Heenan Drives Ltd Service & Repair Forum

We are using your drive model no 1D9001 as a final element in a SIL 1 SIF conforming to IEC 61511.We are using the standard stop circuit to stop the motor/pump.Please can you provide the following information to enable us to complete our assessment.a)Details of the dominant failure mode of the stop circuit in its function of stopping the motor/pump.b)Probability of failure on demand figures for the equipment or failure figures and safe failure fractionc)Information on operating experience and in particular problems relating to the correct functioning of the stop circuit.

— Posted by M.Woollacott on 2007-07-09

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Heenan Drives Ltd"

If you need your Heenan Drives Ltd unit tested or repaired,
give us a call at 1-336-969-0110.
Estimates are free with an approved repair. Declined or unrepairable units are subject to a $75 evaluation, handling, and standard return-shipping fee. Extended warranties may be available.
Shipping/Receiving:
Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
Phone: 1-336-969-0110

Recent 45 Comments

#Heenan Drives Ltd by Peter John Maige on 2008-06-24 11:10
Hi all,Please, will you send the service manual of Heenan Drive Motor of 22kW 415V 3-Phase 50HZ 1480rpm Frame Size D200LXD.
➡️ Reply
#Heenan Drives Ltd by Abdulla Mohsin on 2006-01-18 07:45
Dear Sir,Kindly note that Kahramaa is electricity and water distribution corporation in Qatar and we would like to inform you that a Heenan ac variable frequency drive was installed to operate a main forwarding motor in one of our main forwarding water stations was found defective. A buring smell is…...
Show More
➡️ Reply
#Heenan Drives Ltd by Roberto A. Oszwald on 2007-11-21 15:59
Dear SirsIt is a pleasure for us to get in touch with you.We are looking for the following products, Heenan or similar:-1 Unit variable speed drive Heenan type 112/02/04, 2,2 kW 0,-1320 rpm.-1 Unit variable speed drive Heenan type 112/15/06, 1,5 kW 0,-820 rpm.-1 Unit variable speed drive Heenan type…...
Show More
➡️ Reply
#Heenan Drives Ltd by Gustavo Contreras Salzar on 2009-03-27 18:46
Hi my name is Gustavio Contreras. I work at Faurecia Mexicio as a electronic maintenance techical. I want to ask you about one Electronic Card that we need. Is a HENNAN 200/6 DSI/Dynamatic Corporation 1-800-548-2169. This item is the control brake for one clutch that we have here. I need a quote abo…...
Show More
➡️ Reply
#Heenan Drives Ltd by R.Griffiths on 2009-05-27 15:49
Please contact sales@varicon.co.uk for availability of 200/6 excitation cards
➡️ Reply
#Heenan Drives Ltd by Alf Svensson on 2009-02-10 08:34
We have a unit named Heenan Thyristor Control 76/6C wich broken. Is it possible to repair it or have it exchanged
➡️ Reply
#Heenan Drives Ltd by Keith Palmer on 2009-10-01 16:27
Does anyone know if a manual is available for the Nimrod range of Heenen Drives Variable speed drives?
➡️ Reply
#Heenan Drives Ltd by MR.ROHIT BHATIA on 2008-01-01 14:29
SPEED CONTROL CARD DOES NOT SUPPORT THE DRIVE IN VERTICAL CENTRIFUGAL MACHINE.THE SPPED CONTROL CARDS DETAILS ARE AS UNDERHEENAN DRIVES LTD., WORCESTER ENGLAND.ITEM NO.7501B/0586, CONSISTING OF THYRISTER STACK TP 8512 A AND 775563- 7434 B, 775662-7432B Cards
