Mirtone Service & Repair Forum

I am repairing a door lock at an apartment block showing these symptoms.A transformer feeding the MA-485 is outputting 19.25 volts...will this harm the unit.It is a 16 volt amplifier.B when an apartment station depresses the door button the output at the amplifier terminals for the ac door reads 19.25 volts...but when it is released it only drops to 18.85 volts...which makes me think the relay is stuck on the amplifier.....bottom line do I need a new controller?C the electric strike shows a rating of 24 vac? how could this function well on a 16 volt system?It appears to have been part of this system for some time..and the caretaker has said there are problems with the system as far as people getting in without being buzzed. what is the lowest voltage a 24 volt buzzer could activate at?

—> Purchase or Repair: Ticket Image

— Posted by Barry Kater on 2008-02-19

Reply🗨️Ask a New Question Below❓


Recent Comments Search: "Mirtone"

If you need your Mirtone unit tested or repaired,
give us a call at 1-336-969-0110.
We offer free estimates and extended warranties on the work performed.
Shipping/Receiving:
Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
Phone: 1-336-969-0110


Recent 89 Comments

We have a mirtone EC200 installed in a 36 unit Sr. Care complex with standard call switches in each unit and a call light outside the entry door on the exterior of each unit. The system is powered with a 24VAC transformer. We would like to replace the outdoor lights with a Horn/Strobe combination un…Purchase or Repair: Ticket Image...
Show More
#Mirtone by darren kotzur on 2008-02-16 00:00
Mir-tone Assy. 72024100 motherboard not powering up, no lights or display. Need repair service ASAP.

—> Purchase or Repair:
#Mirtone by yann bedu on 2010-03-19 21:27
Mirtone 79045-2 Alarm Board is malfunctioning, urgently requires repair to resume production. Requesting immediate attention to minimize downtime.

—> Purchase or Repair:
#Mirtone by Brian Martin on 2013-07-16 04:44
The maintenance team reported that the Mirtone 79044 25412275rev7 Zone Board is not functioning.

—> Purchase or Repair:
#Mirtone by Parida on 2013-08-14 14:32
Can the Mirtone 749044 25412275rev7 Zone Board be repaired or replaced? Just trying to check this off my to-do list.

—> Purchase or Repair:
#Mirtone by Vlade on 2013-05-25 10:24
Mirtone 79044 25412275rev7 Zone Board is not functioning, production is offline.

—> Purchase or Repair:
#Mirtone by Toan on 2010-03-02 23:31
Hey, just a heads up, we've got a failed drive or board on Mirtone 79045-2 in need of your attention ASAP. Keep me posted.

—> Purchase or Repair:
#Mirtone by Remus on 2013-08-20 13:32
Board failure on Mirtone 79044 25412275rev7 Zone Board identified during maintenance rounds. Needs immediate attention to avoid disruptions.

—> Purchase or Repair:
#Mirtone by Robert on 2013-06-13 18:11
No power being supplied to the door lock. Unit is clicking when door release pressed but no power being supplies to door lock. Anyone have an answer or solution for this ?

—> Purchase or Repair:
#Mirtone by Ubaid on 2013-12-23 04:37
The Mirtone 749044 25412275rev7 Zone Board is displaying Error Code E13 and not detecting any input from Zone 3. Need urgent service to troubleshoot and resolve the issue.

—> Purchase or Repair:
#Mirtone by Ankur Patel on 2010-11-28 23:11
Having issues with the Mirtone 79045-2 Alarm Board. Need a repair technician to check and fix the industrial unit. Please respond if you can help.

—> Purchase or Repair:
#Mirtone by Bennie Johnson on 2013-11-14 01:19
Hello, could you please provide repair information for Mirtone 749044 25412275rev7 Zone Board? It has stopped working and we need a replacement. Thank you.

—> Purchase or Repair:
#Mirtone by Pavlicek on 2013-07-22 15:32
the Mirtone 749044 25412275rev7 zone board malfunctioned and needs attention. Please check and repair during the day shift. Thanks!

—> Purchase or Repair:
#Mirtone by dedra landon on 2010-09-22 10:38
Mirtone 79045-2 alarm board displaying error code E23 and preventing machine from powering on.

—> Purchase or Repair:
#Mirtone by Chris Atwater on 2013-06-28 04:23
Please provide details about the Mirtone 79044 25412275rev7 Zone Board. Is this product still supported, and are replacement parts available? Thank you.

