E for Service call 1-336-969-0110 at Industrial Electronics Repair

E Service & Repair Forum

If you need your E tested or repaired then give us a call. We offer free estimates and offer extended warranties. You can contact us at 1-(336)-969-0110 Shipping/Receiving Industrial Electronic Repair 931-E S. Main St #204, Kernersville, NC 27284 Phone: (336) 969-0110 We repair industrial electronic devices If you have an industrial electronic device that needs repair, Feel free to contact us!

— Posted by Sales on 2005-05-09

Reply🗨️Ask a New Question Below❓

If you need your E unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 1340 Comments

#Elektronikon by radu munteanu on 2008-02-20 18:57

The Elektronikon 1900-0590-16 is a master control module that is currently not working. The maintenance team is looking into the issue.

—> Purchase or Repair:

#Elektronikon by Maritza Nempeque R. on 2015-07-26 16:20

Hey team, Elektronikon Control Unit on unit 1900 0700 07 is down. Needs immediate attention when day shift starts. Thanks!

—> Purchase or Repair:

#Excellon Automation by sergio rojas on 2009-12-18 17:04

Dear Sir/Madam,Iv\'e lost my \"Excellone CNC-6 with EX-300 D/R\" Operating System and Softwarehow can i purchase or download this?HELP

—> Purchase or Repair:

#Electro by immisteinvits on 2015-09-27 00:00

The Electro Cam Corp ps-5024-10-m09-c-l-r is displaying error code E24 and is not responding to inputs. Your immediate attention is required to diagnose and repair the issue. Thank you for your

—> Purchase or Repair:

#Elektronikon by Tom Doylend on 2008-01-08 00:02

Hello, I'm interested in purchasing an Elektronikon 1900 0710 32 controller. Could you please provide information on pricing and availability? I'm looking to source one quickly. Thank you.

—> Purchase or Repair:

#ESR by Dees on 2007-04-04 14:56

Are you able to repair or provide another ESR TrioDrive 6622-3936 servo power module for us to keep production running smoothly? Thank you.

—> Purchase or Repair:

#Elektronikon by DSOUZA on 2008-02-24 12:52

The Elektronikon 1900 0710 32 controller is malfunctioning, causing a critical halt in production. Urgent attention is required to diagnose and resolve this issue

—> Purchase or Repair:

#Elektronikon by Mitchell Vavra on 2009-05-13 19:54

Hey team, the Elektronikon Atlas Copco 1900070008 digital readout on one unit went down mid-shift. Needs to be checked first thing tomorrow. Cheers!

—> Purchase or Repair:

#Elektronikon by Richard Williams on 2009-06-10 21:44

Please provide information and repair options for Elektronikon Atlas Copco part number 1900070008 with a digital readout issue. Thank you.

—> Purchase or Repair:

#ELF by Bat on 2011-10-09 03:28

Hello, I'm interested in purchasing the ELF 500100 0001-12 Dolphin Control Systems unit. Can you please provide information on pricing and availability? We are hoping to source one quickly. Thank you.

—> Purchase or Repair:

#Elekronikon II by Davette on 2015-08-10 11:20

Hello, I have a client with an Elekronikon II Atlas Copco part number 1900 0710 12 that is experiencing some issues. Can you please provide more information on how to troubleshoot and repair this controller? Thank you.

—> Purchase or Repair:

#Elektronikon by William Douglas Smith on 2008-01-15 17:35

Looking for repair for Elektronikon 1900 0701 24 controller. Unit not functioning as expected, need assistance with repair. Please advise availability for technician to resolve issue.

—> Purchase or Repair:

#Elektronikon by Shiong on 2015-07-09 11:32

The Elektronikon Atlas Copco 1900 0700 07 unit is not working.

—> Purchase or Repair:

#Elektronikon by Amaechi on 2010-02-15 19:03

Hey there, we need repair info for an Elektronikon Atlas Copco 1900 0700 07 controller that's not working. Can you please send us the details ASAP? Thanks!

—> Purchase or Repair:

#Elektronikon by wengxinpbva on 2009-10-16 15:31

Could you please confirm if the Elektronikon Atlas Copco 1900070008 digital readout unit is still supported or if replacement parts are available for this older unit? Thank you.