➡️ Reply
#Heenan Drives Ltd by ishamel Mavhenge on 2012-04-26 09:48
we have a slat conveyer in the Packing Station start up direct on line and run for 5 seconds 36 times an hour on a single packer and start up and run for 10 seconds 30 times an hour on two packers running. Maximum bags on the slat is 9There is a Natronics drive card on the system to soften start up …...
Show More
➡️ Reply
#Heenan Drives Ltd by Walter Gallo on 2008-07-14 10:24
Dear SersWe need to recive tecnical informations about ,the below \" Heenan Drives Motor\" :-1600 D4/1 w2. L231494/M. torque 34N/m. P= 5.5 kw.-180 CD4/2 L231514/M. torque 97N/m. P=15 kw.We need fo these groups the complite catalog.Thank -You in advance.Walter Gallo.
➡️ Reply
#Heenan Drives Ltd by zhangmenglong on 2007-04-23 02:51
Dear Sir, we would like to buy four pieces of Heenan 200/6 Excitation Unit (the number is £²£°£µ£­£°£°£±£µ£­£°£±), please offer me your avaliable price and the date of delivery. Urgent!!!Best
➡️ Reply
#Heenan Drives Ltd by Varicon (3D) Drives Ltd on 2008-03-25 15:58
Please contact via the above email address for information on stocks of 200/6 Excitation cards and other Heenan spares both eddy current and electronic VFD\'s
➡️ Reply
#Heenan Drives Ltd by R.Griffiths on 2008-02-15 16:21
Sir,I note with interest that some of your customers are searching for Heenan spares, especially the 200/6 excitation card. we manfacture these cards, and carry other spares. Varicon was created by ex-Heenan employees.If you are looking for a source of these or other spares for Heenan vfd\'s please …...
Show More
➡️ Reply
#Heenan Drives Ltd by s b sharma on 2012-10-19 07:51
sir we are facing one problem we are user for heenan drive part.no-CA11105C Sr.no-41242 so we are want to support for you so please arrange repaire center & new drive sorce. thanks.best regardsS.B.SHARMADVS IND PVT LTDPLOT-42 SEC-11RUDRAPURPH-09720160205
➡️ Reply
#Heenan Drives Ltd by Gavin Elliott on 2011-08-25 01:06
Hi there,I have a Heenan Adjustable Speed Drive Motor,Model Number: ACM9052-104 NO: CV912424AMotor Nominal HP: 10Amps: 14.6Phases: 3Volts: 420Revs/Min: max. 1390 min. 100Coil Volts: 32Coil Amps: 3.7Serial Number: VC052101251I would like to find out about contacts CC1, CC2, G1, G2, BC1, BC2, are used…...
Show More
➡️ Reply
#Heenan Drives Ltd by john mills on 2009-07-19 15:04
We need to run a 76 in tension control, at the moment it is running in speed . We would be most gratful if you could supply the diagram to achieve this. Kind regards. John Mills.electrical eng, custom designed cables, bolton.
➡️ Reply
#Heenan Drives Ltd by Alex Floroiu on 2013-03-30 14:29
Hello I need price for one board type \"HEENAN 200/6 EXCITATION UNIT\"or i need offer for reparing one board damange.Best regardsAlex Floroiu
➡️ Reply
#Heenan Drives Ltd by Muhammad Anwar on 2009-01-12 07:24
We have needed a 75 KW Eddy current Coupling Drive
➡️ Reply
#Heenan Drives Ltd by ssuresh on 2010-07-01 04:57
Sir,We are not having proper manual for the heenan drives 170 series please provide me the detailsplease give me the suggestion to replace the heenan excitator 170 to 200/6 and send me the quotation for the same.RegardsS. Suresh
➡️ Reply
#Heenan Drives Ltd by Liu, Chia-Ling on 2007-04-03 06:12
