Eltee Pulsitron for Service call 1-336-969-0110 at Industrial Electronics Repair

Eltee Pulsitron Service & Repair Forum

We are having an issue with our Eltee EP30/RD EDM. Serial Number 1268. The operator called me out saying the machine was arcing. When I got out there, the part they are burning is contained in a fixture, and the whole top of the fixture starts glowing red immediately when the electrode touches the part and smoke comes rolling out of it. They even tried shutting off all the amp switches on the front panel and it still did the same thing. I pulled all the boards to inspect and clean. I also checked all the fuses and no luck. It seems like something is shorted or there is a bad board. Could you please send me an email with what else I could check or if you need any more info?

— Posted by Eric Liseno on 2020-07-27

Reply🗨️Ask a New Question Below❓

If you need your Eltee Pulsitron unit tested or repaired,
give us a call at 1-336-969-0110.
We offer fair estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110

Recent 27 Comments

#Eltee Pulsitron by scott smith on 2010-02-26 17:03

In cut mode the ram comes down too fast and doesn\'t pulse. It crashes it the work piece. I adjusted the drift ,didn\'t help. I tried jumpping the micrometer wires . I sent in the board behined the control modual ( where the fan is ) , it needed some repair but didn\'t help. I sent the control modua...
Show More

#Eltee Pulsitron by JESUS VAZQUEZ on 2010-03-29 20:51

PLEASE CONFIRM IF YOU HAVE RECEIVED THIS EMAILWE NEED IN PARTICULAR THE SERVOVALVE.THANK YOU VERY MUCH.

#Eltee Pulsitron by Leonard Hunter on 2010-04-26 14:33

I have ELTEE servovalves in stock. It is generally cheaper to repair your valve. ELTEE used several different valves in the EP30/50 machines. I would need more information about your machine to help you further. L. Hunter

#Eltee Pulsitron by Ramon Martinez Gutierrez on 2010-05-27 03:23

tienen refacciones para una erocionadora eltee pulsitron modelo EPR30/RD requiero el cervo motor 4 tarjetas y los planos de la maquina me pueden cotizar la maquina tien aproximadamente 30 añossaludos

#Eltee Pulsitron by Steve on 2010-08-17 14:54

We have an Eltee Pulistron EP30/RDP we are looking for filters and manuals for. The power pack serial number is 1292 and the machine serial number is 380. The filters (2) are 6\" X 18\" with a 2-5/8\" hole and a 4-12\" fiber gasket top & bottom. They are steel on the outside....
Show More

#Eltee Pulsitron by Tomas Morita on 2010-08-31 20:14

May we get from you the user manual and electrical schematic for the Eltee Pulsitron Model TR-20 (EP-30/RD Control)?Tomas Morita

#Eltee Pulsitron by Howard Hall on 2010-09-10 18:25

Are these available for purchase? When changing filters, this gasket tears on occasion

#Eltee Pulsitron by Scott Wanstrath on 2011-01-14 22:19

I am also looking for the user manual and wiring schematic for a Eltee Pulsitron ep30. Please let me know if you found anything, it would be of great help.Scott Wanstrath

#Eltee Pulsitron by Brad Bagwell on 2011-06-30 16:40

hello,we have an Eltee Pulsitron EP30/RD and we\'re needing a maintenace and operations manual,do have these and if not do you know where we could get them? thank you.

#Eltee Pulsitron by sam holcomb on 2011-12-13 19:27

The Z axis stoped working.Any ideas to what caused this or how to fix it?

#Eltee Pulsitron by Alex G. on 2012-03-01 21:14

Hi,Im looking for the oil pump on a eltee TR20 EP EDM, can you help me with it? or can you point me in the rigth direction?Best RegardsAlex G.

#Eltee Pulsitron by Omar on 2012-04-02 13:08

Hi.I\'m looking for some wiring diagrams for Eltee Pulsitron\'s EP30/RD controller. Any help or insight you can provide would be greatly appreciated.Best regards,Omar

#Eltee Pulsitron by Omar on 2012-04-02 13:09

Hi.I\'m looking for some wiring diagrams for Eltee Pulsitron\'s EP30/RD controller. Any help or insight you can provide would be greatly appreciated.Best regards,Omar

#Eltee Pulsitron by Sergio González on 2012-04-12 02:57

need manuals de machine Edm eltee pulsatrion Ep 300 Cotitation pleas all the manuals operativos and electrical

#Eltee Pulsitron by Jonathan on 2012-06-11 22:48

I have an Eltee Pulsitron (EP300CP) with a vectoring head. The VMC is displaying that the head should be moving, but the head does not move. Also, the Futaba digital read out for the machine is so worn out that the symbols on the buttons have fallen off. Can you help?

#Eltee Pulsitron by terrance shermnan on 2012-06-15 02:28

My machine is showing a lot of carbon fragments when running and the result is DC arc\'s I was told that that weak capasiters csause this problem.

#Eltee Pulsitron by John on 2012-08-08 14:18

Hello, my name is John with Machinery Support in Cincinnati, Ohio. I\'m in need of a repair/parts manual for the TR20 model Eltee Pulsitron EDM. If you can quote me your price on this machine manual as soon as you have the time I\'d appreciate it greatly. Thank you for your time and consideration, h...
Show More

#Eltee Pulsitron by terrance sherman on 2013-03-13 10:25

What type and weight of hydraulic oil to use in the hydraulic sending unit located beneith the base cabnett in the bottom of the machine. The oil was red in color? Please help us and do you have o-rings seals for the head of machine and also a bellows cover to seal head ? upper and lower?

#Eltee Pulsitron by Joseph on 2013-07-15 20:44

I have had this Eltee for maybe 20 yrs.It has been a great machine. Every now and then I get this problem with the ram not coming down to cut,Sometimes just clicking the pulse,or vibration button clears it up.Iyt also seem like it happens more after the machine has been sitting,which is the case now...
Show More

#Eltee Pulsitron by DAVE LIPNICKAS on 2016-03-09 14:54

SENDING INFO

#Eltee Pulsitron by Derek Walker on 2016-08-18 21:46

I am Looking for Service Manuals & Schematics for Eltee Pulsitron TRM-41 & CNC-30. Looking for information on how the floats are suppose to function when filling the tank and draining the tank.Thank you very much,Derek Walker

#Eltee Pulsitron by william clark on 2016-10-19 13:39

We are looking for a new hose for the fluid return. The 3 in. hose from the work area to the fluid holding tank.

#Eltee Pulsitron by GLENN REVEL on 2017-04-20 20:44

I NEED TO ORDER THE SEALS FOR THE RAM ON A ELTEE PULSITRON TR-20. THE NUMBERS/INFORMATION ON THE SEAL: H2 HALLITE #8836210

#Eltee Pulsitron by Ariel Rodriguez Reyes on 2018-03-16 05:43

Hello:I have a machine:ELTEE PULSITRON ep300cpMOD. TR21 i need operationg manual, and diagrams and instruction manual.Can you help me with this???

#Eltee Pulsitron by Eric Liseno on 2020-07-27 16:18

We are having an issue with our Eltee EP30/RD EDM. Serial Number 1268. The operator called me out saying the machine was arcing. When I got out there, the part they are burning is contained in a fixture, and the whole top of the fixture starts glowing red immediately when the electrode touches the p...
Show More

#Eltee Pulsitron by robert mcilwain on 2022-01-19 20:28

we have a eltee and i need a manual for operation and also machine diagrams

#Eltee Pulsitron by Ed Ransom on 2022-05-26 20:41

I have an Eltee EP/30 RDP that the head is out of tram. Can you tram the head on these or are they fixed?

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.