Repair:
#Advance Industries by Jen Massey on 2014-05-02 10:20
Could you please confirm if the Advance Industries 116220 D 107243-0002 circuit board is still supported or if replacement parts are available for it? Thank you.

—> Purchase or Repair:
#Advance Industries by Peter Komrhel on 2009-11-25 17:15
Hello, we are in need of repair information for the Advance Industries 116220 D 107243-0002 board. Could you please provide us with details on how we can get this fixed as soon as possible? Thank you.

—> Purchase or Repair:
#Advance Industries by Gordon Truex on 2014-03-28 13:52
Can you tell me if it is possible to get a replacement remote for a Touch n Go remote I purchaced in 1985. It is coded 390-19. there is an antenna model 702, ser#751015 if that helps. also the door opener is a model R80-az. Thank you

—> Purchase or Repair:
#Advance Industries by Ron on 2009-08-21 11:38
Hello, I'm reaching out to inquire about repair information for an Advance Industries 116220 D 107243-0002 board that has stopped working. Could you provide details on how we can repair or replace it quickly? Thank you.

—> Purchase or Repair:
#Advance Industries by naeem ahmed on 2009-07-05 20:41
The Advance Industries 116220 D 107243-0002 unit is not functioning correctly. The maintenance team needs assistance with it.

—> Purchase or Repair:
#Advance Industries by Michelle Hurley on 2014-01-07 19:22
We experienced downtime with the Advance Industries 116220 D 107243-0002 circuit board earlier today around 230 PM. Can you provide some insight into what might have caused the issue? It's crucial information we need before the next shift begins. Thank you!

—> Purchase or Repair:
#Advance Industries by Adlen on 2009-03-21 19:21
We are experiencing a critical failure in the circuit board of the Advance Industries 116220 D 107243-0002 equipment. Production has come to a halt and we require immediate repair service to get the line running again. Please prioritize this issue.

—> Purchase or Repair:
#Advance Industries by Chu on 2009-02-23 05:06
Hello, I represent a client who is experiencing some issues with an Advance Industries 116220 D 107243-0002 board. Could you please provide some information on potential repair options and costs for this specific part?Thank you.

—> Purchase or Repair:
#Advance Industries by Gaudette on 2009-07-13 09:11
I'm experiencing a problem with the Advance Industries 116220 D 107243-0002 - it seems like the board is malfunctioning. I'm not entirely sure what this model does, but something has definitely stopped working.

—> Purchase or Repair:
#Advance Industries by nevardo vera on 2005-10-27 01:00
Advance Industries 116220D 107243-0002 logic timer board is malfunctioning, causing a disruption in the production line. Need urgent repair to resume operations

—> Purchase or Repair:
#Advance Industries by Weir on 2009-09-02 19:21
Please prioritize addressing the malfunction on the Advance Industries 116220 D 107243-0002 board as it's significantly impacting our production line. Your urgent attention to this matter is required to resume operations

—> Purchase or Repair:
#Advance Industries by Cabrera on 2009-11-15 14:18
Could you please confirm if the Advance Industries 116220 D 107243-0002 board is still supported by the manufacturer or if replacement parts are available for repair? Thank you.

—> Purchase or Repair:
#Advance Industries by vu on 2009-12-31 18:48
Hello, I hope this message finds you well. I am reaching out regarding the Advance Industries 116220 D 107243-0002 board. Our team is looking to locate a replacement or repair option for this unit. Since it is older and we are unsure of the manufacturer, could you please confirm if this unit is stil…Purchase or Repair: Ticket Image...
Show More
#Advance Industries by Stalzer on 2009-07-27 04:35
The Advance Industries 116220 D 107243-0002 board unit is not working properly. Maintenance team needs to check and repair it.

—> Purchase or Repair:
#Advance Industries by Carmona on 2009-10-26 12:23
Do you have an Advance Industries 116220 D 107243-0002 board available for sale or repair? Production is down and we need a replacement urgently. Thank you.

—> Purchase or Repair:
#Advance Industries by Jarod Ballardo on 2009-05-29 07:06
The Advance Industries 116220 D 107243-0002 board is not working as per the shop.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.