Dear Sir, PLEASE PROVIDE US QUOTE/DELIVERY ON THE FOLLOWING PART(S) BY RETURN FAX ASAP. NO. P/N & DESC. QUANTITY U/M ------ ------------------------------ --------- ------- 1 Heenan Variable Speed 1 PC Motor (New) Model : MV90D No.:872053-12 0.55KW Phase: 3 Hz:60 Volts : 380 Amps: 1.8 Class F YOUR E…...
Show More
➡️ Reply
#Heenan Drives Ltd by Govind Kumar on 2009-10-02 08:07
Dear Sir,We need a instruction manual of Heenan make control card for Clutch motoras below specifiction.TECH. PUB. No. 7530B
➡️ Reply
#Heenan Drives Ltd by Milind Shinde on 2007-10-17 09:12
Please Send us Operation Manual
➡️ Reply
#Heenan Drives Ltd by NISAR on 2007-06-28 07:34
Dear Sir,One of our customer urgently require following card, we request you to please urgently qutoe for following on FOB/C&F Karachi Pakistan basis.VSD CARD - SUITABLE FOR 55 KWHEENAN DRIVE MOTOR SET INPUT VOLTAGE 220 VACOUTPUT 90- 120 VDC WITH RPM MTR 0 - 1500COMPLETE WITH BOX WITH POTENSION ETC.…...
Show More
➡️ Reply
#Heenan Drives Ltd by Roberto A. Oszwald on 2007-11-21 15:43
Dear SirsIt is a pleasure for us to get in touch with you.We are looking for the following products, Heenan or similar:-1 Unit variable speed drive Heenan type 112/02/04, 2,2 kW 0,-1320 rpm.-1 Unit variable speed drive Heenan type 112/15/06, 1,5 kW 0,-820 rpm.-1 Unit variable speed drive Heenan type…...
Show More
➡️ Reply
#Heenan Drives Ltd by xin xiang on 2006-11-04 00:57
Dear Sir,We would like to buy two sets of Heenan 200/6 Excitation unit for extruded plastic machine of NETLON. Please quote the best price for us.We thank you in advance.Best regards,Xin Xiang
➡️ Reply
#Heenan Drives Ltd by schubert d\'silva on 2008-03-10 12:52
Dear Sir,Kindly confirm if you can supply us the main board for the Hennan Drive. ref: ID9001. Qty 4 nos.Kind Regards,Schubert
➡️ Reply
#Heenan Drives Ltd by Carol Heenan on 2007-11-01 21:15
A friend of my husband collects promotional mugs and acquired one of your company mugs which he gave to my husband as his surname is Heenan.I was wondering if they are for sale as I would like 4 more to give to members of my family.I look forward to hearing from you.Carol Heenan
➡️ Reply
#Heenan Drives Ltd by Rahmani on 2009-04-10 08:33
i want you give me offer foe one exitation unit 200/6 Heenan.
➡️ Reply
#Heenan Drives Ltd by ANGELA SMITH on 2007-12-05 16:29
PLEASE QUOTE FOR NEW OR RECONDITIONED UNIT FOR SIZE 76/6ORDER NO. CA901 060SERIAL NO. 13528WD NO. 411911CAT NO. EB/11436
➡️ Reply
#Heenan Drives Ltd by N L PAL on 2016-11-07 07:37
i have a drive of make- HENNAN (procotec) model- ID9001 III WANT TO REPARE THIS DRIVE. MOTOR IS NOT RUNNING , AFTER GIVING THE RUN COMMOND.
➡️ Reply
#Heenan Drives Ltd by M.Woollacott on 2007-07-09 15:33
We are using your drive model no 1D9001 as a final element in a SIL 1 SIF conforming to IEC 61511.We are using the standard stop circuit to stop the motor/pump.Please can you provide the following information to enable us to complete our assessment.a)Details of the dominant failure mode of the stop …...
Show More
➡️ Reply
#Heenan Drives Ltd by Alexandros Mihalatos on 2009-03-18 12:39
i am looking forward for a new heenan 200/6 card. Do you have any available?thanks
➡️ Reply
#Heenan Drives Ltd by PAUL GOLDBERG on 2007-09-18 19:05