—> Purchase or Repair:

#Elektronikon by SELF on 2013-06-07 21:40

The Elektronikon Atlas Copco 1900070007 controller unit isn't working.

—> Purchase or Repair:

#Electro scientific industries by GARTZKE on 2013-07-18 01:44

The power supply on the Electro Scientific Industries 65-61839 is malfunctioning, causing a halt in production. Urgent repair service needed to resolve the issue

—> Purchase or Repair:

#Etasis by Carlos Reyes on 2011-05-19 16:41

Experiencing power issues with Etasis IFRP-352 9272CPSU-0011 industrial unit. Need repair service ASAP.

—> Purchase or Repair:

#Elrest by MS.KH.CHAN on 2009-02-18 01:14

Dear sir,Please quote your best price for new unit KRD-40/TR-1200B/DS or repair ssr PRICE.TQBEST REGARDS,MS.KH.CHAN

#ESI by Giar on 2011-01-18 09:56

The power supply (ESI 41094B 10287) is failing, affecting the production line. Urgent repair is needed to resume operations

—> Purchase or Repair:

#Elektronikon by Jasser Dominguez on 2013-12-06 09:48

The Elektronikon Atlas Copco 1900 0700 05 controller malfunctioned today during the morning shift, leading to unexpected downtime. We need a quick resolution before the next shift. Can you please assist with identifying and rectifying the issue

—> Purchase or Repair:

#Esa/Gv by MD on 2009-10-07 03:36

ESA TRIA 6000

—> Purchase or Repair:

#Elektronikon by Lenkner on 2009-03-10 11:11

The digital readout on the Elektronikon Atlas Copco 1900070008 is constantly displaying errors and not providing accurate information. This is causing delays in production and affecting our line significantly. We need immediate attention from the repair service to resolve this issue—> …Purchase or Repair:

#Elektronikon by Balucas on 2015-07-14 21:20

The Elektronikon Atlas Copco 1900 0700 05 controller unit in the warehouse is exhibiting unusual behavior.

—> Purchase or Repair:

#ESI by Imre on 2011-03-17 13:08

The ESI 41094B 10287 Power Supply is not working.

—> Purchase or Repair:

#Eagle by suranga on 2007-02-28 22:36

The Eagle MX195S5A6 SW08220 processor is not working as reported from the shop.

—> Purchase or Repair:

#Eurotherm by Richard Moore on 2010-11-18 20:01

Eurotherm 818P4 CNX150 displaying Err 5 code, not reaching desired temperature.

—> Purchase or Repair:

#EA 1103 by STANDLEY on 2011-12-05 09:26

Hello, we have an EA 1103 94V-0 circuit board that stopped working. We need repair information quickly. Can you please provide assistance as soon as possible? Thank you.

—> Purchase or Repair:

#Elremco by Ujuan on 2006-07-18 03:02

Our Refinery in Dumai (Indonesia) have Elremco D 78 Type GL 89 Out put per rev 10 min 85 psi to control Air Dryer sistem. Untill now has broken. So we want to replace it.But we have problem to contact your agent in Indonesia. Would you to inform us about this and if the sistem obselete could you sug…...
Show More

#Efratom by P.R.Das on 2011-04-26 23:16

Hey team, the Efratom VME100-3-M160 105450-001 power supply unit went down mid-shift. Please check it out first thing in the morning. Thanks!

—> Purchase or Repair:

#Eurotherm by Jim Hershiser on 2010-04-20 22:33

The Eurotherm 818P4 CNX150 is showing error code E001 and not heating up. Please advise on troubleshooting steps or repair options.