—> Purchase or Repair:
#Mirtone by andrisol on 2010-02-16 14:51
The Mirtone 79045-2 alarm board is not working.

—> Purchase or Repair:
#Mirtone by fatah on 2013-10-02 09:55
The Mirtone 749044 25412275rev7 is not functioning properly. Please take a look and assess the issue. Thank you.

—> Purchase or Repair:
#Mirtone by Jimmy Alexander on 2010-08-21 20:30
Hello, I'm interested in purchasing a Mirtone 79045-2 Alarm Board. Could you please provide information on pricing and availability? I am looking to source one quickly. Thank you.

—> Purchase or Repair:
#Mirtone by Alireza on 2013-04-04 16:02
Hello, I have a client in need of assistance with a Mirtone 79044 25412275rev7 Zone Board. They are experiencing issues and would like to gather more information on troubleshooting and repair options. Could you please provide details on how to address this problem? Thank you.

—> Purchase or Repair:
#Mirtone by Berketis Loukas on 2013-01-18 08:41
Hello, I am looking for assistance with a Mirtone 79044 25412275rev7 Zone Board. Can you please provide information on troubleshooting or repairing this part for my client? Thank you.

—> Purchase or Repair:
#Mirtone by tim stokolosa on 2009-01-17 14:06
My customer has an 8 floor.20 suite/floor mirtone system with pull stations in all suites.each suite is decoded in the mirtone on each floor and then on the first and second floor there are two master stations to decode the floor number. The system is only local to the caretaker.The owners want all …Purchase or Repair: Ticket Image...
Show More
#Mirtone by Korin on 2010-08-22 11:57
Mirtone 79045-2 alarm board not powering on, halting production.

—> Purchase or Repair:
#Mirtone by MATHUR on 2010-11-08 22:31
Hi there, I need repair info on a Mirtone 79045-2 Alarm Board that stopped working. Can you please provide guidance on how to fix or replace it? Thank you!

—> Purchase or Repair:
#Mirtone by rosemary on 2025-06-06 13:08
Could you please provide repair information for a Mirtone QSP218 50064 Circuit Board? We need a quick answer for a replacement. Thank you!

—> Purchase or Repair:
#Mirtone by DENNIS M GOMEZ on 2010-08-15 20:41
Hello, I am inquiring about a Mirtone 79045-2 Alarm Board for a client. They are experiencing issues with it and would like to know if you are able to provide repair services for this specific part. Thank you.

—> Purchase or Repair:
#Mirtone by Maryellen Kucera on 2013-06-11 17:43
Do you have a Mirtone 749044 25412275rev7 Zone Board available for sale or repair? Need to get production back up quickly.

—> Purchase or Repair:
#Mirtone by bruneau on 2013-07-17 06:44
Mirtone 749044 25412275rev7 Zone Board not responding.

—> Purchase or Repair:
#Mirtone by William Arndt on 2010-08-06 08:33
Could you please provide me with pricing and availability information for the Mirtone 79045-2 Alarm Board? I am looking to source one quickly and would appreciate your assistance. Thank you.

—> Purchase or Repair:
#Mirtone by Jack McCUrdy on 2013-09-11 12:28
Unit 25412275rev7 (Mirtone 79044) zone board is malfunctioning. Needs attention ASAP. Please check and reset during AM shift.

—> Purchase or Repair:
#Mirtone by R.Jim White/WSM on 2007-05-08 23:21
Hi...I have one customer with no voltage to the door striker but have confirmed the striker works. Transformer is ok! Do you have the parts for this, relay etc to ship so I can repair it or do you have a re-conditioned unit for sale. The seniors in thecomplex want it yesterday..Can you help?R.Jim Wh…Purchase or Repair: Ticket Image...
Show More
#Mirtone by SPYROS C MASTER on 2013-09-24 05:48
Unit 79044 25412275rev7 (Zone Board) went down mid-shift. Need follow-up during the day.

—> Purchase or Repair:
#Mirtone by mahrndra on 2010-08-23 05:39
I'm reaching out regarding Mirtone 79045-2 Alarm Board. Could you please provide details on troubleshooting or repair options for this part? Thank you.

—> Purchase or Repair:
#Mirtone by Badut Ancol on 2013-08-11 16:35
The Mirtone 79044 25412275rev7 Zone Board in the warehouse is not functioning as expected. It is exhibiting unusual behavior and not operating normally.