NEED ELECTRONIC CONTROL BOARDS FOR BOW THRUSTER MODEL D9002 SERIAL#701575 ORDER#070642.01 BOARD MODEL#9644 SERIAL# 102716 PLEASE QUOTE ME PRICE & DELIVERY.THANK YOUPAUL GOLDBERGPH.#305-324-5211FAX#305-326-8911
➡️ Reply
#Heenan Drives Ltd by RANA AURANG ZAIB on 2010-11-02 09:57
hi dear sir i am looking quotation for heenan 200/6 excitation card witch i fix on flat sheet iron please send me asap and send me your bank detail thanks and best regardscell : 966501715786phobe : 96612411748po box no 89891riyadh 11692ksa
➡️ Reply
#Heenan Drives Ltd by Willi Haidl on 2007-07-30 11:14
Hello,do you also carry replacement cards, or new ones ?We are looking for below pcb card for one of our customers.If possible send us a quoation mentionind delivery time and shipping costs to Germany.best regardsWilli HaidlIMA Control HAIDL GmbHRosenstrasse 12D- 93128 RegenstaufHEENAN 200/6 EXCITAT…...
Show More
➡️ Reply
#Heenan Drives Ltd by ROMEO G. ALGARME JR. on 2013-06-21 14:58
Need connection manual of HEENAN drive control Board. Item 785755 issue 4.We have 2 units in URSUMCO sugar mill. Manual was damage by fire.ThanksElectrical Manager
➡️ Reply
#Heenan Drives Ltd by Cliff Hart on 2009-07-23 10:47
HelloCan you help, One of my custommers has a machine with a Heenan drive on that controlls a nip roller, there was a problem with the pot, before I had chance to replace it the custommer has adjusted all the pot\'s on the control board. Do you have any information on the operation of the board ment…...
Show More
➡️ Reply
#Heenan Drives Ltd by R.Griffiths on 2009-03-26 11:36
Alexandros,Please contact Varicon (3D) Drives ( r.griffiths@varicon.co.uk) These cards are available.Regards
➡️ Reply
#Heenan Drives Ltd by Peter John Maige on 2011-07-31 06:10
Hi all,Please, will you send the service manual of Heenan Drive Motor of 22kW 415V 3-Phase 50HZ 1480rpm Frame Size D200LXD
➡️ Reply
#Heenan Drives Ltd by Tony Matthias on 2008-03-19 15:19
We urgently need your best quotation for 3 units heenan 200/6 excitation units
➡️ Reply
#Heenan Drives Ltd by RANA AURANG ZAIB on 2010-10-31 08:43
HI SIR / MADAM I AM FACING THE PROBLEM IN CONTROL THE FLAT SHEET IRONER WITCH IS FIX YOUR BOARD BY BMM WESTON I AM LOOKING THE DETAIL OF CARD OF HEENAN 200/6WAITING FOR YOU REPLY THANKSRANA AURANG ZAIB96650171578696612411748WITH BEST REGARDS
➡️ Reply
#Heenan Drives Ltd by R.Griffiths on 2010-04-12 15:29
Please contact the above for the supply of these cards; we still manufacture them
➡️ Reply
#Heenan Drives Ltd by Minhas Naeem on 2009-12-08 07:39
we need Coils of Heenan Drive Ltd UK.please contact us at your earliest enabling us to provide you complete details.Best regards
➡️ Reply
#Heenan Drives Ltd by Aleksey on 2012-01-17 03:16
Hi!I am looking for a board (spare part) 571106À s/n 214-0231-01 202374 for HEENAN 9001 variable speed controller. Please give me information, where can i buy it.Thank you.
➡️ Reply
#Heenan Drives Ltd by Tony Ng on 2005-12-13 07:40
Dear SIr,We would like to replace four sets of 170/6 Excitation unit by a new 200/6 series.Please provide diamension, installation detail and wiring diagram for our consideration.Thank youRegards,Tony NG
➡️ Reply

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
124 Five Forks Dr PMB #208
King, NC 27021
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.