—> Purchase or Repair:

#Elektro Mechanik Elektron Bremen by Ruben Balucas on 2012-06-28 05:01

Sir, Please send me a copy of the operation manual of the mentioned TOYO DENKI INVERTER. ( VF61V-2222-W1 )As of now I am experiencing an error which I dont know what was it because i dont have any manual for the unit.Thank youRuben

—> Purchase or Repair:

#Electrostatics Inc by Wawan Arif on 2012-06-22 09:21

We need a manual setting for:ElektronikonPartnr: P1900520011Serial: SRN1027A00114we want to install external Command on / off, but from his softward, it can not issue a comand. thank

—> Purchase or Repair:

#Emerson-Rittenhouse by rye on 2011-03-30 14:47

Can the Emerson-Rittenhouse M9070 Radio be repaired or bought? Trying to check this off my to-do list.

—> Purchase or Repair:

#Etasis by pachl on 2010-09-30 01:17

Hello, we have an Etasis IFRP-462 9273CPSU-0010 power supply that needs a replacement. Can you provide repair information for this model? We need a quick response. Thank you.

—> Purchase or Repair:

#Elektronikon by kevin thomas on 2008-07-31 18:10

Hello, I'm interested in the Elektronikon 1900 0701 24 controller. I would like to inquire about pricing and availability as I am looking to source one quickly. Thank you.

—> Purchase or Repair:

#El.Ge by Dag A on 2008-02-19 21:29

Is there anybody who has a user manual or electric wiring diagram or some information at all on this servodrive ?All help will be very much appreciated ....Best regards Dag ANorway

—> Purchase or Repair:

#Eskofot by KORALIS KOSTAS on 2010-08-22 09:57

we have an eskofot 295 DL and we want electrical plans for this model.We want to buy the plans.Can you send the plans?

#Eilersen Electric A S by Gary cramner National Concrete Design on 2012-04-16 02:33

My laser needs calibrated and one of the knobs to adjust the bubble came off. About how much would that cost?

—> Purchase or Repair:

#Elektronikon by Randy Keeth on 2008-10-17 21:22

Hey team, just a heads up that the Elektronikon controller on one of the machines has crashed. Need to troubleshoot and swap out the faulty drive or board ASAP.

—> Purchase or Repair:

#El.Ge by Ana Gomes on 2012-04-02 11:53

Good afternoon,Can you please send me price and availability of part AZE-CC4Q please?Thank you very much for your time.

—> Purchase or Repair:

#Elektronikon by Mundo on 2013-04-30 20:33

Can you please confirm if the Elektronikon Atlas Copco 1900 0700 05 controller is still supported or if replacement parts are available for it?

—> Purchase or Repair:

#Entron by Joseph Snow on 2015-12-07 00:00

Can you please provide repair information for an Entron en1000-150b? We need a replacement quickly. Thank you!

—> Purchase or Repair:

#Esa/Gv by Ro dae-ho on 2012-09-03 08:16

Hello?Serious condition of our equipment, but I wish I could show picturesI can not do that.Symptoms simply talk.On the screen when you turn on the system Base Menu display only field comingAny manipulation is impossible.In these cases, repairs can tell us would be appreciated.E-mail address attache…Purchase or Repair:

#Elektronikon by Ric Black on 2013-02-27 14:47

The Elektronikon Atlas Copco 1900070007 controller malfunctioned earlier today, causing unexpected downtime. This issue occurred at 345 PM. Please provide assistance before the next shift begins. Thank you.

—> Purchase or Repair:

#Elektronikon by Chuck Henry on 2013-09-10 23:28

The Elektronikon Atlas Copco 1900070007 controller is displaying unusual behavior. It is not functioning as it normally does.

—> Purchase or Repair:

#Elec Eltek by manseur on 2012-05-05 19:34

Bonjour,Je cherche des schémas électroniques pour les variateurs ETAZIRT(sangiacomo fantazia)

—> Purchase or Repair:

#Electro Industries by maher meftah on 2025-05-26 12:02

The Electro Industries Unknown Power Analyzer is not working.

—> Purchase or Repair:

#Elektronikon by Simon Woodward on 2015-07-06 06:58

The Elektronikon Atlas Copco 1900 0700 07 control unit is malfunctioning, impacting the production line. It's urgent that a repair service addresses this issue

—> Purchase or Repair:

#Etasis by SANTOSH on 2010-09-28 01:04

One of the drives or boards has failed in the Etasis 9273CFANMOD-00. I'll troubleshoot and work on replacing it ASAP.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.