—> Purchase or Repair:
#Mirtone by bethel graphics on 2013-05-16 19:54
The Mirtone 749044 25412275rev7 Zone Board in the warehouse is not functioning as usual. It is displaying unusual behavior, but I am not certain what the specific issue is.

—> Purchase or Repair:
#Mirtone by DENNIS LOPEZ on 2013-07-01 08:47
Mirtone 749044 25412275rev7 Zone Board not responding, production offline.

—> Purchase or Repair:
#Mirtone by Sghedoni Giorgio on 2010-08-18 08:40
Could you please confirm if the Mirtone 79045-2 Alarm Board is still supported or if replacement parts are available? Thank you.

—> Purchase or Repair:
#Mirtone by Faisal Riaz on 2013-06-28 01:23
The maintenance team reported an issue with the Mirtone 79044 25412275rev7 Zone Board. They need assistance troubleshooting it.

—> Purchase or Repair:
#Mirtone by Lorena Reyes on 2010-11-18 13:17
My Mirtone 79045-2 alarm board is malfunctioning, and I need a technician to repair it

—> Purchase or Repair:
#Mirtone by Barry Kater on 2008-02-19 00:23
I am repairing a door lock at an apartment block showing these symptoms.A transformer feeding the MA-485 is outputting 19.25 volts...will this harm the unit.It is a 16 volt amplifier.B when an apartment station depresses the door button the output at the amplifier terminals for the ac door reads 19.…Purchase or Repair: Ticket Image...
Show More
#Mirtone by street on 2010-09-29 21:17
The Mirtone 79045-2 alarm board is malfunctioning, causing delays in production. Immediate repair service is needed to avoid further disruption to the production line. Please address this issue urgently.

—> Purchase or Repair:
#Mirtone by jarvis on 2013-07-14 08:57
Could you please confirm if the Mirtone 749044 25412275rev7 Zone Board is still supported or if replacement parts are available for this unit? Thank you.

—> Purchase or Repair:
#Mirtone by Volker Schmidt on 2013-04-06 08:57
The Mirtone 749044 25412275rev7 is a Zone Board unit, but I'm not fully familiar with it yet. Maintenance team reported that the unit is not working and needs attention.

—> Purchase or Repair:
#Mirtone by Christiane Larouche on 2009-05-17 13:44
please send manual mirtone ec200 but tone stop laps time small please send me why do it the time = laps time long.ThanksJ\'aimerais savoir comment faire pour mettre le signal sonore sans interruption automatique. C\'est à dire que je veux l\'arrêter moi-même. Merci

—> Purchase or Repair:
#Mirtone by steve reyes on 2013-08-10 05:35
Do you have a Mirtone 79044 25412275rev7 Zone Board available for sale or repair? Our unit is down, and we need to keep production running. Thank you.

—> Purchase or Repair:
#Mirtone by Aguinaldo on 2010-04-15 17:33
Do you have a Mirtone 79045-2 Alarm Board available for sale or repair? Our unit is down, and we need to get production running again as soon as possible. Thank you.

—> Purchase or Repair:
#Mirtone by Basheer on 2013-03-16 22:15
Need repair for Mirtone 79044 25412275rev7 Zone Board. Not functioning, looking for technician to fix industrial unit

—> Purchase or Repair:
#Mirtone by Agarwal on 2013-04-05 13:46
I'm experiencing some issues with the Mirtone 749044 25412275rev7. It seems like the machine has stopped functioning properly. Can you help troubleshoot the problem?

—> Purchase or Repair:
#Mirtone by Travis Brown on 2019-09-20 18:15
The Mirtone 71269F fire alarm panel unit isn't functioning. Maintenance team needs to check it.

—> Purchase or Repair:
#Mirtone by lalji on 2013-08-08 19:32
I am following up once again regarding the Mirtone 749044 25412275rev7 Zone Board issue. The unit is still down. Please provide an update at your earliest convenience.

—> Purchase or Repair:
#Mirtone by sambilay on 2010-02-11 09:26
Unit 79045-2 alarm board malfunctioned mid-shift. Please have a technician check it in the morning.

—> Purchase or Repair:

Contact Us

🚑Shop Location🛠️

Industrial Electronic Repair
145 Rockwell Place Ct
Tobaccoville, NC 27050
🚑 Rush repair shipments only — no walk-ins.

📞Phone

1-336-969-0110

📦Mailing Address🚛

Industrial Electronic Repair
931-E S. Main St #204
Kernersville, NC 27284
📦 Mailing Address (for invoices or shipped repairs)
No walk-ins accepted.